Yes, you can put a 16 inch bar on a 14 inch chainsaw, but it is not recommended. The chainsaw will be less stable and more difficult to control. It is also more likely to kickback.
No, you cannot put any bar on a chain saw. The bar is what the chain runs around and needs to be matched to the saw.
A 12-inch chainsaw can cut a tree that is up to 24 inches in diameter.
A 20 inch chainsaw is big enough to cut through a tree with a diameter of up to 20 inches.
5/5
For use on CS-4900 also compatible with older ECHO models: CS-450, CS-510 and CS-530
Please note: Consult owner's manual for proper part number identification and proper installation
REplaces old part numbers 18F0AD3372 and 18A0AD3372
0.050" gauge and .325" pitch
Genuine OEM Echo part
$234
Sorry for the delayed response; the bar was/is for one of my workers, and I was out of town when it was delivered.1) The pricing was reasonable, and the estimated delivery date fit our needs, and 2) The delivery arrived a day earlier than expected!3) The chainsaw bar has worked effectively.We appreciate you being and doing as you portray your company to be!
4.7/5
Bar and chain combination
14-Inch chainsaw bar and chain combination made by the world’s leading saw chain manufacturer. Pitch: 3/8" low profile, Gauge: .050", chain drive link count: 50
For saw sizes up to 42 cc
Saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provisions of ANSI B175.1-2012. Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3
Fits several Stihl chainsaw models including MS170
Lubritec keeps your chain and guide bar oiled for less friction and longer life
Features smooth cutting, low kickback and longer bar life
$234
Great results. ran two fuel tanks through the saw with no issues with the bar or chain. Never did the chain jump off the bar. After the first tank of petrol, I did need to slightly tighten the chain, but that is to be expected. An excellent bar and chain replacement. I wanted an extra bar and chain, which is why I decided to buy the combo. I maintain hiking trails, so if my saw gets stuck in a tree, I can remove the bar and chain and install the other to free it. To keep this spair, I removed the old bar and very worn chain.
4.6/5
N/A
Fits: 55Rancher, 257, 261, 262XP, 357XP, 359, 455Rancher and 460
.050-Inch Gauge
Ideal for professional users in demanding conditions
High-performance, low vibration chain
Imported
3/8-Inch Pitch
$234
My Husqvarna 460 Rancher's extension is this bar. Currently, a 24 inch bar is attached to the saw. Bars must be modified according to the task at hand. This means that the longer one does not always fit, and vice versa.The bar itself is manufactured with heavy-duty materials and is therefore quite durable. It is compatible with the 3.7 HP engine in my saw and should last for some time. This bar is difficult to compare to a consumer one.I purchased chains from Husqvarna to go with that bar (H80), which was a wise choice.excellent barFits the following Husqvarna chainsaws: 55 Rancher, 455 Rancher, 257, 261, 262 XP, 357 XP, 359, 460, 460 Rancher (per the packaging, April 2015).72 3/8 pitch, 0.050 gauge drive links. Consult the Husqvarna website before choosing a bar. The bar, chain, and sprocket need to line up. However, depending on the task, you can still choose a different tooth shape:Minimal-profile: Slower cutting speed, lower kickback chains, and low vibration. There are long gaps between sharpenings.Semi-chisel: Still has a low kickback, cuts more quickly, and is dirt-sensitive.Chisel: Quick, aggressive cutting, risky kickback, and sensitive to dirt (sometimes called clean cuts). Run these chains only if you have previous chainsaw experience. When you wish to give it a try, make the first cuts on already-cut wood while using an advisor. Please be careful.General: When cutting various types of wood, there is no general saw. As a result, I chose a 60 cm and a 38 cm little saw. I have several bar lengths at home for both. This enables me to be adaptable and adapt my saw to the task at hand.
4.5/5
Replaces chain saw bars and chains
Use with listed models
High quality construction
$234
So, last year, I replaced my six-year-old bar and cut endless cords of wood to feed an outdoor wood boiler. The replacement, according to the Oregon website, is bar and chain number 105706. But I didn't like it because the chain kept slipping and the bar oil didn't seem to be getting to it sufficiently. So I put the old one back on with the intention of replacing it this year with a new sthil bar. As usual, it's difficult to purchase any STHIL items because their website doesn't list prices and is unable to let me know whether my local store has any in stock. I suppose I could have called, but I estimated that we would need to talk for an hour to convey what I wanted. To purchase, go back to Amazon. I saw that another reviewer claimed to have an 8-sprocket farm boss from the same year as mine and claimed that this one functions. Which is understandable given that I've been using Oregon l74 chains on my original bar. Well, here is the right bar and chain after much trimming. Why the Oregon website claims it is a separate one is beyond me. Perhaps Sthil had various iterations of the farm boss. Or if I mishandled the situation, lol. In any case, this one works flawlessly, and I'm happy that I finally have a new bar!
