If you're looking for a replacement fuel pump, you might be wondering if aftermarket options are any good. The answer depends on a few factors, but in general, aftermarket fuel pumps are a good option if you're looking to save some money. Just be sure to do your research to find a reputable brand that offers pumps that are compatible with your vehicle.
Yes, drum pumps really work. They are an easy and efficient way to move large amounts of liquid from one container to another. Drum pumps can be used to transfer gasoline, oil, water, and other liquids.
Most electric fuel pumps are designed to run continuously. However, there are some that are designed to only run when the engine is running. This type of fuel pump is usually found on older vehicles.
A fuel pump is a device that moves fuel from the gas tank to the engine. The fuel pump’s job is to maintain a certain amount of pressure in the fuel line, which is necessary for the engine to run. If you’re looking for a way to increase performance, then changing your fuel pump may be a good option. A higher-performance fuel pump can provide your engine with the extra fuel it needs to run at higher speeds. Additionally, a higher-flow fuel pump can also help to improve your engine’s efficiency.
4.6/5
Heavy Duty / High Speed Siphon Pump for Petroleum Products, Light Oils, Kerosene, Diesel, Deodarants, Mild Corrosives, Chemical Insecticides, Soaps, Detergents, Mild Acids, Antifreeze, Liquid Waxes, Gasoline, Water (Including Drinking Water)…etc.
Suction Tube Diamter: 1 Inch / Suction Tube Length: 33.4 inch / Discharge Tube: 47.2 inch'
Drains up to 1 pint per 5 strokes or 5.5 Gallons per Minute
BPA-FREE: Safe for Emergency Drinking Water or Wine, Beer…etc.
Fits 15, 30, & 55 Gallon Drum Barrels / Air-Vent on Top Controls the Flow
$234
I began out looking for an electric pump, but the most of them are not safe for drinking water and are very pricey. Even though I wasn't shopping for a manual pump, I came on this one and decided to get it because it seemed really simple. It easily attaches to my 55-gallon drum. On level ground, it drained my drum to about 2/3 before losing suction and requiring re-priming. At about 1/4 drum left, I had to repeat the process. If the drum were raised on blocks or something similar, it would likely drain it to about an inch remaining in the drum.I bought two of these because I was so pleased with them: one for fresh water and one for everyday use.
4.4/5
Length of siphon tube 34"
Drains up to 1 pint per 3 strokes
3/4" In Diameter
This is a heavy duty, high speed manual suphon pump
$234
Wow. I just got this. This week, I returned a different one since it wasn't well-engineered. This one is built and designed better.CAP: With moderate pressure, it works nicely and doesn't want to strip (other pump felt like someone had used it already, and overtightened it) The redesigned pump also had a "stop" to prevent the cap from unscrewing completely. (Like I want to dig around in my basement for this extremely important component.)PUMP: The working stroke feels good, and the pull strokes' endings are stopped. Red plastic encloses the bellows, which operate using the "push down" motion. The second pump's visible bellows, which operated on the "pull up" stroke, seemed as though they might rupture if they were tugged on too firmly and stretched past their breaking point.ASSEMBLING THREADS: These threads are tuned correctly. There are still plenty of threads after hand tightening the barrel bung hole for only 1 1/2 turns. The barrel bung threads, which are made of softer plastic than the pump threads, are simple to cross-thread. I fixed some minor "mushing" on the first two of bung threads by reinstalling the barrel bung cap and tightening, releasing, tightening. Despite being patched up, the threads weren't actually damaged, and the pump wasn't to blame. Not a major deal, but I wish there was a wrench for this. My bung's threads didn't quite match the other pump's threads.SHUT-OFF HOSE RETAINER: It works. The entire corrugated hose can be forced through this. The hose retainer hole on the other pump would only accommodate the hose's smooth 2" end. Corrugated sections with bigger diameters couldn't fit through. So, the hose came loose and was hanging close to my basement floor.PUMP ACTION: After the initial priming strokes, it maintained siphon action (maybe 3-6 strokes). The other pump could not keep the siphon going.I'm glad I got a better pump than the one I had before for the same price. I'm grateful. Your results may differ.
4.2/5
Suction Tube: 1.5" ; Outlet Tube: 1"
NOT used for gasoline and drinking water!
Flow Rate: 35 liters per minute
Light and Portable with High Quality Plasic Pump Body:PPS,PP
3 pieces of suction tube with threaded connectors & 2 pieces of discharge spout
$234
My only complaint is that it is a little shaky when it enters the barrel but it is not a major matter because there is no rust or corrosion to worry about.
4.2/5
Delivery volume of 4.2 Gallon per Minute ( 16 Liters per Minute ) / Buttress Adapter & Drum Bung Adapter Included!
Electric Drum Pump for 15, 30 & 55 Gallon Drums with Telescopic Suction Pipe ( 1.9 feet to 2.8 feet ) & Full Control Nozzle / Caution: Do Not leave Pump unattended with Nozzle in Locked Positiion while Refueling!
