Best Bath & Shower Grab Bars in 2022

Moen 8724 Home 24-Inch Bathroom Grab Bar, Stainless Review:

Moen R8918 Home Care 18-Inch Concealed Screw Bath Safety Bathroom Grab Bar, Stainless Review:

A grab rail has a low probability of failure by design. It is robust, fine, and appealing. A separate tale is the grab bar's shipping (Amazon's packaging). Because the grab bar is made of sturdy steel, I believe the person who packed it in the box reasoned, "Well, this should weather any shipping tribulations, so I'll just place the item loose in the box without any padding or bubble wrap." However, it is plain to me that shipping boxes do occasionally get pressed down firmly during transit, and this was clearly the case with this cargo. At one end of the grab bar, one of the neat-looking caps was severely dented. The steel used to make the caps is substantially thinner gauge. Since they are purely decorative and serve to conceal the screw hardware holding the grab bar to the wall, they do not necessarily need to be as robust as the grab bar itself. I didn't protest or demand a replacement be sent because I had to use the bar immediately away because my wife was coming home in a wheelchair and I wanted to prepare the restroom. Instead, I took my time reshaping the cap with pliers and a hammer so that it would once again fit and serve its purpose of hiding the screws. It is not lovely. The fact that bath towels hang on the grab bar most of the time helps to hide the ding, but it is still present. The cap and the remaining portion of the bar both appear to be in good condition.

Moen 8912 Home 12-Inch Bathroom Grab Bar, Stainless Steel Review:

While the bathroom was being renovated, we put them in. The best course of action was taken. They are a safety net for anyone who has a minor dizziness issue when coming out of the shower or getting up from the toilet, even if they are not disabled. Ours are robust and prevent us from slipping, which is the main reason elderly people end up in hospitals. They are mounted on pine paneling, where they are for us. They came in various sizes, so I immediately got them all without thinking about what I truly needed. They were just placed where the remodelers thought they would work best. Due to his seizure disorder, my husband frequently trips and falls in the restroom. These are sturdy enough for him to grip onto and prevent a fall to the floor. Product is good; no problems.

12 Inch Stainless Steel Shower Grab Bar - ZUEXT Shower Handle, Bathroom Balance Bar - Safety Hand Rail Support - Handicap, Elderly, Injury, Senior Assist Bath Handle (w/ Self-adhesive Stick-on Hook) Review:

These 12" grab bars were purchased twice for my basement stairwell. Being tall, I would have to stoop over by around 9" to grab the current stair rail at the top. It is not a problem once I have descended one or two steps because I can reach back just a little to grab the rail. Additionally, climbing up is not too difficult for me because I can grab the door frame at the top.After some trial and error, I chose to install the grab bar with the low end towards the top of the stairs and at a 30 degree angle to the horizontal. Because of this, I can easily grip it using my arm's and hand's natural angle. A few feet from the bottom of the stairs, at the landing where the stairs turn 90 degrees, I similarly installed the second grab bar.The grasp bar feels robust but is lighter than I had anticipated. Even though there are no instructions, installation is simple. After sliding the covers over the bar, bolting the flanges to the bar, and screwing the flanges to the wall, you must remove the decorative covers from the mounting flanges.The grab bars come with drywall anchors and mounting screws. I would advise against utilizing the drywall anchors and instead having you screw at least one end to a stud. I was fortunate in that both ends of my grasp bars had handy studs.I'm not sure where they got the 12" figure from. They are roughly 10" in the grab region, 11" between the flange centers, and 13" between the outside margins of the flanges. The diameter of the bar is approximately 1".

Changing Lifestyles Safe-er-Grip 11.5" Balance Assist Bar Review:

I provide geriatric patients with home health care as an occupational therapist. I'm always looking for particular adaptable devices to make the bathrooms of my patients safer. Unfortunately, many people won't compromise on looks in favor of safety! As a result, they won't put genuine grab bars in their tiled showers because doing so would ruin the tile.This item is useful in the situation. Before choosing this brand for my patients, I looked at a few others. Since then, I've tested it on a variety of surfaces, and depending on how you position it, it produces diverse outcomes.I've tried it on walls, and for about a half-hour, it sticks. Not at all. You'll hurt yourself in the end! It will come off even if your wall is not textured.It will be quite useful if you use it as a handle to enter and exit your bathtub. No matter how hard you pull, that sucker won't budge. Additionally, when you try to get your legs over the edge, it isn't high enough to grab them (thinking more of geriatric patients who have hip and knee range of motion problems).Your outcomes in the real shower area can also vary. The ideal option is a smooth-surfaced shower, like one made of laminate or fake tile. I have, however, also had some success with tiled showers. Just make sure that one of the suction cups is placed solely over a tiled surface and not a grout region. Sometimes the grout lines don't offer the cup enough surface area to generate a strong suction.The bottom line is to make sure you place this on a surface that can receive a good seal. Allow the grab bar to rest idle for four to five hours. During this time, if it were to fall off, it would do so naturally. If it's still on after that, you can probably continue. But I would repeatedly tug on it just to be sure.I ran a few test runs on surfaces in my house after my initial purchase. I made the decision to save the box and everything packaging and return it without thinking twice if it didn't work out. I've already placed four of them in the homes of my patients, which says a lot considering I stand to lose if they don't work out.Revision 3/13: Several years afterwards... Back then, I gave this counsel to a small number of patients, but I simply advised them to utilize it for stability. Now I'm holding back even that suggestion. Even the brands I was "recommending" at the time are no longer on my list because I've had a lot more experience with them. To be cliche, they can't be completely trusted, therefore it's best to be cautious than sorry. I hate to contradict myself, but even a few weeks later, I have personally witnessed an excellent, tight seal falling off in someone's hands. Not good at all. There may be no other choice if you rent your place of residence and your landlord won't let you install actual bars, but I would tug and check these bars every day, especially before you intend to hold it. Even in these conditions, tub clamps and tension bars may provide better stability than suction cup grasp bars. That's my updated perspective.

