An electric pole saw is a great tool to have if you need to trim branches that are out of reach. They are lightweight and easy to use, and can save you a lot of time and effort. They are also relatively inexpensive, so they are definitely worth considering if you need to trim branches on a regular basis.
Yes, a pole saw can cut down a tree if the tree is small enough. The pole saw can cut through the tree trunk, branches, and leaves. The pole saw is a powerful tool that can make quick work of a tree.
Pole saws and chainsaws are both useful tools for cutting through branches and logs. However, they are designed for different purposes and have different strengths and weaknesses. Chainsaws are typically more powerful than pole saws and can handle larger and tougher cuts. They are also usually more expensive and require more maintenance. Pole saws are lighter and more maneuverable, making them better for smaller cuts and for reaching high branches. They are also typically easier to operate than chainsaws.
A pole saw is a great tool for trimming bushes. It can reach high branches and get into tight spaces.
4.6/5
2 tools in 1: pole chainsaw or chainsaw
Telescoping pole extends to 8. 8 ft.
10-inch Sun Joe cutting bar and chain with automatic lubrication
Powerful 8-amp motor cuts branches up to 9. 5-Inches thick
Ideal for cutting overhanging limbs and thin logs
$234
The Sun Joe SWJ807E has performed admirably. Although it is plainly not intended for heavy duty use, it has been very effective for trimming tree limbs. Without ever bogging down, it has sliced through everything I've used it on, even branches that are probably up to 4-6 inches in diameter. I appreciate that this may be used without the extension, which makes it simpler to cut larger branches into smaller pieces once they have fallen to the ground.No chain bar oil leaks have been reported by me, unlike with other manufacturers, and a full tank of oil tends to last for a long time. When completely extended, it is undoubtedly hefty at the end and difficult to control, but that is to be anticipated. However, it is manageable as long as you don't extend the saw at an extreme angle.I have no reservations about advising anyone to use this saw to trim tree branches or perhaps to cut down small trees. The only caution I can think of would apply to any chainsaw, and that is to be cautious not to allow the limb to "pinch" the chain or bar because, when extended, it would be challenging to get it free, considering it would be challenging to reach branches to relieve the weight of the branch in order to free the saw.
4.5/5
AUTO-LUBRICATION: 8-inch cutting bar and chain with automatic lubrication. Oil tank capacity (fluid ounce): 2.7
TELESCOPING: Pole extends to 8.7 ft. to provide 15 ft. of overhead reach. No Load Speed (rpm) 6000
WE’VE GOT YOU COVERED!: Your new pole chainsaw is backed by the Snow Joe + Sun Joe Customer Promise. We will warrant new, powered products for two years from the date of purchase. NO QUESTIONS ASKED. Contact Snow Joe + Sun Joe customer support at 1-866-766-9563 for further assistance.
POWERFUL: 6.5-amp motor cuts branches up to 7.5-inches thick
EXTENDS REACH: Ideal for cutting overhanging limbs and thin logs
$234
It was my very first experience using a chain saw. Yes, I had never used a chainsaw. Here are some first-time user observations I have:1. The necessary oil is not included with this pole chain saw. When purchasing a chainsaw, acquire a quart as well.2. As stated in the directions, be sure to wear sturdy gloves. Although it wouldn't harm, I'd say you can get by without them if you are careful. Smoke 'em if ye got 'em, though. At the very least, I would have a medium-duty 50-foot outdoor extension cord on hand.4. Even though the instructions emphasize multiple times that you must install the chain going in the correct direction, it would be pretty difficult to get that wrong since the chain comes with the guide bar already wrapped around it in the proper direction. Assembly took less than 30 minutes despite the fact that I had no prior experience with chain saws. This shouldn't be a problem unless you disconnect the chain from the guide bar before assembling.6. Be careful not to overtighten the tension screw when attaching the chain/guide bar to the motor and sprocket. Once the chain is attached, the sprocket cover is removed, and the tension is set, the chain should be just a bit snug but not impossible to move back and forth by hand. You may alternatively use a thick towel or something else instead of a glove, as this may be the one occasion when you would actually need one. 7. You don't need a lot of oil, so take care not to overfill the container. The oil reservoir quickly fills up 8. I discovered that while using the chain saw, oil was escaping from the cap, according to some owners. I've never had to deal with this issue9. The chainsaw performed admirably. I was slicing through limbs that ranged in thickness from roughly 12" to 3". It cut through all of these with comparatively little effort.10. It is not an especially loud chain saw.11. I would advise both novice and seasoned users to utilize this pole chain saw.
