Yes, you can use normal hinges on a gate. There are a few things to keep in mind, though. The first is that the weight of the gate will determine how sturdy the hinges need to be. Heavier gates will need stronger hinges. The second is that the height of the gate will also affect the hinges. Taller gates will need longer hinges. And finally, the width of the gate will also play a role in the type of hinges you'll need. Wider gates will need wider hinges.
Most gate hinges are installed on the inside of the gate, away from the street or public area. This is done for several reasons. First, it makes the gate appear more aesthetically pleasing from the outside. Second, it keeps the hinges away from the elements, which can cause them to rust over time. Finally, it makes it more difficult for someone to tamper with the hinges from the outside.
There are many factors to consider when choosing a hinge for your project. Some hinges are designed for specific applications, such as doors, cabinets, or gates. Other hinges are more versatile and can be used for a variety of applications. Here are a few things to keep in mind when choosing a hinge: 1. Function - What is the hinge going to be used for? Make sure to choose a hinge that is designed for the specific application you have in mind. 2. Material - Hinges are available in a variety of materials, including steel, brass, and aluminum.
If your heavy gate is sagging, there are a few things you can do to fix the issue. First, check the hinges to see if they are loose. If they are, tighten them with a wrench. If the problem persists, you may need to replace the hinges. Another solution is to add a diagonal brace to the gate. This will provide additional support and help to keep the gate from sagging.
4.9/5
Easy to install, Easy to remove, Easy to adjust position, No screw no holes in your door
RSF coating protects wrought iron for years to come.
Made of ABS with Rust Iron finish
4 hinges and 2 handles faux hardware with strong magnet,instant curb appeal.
Magnetic Garage door 2 handles(9 1/8 inches long) and 4 hinges(15 1/2 inches long).
$234
They're excellent! Magnets are powerful, but they can be moved about easily. Without having to drill holes or deal with adhesives, it was simple for me to experiment with alternative places and choose what looked best. Docking one star because, of the five sets I bought, one handle had an ineffective magnet that wasn't magnetic at all. The "magnet" is present; it is only not magnetised. I'll need to pry that out and put a new one in. But other from that, I think these are fantastic and the price is unbeatable!
4.8/5
Authorized Replacement for Stanley Hardware Stock #N129-767
2 pack
Designed for use on gates, utility sheds, barn doors, etc.
Adjusts to correct gate sag
Strap punched for 5/16 In.Or 3/8 In. bolts
Gate can be lifted off the screw hooks
$234
I'm now assembling my own gates. They will be hung using this hardware. They apply 3/8 "carriage bolts (not included); purchase the required length. For the carriage bolts, the square-cut holes line up perfectly. Although we had to buy the necessary washers, nuts, etc., we anticipate that these will hang extremely well in the end.Despite what is advertised, the product is fairly enormous; in person, they appear and feel much more substantial.The screw-in bolt side was mounted into a 7 "Onto a 2x4 frame, a treated post and the bar side will bolt. As soon as I have some time off work to finish the project, I'll post some images.
4.5/5
Tested and verified to withstand extreme weather conditions
For new installations: use with National's #291 or #293 hooks
Strap punched for 3/8" bolts
To be used as a replacement piece for National's #29 or #229 hinge
Strap punched for 5/16 inch (6 or 8 inch sizes) or 3/8 inch ((10, 12, 14, 16, 18, 20 and 24 inch sizes) bolts
Manufactured from hot-rolled steel
Mounting bolt NOT included
$234
A wooden gate was successfully fastened to a metal fence. My gate hardware's stock pin had to be changed to a stepped pin. In comparison to ordinary gate hardware, this latch requires a wider diameter.The gate swings after a fast adjustment and is quite strong. a 4 ft x 6 ft wood gate was fastened to an already-existing chain link fence rail post.
4.5/5
Heavy-duty construction minimizes gate sag and provides free operation
Authorized Replacement from National Hardware Stock #N109-031
The strong, fully enclosed spring closes gates or doors automatically and is adjustable
2 pack
Ornamental design; Lags matching finish are included for mounting
Tight pin allows right or left hand applications
8-inch heavy-duty black spring T-hinge
$234
A 6' stockade fence gate needed some repairs, so I chose to replace the rusted old hinges with spring hinges to bring it up to local standards. Although I had my doubts, the hinges did a respectable job of closing the massive gate, even in the face of a strong breeze. The latch would typically engage as the gate slowly closed. They are straightforward to install, and it is very easy to change the spring tension.I installed a Stanley CD1295 11" Gate Spring to increase the closure force and guarantee that the latch engaged every time. The gate now closes firmly and always latches thanks to the hinges and gate spring.
4.3/5
2 Complete sets, 1" Width x 3/16" Gauge
Pin Diameter: 5/8"
For chain link fence Gate Frame Sizes 1-3/8"
Connects to Chain Link Fence Gate Frame
Hot-dipped Galvanized Finish
$234
These were required so that I could repair a gate where the hinges were the wrong size and eventually failed. Although our MRO supplier provides a wide variety of items, they do not, for some reason, carry the 1-7/8 size (which is a pretty common size), thus it was good to locate these here on Amazon. These were ideal replacements. They were a great replacement component because they fit flawlessly.
