4.6/5
MEASURES 21" W x 13 3/8" D x 6 1/4" H
EASY TO ASSEMBLE. And disassemble
SUPPORTS UP TO 250 LBS. Sturdy yet lightweight
VIEW YOUR TV AT ANY ANGLE. Sturdy stand has a revolving base to allow for smooth rotation
EXTRA SPACE WITH BOTTOM TIER. Store DVD, Cable Box and more.
$234
Although I wasn't sure I would enjoy having my TV on a swivel stand, I adore it. I was worried that my 45" TV wouldn't be stable and would probably tip over if I moved it, but it is; in fact, I can move the TV with just one finger and there is no swaying or feeling that it will fall. Additionally, I didn't need to locate another spot for my cable box because it fit perfectly into the lower shelf. On the table where I have the TV and stand, everything is extremely organized. The stand is well-built and simple to put together.
4.5/5
LIFETIME WARRANTY! Our products are made of 100% high impact ABS material & steel ball bearings while other inferior swivels are made of a softer Polypropylene for case and bearings which is so much softer (and less expensive) that heavy items will dent them and they eventually will no longer turn smoothly.
Need a larger swivel? Search for SWV-ALL-10, SWV-ALL-12, SWV-ALL-15 or BIG-SCREEN-SWVL up to 21x16" available.
Suitable for any size Notebook Computer, Plants, Arts & Crafts. Works great for monitors, TV's, Stereo Speakers, Full 360 degree Rotation Supports up to 80 lbs.
On Sale! Buy now and save! To protect our brand reputation, we have NOT authorized any other sellers to sell our products on Amazon, including those sellers "Fulfilled by Amazon". Please protect yourself against counterfeits. When you receive the order, please check to see it has the authentic LapWorks brand (that we have applied to every product). If it's counterfeit, you have the right to ask for a full refund.
We have tested our swivels through 10,000 operation with varying weight loads and they have never shown any wear or denting by the ball bearings regardless of the amount of weight loaded onto them. Non-skid, non-scratch rubber pads. Steel ball bearing quality 0.6" Thin Profile.
$234
I got my son this for his spray studio as a gift. His was becoming too stiff due to frequent use and paint application. When I opened it and gave it a try, it would not freely rotate like a typical Lazy Susan does unless you put a lot of weight on it. I disassembled it to inspect the lubrication and discovered what was causing it to revolve slowly. The Lazy Susan is supported by an inexpensive plastic ring that has four ball bearings inserted into it. The plastic the bearings were pushed into was too tight, and even though it was oiled, I was concerned that if I removed any of it, the bearings wouldn't remain in. It worked fine when I tried it with a small TV. This indicates that you shouldn't experience any problems if you purchase it to spin on a larger device. There won't be enough weight on it if you buy it to spray your models with for it to spin easily.
4.5/5
3 YEAR MANUFACTURER WARRANTY - This product comes with a limited 3-year Manufacturer warranty as well as friendly tech support to help with any questions or concerns.
FRIENDLY MATERIAL - E1 grade materials offer strength and moisture resistance in case of accidental spills and are safe for the environment
TOP & BOTTOM SURFACE - The top and bottom platforms measure 18" x 15.25". Space beneath top surface provides plenty of room for a cable TV box, DVD player, gaming system, and more!
SIMPLE ASSEMBLY - Setup is easy and all necessary assembly hardware has been included. Recommended maximum screen size with this stand is 42†and maximum weight capacity is 88 pounds
360° ROTARY BASE - Enjoy the freedom to view your TV from any angle with the effortless 360 degree spin feature
$234
After using it for a short while, we can now change stations without having to stand up or raise our hands high. The TV's sensor was being blocked by a sound bar we had. This is substantial enough for our 40" television, and the interior shelf accommodates the 4" sound bar. It rotates nicely. For a smoother swivel, I advise spraying WD40 on the swivel before setting it up. It might have gone on longer. We are happy with it even though my TV stand extends about an inch past each end and the sound bar is about 4 inches off the stand.
4.5/5
Package includes: mounting hardware and template also a lifetime of your TV's gratitude
Heavy duty steel: CE Certified steel supports screens up to 110 lbs. Visa mounting pattern compatible
Lift n' Lock: mounting Has never been so easy! 30 minute 3-step installation with all necessary hardware included and pre-divided
Articulating: 5 degrees up and 8 degrees down tilt provide maximum viewing flexibility and avoids glare
The low-profile design allows to hold your TV only 2. 5†from the wall. 16†and 24†wood studs compatible
$234
sufficient for my 32" LED HD TV, perfect. Installation was really simple and quick. It is fixed to a wall stud by me. The hex screws that were included were large.Yes, the screws that came with the bracket were just a little too short to reach the TV's internal threads. In the event that the supplied screws don't fit properly, prepare to head to the hardware shop (Lowes carried the perfect size/length screws for my TV). No manufacturer can supply enough varied lengths of screws to meet the varying mounting hole depths on all flat screen TVs. Don't let the reviews on here convincing you that it was tough to install and that it was difficult to get the proper screws fool you; it was simple to obtain them. It isn't.For any flat screen TV, I would strongly suggest this device (as long as it doesn't weigh more than 50 pounds; if it does, check out the corresponding ExpertPower mounting bracket/arm). This bracket and arm's construction is more than adequate and quite sturdy, and the cost is very fair.