4.5/5
3-piece aluminum shaft can be extended to 8 ft. for the perfect extended
Easy adjust chain tensioning system for quick tightening of the chain
G-MAX 40V Li-Ion Battery System powers multiple tools for complete yard system--includes 2Ah Battery and Charger
Automatic oiler applies oil to bar and chain when needed to ensure durability and optimal use with a translucent oil tank for clear view of oil level
8-Inch bar and chain for easy trimming of branches. Product weight: 8.360 pounds
$234
Although I've only had it for three weeks, I've used it virtually every day. 32 acres of former farmland that have turned into a horrible type of nature are what I'm attempting to reclaim. Mostly false willow and second-growth cedar, with a few fine trees lost in the confusion. Although considerably speedier, bulldozing would only provide me a parking lot. I must proceed through the trees and bushes one at a time.I made the decision to try something with batteries after performing the customary spring dance of trying to revive my gas-powered gadgets. If I need a big chain saw, I'll never go back to gas. Both the chainsaw and this polesaw last longer than I do. With this polesaw, I can cut down all the false willow and cedar that is up to 6' high. I employ its reach to access the cedar without having to enter it, employing it as a propelled scythe.The fact that this product is nicely balanced and simple to use is something I like. instantaneously starts and stops. You can use it in sawed-off shotgun mode or with the extension segment that is supplied. can be disassembled in the field without any tools and put back together faster than the fire ants and scorpions will locate me. economical with chain oil, simple to check oil levels, and simple, clean replenishing. I'll let you all know if this holds up for a few years with this kind of use. Nothing beats a saw you can pick up and use right away right now. It is really suggested and very simple to clean and wipe down after usage. Place the battery on a charger, take a break, and repeat the process tomorrow.
4.5/5
2-TOOLS-IN-1: pole chainsaw or chainsaw
EXTENDS REACH: Ideal for cutting overhanging limbs and thin logs
AUTO-LUBRICATION: 8-inch cutting bar and chain with automatic lubrication
TELESCOPING: Pole extends to 8.6 ft
WE’VE GOT YOU COVERED!: Your new convertible pole chainsaw is backed by the Snow Joe + Sun Joe Customer Promise. We will warrant new, powered products for two years from the date of purchase. NO QUESTIONS ASKED. Contact Snow Joe + Sun Joe customer support at 1-866-766-9563 for further assistance.
POWERFUL: 8.0-amp motor cuts branches up to 7.5-Inches thick
$234
I got this on the third of last week.On SAT, I opened the box and completed the quick assembly needed to have it ready for usage.Sadly, I didn't have any of the BAR AND CHAIN OIL needed to operate the saw properly.I was able to use the saw to cut some ROOTS in the standard configuration and some SMALL LIMBS in the pole configuration thanks to a neighbor who lent me some oil.I recently bought a sizable bottle of BAR AND CHAIN OIL, and I was prepared to proceed until I read an article regarding the influence of this kind of oil on the environment (because it pretty much has to enter the environment). It appears that this kind of lubricant is produced from natural, environmentally friendly materials in many different nations. HMMMMMMMMMMMMMMMMMMMMMMM.If there had been enough BAR AND CHAIN OIL provided to fill the reservoir for the first usage, I would have rated this saw five stars.
