If you have a broken headlight cover, you may be able to drive your car, but it is not advisable. Headlight covers are there to protect your headlights and keep them clean. If your headlight cover is broken, your headlights may be more susceptible to damage from debris or rocks. It is best to replace your headlight cover as soon as possible.
Yes, you can vinyl wrap your headlights. This is a popular mod among car enthusiasts because it can give your car a unique look. There are a few things you need to keep in mind before you vinyl wrap your headlights, though. First, make sure you clean the headlights thoroughly before you start. Any dirt or debris will show through the vinyl wrap. Second, be careful not to stretch the vinyl wrap too much. If you stretch it too much, it will start to wrinkle and will not look as good.
If your headlight cover is cracked, scratched, or otherwise damaged, you may be wondering if you can replace just the cover. The answer is yes, in most cases you can replace just the headlight cover. However, depending on the severity of the damage, it may be cheaper or easier to replace the entire headlight assembly. This is something you'll want to discuss with your mechanic or auto body shop. In some cases, replacing just the headlight cover can be a fairly simple and straightforward process. However, if the damage is more severe, it may be
Yes, you can replace plastic on headlights. There are many companies that make replacement parts for headlights, and many of them make plastic parts. You can find these companies online or in your local yellow pages.
4.6/5
Simple Installation, Agressive off-road Style
Durable Automotive Grade ABS Construction
Colour:Bright Black
Decorate the Jeep Charming Luxury Vivid
Fits 1997-2006 Jeep Wrangler TJ Models
$234
After removing the three torx head (t15) screws holding the OEM chrome bezel in place, simply rotate the bezel a little by hand to release it, and it will pop out. Use the new black phillips head screws to install the new black bezel, which glides on and rotates a little by hand to align the holes. Done. Installing both bezels takes around five minutes from beginning to end. I photographed the new bezels after they were placed. The quality and workmanship appear to be excellent!
4.5/5
Easy no-drill installation
Compatible with OE and most aftermarket headlights
Sleek satin black powder coat finish
Sturdy cast aluminum construction
Stylish, geometric design
$234
On my Rubicon Gladiator with LED package, this wonderful item is comparatively simple to install. I think the price is too exorbitant, and it appears to have been installed a little slanted, which is why I gave it four stars. Maybe it's just my eyes, I dunno. See the images for yourself to decide whether my assertion is true or incorrect.
4.1/5
Made with automotive grade cast vinyl, these tints are 80% tinted smoke or 20% VLT. The adhesive is acrylic based which will not eat through plastic like other tints on the market. It is 100% chemical safe, and will not eat through headlight coatings or damage your lights.
This is the only film on the market that can wrap ANY SHAPE. It is super conformable with heat. It was originally manufactured for hard-to-wrap surfaces, but the ease of install has professionals saving time on any headlight shape.
This film is also self healing and scratches will go away with heat! Simply cut the vinyl to shape, and apply it to the surface. To make the vinyl conform to curves, simply heat with a heat gun or hair dryer, stretch and apply. Lastly, using a sharp blade, trim away excess from the headlight and you're done! its literally that simple!
VVIVID Air-Tints are an industry first: a headlight/taillight tint with all of the technologies developed in VVIVID+ premium materials. They include an air-release membrane which allows you to install the tint dry ( without installation liquid ) Ready to use out of the box!
NOTE: MAKE SURE TO MEASURE YOUR HEADLIGHTS AND ORDER ENOUGH VINYL TO WRAP THEM
$234
To start, this is a fantastic and incredibly simple product to work with, and there is a TON of space for error. Initially, I only purchased this to use with my headlights.I simply trimmed off the excess I had from installing the headlights where I was using to pull because I had planned to go darker on the turn signals but I wanted to see how they looked first. After sticking it on the turn signals, I thought, "Hmm... looks okay," and I put it on without any problems. I then applied heat to remove the wrinkles, and it was finished.With the product I had trimmed off during installation, it took me about 5 minutes to attach both turn signals. It's quite forgiving, even though the turn signals didn't have to be particularly clean or obvious due to their design or location. But WOW, it was simply as simple as cutting off the excess piece from the headlight installation and putting it on the turn signals. Added the middle emblem as well.Because I didn't plan to clean the turn signals, I just placed them on to see if I preferred this hue or wanted to go darker.It's not as crystal clear as other hues because of the orange peel look caused by the air channels in the tint. But I'm okay with it, and although I tried to capture it, it's only apparent from a distance and certain angles. However, the EASE of installation comes first. According to CKWraps, they will disappear in a few weeks due to the lights' heat. Will provide an update if they do disappear.I'll give it a shot with my tail lights next to see how it seems.I wasn't sure they were dark enough at first, but after looking for a bit, I'm happy I didn't go much darker. I don't want to deal with being stopped by the police.Overall, I'm really pleased with the outcomes and installation's simplicity.
4.1/5
VViViD Headlight tints are designed to conform and stretch around difficult surfaces.