4.4/5
Limited warranty
No assembly required
Black finish
Durable and strong steel ball bearing swivel
Sturdy 16 mm thick particle board platform with woodgrain melamine veneer
$234
I have a heavy HDTV with a strange, fin-shaped base that is nearly 20" long. I only wanted it on a long bookshelf instead of the table or mountable version that was intended. To be able to see it from various locations around the room, I required a swivel base, so I purchased several. Before I discovered this Single Tier Extra Large Swivel TV Turntable, NONE were strong or long enough. It gives stability to my TV as I spin it this way or that and is good quality without being heavy. After returning a few others, I am overjoyed to have discovered the best one! Thank you, Amazon, for coming through once more.
4.3/5
TV SWIVEL BASE: Enjoy the perfect TV viewing angle no matter where you sit with the effortless 360 degree spin feature.
HEAVY DUTY: 8 mm thick tempered glass base sits on a 10" diameter revolving base using steel ball bearings for smooth operation.
STABLE AND SECURE: Measuring 23.5 x 15.75 inches, it is suitable for even larger TVs. Includes non-slip, non-scratch rubber traction pads that keep TVs steady during rotation.
EASY 360 ROTATION: Eliminates the need to wall mount a TV to achieve swivel function. Keep your existing TV stand without drilling holes on your wall.
NO ASSEMBLY REQUIRED: Revolving TV stand is ready to use right out of the box with no assembly needed.
$234
Since I needed to gently adjust the angle to view the screen from the side, I purchased this TV swivel. The item arrived exactly as stated and completely matched the base of my 55" Panasonic Plasma TV. The TV doesn't always stay in the location I set it at, despite the fact that I only move it a few inches to the right. To keep it from moving after it was set, I had to place something at the base. The device appears to be made of good quality materials and swivels quite smoothly in every other respects.
4.2/5
STABLE AND SECURE: Measuring 23.6 x 15.3 inches, it is suitable for even larger TVs up to 50" or 88 lbs. Includes non-slip, non-scratch rubber traction pads that keep TVs steady during rotation.
EASY 360 ROTATION: Eliminates the need to wall mount a TV to achieve swivel function. Keep your existing TV stand without drilling holes on your wall.
NO ASSEMBLY REQUIRED: Revolving TV stand is ready to use right out of the box with no assembly needed.
STRONG AND STURDY: 23 mm thick wood base sits on a 10" diameter revolving base using steel ball bearings for smooth operation.
TV SWIVEL BASE: Enjoy the perfect TV viewing angle no matter where you sit with the effortless 360 degree spin feature.
$234
I got it so I could move the TV in our game room between the racing chair arrangement and the standard gaming chair. As soon as I cracked open the box, I saw that two of the three screws were coming loose. Further examination revealed that the third screw was also not installed correctly. They had used too-small and too-short screws, so I went to the neighborhood big-box hardware store, discovered a three-pack of wood screws, bought two packs, but the longer ones worked just as well. Therefore, since the 3/4 inch screws were not quite long enough, you need to purchase three #8 x 1 inch screws. The finer brass ones strangely came in a three-pack, so I got those.I was taken aback because I typically get all of my TV mounting supplies from Mountains. I used their equipment to mount my 65-inch TV on the wall and my 49-inch TV on the wall of my bedroom. Never had a problem in the past. After some small repairs, it looks to be doing well.
3.6/5
EASY ASSEMBLY: Extremely simple and easy assembly will get your TV set up in no time!
EASY 360 ROTATION: Eliminates the need to wall mount a TV to achieve swivel function. Keep your existing TV stand without drilling holes on your wall.
PERFECT FOR DVD STORAGE: Fit your DVD or Bluray player in the compartment under the TV for organization and a clean look. Also ideal for storing games.
STABLE AND SECURE: Measuring 18.1 x 15.3 x 6.7 inches, it is suitable for even larger TVs. Includes non-slip, non-scratch rubber traction pads that keep TVs steady during rotation.
TV SWIVEL BASE: Enjoy the perfect TV viewing angle no matter where you sit with the effortless 360 degree spin feature.
$234
Excellent performance, but won't remain turned To keep it in place, we bought a rubber door stop, and that solved the issue.
3.2/5
$234
We first had a small antenna with few channels, and the majority of those channels either had no signal or no operational channels. I then discovered this antenna. I barely needed five minutes to install the antenna because I didn't know which component went with which. The only challenging component is locating the antenna in the ideal location so that you may view a variety of channels. I positioned my behind my TV and gained 33 additional channels, the majority of which were operational. I even received channels that I had never received with my previous antenna. I would advise people to use this antenna. There are a lot of excellent channels available.
COPYRIGHT © 2019
