A crane is a machine that is used to lift and move heavy objects. Cranes are used in a variety of settings, including construction sites, warehouses, and factories. Cranes come in a variety of sizes, and can lift a variety of weights. The largest cranes can lift up to 1000 tons.
A HIAB is a type of crane that is attached to the back of a truck. It is used to lift and move heavy objects. In order to operate a HIAB, you must have a valid driver's licence and be trained in how to use the equipment.
A 100 ton crane can reach up to 80 feet without jib, and up to 140 feet with jib.
A 300 ton crane can reach up to approximately 400 feet. This reach is dependent on many factors such as the type of crane, the terrain, and the load being lifted.
5/5
3 ton hydraulic jack
Base swivels 360°
All steel construction
Boom stores over wheel well when not in use
Boom extension locks in 4 positions
$234
I retrieved my fifth wheel hitch from the rear of my truck using my crane. This gives me complete access to my truck's bed. It takes some effort to remove and install the hitch because it weighs roughly 160 pounds. To remove it, normally two guys are needed. I was looking for a single-person method of removal and replacement. Aside from relieving the tension on our backs, I completed the transfer by successfully removing it and placing it on a trolley. No arching the back. Definitely worth the cost.
3.8/5
ã€Powder Coated Finish】It is painted with glossy corrosion-resistant and anti-rust paint, which can be used both indoors and outdoors. With this feature, it is also very easy for you to clean.
ã€Useful Lift】This lift could lift almost any gas engine and some smaller diesel engines. Useful for moving heavy parts such as axles, transmissions and transfer cases around the shop.
ã€Adjustable Positions and Easy Storage】There are 4 adjustable positions for your different work needs: 0.5Ton ,1Ton ,1.5Ton and 2 Ton. Equipped with 8-ton ram hydraulic cylinder, it can be used for long time. The foldable design is good if you are looking for an easy cranes to store.
ã€Heavy Gauge Structural Steel】This engine hoist is made of heavy duty structural steel, durable and sturdy to keep its shape and also very safe when use. With the solid steel construction, it has 4000 lb closed boom capacity and 1000 lb extended boom capacity.
ã€360º Swiveling Wheels】There are six durable wheels on the lift, which can be rolled around and swung in any direction. It provides maximum maneuverability and it is a good choice for moving heavy parts.
$234
Works well, but the assembly design is not to my taste. The upper hinge and the lower piston mount both have a lot of motion. Is there something I missed during assembly? To pick up the slack, I'm going to insert several thick washers. Or perhaps that's the reason I received so many washers?You can watch my timelapse of me putting the hoist together below! (3 minutes approximately)
3.8/5
ã€Useful Lift】This lift could lift almost any gas engine and some smaller diesel engines. Useful for moving heavy parts such as axles, transmissions and transfer cases around the shop.
ã€Adjustable Positions and Easy Storage】There are 4 adjustable positions for your different work needs: 0.5Ton ,1Ton ,1.5Ton and 2 Ton. Equipped with 8-ton ram hydraulic cylinder, it can be used for long time. The foldable design is good if you are looking for an easy cranes to store.
ã€360º Swiveling Wheels】There are six durable wheels on the lift, which can be rolled around and swung in any direction. It provides maximum maneuverability and it is a good choice for moving heavy parts.
ã€Powder Coated Finish】It is painted with glossy corrosion-resistant and anti-rust paint, which can be used both indoors and outdoors. With this feature, it is also very easy for you to clean.
ã€Heavy Gauge Structural Steel】This engine hoist is made of heavy duty structural steel, durable and sturdy to keep its shape and also very safe when use. With the solid steel construction, it has 4000 lb closed boom capacity and 1000 lb extended boom capacity.
