4.5/5
Fits most of round 5-3/4" LED Headlight, eg: Harley Davidson speed triple, street triple (round headlight model), rocket iii 3 roadster,thunderbird;harley davidson dyna,low rider,wide glide,sportster,super glide,super low,roadster,nightster,night train,night rob special,sreet bob,forty eight,iron 883,seventy two,cvo breakout,cvo softail convertible,blackline,cross bones,XR1200X,rockersoftail,springer,street 500,street 750,victory octane,indian scout,triumph,Honda shadow VT750DC...
Valid irradiation distance is much more longer than normal bulb,plug n' play,easy installation with manual. Connector: H4 (NOTICE: 2014+ Harley Davidson Touring and Trike models needs the adapter:ASIN B018HSCD1K)
DOT,SAE,E-Mark approved, legal on the road, waterproof ip65, shockproof, dustproof
NOTE: Add the bucket ASIN: B0751BXX9B if it doesn't fit into your bucket; Forty Eight XL1200X (2010-later) and Dyna models(06-later,except FXDL,FXDLS and FXDWG); FXDF models require separate purchase of mounting block(P/N 67741-06); The following models require vibration damper(P/N 67700059).
Super bright light pattern over standard incandescent lamps,cut through the night. Voltage:DC 12-30V,6000K color temperature
$234
WOW, WOW, and WOW! On my 2003 Harley Dyna, which has 140k miles on it, I've tried a ridiculous number of different daystar, sivlerstar, and halogen bulbs. I never bought HD LED headlights because they were three to four times as expensive as this. This headlight matched my 5 3/4-inch headlight housing perfectly. Literally, it was ride, tighten bezel, detach old light, and attach new light. EXTREMELY simple, perfect replacement. This headlight is SO BRILLIANT! OUTSTANDINGLY brilliant The high beam casts a vertical wall of light far down the road, although the contrast between the low and high beams is not adequately depicted in the picture. I'd estimate it to be 3 times as far away as a similar-wattage halogen bulb. The DAYMAKER headlamp is one of the rare products that has a name that is entirely suitable. It was really simple and quick to position the headlight precisely where I needed it for maximum throw because of the vertical oval of light that is thrown in the high beam. I wish I could have TWO of these things if I had a dual headlamp setup! I have not recently been this pleased with a purchase. This LED outperforms every other bulb I've tried, including Sylvania Silverstar and Phillips Xtreme Vision. Just keep in mind that the pictures do NOT do the amount of light that this headlight produces justice at all when you look at them. GET THIS LIGHT RIGHT AWAY!
4.4/5
Super bright with high visibility safety lights, big difference between Low and High brightness, EASY TO INSTALL
Use Ultrasonic Welding Technology to achieve IP68 Waterproof, it will prevent from any bad weather and diving with a Longer life span.
Any other problem please feel free to contact us, we are always here to satisfy of you.
(Set of 2 pack) High Brightness Diodes LED Combination with better heat distribution, designed for 12v system. Functions as Stop Tail Rear/ Side reflector Side Marker and License Illuminator (on left).
Application: Universal for trucks, trailers under 80", tractors, semi-trailer, dump Truck, bus, boat, special vehicle,etc.
$234
These are a nice improvement above the LED replacements that the major car parts retailers offer. The plastic mounting brackets of the old type inevitably crack from use and abuse. These have a considerably more effective mounting method.I did need to drill a hole in my trailer's aluminum mount bracket to fit these cables' pass-through construction. However, it is a performance boost and will result in a longer-lasting setup.LED is now a relatively standard requirement, of course. So avoid buying a model that still relies on bulbs. If you neglect to unplug the trailer wiring before you launch the boat, LED is genuinely submersible and won't blow the bulb. Presumably, these are efficient on various trailer designs.These are for trailers that aren't wider than 88" (USA). If wider, you must purchase the other style of lighting.Installing requires caution. There are lights to the left and right. White light that is directed downward from the left lamp illuminates the license plate.I rate these five stars overall. Boom! What else do you require of me?