Compatible with Diesel, Gasoline, Kerosene, DEF, AdBlue, Antifreeze, Windshield Washer Fluid, Detergent, Water (NOT for drinking water), Water based media, Agricultural Chemicals & Light Oils
Please Note: That this Pump is NOT Compatible with Acids, Alkalis, Corrosive media, Solvents, Acetone, Lacquer, Mineral Oils, Solvents, Turpentine, Heavy Oil or Drinking Water
Pump Type: Electric Drum Pump | Power: Electric ( DC 12V ) | 1.4 inch Telescopic Suction Tube (Diameter)
$234
I spent some time searching Amazon for a motor to pump liquid from a 30 gallon barrel to a drain. Sump pumps received the best reviews, but I couldn't possibly fit a submersible pump in a 2 inch aperture. A water transfer pump was another choice I discovered. The bad news is that most needed priming before use, and evaluations indicated that it was extremely noisy. Since I'm utilizing this in a laboratory or clinic with walls, I wouldn't want to use it inside if the pumps were noisy outside.Fortunately, I discovered when exploring other websites that they have electric barrel pumps. I chose it because the length can be altered to fit the size of the barrel or container thanks to the telescopic intake. It also had a bung adaptor that could be used to change how the screw-on connection to the barrel opening was made.The best part is that it is silent. We probably took 15 minutes to pump out 4 30 gallon barrels. This has served as the ideal solution thus far, and hopefully it will do so for a very long time.
4.1/5
Steel discharge spout
Supplied with 5 foot hose
3 position handle for different fluid viscosity
Includes 12 inch drum cover
Fits 5 gallon pails
$234
This pump is the best of its kind I've ever used; it operates flawlessly with no spills, drips, or leaks. It is also very well made. I took my time and poured 10 gallons of hydraulic fluid into my tractor in about 25 minutes. For a 5 gallon bucket, it takes roughly 200 strokes to pump this fluid at a rate of about 3 oz per pump. Excellent, there aren't enough positive things to say about how easily the fluid is moving with absolutely no mess. Advice: To prevent leaks at that place where the little tube for mounting the hose screws into the pump body, use thread lock or some other sealant when assembling the pump. You should also dispense with the hose clip and use a conventional hose clamp instead. Last but not least, remember to remove the black plastic cover from the pump's end before operating (duh). I pumped Kubota UDT-compatible Valvoline VV 813 fluid into the middle hole on the handle. Thank you. This pump will appeal to you!
3.4/5
1-1/4" (32 mm) Inlet Port and 3/4" (19 mm) Outlet Port
Heavy-duty Cast Iron Pump Housing. Zinc Plated, Corrosion-resistant Suction Tube
Discharge Capacity: One Gallon (3. 8 L) per 14 Revolutions
Ideal for Commercial, Automotive, Farm and Industrial Applications
Maximum Discharge Height: 16. 5 ft. (5 m),
Pump Height: 4. 3 ft. (1. 3 m).
For transferring Non-Corrosive, Petroleum based Fluids, of Light to Medium Viscosity - like, Motor Oils, Heavy Oil, Transmission Fluid, Heating Oils and Machine Oil, etc. , Kerosene or Diesel Fuel
Fits 15 to 55 Gal. Drums (57 to 210 L) with Standard 2" (50 mm) Bung Opening
$234
This pump is required if you want to store gasoline in a 55 gallon barrel.I transport my fuel in No-Spill 1450 Five Gallon gas cans. My fuel is kept in a 55-gallon barrel. I can swiftly fill a 5 gallon gas can with the help of this pump. Any model with improved performance costs more than twice as much. I've experimented with the pump and syphon hoses. However, they move painfully slowly and easily spill. This hand pump operates quickly and spill-free. Simply buy it!
3.3/5
Include 2†NPT bung adapter; 2†buttress adapter for plastic drums & 79†long corrugated P.E. hose with a Poly nozzle with Stainless steel 0.7" diameter Sprout Nozzle
Suction Tube Height 33.5" (for 55 Gallon Drum) / Pump Speed: 7 GPM / Power Source: DC 12V - 20V
NOT for Gasoline / Flammable Liquids / Concentrated Acids/ Drinking Water
Rechargeable Battery N Charger Available - (Pumps 106 gal. per charging) (option) / DC cable for Car / Marine Battery Available (option)
$234
The finest money I've ever spent, I purchased this with a 55 gallon drum and a mobile dolly. Being a woman, it was killing me to repeatedly raise and hold a full 5 gallon fuel canister to fill a tractor that is almost 5 feet from the ground. The best money I've ever spent, I simply pull the tractor up like I'm at the gas station and fill up.
If you're looking to upgrade your car's fuel pump, you may be wondering if it really matters which one you choose. The answer is yes and no. It matters in terms of performance and longevity, but not so much in terms of compatibility. As far as performance goes, aftermarket fuel pumps often flow more fuel than stock pumps, which can lead to increased power. But if your car is running fine with the stock pump, there's no need to upgrade. In terms of compatibility, most fuel pumps will work with most cars. However, it's always a
There are a few ways to figure out what fuel pump you need. One way is to look at the manufacturer's specifications for your vehicle. Another way is to look at your vehicle's fuel system and determine the flow rate and pressure that you need. You can also look at aftermarket options to see what will work best for your vehicle.
To pump liquid out of a drum, you will need a pump that is compatible with the size of the drum. Once you have the pump, you will need to attach it to the drum. Once the pump is attached, you will need to turn on the pump and the liquid will be pumped out of the drum.
A barrel pump is a type of pump that is typically used to move liquids from one container to another. The pump consists of a cylindrical barrel with a handle on one end and a spout on the other. The barrel is filled with the liquid to be transferred, and the handle is used to pump the liquid out of the barrel and into the desired container. Barrel pumps are often used to transfer fuel from one container to another, such as from a fuel can to a vehicle's gas tank. They can also be used to transfer other liquids, such as water, oil
A 1 hp water pump can push water up to 34.7 feet.
An aftermarket fuel pump typically lasts for around 50,000 miles. However, this can vary depending on the make and model of the vehicle, as well as the quality of the pump.
COPYRIGHT © 2019
