Best Automotive Replacement Windshield Wiper Nozzles in 2020



UTSAUTO Windshield Washer Hose Kit 200CM (6.5ft) & Windshield Washer Nozzles with Connector for Most Cars Review:


Mice had chewed through the rubber tubing on my windshield washer system, order this kit and everything provided fit perfectly allowing me to make repair in about 5 minutes. You should examine your windshield washer system from washer fluid tank to the sprayers and be sure where the repairs should be made so you'll know how many feet of tubing you'll need and how many connectors (and what type) you'll need for the job. I only needed one of the connectors that came in the kit, but I used 5 feet of tubing. Vehicle: 2014 Toyota Tacoma.



2011-2016 Ford F250 F350 Super Duty Windshield Washer Hose & Jet Nozzles OEM Review:


The hose arrived with some sort of plastic quick couple male fitting. However, my truck did not have this. After I pulled the old rubber hose off the plastic pump line, it was clear I just needed to fit the new hose onto this barb. So I simply pulled the plastic coupling off the new hose (could have cut) and slid the bare hose onto the barb - done! 10 second resolution.

Only one of my spray nozzles was broken. However, when removing the offending nozzle, it cracked and broke immediately due to age. So be sure to replace them both.

Hose lengths and retaining clips were all perfect in length. Made for a 2 minute job to replace. Seriously.



OTUAYAUTO Front Windshield Washer Nozzles - for Chrysler, Dodge, Jeep, Ram - Replaces OEM #: 4805742AB, Spray Jet Kit (pack of 2) Review:


The new head snapped right into place, no problems. As you can see in the picture (and as others have noted), the nozzle design is different, but still effective.

Installation tip: I was able to get the broken-off part of the old nozzle out of the hose by threading a wood screw into the end of the hose. Actually, that's what I had to do on the road when the old one broke - to block the loose hose so that the other nozzle would get fluid! The screw broke the brittle plastic into pieces that I could shake out. Also, bending the rubber hose also breaks up the last bits of brittle plastic.

One caveat: the pictures imply that the gasket is separate from the nozzle. At least, that's what I think is showing in the item picture. I didn't have any extra parts, and there's a gasket already on the nozzle just like the OEM part I removed.



2 Windshield Washer Nozzle Kit fit for 2005-2016 Jeep Grand Cherokee, 2005-2013 Chevy Malibu, 2005-2010 Pontiac G6, 2007-2010 Saturn Aura, Replacement for 55372143AB, 15247800, 55156427AB, 55079049AA Review:


 Installed on a 2013 Dodge Durango. Took about 5 minutes to disconnect the broken one and install the new one. Super easy. I used a pair of pliers to pop the old one out since it has clips holding it to the hood. I read some reviews that said that these spray a jet stream instead of a mist. The video I took should clear that one up. I only swapped out the driver side one and I noticed that the puddling on the hood only happens if you aren’t moving forward when you use the windshield washer on the car. AKA, if you’re going to test it while sitting in your driveway, keep a towel on hand and dry the puddle after you’re done testing.
Good buy.
Not expensive.
Easy install.
It works like it’s supposed to. Tadaaaa!



Windshield Washer Nozzles Kit, for Chrysler, Dodge, Jeep, Ram - OTUAYAUTO Washer Jet and Fluid Hose with Connector Review:


The new head snapped right into place, no problems. As you can see in the picture (and as others have noted), the nozzle design is different, but still effective.

Installation tip: I was able to get the broken-off part of the old nozzle out of the hose by threading a wood screw into the end of the hose. Actually, that's what I had to do on the road when the old one broke - to block the loose hose so that the other nozzle would get fluid! The screw broke the brittle plastic into pieces that I could shake out. Also, bending the rubber hose also breaks up the last bits of brittle plastic.

One caveat: the pictures imply that the gasket is separate from the nozzle. At least, that's what I think is showing in the item picture. I didn't have any extra parts, and there's a gasket already on the nozzle just like the OEM part I removed.



2 Pack Windshield Washer Wiper Nozzle for 2008-2016 Ford F250 F350 F450 F550(OEM part number: 7C3Z17603A,BC3Z17603A) Review:


╔ ■ Price Point / Value: 5/5
╠ ■ Quality: 4/5
╠ ■ Installation: 5/5
╠ ■ Recommendation: 4/5
╠ ☼ Overall: 4.5/5
╠ ►Product Need: Ford replacement nozzle
╠ ►Product Pros: Price, easy to install
╠ ►Considerations: Guarantee
╠ ►My Review: I took a gamble on these for the price after breaking mine replacing the wiper and have been pleased. They are a whole lot cheaper than what I saw in store. Installation took only a minute too which was great. These are made of plastic and there isn’t a lot to mess up with them. I only wish there was a guarantee on the item that it would work for all users, but it does come with a 1 year warranty.



Early Bus Perfect Replacement Single Hole Windshield Washer Nozzle Wiper Spray Kit Universal fit for Chrysler PT Cruiser Dodge Avenger Journey Jeep Compass Pack of 2 Review:


By the description I wasn't sure if then would fit my 2016 Nissan Frontier but they looked the same. When they arrived I can tell the the holes were different & they are but these spray a wider pattern on the windshield & Works better then the stock part that I got from the Nissan dealer at $30+ a piece. I have some bright blue gunk in my washer tank that I believe is from some bad (Rain-X) fluid thats causing my nozzles to clog. Hopefully I've got it all out now.



Front Windshield Washer Nozzles Wiper Spray Kit Single Hole for 2005-2016 Jeep Grand Cherokee 2005-2013 Chevy Malibu 2005-2010 Pontiac G6 2007-2010 Saturn Aura (2 pack) Replace # 55079049AA Review:


I would like to start out saying that this product should do exactly as it says. So if this will fit your vehicle and you need a replacement (mine is a 2011 Jeep Grand Cherokee) I would say there is no reason not to get this. It was very simple to replace, and it sprays the window decently. The only reason I took a star off is because I only had to replace 1, so I have 1 original nozzle and one of these replacement nozzles. This nozzle does have a “thicker” spray over a smaller area. The original spray nozzle covers 2/3 of the windshield and has a fine spray. This one is more of a broken stream, that gets the job done, but doesn’t necessarily spray the full half of the windshield.
At the end of the day, it is very easy to replace, it does spray on the windshield, (and honestly it does focus it’s efforts on where you actually look out the window) and does exactly what it needs to... just is different from the original (which is probably just personal preference, not functionality.