4.4/5
CSA approved; Full 2-year warranty
Ideal for cutting overhanging limbs and thin logs
Powerful 6.5-amp motor cuts branches up to 7.5-Inch thick
Telescoping pole extends to 9.4 ft providing up to 15 ft of overhead reach
Multi-position head cuts at 0, 15 and 30 angles
$234
I don't often write reviews, but I felt that this product merited one, and I also have a suggestion that might help you save time. First off, this business is rocking it! Despite being cheap, the product is incredibly well made and constructed. The major components have clear labels and are easy to understand. Even their signup page is user-friendly and well-designed. In order to make it simple to find without having to leave your computer when registering and look for it someplace on the device, they include a bright yellow card with the model number and S/N.Simply for the obvious thought that went into the product and packaging, they deserve five stars.The 27-month warranty made me feel more secure about purchasing a product, even though I was aware that, based on suggested and actual retail prices, it had to have been made at a low cost.The latch that is designed to retain your extension cord in the handle so it doesn't continuously disconnecting was the one item that let me down. The typical orange extension chord is a little bit too big for it.The other letdown, AND MY TIP, is that even though the instructions are pretty clear and simple to follow, they have a quick video on YOUTUBE that, had I watched it before attempting to put the chain on, would have spared me an hour or so of struggling to get the tension just right so it wouldn't fall off. You may find the video on YOUTUBE by simply typing in the model number.https://youtu.be/rPBQcQdOdWkSun If there had been a bright card in the box with that information, Joe—if you're reading this—I would have wanted to give you six stars!used it on the first day for a number of hours. I discovered that the bar and chain oil doesn't need to be replaced as frequently as some people had said, but you should still keep an eye on it. There is a plastic reservoir window so you can always see how much is left, unlike more expensive machines. Bravo!
4.4/5
10-inch Oregon cutting bar and chain with automatic lubrication
Multi-angle head adjusts from 0° to 30°. Chain pitch: 3/8 inch
Powerful 8-amp motor cuts branches up to 9.5-inches thick
Telescoping pole extends to 7.2 ft providing up to 14 ft of overhead reach
Ideal for cutting overhanging limbs and thin logs
$234
As of now, so nice! Last Sunday, I used it for a number of hours, and I must say that it is a pleasant addition to the yard management toolkit. Previously, I used a manual pole saw/rope lopper for taller, difficult-to-reach cuts and a reciprocating saw (like a Sawzall) with a wood blade for bigger cuts. This handles thicker cuts of 6 to 8 inches much more quickly than a reciprocating saw, and it also has the benefit of increased reach. The pole's length modifications were easy because to the sturdy and straightforward cam that was used.It would be a real bummer to be in the middle of a project and have to stop as a lack of oil can ruin the saw, so go ahead and purchase some additional chainsaw oil (bar and chain oil) right away. Fortunately, I had finished my job, but it would be a real bummer to be in the middle of a project and have to stop.Make sure there isn't too much chain slack if the saw starts to clatter (a simple screw turn will repair it), and take breaks to regularly clear up the saw dust that can accumulate near the gear head as it kicks back and mixes with the oil.As I "log" more hours using the tool, I'll attempt to update this review.
4.4/5
(1) 2Ah battery and charger included (Model 29462)
8 inch pole saw for easy trimming of branches. Pole Saw Weight (without battery)-8.38 pounds. Pole Hedge Trimmer Weight (without battery)- 9.57 pounds
20-Inch steel dual action blade for optimal performance and durability
Automatic oiler applies oil to bar and chain when needed to ensure durability and optimal use with a translucent oil tank for clear view of oil level
G-max 40V li-ion battery system powers multiple tools for complete yard system--includes 2Ah battery and charger
$234
I've never been happier. The chain saw attachment and hedge trimmer are both equally as effective as my gas-powered tools, and the battery lasts much longer than I anticipated. Even though I've used the pruner to clear my yard (as well as my neighbor's) of many tiny trees and tree limbs and the trimmer to cut extremely huge hedges, I've never used more than 50% of the battery. After that, it takes less than an hour for the battery to fully recharge. The chain saw pruner is much sharper and more powerful than I had anticipated, and the first few tree branches I undercut shocked me by being cut almost completely through and pinching the saw. The tools are also much lighter than my gas-powered tools, which is great for my 77-year-old arms and shoulders.
