4.8/5
Custom Extra long 6 Foot Length (1.82) can be cut to size for all your applications
American Made High Quality Rubber Hose Max 60 PSI @ 70 F Max Temperature of 175F/93C
¼ inch inside diameter (.64 CM) and ½ inch outside diameter (1.27)
For transfer of petroleum products fuel lines vapor emission lines and vacuum smog control
For use in mowers tractors snow blowers dirt bikes and just about all small engines
$234
On a 13500 gas-powered generator I owned, the other fuel line dry rotted in less than six months. I reside in Southwest Arizona's High Desert, which is not very friendly to rubber, paint, or plastic products. Things get Very Brittle, Very Fast under the Ultra-High Heat of "138F Degrees" this Past Summer, "Unofficially of Course," with the Ultra-Low Humidity of "0.01% or 1/10 of a%." We'll see what transpires come July and August of 2019 because the Fall and Winter months are a little less intense.
4.7/5
WON’T LEAK – When installed correctly, the Original Deluxe won’t leak.
LIFETIME GUARANTEED Original Manufacturer since 1997. We believe in our products and will repair or replace at no extra charge, no questions asked.
Every single part of this product is proudly MADE IN THE U.S.A.
ORIGINAL DELUXE QUALITY - Includes an integrated filter. Clear PVC Hose designed with UV Stabilizer to take on the sun and heat longer. Upgrades most racing gas can and fuel jugs.
$234
Compared to the one that comes with the VP racing gas jugs, I preferred this filler tube. Compared to the factory VP filling tube, which lacks a tiny screen at the base, it appears to be more durable. I've seen other reviews where people complained about the portion breaking, but since I always tie my fuel jugs down so they won't tip over or hang freely anywhere, I'm not sure if I'll experience that problem. This part has now been used about five times without any problems.
4.2/5
$234
It has been a few months, and I haven't yet encountered any issues. It starts out a little stiffer, but after you start moving it around and fiddling with it, it becomes more flexible. Overall, I'm pretty happy. I will buy more.I used it, among other things, to run the carburetor's breather line to the air intake box (picture) If you do this, exercise caution because the machine's performance may be impacted by the fluctuations in pressure at the intake box. Everything will be fixed if you simply pull the tube outside of the intake.If I run into any issues, I'll let you know, but so far, so good.Update: I removed the tubing from the intake box's outside and everything is now functioning perfectly. The reason for the four stars is that the tubing was initially a little stiffer, but I still adore it.
4.1/5
Package includes:9.8 Feet(3m) 1/4" ID Fuel Line,20 X 2/5" ID Hose Clamps
Designed for conveying gasoline, E-85, diesel, and bio-diesel, fuels in mowers tractors snow blowers dirt bikes and just about all small engines
For transfer of petroleum products fuel lines vapor emission lines and vacuum smog control
Fuel line:1/4 inch inside diameter (0.64 CM) and 1/3 inch outside diameter (0.8CM)ï¼›Hose Clamp for 1/4-inch and 3/16-inch Fuel Filter with an Inner Diameter of 2/5-inches
The Fuel Lines are oil resistant,cold-resistant and ethanol tolerance;Custom Extra long 9.8 Foot Length (3M) can be cut to size for all your applications
$234
On a Cub Cadet LT 1525, I utilised this gasoline line to replace a broken line that had been a real pain in the neck to track down. I really appreciate that it included the clamps, which fit precisely and were simple to set up with standard pliers. I thought the cost was extremely fair, and the line seemed to be of great quality in addition to being soft and convenient to use. Additionally, it arrived in "fresh" condition; it doesn't seem to have dried out before shipping as has happened in the past when it has remained in warehouse heat or on a shelf.
4.1/5
All products shipped are tested.
Direct replacement to your original unit. Plug-and-play, direct fit, easy installation.
