No, not all Jeeps have 7 slots in the grill. Some have less, and some have more. The number of slots in a Jeep's grill is usually determined by the model and year of the Jeep.
To install a grill insert on a Jeep Wrangler, you will need to remove the old grill and insert the new one in its place. Start by removing the screws that hold the grill in place. Then, pull the grill out and away from the Jeep. Next, insert the new grill into the opening, making sure that it is properly aligned. Finally, replace the screws to secure the grill in place.
A grille insert is a decorative piece that is placed over the opening of a grille. Grille inserts come in a variety of designs and can be made from different materials, such as metal, plastic, or wood.
The seven slots on the Jeep grill stand for the seven different continents that Jeep vehicles have been driven on.
4.8/5
Use it to add some style and attitude to your Jeep
Hooke Road Jeep Wrangler Grille Inserts fit for 1997-2006 Jeep TJ Wrangler & Wrangler Unlimited
Installs securely in seconds with automotive grade adhesive tape
Crafted from high quality ABS plastic and will not rust, corrode or peel
Installation tips: pop the upper grille lock pins so you can access the grille from behind. Then press, twist, and manipulate the grill and insert until each clip is fully engaged
$234
The product is well-made and fits well. There were no gaps in any of the 7 slots, and the components fit tightly. I think it looks acceptable that these are placed against the outside of the grill's seven slots rather than inside of them. The double-sided tape was difficult to use for two reasons: (1) it didn't seem to be pressed against the inserts very well; as a result, I advise pressing the tape down against the inserts before removing the protective backing because doing so could cause the tape to come completely off the insert; and (2) the tape is cut every inch or so to make it easier to go around curves, which makes it time-consuming to pull the protective backing off completely. Although it doesn't lower the rating, the review is sincere. Overall, I'm quite satisfied.
4.7/5
High quality ABS plastic and will not rust, corrode or peel.
Package include: 7pcs of Front Grille Grill
Pop the upper grille lock pins so you can access the grille from behind. Then press, twist, and manipulate the grill and insert until each clip is fully engaged
Use it to add different style and attitude to your car.
Grille Inserts fit for Jeep Wrangler JK JKU 2007-2015.
$234
Installing the product wasn't too difficult. The directions were rather simple to understand. The sticky pads did not always stick, and because of how the engine is made, the last one I inserted on the driver's side will not snap in with pressure. When you press against the side, a part that is blocking the attachment will prevent the component from attaching. To get around this, you must reach from below and exert resistance so that the part will snap into place. When installation, it is advised to start with the two parts that are farthest away on the driver's and passenger's sides and work your way in.
4.6/5
Custom fit applications for each trucks, cars and SUVs.
❎ *2009-2014 Ford F-150 (Not For Harley Davidson And Raptor)
Air craft grade 6061-T6 aluminum solid billet grille inserts can protect the front end of your vehicle. Whole black powder coating with a neat surface.
❎ Bolt Over/Overlay/Bolton 1 pc Grille Insert. Each grille guarantees a whole black satin powder coating with a neat surface.
❐ Note: We will automatically upgrade your order to Stainless Steel grille insert for free when Aluminum grille goes out of stock.
$234
This grill is ideal for patching the F150 truck's front bumper hole. When I purchased my 2013 F150, it had a hole in it that gave the impression that something was missing.Solid metal was used to create this grill. The ribs' fronts are made of chrome, while the remainder of them are coated in black for high corrosion resistance. Compared to the plastic hood grill that comes standard on F150s, its quality is significantly better.I am confident that because of its endurance, it will effectively shield my radiators from harm as roadside debris and boulders fly in the direction of the truck.Instructions: This comes with horrible printed instructions. However, figuring out how to mount it is not difficult.It may be mounted using the two tabs on the bottom, which slid into the bumper's pre-existing slots. Additionally, it includes two top tabs with holes that fit the mounting tabs on the bumper. To place this grill, no holes must be drilled in your bumper.Additionally, mounting hardware is included. I substituted my own washers, bolts, and locknuts because I did not like their hardware. Compared to using their arrangement, I thought this was more secure. I included a picture of the procedure I used. To fit the proper size bolts in this grill, I had to drill larger holes in it. The attachment tab holes on the truck bumper, however, are substantial and did not require drilling.This grill needs to be fastened from the bumper's backside. If you have a fender installed underneath your bumper, getting to this location is difficult. I opened the hood and entered from the top. Another reason I used my own hardware was that it was simpler to use wrenches to fasten it than it was to hold a screwdriver.Due to this product's high quality construction and attractive design, I am extremely delighted. I uploaded a picture of it placed on my truck, but Amazon ultimately decided to remove all customer pictures of the items.