4.4/5
Extended Reach - up to 14 foot reach with extension pole
Branch hook - To help remove cut branches
Soft grip on pole extension - maximum maneuverability
3 Year Limited Warranty, refer to "Warranty & Support" section below for full details
Angled head and blade - for cutting precision
High capacity 4. 0Ah Battery pack - for extended runtime
Replacement parts available: chain Cmzcsc8, Bar Cmzcsb8
Includes battery and charger
$234
Polesaws are something I own and frequently use. Since pruning trees is a constant problem where we live in Florida, I've tried several different brands over the years, from Oregon to B
4.3/5
Compact and light weight design ; Rated Voltage:120V to 60Hz.Chain Speed:8.5 m/s
8 foot extension pole with tool less installation
Patented auto tension chain system for extended bar & chain life
Powerful 8 Amp motor offers a consistent performance. OIL TANK CAPACITY 120 ml
Rotatable working handle for easy pruning. Chain Links: 40
$234
This device behaved FAR better than I had anticipated. When it first arrived, I put it together and filled the oil reservoir in about 5 minutes, after which I got to work. The towering branches of a mesquite tree, sometimes known as an ironwood, were first trimmed. I was able to use the entire 6 feet of my frame to cut branches that were about 12 or 13 feet from the ground with both poles attached and the pole closest to the chain saw completely extended. And not just slim branches either; this little jewel was capable of slicing through 5" diameter thick branches. As would be expected, lifting the saw at the end of the pole demands some upper body strength. Fortunately, the Marines gave me toughness in my 20s, and I've maintained my fitness ever since. Since the saw's weight alone is enough to enable the blade to cut through the branch, the cuts themselves were quick and simple.One piece of advice: As the saw approaches the branch's bottom and the branch's weight exceeds what the uncut wood can handle, the bottom of the branch will tend to rip as the branch falls before the saw has finished its cut. As a result, the tree develops a stump that is both unsightly and unhealthy. The easy fix is to make a cut that is about a foot away from the trunk from where you want the branch to eventually finish, then go back and trim the remaining foot. The second cut will leave a smooth, flawless termination because there won't be any branch weight to draw the stump down. This is considerably easier than you may imagine, since the saw cuts through even a thick branch in few seconds.Additionally, be careful of the saw's weight as it descends from the pole's end when the branch falls. Again, you'll need some upper body strength. But nothing a normal guy in decent shape couldn't handle.I removed at least 60 or 70 branches from various mesquite and palo verde trees before piling them all together. After arriving, I changed the pole saw into a chain saw, tightened the chain, and started cutting the materials into shorter lengths that could be loaded onto a trailer for disposal. The chain saw is small, quick, and strong. I have nothing negative to say about the work it did. In spite of the 100 degree temperatures in Arizona, I still found the labor enjoyable. So much so that I chose to remove a dying palo verde tree that was outside my fence entirely. The chain saw was even more fantastic for this task because it effortlessly cut through the numerous trunks. None of these trunks took longer than ten seconds to entirely cut through, even though several of them had diameters of around ten inches.The automated oiler performed brilliantly throughout, maintaining the blade's lubrication while dispensing only a small amount of oil (something that any chain saw will always do if properly lubed).The lesson here is to buy a corded chain saw right away if you're in the market. Click "Buy Now" alone. You won't be sorry!To be honest, I do have one drawback to mention. The automated chain tensioner did not function at all on the saw I was using. I don't understand how it could possibly tighten the chain after looking at it. This saw does not feature the kind of spring-loaded mechanism that would be necessary to mechanically expand the chain bar. Although it can stop the chain bar from retracting, it will inevitably become looser as the chain stretches. However, as I was manually tightening the chain every 10 or 15 cuts, I did not think this was a reason to take away a rating. Simple: Hold the (unplugged!) saw by the chain bar with the motor half hanging down and loosen the large orange knob holding the chain bar in place. With your free hand, tighten the orange knob once more once the saw's weight pulls the chain to the ideal tension. Probably takes ten seconds.