Changing Lifestyles Safe-er-Grip 17" Bath & Shower Handle Review:

An alternative that is considerably superior, stronger, and safer is a shower handle that is bolted into the wall. However, there are occasions when that is not practical, particularly in my rented property. So, after many failures, I finally bought two Safe-er-Grip and have now figured out how to keep the damn things attached to the shower wall. I want people to benefit from my experience. I foolishly began by just pushing the handle on the shower tiles to lock the small levers in place. The following morning, the Safe-er-Grip was still on the tub's bottom.Since then, I've experimented with a variety of ideas and have finally been successful in maintaining both handles tightly on the wall for more than two months. It necessitates some work.The tiles must first be thoroughly cleaned. I use a product designed for glass-top stoves that is strong but won't scratch. With a sturdy, stiff brush, scrub the tiles well. Then, thoroughly rinse the residue away with water. The handles are next. I discovered that Vaseline worked after numerous failures. Each of the spherical disks needs to have a reasonably thick coat applied; a thin coat will not do. The Vaseline covering is roughly 1/32 to 1/16" thick, in my opinion. After that, lock the levers by pressing the handle firmly into the tiles.They typically remain in place for a week or two. The key is to apply a bead of Vaseline all the way around the disk's perimeter using more Vaseline on your finger. The "stay life" has now been extended for—I don't know how long. The bad news is that you need to replace the Vaseline bead around once a week. I don't know if water washes it away or if it dries up. However, I am aware that for me, a weekly application has been keeping it in place for the past two months.I never rely on this handle for anything heavy because it is obvious that the disks cannot bridge a grout line. However, it does assist this 89-year-old man in maintaining his balance and feeling considerably safer when taking a shower.Hope this was useful. Guy

OXO Good Grips Stronghold Suction Grip Bar, Brushed Nickel Review:

The grip bar was readily removed from the packaging when it arrived in attractive packaging. The "Use

AmeriLuck Suction Bath Grab Bar 16.5" with Indicators, Bathroom Shower Handle (White, 2 Pack) Review:

Although this review is positive, I was prepared to write a negative one when I first received these. I found a solution to my issue.The indicator dot, which might be a terrific and comforting feature which glides from red to green when the suction is holding, wasn't functioning consistently. The left suction would only move to approximately 25%, occasionally 10%, or not at all, while the right suction would travel to 90% green. But it continued to hold. I tried several different places, but the indicator discrepancy persisted. In a tile location where the left one misindicated, the right one would.The remedy (applied a few days ago; it still seems to be working): I carefully massaged a drop of body moisturizing lotion onto the indicator dot, and presto! The indicator is now moving to 100% green while the suction is operating. It is on red when it's not functioning. Green indicates that it is holding.Before they leave the plant, they need to lubricate these indicators.

AmeriLuck Suction Bath Grab Bar 12" with Indicators, Bathroom Shower Handle (White, 2 Pack) Review:

It is crucial that the nonporous, smooth, and thoroughly clean surface you are attaching cups to is these qualities. For roughly one to one and a half hours, I've found that the cups hold really well. They do not continue on forever. The safety indicator on these cups can give you a false reading at first, indicating that the cup isn't entirely keeping its shape when it actually is. I repeatedly depressed these tiny square indications until they loosened up and began to function more effectively. These work wonders as a band-aid. You should have no trouble getting the cups to stick if you clean the area where you're intending to attach them with detergent and a scour pad. Install shortly before use, remove after use, and store them on their sides rather than on the cups.

GreenChief Suction Grab Bar 2 Pack -12” Shower Handle & Bathroom Balance Bar wit - Grip Bath for Bathroom - Safety Hand Rail Support - Handicap, Elderly, Injury, Senior Assist Bath Handle, Cup 4" Review:

The product was just as described. The grab bar attached firmly to the shower wall when I tested it. I have a fibreglass shower enclosure with a smooth wall. The grab bar should be verified before each usage to guarantee a secure attachment, according to the given instructions. So far, I'm really happy with the goods.