These films have a natural air-release pattern on the backing to make installation a breeze.
High quality vinyl is scratch, grime, water and dirt resistant.
Large enough to fit virtually any size of headlight and can be custom cut to the necessary shape.
$234
To start, this is a fantastic and incredibly simple product to work with, and there is a TON of space for error. Initially, I only purchased this to use with my headlights.I simply trimmed off the excess I had from installing the headlights where I was using to pull because I had planned to go darker on the turn signals but I wanted to see how they looked first. After sticking it on the turn signals, I thought, "Hmm... looks okay," and I put it on without any problems. I then applied heat to remove the wrinkles, and it was finished.With the product I had trimmed off during installation, it took me about 5 minutes to attach both turn signals. It's quite forgiving, even though the turn signals didn't have to be particularly clean or obvious due to their design or location. But WOW, it was simply as simple as cutting off the excess piece from the headlight installation and putting it on the turn signals. Added the middle emblem as well.Because I didn't plan to clean the turn signals, I just placed them on to see if I preferred this hue or wanted to go darker.It's not as crystal clear as other hues because of the orange peel look caused by the air channels in the tint. But I'm okay with it, and although I tried to capture it, it's only apparent from a distance and certain angles. However, the EASE of installation comes first. According to CKWraps, they will disappear in a few weeks due to the lights' heat. Will provide an update if they do disappear.I'll give it a shot with my tail lights next to see how it seems.I wasn't sure they were dark enough at first, but after looking for a bit, I'm happy I didn't go much darker. I don't want to deal with being stopped by the police.Overall, I'm really pleased with the outcomes and installation's simplicity.
4.1/5
VVIVID Air-Tints are an industry first: a headlight/taillight tint with all of the technologies developed in VVIVID+ premium materials. They include an air-release membrane which allows you to install the tint dry ( without installation liquid ) Ready to use out of the box!
This is the only film on the market that can wrap ANY SHAPE. It is super conformable with heat. It was originally manufactured for hard-to-wrap surfaces, but the ease of install has professionals saving time on any headlight shape.
This film is also self healing and scratches will go away with heat! Simply cut the vinyl to shape, and apply it to the surface. To make the vinyl conform to curves, simply heat with a heat gun or hair dryer, stretch and apply. Lastly, using a sharp blade, trim away excess from the headlight and you're done! its literally that simple!
Made with scratch-resistant automotive grade cast vinyl, VVIVID Air-Tints were developed in Canada to reduce the risk of shrinkage and peeling almost completely! The adhesive is acrylic based which will not eat through plastic like other tints on the market. It is 100% chemical safe, and will not eat through headlight coatings or damage your lights.
NOTE: MAKE SURE TO MEASURE YOUR HEADLIGHTS AND ORDER ENOUGH VINYL TO WRAP THEM
$234
To start, this is a fantastic and incredibly simple product to work with, and there is a TON of space for error. Initially, I only purchased this to use with my headlights.I simply trimmed off the excess I had from installing the headlights where I was using to pull because I had planned to go darker on the turn signals but I wanted to see how they looked first. After sticking it on the turn signals, I thought, "Hmm... looks okay," and I put it on without any problems. I then applied heat to remove the wrinkles, and it was finished.With the product I had trimmed off during installation, it took me about 5 minutes to attach both turn signals. It's quite forgiving, even though the turn signals didn't have to be particularly clean or obvious due to their design or location. But WOW, it was simply as simple as cutting off the excess piece from the headlight installation and putting it on the turn signals. Added the middle emblem as well.Because I didn't plan to clean the turn signals, I just placed them on to see if I preferred this hue or wanted to go darker.It's not as crystal clear as other hues because of the orange peel look caused by the air channels in the tint. But I'm okay with it, and although I tried to capture it, it's only apparent from a distance and certain angles. However, the EASE of installation comes first. According to CKWraps, they will disappear in a few weeks due to the lights' heat. Will provide an update if they do disappear.I'll give it a shot with my tail lights next to see how it seems.I wasn't sure they were dark enough at first, but after looking for a bit, I'm happy I didn't go much darker. I don't want to deal with being stopped by the police.Overall, I'm really pleased with the outcomes and installation's simplicity.
4.1/5
Please search "Hooke Road black" if you want other black accessories
Matte Black Finish
Durable Automotive Grade ABS Construction
Aggressive Off-Road Styling
Fits 2007-2015 Jeep Wrangler JK Models
$234
After the grill was taken off, the headlamp bezels simply snapped in. They fit well, and installation, including removing the grill, took around ten minutes. Although you might not even need to remove the grill, I would advise doing so. I accomplished so since I was simultaneously installing the grill inserts, making it simpler to simply withdraw the grill so I could check that everything snapped in properly, which they all did. The Jeep's front has undergone a modest modification, but it looks amazing. gives my Jeep a mild growl without becoming overly hostile. That looks great!, the child said, so I suppose it's cool. LOL!
