4.8/5
Suitable 9500lbs-17000lbs - Series wound and permanent magnet
Solid heavy duty construction
500 amp 12 V Winch Solenoid
Wireless remote compatible
Sealed and corrosion resistant
$234
The printed directions are not clear. To figure out what you need to do to make something work, you need to know what you're doing. I purchased this to replace the solenoid on my Badlands winch. Compared to the solenoid that came with the winch, this one looks to be more durable.
4.7/5
Compatible with 8000lb-12000lb winch with DC 12V (series wound and permanent magnet)
Compatible with Wireless Remote Systems
Package includes: 1X 12V 500A Winch Solenoid Relay
Pre-cutting mounting bracket for easy installation into control box
Come with shatterproof sealed and corrosion resistant case
$234
Does what it promises to accomplish. On the Cherokee, there was an old Smittybilt 8K. Regarding the solenoid's wiring, it resembled a bird's nest. This spring, I got stuck in the woods and the winch wouldn't operate. The winch was bench tested, and all connections were cleaned and lubricated. Added a wireless control to this little one's wiring, and presto. I probably saved myself 250 for a harbor freight. YouTube offers all of the solutions.
4.4/5
12V Solenoid Relay Contactor & Winch Rocker Thumb Switch COMBO for ATV UTV
The installation procedure included states clearly how to install. It is easy and just follow the instruction.
Please note your winch model diagram/picture in the following section for further instrution. Also, Please disconnect vehcile ground and positive leads from the battery before you begin.
Do not attempt to install wiring when the battery is connected!
$234
My Superwinch LT2000 received a great update to replace the factory-supplied switch and contractor. Installation was simple, and value for money was good. I preferred the smaller size because there was more space for other stuff when it was fitted in the tool box of my four-wheeler. Additionally, the wire studs provide stronger, simpler connections than push connectors for each wire.
4.3/5
Rubber seal for great weather resistance
accepts .250 quick disconnects
Double Pole Three Position
rated at 20a (30a peak)
Fits standard .83 x 1.48 inch hole
$234
My 2000 Toyota Tacoma's factory-provided accessory slots "almost" fit the accessories perfectly. Sadly, the body is only marginally too wide (by around 1/16"). With a little Dremel work, I'm sure I could make it fit, but I chose to look for an other approach. The rocker unit feels reliable when in operation, however I didn't bother wiring it up because it doesn't meet my demands. It appears like a sturdy piece of hardware, so I'll keep it.
4.3/5
Compatible with Wireless Remote Systems with two remote control
Compatible with 8000lb-12000lb winch with DC 12V (series wound and permanent magnet)
Power by 12V 23A battery for each remote (battery is not included in package)
Package includes: 1X 12V 500A Winch Solenoid Relay + 1X 12V Wireless Winch Receiver + 2X 12V Wireless Winch Remote
Come with shatterproof sealed and corrosion resistant case. Solid heavy duty constructed
$234
no wiring schematics
4.1/5
Includes rocker switch, wiring, mounting hardware and installation instructions
Handlebar mounted
For use with contactor/relays of 12V ATV/UTV winches
Waterproof/Weatherproof electric switch
Wires into the contactor/solenoid
$234
My little winch (from Harbor Freight) only came with a wireless control. Its response was far too slow for the purpose I wanted (raising a snow plow). The changeover was flawless. It seems to be of decent quality, and connecting it to the contactor that my winch uses to steer the winch was simple. The remote control is the smaller of the two parts in the control box and is simple to recognize thanks to the small black wire antenna and the absence of high capacity connections. Connect the wires from the new switch to the proper terminals on the contactor after removing the old one and insulating the hot section of the remaining red wire. To get the proper in/out function, you might have to switch them. This is simple and prevents the need to repair the contactor, which is nearly as expensive as the winch. Once more, many thanks to Amazon for making it simple to find items of this nature and for selling them at competitive prices.
3.8/5
ã€Creative Application】The switch The LED light fixtures of car, boat and yacht, such as led light bar, headlights, tail lamps, work lights, fog lights, auxiliary lights and so on.
ã€Installation Effort-saving&Time-saving】The switch can be installed horizontally or vertically. For install the switch panel conveniently, the item Includes stainless steel screws.
ã€Excellent After-sale Service】If you want it, please confirm the specifications of the item. The switch is suitable for 12V-24V 15A vehicles or ships, 5 Gang, 3 Pin. The items have 1-year warranty. And any question, please Feel free to contact us.
ã€Single Light Switch】There are 5 single on-off switches of the 5 Gang switch. Each switch controls the its own LED device.
ã€Trustworthy Quality】The switch is made of high-quality aluminum alloy panels and ABS material. The material is the most durable on the market. Because of high-waterproof, the use-life never decrease even if it is applied to boats.
$234
TL;DR: A good product that feels durable and performs as promised. Note that this switch has three prongs.I purchased this switch to use as the main on/off switch for the 12 volt DC loads in my van. It is constructed from a heavy metal plate that feels quite solid. It should be noted that the various switches can be removed. Usage is unaffected, but during installation, I experienced a couple button pop-outs as I connected wires and applied pressure from the back. Having said that, it is possible to personalize this panel. The light also illuminates when in use and is off when not. I removed the positive chain and left the negative ground alone so I could have several inputs on various fuses and only need one ground wire from this part of the system. The preconnected wires would also be very convenient if utilizing a single input source.
3.6/5
Pre-made cables
Everything needed to install an auxiliary control switch at the boat's helm
Includes sealed switch and bezel
$234
You don't need need it, but it is very convenient to be able to sit down and raise and lower the anchor whenever you choose without getting up. This way, it didn't matter that we only had one anchor because it was hidden away in the rear corner of our pontoon.
COPYRIGHT © 2019