4.5/5
Note: Not fit for like 75 anniversary and other a few 2016/2017 models that already have inserts in the front grill
The mesh grille Inserts fit for 2007-2015 Jeep JK Wrangler & Wrangler Unlimited
Made of high quality ABS plastic and paint or chrome treated
Installation tips: pop the upper grille lock pins so you can access the grille from behind. Then press, twist, and manipulate the grill and insert until each clip is fully engaged
The clip-on grille inserts install more firm than the self-adhesive grille
$234
We've only had them in for two days, but thus far, we think they're a terrific value given the cost, ease of installation, and somewhat altered but nonetheless improved appearance of the grill. 2014 Sahara Unlimited fits perfectly, no issues. As others have stated, make sure you know which way is up and which is down when installing the grill because the bottom has a larger "lip" that needs to go over the material at the bottom of the slot. In Syracuse, it was a rare sunny day, so I took off the adhesive strips and spread the pieces out so the glue would dry tacky before clipping them in. Installing the grill does not need you to pop out the body clips, although doing so made it simpler, particularly on the last few. Before applying strong pressure for a few seconds to the sides with adhesive strips to fix them, you should get your fingers behind the grill to check if the clips are fastened. Once inside, they are quite safe and gorgeous yet not over the top. Overall, a cost-efficient improvement.
4.5/5
FEATURES - Personalize your jk with a black color grille accent to transform your look, perfectly fits inside stock grille.
CONSTRUCTION - Made of High Quality Steel, Strict Factory QC test,High Strength and rust resistant.
EASY INSTALLATION - No drilling required, Easy to install,Perfectly fits inside your stock grille.
FITMENT - Fit Jeep Wrangler Rubicon Sahara Sport Jk 2007-2018.
FUNCTION - Protect your radiator from debris while on or offroad, Perfect ventilation Design allows airflow to your engine and radiator for optimal performance.
$234
simple to install Remove the strain Release the tabs keeping the bottom of the Jeep grille in place on the drivers side by gently pulling the top of the grille forward and pushing the pins holding them in place ( I left the other side attached ). Put everything back together by sliding the grille piece behind the Jeep grille. To make sure the insert sits all the way down and the given notch is in the right spot, you may need to move it around a little. It will fit snugly since that is how it is meant to fit and how it will stay in place.The double grill on my 2017 Sahara Smokey Mountain Edition belongs to me (came with the glossy black inserts in the grille). I was worried that the tabs on the back of the grille, which are specific to Sahara models and come with the black or silver inserts, would make it impossible for me to use this item without some changes, but once it was properly inserted behind the Jeep grille, it fit wonderfully. It didn't need to be cut or altered. It fits snugly, which is fantastic because it prevents movement. The grill's notch properly encloses the connectors. adore itlooks fantastic, offers the required protection, and permits adequate ventilation. I'm very happy I made this purchase.
4.4/5
Protection:Protect your Jeep JK from the hazards of brush, stones, and other trail debris
Fitment:2007-2018 Jeep Wrangler JK JKU Rubicon Sahara X sport Unlimited. Driver and passenger side are included
Simple Installation:These Hooke Road Cowl Body Armors are designed to install simply with the supplied 3M doubled sided automotive bonding tape for a quick and secure installation. Thoroughly clean the surface and then simply peel the 3M tape from the back of the Guards and set them firmly in place
Material:High quality ABS construction, textured black finished, lightweight, superior durability and impact resistance
No-hassle 2-Year Warranty Against Manufacturing Defects
$234
I had dented cowl panels like many other Jeep JKU owners and was looking for a solution that would hide the dents and offer more protection. Cowl body armor from Hooke Road has surpassed my expectations.1: The merchandise is identical to what is seen in the pictures. It is made of diamond-plate-finished black plastic. Jeeps are already tough; this only makes them appear more so.2: The setup was simple. You may check their fit before installing them by removing them from the box and placing them on the cowls. Remove the tape, attach them to the cowl, push firmly, then stand back and take in their attractive appearance.3: No more tape is necessary. I utilized the pre-installed tape, and once pressed against the cowl, they were completely impervious to the I-15, Interstate speeds of more than 80 mph, and truck gusts. I've repeatedly given them a 3000 psi pressure washer blast, and I haven't experienced any problems with them coming loose.No fading (4). These cowl guards are still as black as they were when they were first opened, despite the sun in Las Vegas being terrible to anything exposed to it. No UV problems at all.This is among the best inexpensive modifications I've ever done to my Jeep. Overall, they perform as intended and endure quite well.
4.3/5
Note: This set of grille inserts won't directly fit any special editions like 75th anniversary that already have inserts.
Crafted from high quality ABS plastic and will not rust, corrode or peel
Installation tips: pop the upper grille lock pins so you can access the grille from behind. Then press, twist, and manipulate the grill and insert until each clip is fully engaged
Matte Black Mesh Grille Inserts fit for 2007-2015 Jeep Wrangler JK & Unlimited
Package included 7 PCS clip-in grille inserts
$234
These appear nice. Having read numerous other reviews in which they had either fallen out or had clips break during installation, I was concerned that they might do so.Having said that, I didn't remove my grill. Installing them, I began on the driver's side and moved over the grill. To support the back of the grill as I pressed these inserts in, I inserted my other half through the slots. When it snaps into position, you can hear an audible "click." For the final one, I just inserted the insert while reaching up through the grill's bottom. been using it for two weeks without any issues. No clips broke during installation, either.