$234
Works well, but the assembly design is not to my taste. The upper hinge and the lower piston mount both have a lot of motion. Is there something I missed during assembly? To pick up the slack, I'm going to insert several thick washers. Or perhaps that's the reason I received so many washers?You can watch my timelapse of me putting the hoist together below! (3 minutes approximately)
3.8/5
Folded Dimensions: 58in x 37in. x 22in. so you can Store it in the corner and save space
(6) Fully Rotating 3" Steel Caster Wheels Easily allow you to move this hoist in any direction
Easily use the hand pump or use air power and push a button to lift up to 4000 lbs
4000 LB closed boom capacity and (48" inches maximum height)
1000 lb extended boom capacity and (102" inches maximum height)
$234
A vintage gas engine that I recently moved from the West Coast. I was terrified by the cheap, weak engine hoist we used to load it. To unload the engine once I got it home, I realized I needed the engine hoist, which I had been seeking. The old engine weighs a little bit less than the 1000# maximum capacity of this hoist. When I got home, I put the hoist together and positioned it so I could remove the engine from the U-Haul trailer. The engine was easily lifted by the hoist, which was able to roll with the engine hung when the boom was fully extended. Although I haven't tried using air to run the hoist, the manual pump works flawlessly. I don't think this engine hoist has any issues. I'm happy I purchased it.
3.5/5
Three boom capacities: 500, 750 and 1000 pounds ;Product Dimension: 54.00 x 20.00 x 9.75 inches
No permanent installation or drilling required. Crane Swivels 360 degrees.Swivel part/assembly must be removed when vehicle is in motion.
Easily move heavy generators, pressure washers, barrels and more in and out of your truck bed
Lift range: 30 Inches to 84 Inches.Swivel part/assembly must be removed when vehicle is in motion.
The Maxxtow hydraulic receiver hitch mounted crane is the first portable and affordable unit of its kind
$234
Problem: I need to use my Generac 8000E generator to power lights in the church parking lot for a "trunk or treat" event. It is 255 lbs. heavy. To get it to church, I need to load it onto my wife's GMC Sierra 2500 HD, then unload it. the MaxxHaul 70238 Receiver Hitch Mounted Crane, which has a lifting capacity of 500 pounds at the crane's end and 1,000 pounds near to the hydraulic jack. UPS delivered the Amazon order in two days. Took around an hour to build after being removed from the damaged delivery box. Although there were little instructions, the images helped put everything together. There were one additional lock pin and hitch pin, and no parts were missing. After assembly, I attached two axle straps to the generator's frame, hoisted it up with the crane, and set it down on the truck's tailgate. The MaxxHaul crane was disassembled into three sections and put in the truck bed along with the genny, which was rolled into the bed and secured with straps. I drove to church, put the crane back together in about two minutes, and then took the generator out of the truck. Two young men loaded the genny onto the vehicle for me after the event. I brought the crane home, put it together again (it only took a minute this time, practice makes perfect), pulled the generator out of the truck, disassembled it into its three major components, and put it away in the garage in preparation for the next lifting task. Additionally, this will be helpful for loading the pressure washer and the fifth wheel sliding hitch, both of which are too heavy for this elderly man to load and unload by himself. This crane's presence opens up a lot of opportunities.
3.4/5
4000 lbs lifting capacity provides enough power to level a variety of engines
A crank handle can be operated with one hand to help maneuver engines around the engine compartment at the angle you need
Allows for easy engine handling and positioning
Works with engine hoists, shop cranes and cherry pickers. An essential tool for mechanics or for those that work on vehicles for racing or a hobby
Made with high durable steel lends strength and durability, 2 chain supports offer added strength and space for accommodating engines of different sizes
$234
The product performed as expected, although it can be difficult to find little sections of chain that won't fit V-8 engines. To make it work, I had to go to the hardware store and pay an additional $30. Really, no adaptor plates, only chain pieces? A poorly built handle spins off in the middle of the adjustment. Okay if patient and unhurried. However, if I were to do it over, I would choose a better product.
A HIAB can reach up to 18 metres, making it perfect for lifting and transporting large loads. Its telescopic arm means it can also be used in tight spaces, making it a versatile piece of equipment.
A 50 ton crane can typically lift between 40 and 50 tons.
A crane truck can lift up to 20 tonnes, making it ideal for construction and demolition work.
A HIAB can lift up to 44,000 pounds.
A HIAB license typically costs around £300. However, the price can vary depending on the company you approach and the location of the training.
A truck crane is a crane mounted on a truck chassis. They are commonly used for bridge construction and other large-scale construction projects. Truck cranes range in height from 30 to 50 feet (9 to 15 m). The height of a truck crane is limited by the height of the truck chassis and the length of the crane boom.
COPYRIGHT © 2019