3.9/5
BEST CHOICE TO REHANG A GATE---Ideal for shed doors, driveway gates, corral gates, wood windows and more.Fits various lumber sizes (2x4's, 2x3's, 2x6's, etc.)
SAFETY GUARANTEE---Full refund for any manufacturing defects.If there are any concerns,please contact us without hesitate.
SOLID BRACKET---Made of galvanized steel powder coated black.ASTM B117 Salt-Spray tested and passed.Mofeez no sag gate bracket kit will last a long time even in a high salt environment.
EASY INSTALLATION---Come with mounting hardware and step by step assembly ebook instruction.No angle measure required.Refer to our detailed manual,I believe you could finish your job in less than 30 minutes.
NO SAGGING GATES HERE---Durable Construction brace building brackets to hang your gates well.Good craftsmanship,not as slim as other gate accessories brackets.Â
$234
To build a double gate, we bought two boxes (or two kits). The initial kit produced a single door that worked well and was well-made, with clean, precise welds. The second kit, on the other hand, featured a mixture of decent and nearly good welding, but one crucial vertical alignment bar was cocked over (and welded at) an angle of about 10 degrees, making it impossible to attach to the wood or square the door at all. The hinges on both the second kit seemed to be out of alignment and difficult to open and shut. It required a lot of rubber mallet labor to free them up (paint may have been saturating the hinge). After providing images and contacting the firm through Amazon, I received an immediate replacement. Fantastic new set. Here's a crucial reminder for you: I compared this kit on Amazon to one made by a different manufacturer that I found at Home Depot; while the kits were fine, the welds were sparse/minimal and certain parts were spot welded.
3.7/5
Designed for 2x4 or 4x4 post applications
Designed for applications with narrow mounting surfaces, such as gates, barn and shed doors, storage bins, and tool boxes
Tight pin allows right or left hand applications
Offset screw holes allow for extra strength and to prevent wood from splitting
Authorized Replacement for Stanley Hardware Stock #S172-200
Can be used on full or half surface applications
Offset screw holes for extra strength and to prevent wood from splitting
$234
These were utilised by me to create a sandbox. The sandbox's lid may be folded out into seats thanks to the hinges. They are quite nicely crafted and operated flawlessly. The only issue I have is that some of the screws I was using would just pass through some of the hinge's somewhat larger screw holes. Washers had to be added. Even though these hinges don't come with screws, I didn't mind because of the cost. When I looked around for hinge prices, I was unable to find a lower price per hinge. After a few months, I'll give you an update on how they are holding up.
3.7/5
Adjustable: Spring tension; Use the swing adjustment tool inside the series of small holes around the top of the hinge and place the stop (small rod) inside the hole to hold it in place; There is also a bolt that can be tightened and loosened based on your desires
Durable: Constructed from zinc plated steel with a black powder coat for strength and longevity; Both the post flange and gate flange are 3.5†x 3.25†x 1.5†(8.9cm x 8.3cm x 3.8cm)
Easy Installation: Use the included 1" (2.5cm) self-tapping metal screws for installation on your vinyl fence; If using on a wooden gate you will need wood screws (not included)
Practical: The 7Penn Self-Closing Black Gate Hinge 2-Pack with Installation Screws and Swing Adjuster Tool – Outdoor Vinyl / Wood Fence closes automatically behind you and is designed to easily fix a sagging or dragging gate and achieves a perfect, swinging gate with a gate and latch that will always stay aligned
Contents: Package includes (2) hinges + (22) vinyl installation screws (not for wood) + (1) swing adjuster tool
$234
Excellent hinges are needed for pool enclosure gates. Excellent tension, thick gauge metal, and well-built construction. My 6-foot-tall, 3-1/2-foot-long, timber privacy gate was easily closed by the pair. closed with just the correct amount of pressure such that the gate remained simple to open. Although the spring tension can be changed, I found that the predetermined tension was ideal for my purpose. comes with screws, however I had to use longer ones to attach it to the fencing because there wasn't enough solid wood. These are far preferable to unattractive springs or other more expensive options, in my opinion. Good value for a fantastic product.
There are several ways to support a heavy gate. One way is to use posts and brackets. Another way is to use a chain.
A gate should be high enough off the ground that it cannot be easily jumped over, but low enough that it can be opened and closed by someone of average height.
There is no definitive answer to how much space should be between a post and a gate. However, as a general rule of thumb, it is recommended that there be at least 6 inches (15 cm) of space between the post and the gate. This will ensure that the gate is able to swing open and closed without hitting the post, and will also provide enough space for the latch to engage properly.
A 10 inch T hinge can hold a lot of weight, depending on the material it is made out of. If it is made out of a stronger metal, like steel, it can hold a lot more weight than if it is made out of a weaker metal, like aluminum.
A gate hinge is designed to support a certain amount of weight, depending on the size and material of the hinge. A small metal hinge can support up to 50 pounds, while a larger steel hinge can support up to 150 pounds.
There are four main types of hinges classified by their applications: butt, strap, knife, and piano. Butt hinges are the most common type of hinge. They are generally used for doors and lids and are attached to the door and frame with screws. Strap hinges are used for heavier doors, such as garage doors, and are made of thicker metal with bigger screws. Knife hinges are thinner and used for small doors, such as cabinets. Piano hinges are long and continuous, making them ideal for piano lids and other heavy objects.
COPYRIGHT © 2019