4.3/5
[UNIQUE DESIGN]:Use it to add some style and attitude to your Jeep Definitely a cool and inexpensive modification to any Jeep,it'll enhances the look of any Jeep!
[PACKAGE]:7pcs Grill Inserts
[FITMENT]:For Off Road 2&4 Doors Jeep Wrangler & Unlimited 2007-2015 Rubicon Sahara sports JK JKU.
[EASY INSTRALLATION]:Without drilling or tools.
[CONSTRUCTION]:Crafted from durable ABS plastic and will never rust,corrode or peel and will not fall down. Also could protect the condenser or radiator behind the grille from the big stone or rock.
$234
We have a Jeep Wrangler JK, and my husband and I have learnt a very costly lesson! Our radiator was damaged when a pebble entered the grill through its large teeth. Only $700 short of $800! service charge, we learned from the forums that others had suffered the same fate and had suggested similar items. I took a gamble and bought this one, and we are overjoyed. They literally just click into place and out of it. They have never popped out despite my taking our Jeep through multiple car washes. Saving thousands at the dealership is worth a small investment in them!
4.1/5
❎ Bolt Over/Overlay/Bolton 3 pcs Grille Insert. Each grille guarantees a polished chrome color front surface and black satin powder coating back.
Air craft grade 6061-T6 aluminum solid billet grille inserts can protect the front end of your vehicle.
All necessary hardware and instruction are included. Grille insert only, logo or emblem, frame or shell is NOT included.
❎ 1999-2004 Ford F250/F350/F450/F550 Super Duty/2000-2004 Ford Excursion
Sleek aluminum billet grille inserts come in horizontal bar styles. Custom fit applications for each trucks, cars and SUVs.
$234
VERY attractive Billet Grill! Instead of being light and flimsy as you might anticipate given the low price, it is actually VERY heavy duty. Definitely, the cost is justified. It required little work and little money to change the appearance of my truck. The mounting is a little bit clumsy, but it does the job. Be careful not to tighten too much. The two side grill parts didn't appear to fit as well as I would have thought and I installed mine on top of an excursion grill, which is what was on my 2001 F250, but it still functions and looks fantastic. The centre insert was exactly placed and looks great. It arrived intact because of the excellent packaging. I looked everywhere, and I'm sure that this is the greatest billet insert option you can get for the money. Anybody should try it, in my opinion.
4/5
❎ Bolt Over/Overlay/Bolton 3 pcs Grille Insert. Each grille guarantees a polished chrome color front surface and black satin powder coating back.
Air craft grade 6061-T6 aluminum solid billet grille inserts can protect the front end of your vehicle.
All necessary hardware and instruction are included. Grille insert only, logo or emblem, frame or shell is NOT included.
❎ 1999-2004 Ford F250/F350/F450/F550 Super Duty/2000-2004 Ford Excursion
Sleek aluminum billet grille inserts come in horizontal bar styles. Custom fit applications for each trucks, cars and SUVs.
$234
We have a Jeep Wrangler JK, and my husband and I have learnt a very costly lesson! Our radiator was damaged when a pebble entered the grill through its large teeth. Only $700 short of $800! service charge, we learned from the forums that others had suffered the same fate and had suggested similar items. I took a gamble and bought this one, and we are overjoyed. They literally just click into place and out of it. They have never popped out despite my taking our Jeep through multiple car washes. Saving thousands at the dealership is worth a small investment in them!
A Jeep grill is a metal grille that covers the front of the Jeep to protect the engine. It also provides a place to mount the Jeep's headlights.
A mesh grille is a type of grille made from interwoven metal wires. Mesh grilles can be used as decorative elements on the front of a car or truck, or they can serve a functional purpose, such as protecting the radiator from debris.
The Jeep Wrangler JL is the fourth generation of the Jeep Wrangler off-road vehicle. Unveiled at the 2017 Los Angeles Auto Show on November 29, 2017, production of the vehicle started in November 2017. The JL features a revised exterior design, including new fender flares, a longer wheelbase, and a revised grille and headlights.
Under the sun inserts are located on the lower back of the sun.
There are seven holes in a Jeep grill for a variety of reasons. Some say that the holes are there to allow the engine to cool more efficiently. Others say that the holes help the Jeep to climb over obstacles more easily. Whatever the reason, the seven holes in a Jeep grill have become synonymous with the Jeep brand.
JL fenders are a direct fit for the JK. They will not require any modifications to be made to the JK in order to install them.
COPYRIGHT © 2019