4.1/5
These films have a natural air-release pattern on the backing to make installation a breeze.
Large enough to fit virtually any size of headlight and can be custom cut to the necessary shape.
VViViD Headlight tints are designed to conform and stretch around difficult surfaces.
High quality vinyl is scratch, grime, water and dirt resistant.
$234
To start, this is a fantastic and incredibly simple product to work with, and there is a TON of space for error. Initially, I only purchased this to use with my headlights.I simply trimmed off the excess I had from installing the headlights where I was using to pull because I had planned to go darker on the turn signals but I wanted to see how they looked first. After sticking it on the turn signals, I thought, "Hmm... looks okay," and I put it on without any problems. I then applied heat to remove the wrinkles, and it was finished.With the product I had trimmed off during installation, it took me about 5 minutes to attach both turn signals. It's quite forgiving, even though the turn signals didn't have to be particularly clean or obvious due to their design or location. But WOW, it was simply as simple as cutting off the excess piece from the headlight installation and putting it on the turn signals. Added the middle emblem as well.Because I didn't plan to clean the turn signals, I just placed them on to see if I preferred this hue or wanted to go darker.It's not as crystal clear as other hues because of the orange peel look caused by the air channels in the tint. But I'm okay with it, and although I tried to capture it, it's only apparent from a distance and certain angles. However, the EASE of installation comes first. According to CKWraps, they will disappear in a few weeks due to the lights' heat. Will provide an update if they do disappear.I'll give it a shot with my tail lights next to see how it seems.I wasn't sure they were dark enough at first, but after looking for a bit, I'm happy I didn't go much darker. I don't want to deal with being stopped by the police.Overall, I'm really pleased with the outcomes and installation's simplicity.
4.1/5
Precision Computer Pre-Cut Vinyl Film
Includes: Left & Right Side Headlight & Foglight Tint Overlays
Gloss Surface with Adhesive Backing
$234
wonderful product changes I'm amazed with how much harder my truck appears for such a small investment. The initial item took a little while to figure out, but once you get the hang of it, it's fairly simple. However, avoid using soapy water. From a distance, it is impossible to tell that I used Windex on the second two and soapy water on the first two, but up close, there are noticeably more little bubbles. Less on the Windex front, I love these tent covers because even if I mess up, I just peel it off, add more Windex, and start over, and it still looks amazing. I didn't have to cut anything, and if you put them on right, the cuts were done flawlessly.
4.1/5
Package included: 2 x headlight covers (left & right)
Fitment: 2007-2017 Jeep Wrangler JK & Unlimited
This is not to replace your factory grille, it is just inserts to change its current look.
Easy clip in installation, no cutting or drilling required.
Material: ABS Plastic With Black Finished, never rust
$234
These, in my opinion, are essential. A stone or any other object could readily damage the cooling radiators due to their open design. These give it a fantastic factory look and added protection. You CAN press them into position and hear it click into place without removing the grill. You can't go wrong for the low price, therefore it's a no-brainer!
3.4/5
Includes 2 x Vinyl Car Stickers. Color: Light Black. Material: vinyl. Size: 12" x 48"/ 30 x 120cm. Thickness: 0.15mm.
This Taillight Tint Film gets Three layers: 1. Sticker film (remove before installation); 2. Color film; 3. Protective film (can be removed after installation).
Protect your car lights from scratch, yellowing, outer damage. Make your car difference from others.
Superior transparency, light transmittance up to 90 percent.
Self-adhesive. Easy to remove without any residual. Flexible and Water resistant, will not fade, chip, crack nor peel.
$234
Great stuff that does great, but I couldn't get it on the first time. In any case, I would purchase it again.
There is a lot of debate on whether or not headlight covers actually work. Some say that they do provide some protection for your headlights, while others claim that they do not do anything to prolong the life of your headlight. Ultimately, it may come down to personal preference as to whether or not you want to use headlight covers.
Coke can clean your headlight covers! All you need to do is pour some Coke into a bowl, and then use a clean cloth to rub it onto your headlight covers. The Coke will remove any dirt or grime, and leave your headlight covers looking like new!
If you have a broken light on your car, you can cover it with tape or a piece of cloth. You can also buy a new light at a store.
If your headlight covers are looking dull, you can restore them to their original clarity with a little elbow grease and the right supplies. You'll need to clean the covers with soap and water, then sand them down with fine-grit sandpaper. Once they're smooth, you can apply a clear coat to protect the headlight covers and keep them looking new.
If your plastic headlight covers are looking dull, you can restore them to their original clarity with a little elbow grease and the right cleaning supplies. All you need is some plastic polish and a soft cloth. Start by polishing a small section of the headlight cover with the plastic polish. Then, use a clean, soft cloth to buff the area until it's shiny. Repeat this process until the entire headlight cover is clear.
It usually takes about 30 minutes to replace a headlight cover.
COPYRIGHT © 2019