4.4/5
EASY TO INSTALL: 2 Wires Connection: Black is Negative and Red is Positive.Note:you need to connect it to the relay then it could blink!
Partsam (2 x Amber) 6LED, 6-5050-SMD 4" motorcycle led turn signal strip with 120CM extension wire, 12V.
Size: 100mm x 10mm x 4mm (4'' x 0.4'' x 0.15''); Wire Length: 1200mm (47 inches).
Light up an amber ( orange ) color similar to most motorcycle bikes stock signals; Front and rear signals on any size and style of 12V motorcycles Vehicles.
Flexible Turn Signal Strips Indicator Blinker Light Universal for motorcycles and scooters; Lot of Common uses. Motorcycle License Plate Blinker Light, Car License Plate Light, Trailer lights.
$234
On my 2004 Yamaha R6, I purchased these to swap out the LED strips that served as the rear turn signals. The bike's former owner used LED strips similar to these for the turn signals when he installed a fender eliminator kit on it. The issue is that he chose red, which drowns out the red of the turn signals when the brake is used, making it impossible to tell that it is even on.These operate flawlessly! Since they are amber in color, you can see them even when the brake light is on, and they are sufficiently bright to be seen at any time of day or night. They haven't even begun to unstick from my fairings yet, and I honestly don't see it happening very soon.I'd say these are ideal for use as turn signals on the back of a motorcycle.
4.2/5
3 Wire Output: Running Light, Brake Light And Ground
No Cutting Required, True Plug and Play
Can Run 2 Harnesses per Vehicle
Fits 2015, 2016, 2017, and 2018 Polaris RZR 900/1000, XP 1000, XP Turbo
1 Minute Install
$234
I wanted to make sure I gave this product a review because I think the negative reviews aren't giving it enough credit. I own an XP-4 1000 from 2016. The back main plug on the driver's side is where Polaris divides the harness into right and left, so I first plugged it in there. It is true that the new connector only has three pins, as several of the other reviewers who left unfavorable comments pointed out. Sadly, they gave up just as quickly as I did at initially. Thankfully, a couple other people who evaluated this item informed us of the proper place, which is where the harness connects to the tail light. Since they have three pins, you may install two of them, one at each tail light. When I finished, the plug functioned flawlessly. Additionally, it is simpler to conceal the wires in this area. I am overjoyed because this is the ideal product for this use. I strongly advise.
4.1/5
Voltage: DC 12V; Waterproof Rate: IP 65; Easy Installation: Mount with 3M tape, 5 wires connection
Size: 20.5*1.3*0.8 cm / 8*0.5*0.3"; Power Cable Length: Approx 60cm
Material: Soft rubber strip with 3528 SMD LED; Fitting Position: License Plate Light
Led light color: Red for brake and stop, Amber for turn signal
Perfect turn Signal Brake light and Running tail Light all-in-one for motorcycle, Car, Trailer. Lots of Common uses
$234
Dear All,Because my 2016 HD Iron 883 only has the two bullet lights, I decided to buy this light because I didn't feel all that secure about people being able to see me at all times of the day or night. Therefore, I initially purchased a taillight that was intended to be flush and "fit" the Harley sportsters underneath the fender. If you were searching the sportster taillights like I did when you were reading this article, you've probably already seen what I'm referring to. THE BIG LIGHT I INCLUDED BELOW IS NOT FOR SALE.Motorcycle Harley Davidson Smoke LED Stop Brake, Rear Tail Light, and Stop Running Light (Smoke Lens)***However, the one I purchased was really thick! It protruded from the bottom of the fender by nearly an inch. Then, when my girlfriend and I increased our speed while riding my motorcycle, we encountered a speed bump. At that point, the suspension sank so low that the wheel literally destroyed it. Seriously, why would they create a light that sticks out so low that the tire is literally only an inch from from it?Therefore, I found this lamp to replace the shoddy one that broke. I was looking for something that was either well away from the tire or had a significant amount of clearance. This lamp is adaptable, brilliant, and simple to wire. The wire diagram shown in the product photographs accurately depicts the actual setup. Simple to understand. Since I rely on my bullet taillights for turn signals and had originally connected it as a brakelight with a flashing module, I did not use the turn signals. What I employed is listed in the product link below:Brake light flasher module for vehicles. Flashing Safety Light Alert. For both cars and motorcycles, universal.*** THIS IS THE THING For some reason, the initial light they provided me had four burned-out LEDs. The working lights did flash when the brakes were used, as you can see in three of the photographs I supplied. The 4 right LEDs, however, weren't working.I got in touch with the vendor, and they quickly provided me a replacement! The new light arrived swiftly, and it works flawlessly thanks to the fantastic seller!So please accept my gratitude for the seller's first-rate customer support! This light has my highest recommendation! I'm excited to ride my child in the security of knowing that people can see me plainly day or night. I took pictures of it both on and off so you could see just how bright they are even during the day.