The quality exceeds the OEM equipment
Brand new & high quality
$234
For my Suzuki GZ250, a new fuel petcock was required. I first got one for my bike, but I returned it since I didn't like or trust it, so I ordered this one instead. It is just a straightforward off-on-reserve without a vacuum port, which is great with me, and it costs approximately half as much as the alternative. Similar to the stock petcock, it mounts.It's no difficulty for me to plug the carburetor's suction port. The fact that I can truly cut off the fuel supply and that it doesn't require suction to operate when it is on pleases me. The delivery was also much quicker than with the other.
3.8/5
Fuel Tube Hose Inside Diameter: 5mm
Package:4pcs Spring Clips and 1pcs Red fuel hose line and 2pcs fuel Filters
Fuel hose line length: 100cm
$234
Everything needed for a simple installation is supplied. appears to be high-quality. three gasoline filters were included. Only the addition of clamps might make it better. had enough of hose for my TaoTao.
3.7/5
100% polyurethane fuel hose
Low temperature fuel line that is not affected by sub-zero temperatures
Repair worn leaking fuel line
Blue fuel tubing hose
Available in 5’ rolls
$234
This fuel line pipe is more expensive than the regular black hoses, but I believe it is worthwhile for a few reasons. First, it is both robust and flexible. It is simple to route and pull across constrained areas. Additionally, it extends effectively over barbs. The second benefit is that you can see inside it to check for obstructions or debris. It's fantastic that you can also see the fuel. Since you can see that the hose is in good condition and that the fuel is flowing, it takes one of the variables out of the equation when troubleshooting. With this buy, I'm quite pleased. Anyone in need of a few short lengths of fuel line should definitely try this, in my opinion.
3.7/5
100% polyurethane fuel hose
Blue fuel tubing hose
Low temperature fuel line that is not affected by sub-zero temperatures
Repair worn leaking fuel line
Available in 5’ rolls
$234
This fuel line pipe is more expensive than the regular black hoses, but I believe it is worthwhile for a few reasons. First, it is both robust and flexible. It is simple to route and pull across constrained areas. Additionally, it extends effectively over barbs. The second benefit is that you can see inside it to check for obstructions or debris. It's fantastic that you can also see the fuel. Since you can see that the hose is in good condition and that the fuel is flowing, it takes one of the variables out of the equation when troubleshooting. With this buy, I'm quite pleased. Anyone in need of a few short lengths of fuel line should definitely try this, in my opinion.
3.7/5
Blue fuel tubing hose
Low temperature fuel line that is not affected by sub-zero temperatures
Repair worn leaking fuel line
100% polyurethane fuel hose
Available in 5’ rolls
$234
This fuel line pipe is more expensive than the regular black hoses, but I believe it is worthwhile for a few reasons. First, it is both robust and flexible. It is simple to route and pull across constrained areas. Additionally, it extends effectively over barbs. The second benefit is that you can see inside it to check for obstructions or debris. It's fantastic that you can also see the fuel. Since you can see that the hose is in good condition and that the fuel is flowing, it takes one of the variables out of the equation when troubleshooting. With this buy, I'm quite pleased. Anyone in need of a few short lengths of fuel line should definitely try this, in my opinion.
2.8/5
Dual check valves allow priming in multiple orientations without restricting fuel flow.
Note: This is rubber product, please do not store this item under direct sunlight or other rough environment.
Compatible with ethanol blended fuels, Engineered low permeation material prevents fuel evaporation, Suitable for Boats, RVs, Tractors, and Caravans.
Universal Fuel Line - 3/8"(10mm)Hose with 6ft long line.
Premium quality rubber bulb with Nylon Braided line hose.
$234
This fuel line pipe is more expensive than the regular black hoses, but I believe it is worthwhile for a few reasons. First, it is both robust and flexible. It is simple to route and pull across constrained areas. Additionally, it extends effectively over barbs. The second benefit is that you can see inside it to check for obstructions or debris. It's fantastic that you can also see the fuel. Since you can see that the hose is in good condition and that the fuel is flowing, it takes one of the variables out of the equation when troubleshooting. With this buy, I'm quite pleased. Anyone in need of a few short lengths of fuel line should definitely try this, in my opinion.
COPYRIGHT © 2019