4.3/5
[DO IT ALL WITH ONE BATTERY] The battery that comes with this tool can be used on any of the 20V power or garden tools in the WORX Power Share platform
[AUTO-CHAIN TENSION] The automatic, tool-free chain tension system ensures you’ll always have the correct tension for the job at hand
[FAST, CLEAN CUTS] This cordless 20V Power Share chain saw is as fast and powerful as anything in its class. And with no gas, and no cord, there’s much less muss and fuss
[PLENTY OF JUICE] These are the same batteries we use on our JawSaw and in our lawnmowers and for our HydroShot power washer. They’re powerful enough for those tools, and powerful enough for a chainsaw
[12’ EXTRA REACH] It takes just a few minutes, and no tools to attach the pole. And with a reach of up to 12’, and at only 10 lbs. you’ll be able to get to branches and limbs before they become a problem
[AUTO-CHAIN LUBRICATION] The automatic chain lubrication system not only makes for smoother, more efficient cuts, but it extends the life of the tool. And the oil level indicator lets you know exactly where you stand
[COMPACT, LIGHTWEIGHT] The saw itself weighs only 6.2 lbs, about as much as a 2-Liter bottle of soda. You’ll work longer, with less strain on your hands, arms, back, and legs
$234
Benefits: Price was reasonable in comparison to other options. Battery-powered, cordless. Compared to other 8 footers, the pole is 10' long. and the final two telescopes; everything else is set. The battery is hooked to the pole's lower end, which slightly aids in balancing.Cons: The battery life is only 2.0 a-hour, which is not very long. If you want to spend a little more money, there are bigger batteries in this range. Even at only 2.0 a-hr, the battery still takes a very long time to charge.Other: It has a lengthy moment arm and a lot of weight at full extension, making it difficult to use. By grabbing in the middle and lifting to 90 degrees vertical, I was able to succeed. Lift the pole hand over hand till it reaches the branch's height. Lean the chain bar against the branch to rest. Back up to a relaxed angle, grasp the trigger, and pull the trigger. As the saw falls through the branch to a balance point and grabs in the middle of the pole, quickly lower the tool one hand at a time. To assist it balance, I also added a tiny 2.5-pound weight with a bungie line on the handle end. Although it increased the overall weight, the length was still rather manageable. A backup method to saw, chop, or pry the tool out in case it ever gets pinched is advised.Design modification? Allow for the removal of the left-hand guard and handle to reduce weight on the tool end when the pole is fastened. If it's not on the pole, then of course that is a safety concern. Therefore, add a switch to the handle and guard removal process to prevent the saw from operating when the battery is not plugged in at the tool's handle end rather than the pole's far end. Of course, that raises the price, and I did purchase this one due to financial considerations.The drill and reciprocating saw from another brand of tools I own have wonderful batteries, so I would have preferred those, but their pole saw was only 8' long and much more expensive. So it worked out okay, but I couldn't use it for very long, and I couldn't use it again for a while (to recharge), on the first day of use.
A Stihl pole saw extends up to 16 feet, making it ideal for reaching high branches. It has a lightweight design and a durable construction that make it easy to use.
An ego pole saw is a versatile tool that can be used for a variety of tasks around the home, garden or workplace. It is a long, thin pole with a saw blade at one end, and a handle at the other. The blade is usually made of carbon steel or stainless steel, and is sharpened on both sides. The saw can be used to cut through branches, tree limbs, and even small trees. It is also useful for trimming hedges, cutting through thick grass, and clearing away debris. The ego pole saw is a great tool to have on hand for
You can put up to three extensions on a Milwaukee pole saw. This will give you a reach of up to 15 feet, which should be more than enough for most jobs.
If you're looking to cut branches that are more than a few inches in diameter, a pole saw is going to be your best bet. These saws come in a variety of sizes, so you'll want to make sure you get one that's appropriate for the thickness of the branches you're looking to cut.
COPYRIGHT © 2019