3.9/5
Functions All in one: This Harley taillights can be used as running light, brake light, turn signal light(turn left/right). White Light used as license plate light; The brake light and turn signals light built together. Providing good visibility, it makes your driving much safer.
MOVOTOR Smoked Harley Davidson Led running/brake integrated turn signal lights, upgrade your stock tail light. Lay Down Style, which is angled to follow the curve of your rear fender for the streamline look.
Package: 1 Piece Harley Smoked Led Tail Light +1 piece Gasket, come with the gasket to prevent water infiltration. Warranty:12 months quality warranty make sure you get risk-free tail light.Â
Specifications:Voltage: 12V DC; LED Quantity: 60LEDs; Lifespan: above 30000 hours; Wire for functions: Running--White Wire, Brake--Red Wire and Turn Signal: Yellow wire-- right turning; Blue wire-- left turning; Black wire--Negative.
Fitment: Fits for Harley Sportster 883, Sportster 1200, Dyna, Tour Glides, Road Glides, Road Kings, All 1991-2010 FLST Models (except 1991-2000 FLSTF, 2005-2010 FLSTN, 1997-2003 FLSTS, 2005-2007 FLSTSC, 2010 FLSTSE);All 2002-2010 FXST Models (except 2002-2007 FXSTD, 2007-2009 FXSTSSE, 2008-2010 FXCW/C);1991-2010 Electra Glides (except 2005 FLHTCSE, 2009 FLHT Standard).
$234
**UPDATE** 10/29 - It was installed at last. I utilized the HD harness and put the wires right into it because I didn't cut any wires.REALLY good; works If you dislike the very lengthy brake light or want to do without the turn signals, this is undoubtedly a wonderful upgrade.There is a LOT of light. Compared to the stock HD light, I'm impressed. It is also much shorter. The integrated turn signals are very good and have no impact on the fronts. Please watch my video.The instructions are quite straightforward; it took me a little trial and error to figure out which wires went where, but after I did, I discovered that my handbook had a useful feature for identifying which wire is which. I provided the wires I used on my 2008 Sportster in addition to the wiring diagram.wonderful small light installing two screws and five cables. superb craftsmanship It is quite bright, according to a brightness check. Should perform admirably. Since I don't have a license plate above my tail, I snipped the leads to the LEDs that were not originally pointed up. Very thin, only half as thick as a standard light.
3.8/5
Quick and easy installation
Stylish splash-proof enclosure
Ample wire length to accommodate any stock or custom application (38" / 96.5 cm)
Reusable easy to connect Posi-Tap connectors require no special tool to connect or disconnect
4 super bright surface LEDs
$234
contains 4 LEDs. really luminous With adhesive covering the top and sides and attaching to the back of the plate, this is essentially universal.Easy to install. I spent two hours swapping out four things at once, despite the fact that I have no mechanical training. I would anticipate that everything would take an hour if you were only doing the plate light. The tap connectors they provide are excellent because no wires need to be cut or stripped.Even an excellent install video is available from the manufacturer. Although it's against Amazon policy, I'd provide the link. installation of TST stealth lighting on YouTube.The only drawback I can think of is that it doesn't fit well with a plate cover. I still use paper temp plates and a plate cover to support the paper.Overall, if you're looking for a plate light, I would definitely suggest this. very content.