4.4/5
16-Inch chainsaw chain and guide bar made by the world’s leading saw chain manufacturer. Pitch: 3/8 in. low profile, gauge: 0.050 in., chain drive link count: 55
Keep your bar and chain oiled with the built-in LubriTec oiling system for less friction and longer life
Guide bar is lightweight and is easy to maneuver because of its slim symmetrical contour
Chain is durable and easy to maintain, with a forgiving cutting performance
Fits certain Stihl chainsaw models including MS170, MS180C, 021 and MS211
$234
I own numerous chainsaws and burn firewood for heat. I have two Stihl 021 saws that are smaller. I usually use chains from the Stihl brand, but I decided to try this Oregon bar and chain set.So far, I'm pretty impressed. The bar and the 021 saw were a perfect fit. The Oregon bar is not nearly as tall down by the sprocket, as you can see in the images. The chain cut quickly and maintained its sharpness for a very long time. It was a screamer out of the box; we'll see how it holds up after being sharpened a few times. I think I would probably buy the chain again based on what I've seen so far.I'll tell you what to avoid purchasing: products under the Home Depot "Power Care" brand. Wow, that was the worst chain I've ever seen! After about 8 cuts on oak with a 15" diameter, it was dull.If you're considering this for your saw, hopefully this will be helpful.
4.2/5
.050-Inch Gauge
Ideal for professional users in demanding conditions
3/8-Inch Pitch
Specifically designed to increase the saw's capacity and effectively reduce vibration
For Models 325P4, 326P4, 326P5X, 334T, 335XPT and 338XPT. Original replacement bar - specifically designed for Husqvarna chain saws
$234
These bars are the OEM standard and a decent option for the majority of users that want this size. These were bought in bulk for my 338 arborist saw. For working in the trees and limbing fallen trees, the 16" length is perfect. If it is kept well-oiled, clear of the dirt, and not pinched when felling a tree or large branches, you can anticipate good performance and a long lifespan. The paint is too easily scratched, earning it only four stars. If trees or branches grip onto the bar while it is cutting logs, expect the paint to become tarnished and the bar to start looking unsightly. If the chain is worn out and receiving insufficient oil, it will burn and discolor. To increase the bar's lifespan, use it upside-down and true it with a file.
4.1/5
Fits Stihl Model # 024, 026, 028, 029, 030, 031, 032, 034, and 036
Lubritec system keeps your chain and guide bar oiled for less friction and longer life
Bar Length: 20†, Pitch of drive sprocket: .325 , Motor Mount: D025 , Gauge: .063
Meets ANSI standards for low kick back performance
Pitch: .325", Gauge: .063", chain drive link count: 81
For saw sizes up to 62 cc
Saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provision s of ANSI B175.1-2012. Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3
Fits several models, including but not limited to the following: Stihl 024, 026, 026P, 028, 029, 030, 031, 032, 034, 036, MS 260, MS 270, MS 271, MS 280, MS 290.
$234
AMAZON ratings I haveexactly what was promised. really sharp, excellent. decent pricingPros: product matches description photo matches display high-qualityCons: Null— My rating:5 Stars: I would buy this product again or suggest it to a friend because it performs precisely as promised and is an excellent value for the money.4 Stars:Works exactly as promised, fit and finish are what you'd anticipate from this kind of product, although there may be a small fault.3 Stars: It mostly functions, but it might not be a great deal for the money or you might want to see some modifications or upgrades.Barely functional yet usable if you try; two stars.1 Star: This item is useless, completely ineffective, and a complete financial waste. It should be returned.Based on the aforementioned standards, I am evaluating this as five stars overall.(Actual product image)Please let me know if this review was useful. Thanks:-)
If you're looking for the right bar for your chainsaw, the first thing you need to do is measure the length of your saw's guide bar. The guide bar is the metal bar that the chain runs along. Once you know the guide bar's length, you can match it up with the correct size bar. The next thing you need to consider is the pitch of the chain. The pitch is the distance between the rivets that connect the links of the chain. The most common pitches are .325 and .404. You'll need to know the pitch so you
A chainsaw chain can be sharpened around 20-25 times before it needs to be replaced.
You should replace your chainsaw bar when it starts to show signs of wear and tear. If you use your chainsaw regularly, then you should replace the bar every few years.
A chainsaw blade should be sharpened after every 5-10 hours of use, or as needed.
The chain on a chainsaw needs to be tight in order to work properly. If the chain is too loose, it can come off the saw and cause serious injury. If the chain is too tight, it can cause the saw to bind and be difficult to use. The ideal tension for a chainsaw chain is when the chain can be pulled around the bar with moderate force, but not so loose that it can come off easily.
COPYRIGHT © 2019