3.7/5
Fitment: Lots of Common uses. For example Motorcycle License Plate Blinkers Lights, Car License Plate Lights, Trailer lights etc.
This listing features for ( 2 ) 6 LED Flexible Turn Signal Strips Indicator Blinker Light.
Led Qty: 6LED; Length: 12CM (4.5") , with 120CM extension wire; Color: Red; Voltage: 12V.
With the stick-on tapes on backside of the strips, you can mount it anywhere.
It can be used as front and rear signals on any size and style of 12V motorcycles Vehicles.
$234
These LED strips look great! They were fastened to the passenger peg mounts' backside. They performed flawlessly.They were connected into my brake system, and when combined with the tail light, they function flawlessly. They significantly increase rider visibility. When you have more running and brake lights than just the one factory tail light, cars are considerably more likely to see you.
3.4/5
Premium ABS plastic lens and aluminum License Plate bracket LED built to long lasting durability,even over 50,000 hours using lifespan.
Motorcycle LED Tail Brake Light with Turn Signals. 12V, 16 LED Double Rear Motorbike Light Unit, Black body with smoked lens. Mounting plate fits behind number plate.
Universally fits for most motorcycle, street bike, standard bike, naked bike, dirt bike ATVs, off-road vehicles, Custom Chopper, Cruiser, Dirt Bike, Buggy, Cafe racer, ETC.
Can protect any splashing rainy water penetrating into the light ,can use it confidently without causing any issues.
Wire Setup: Ground: black wire Running Light: green wire Brake Light: red wire left Turn signal Light: white wire right Turn signal Light: yellow wire.
$234
I adore it. I got two of them even though I only needed one based on the ratings on Amazon. This is an alternative because they are affordable enough. At least initially, the first one I opened functions properly. It appears to be gorgeous! The smoke tint and clear LEDs look great with my white motorcycle with black trim. That appears cool as well when the LEDs are lit up in the appropriate color. The taillight, brake light, white lights for the license plate, and amber turn signals are all contained in a small container. For a dirt bike, the lighting is seriously awesome!This well presented package is NOT sealed anywhere, as was already said. Since everything is LED, very little electricity is used, but you will need to utilize a flasher designed for LED systems. Bring your own sealant.To those who are capable of designing and creating their own wiring, I highly recommend this taillight. Given their low price, I would buy two—one for use and the other for replacement parts. Do not purchase this expecting a fully functional solution.
3.3/5
The Motorcycle Tail Light Working Voltage: DC 12V.Wattage:1.44W(8 LED,0.18W/LED). Light Color: Red. Lens Color: Red/Smoked black/transparent. Materiel: ABS Housing + PC Lens.
Standard Fender Edge LED tail light for Harley Davidson,used for running light,brake stop light,rear tail light, license plate light,turn signal light
Curved design provides perfect match to the chopped rear fender
Motorcycle Tail Light Fitment:For Harley Davidson 2004-2014 Sportster 883,Sportster 1200
Led Motorcycle Brake Light 5 Wires Connection System: GND (Black wire);Braking(Red wire); Running(Yellow wire); Turn Signal(Blue wire&Orange wire)
$234
Fit perfectly on the 2001 Shadow 750 Spirit. Since it is a universal light setup, I didn't anticipate needing to adjust it in any way to attach it. It had enough area to drill new holes and put on the rear subframe of the fender for a decent fit, but I decided against using the 3m tape that was provided to mount it because I wouldn't trust it. Signals are present, and it appears to be fairly bright. If you want to give a bike a tidy appearance and you're mechanically inclined, this will work for you and it's reasonably priced.
COPYRIGHT © 2019