5/5
â—† 9006 HB4 fog light Equipped with Constant Current Intelligent IC LED Circuitry Technology and Aluminum Circuit Board. Fast thermal diffusion ,heat-resistant, no digital and VHF radio signal interference.
â—† Fits for 9006 HB4 led fog light. Color :6000K Xenon White Fog Light Bulbs. 3200 lumens for both 9006 LED bulbs, about 1600 lumens for each 9006 led fog light. Voltage:12V - 24V DC.Max Capacity: 80W .
â—† Extremely bright output fog bulbs lamps .Application:Fog Light ,Spot Light ,NOT fit for headlight and high / low beam DRL.
â—† Directly plug and play for most vehicles,9006 HB4 fog light easy installation,no ballast required.For built in CAN-BUS system vehicles, may need the load resistor or decoder to avoid the error code or blinking issues
â—† 1 Year free manufacture's warranty ,100% Satisfaction Guranteed . For any problems , pls contact us directly via email .
$234
They met my expectations; the bulbs are quite bright and improve the appearance of my visibility when it's foggy. They're adequate, bright enough, and they arrived swiftly. Since nothing has ever been a problem and the seller goes above and beyond to ensure that you are happy with their product, they deserve a rating of 5 stars. I wouldn't think twice about buying from this supplier again. Value for the money
4.5/5
ã€1 Year Warranty】We offer 1 year warranty, full-refund is guaranteed within one year since your purchase in case of any quality defection or dissatisfaction or incompatibility. We would always be at your service please feel free to contact at any time.
ã€Important Notice】Works for 12V DC only. Please double check your owner manual/original bulb or check compatibility with us before purchase. CANBUS may not be compatible to the newest European vehicle. For some vehicles, extra load resistors maybe required to avoid the error code or blinkering issue.
ã€Heat Sink Cooling and Energy Saving】The aviation grade aluminum body design makes heat dissipation more efficient, which ensures lower working temperature and much longer lifespan up to 50,000 hours.
ã€Widely Used】Perfect replacement for all 42MM festoon led bulbs, compatible sockets: 578, 211-2, 212-2, DE3423, DE3425, 214-2,569, 211, 211-2, 212, 212-2, 214-2, 569, 578, 6413, 6429, etc.
ã€Premium Quality】Pack of 4, each 578 led bulb has 15 super bright 2835 chipsets. Built-in CANBUS driver to avoid error code for most cars. No Polarity, No Flickering.
$234
I reviewed a similar set of lights in a similar manner. These are incredibly brilliant and will illuminate the interior of the car, but because they are a little bit larger than halogen lights, they might not fit in the housing they currently occupy. Basically depends on the car you're installing them on. The lights on my Hyundai fit well, however even though they were the same light, the fixture on my relatives' Toyota was too narrow and the LED was simply too large. So be cautious of the size variations. However, if you purchase the more pricey Sylvania brand, they fit perfectly. I got one simply to give it a try, but it's not as bright as this one and there's no size difference like there is with this one.
4.4/5
HD projector lens: Designed with high refractive index optical lens for the best light output as fog light, 360 degrees full angle light bring you an astounding emitted light effect
Longer lifespan: 6063 Aircraft Grade Aluminum mold ensures efficient heat dissipation,built-in intelligent IC driver makes the bulb more stable and durable, up to 20,000hrs long service time
Extremely bright: Each bulb has 16pcs high power XBD led chips, 80W max capacity, operate at 7.8W, 6500K xenon white,1800 Lumens, much brighter than halogen bulbs
Compatible with H10, 9040, 9140, 9045, 9145, 9050, 9155. For fog light and daytime running light(DRL) use only. NOT for headlights and high/low beam DRL applications
Note: Amazon filter system may not be 100% accurate, the bulb size may vary between trim of your vehicle. Please double check owners manual or original bulb size to confirm
$234
They were the perfect complement for the LED headlights I had recently added, so I ordered them. There are 6500 headlights. These bulbs have a distinct yellower color. The white LED headlights or headlight rings are not a perfect match, but they are not nearly as yellow as the original halogens. Bright and simple to connect in. I merely assumed folks would be interested to realize they are not truly white.
4.2/5
Fitment: Fit bulb sizes: 9145 9140 H10 9045 9040. Use for daytime running light and fog light. These bulbs are not headlight bulbs, please make sure the correct model before purchase
360 degree illumination: Each bulb is equipped with 27 pieces of high power 2835 led chips, glass projector lens widely spread the light. 6000K white lights match your cool white LED headlight bulbs
Product details: Cool xenon LED light. SEALIGHT LED Bulbs are instant-on, no warm time. IP67 waterproof. No extra wiring needed, the bulbs can be installed in 20 mins
Stable performance: Low power consumption, energy-saving. All-in-one aluminum profile as heat conduction system, 360 degree heat radiating. IP65 waterproof makes it can work in all weather conditions
Easy installation: Almost same size with halogen bulbs. Easy to install, plug and play without modification, non-polarity. The bulbs are without CANBUS. Some sensitive car maybe need canbus to decode
$234
As of March 2019, one of the lights in the product that I bought at the end of January 2019 has already failed. As soon as I switch it on, it will flicker. I intended to return them, but it has been too long, so I must now purchase a new set.Edit: They offered to give me a refund or a replacement for the item. They called me after seeing my rating, but I never said anything to them. Excellent customer service that is really appreciated. There will inevitably be a few malfunctioning lights among the many that they produce.
4.1/5
Fitment: Fit bulb sizes: 9145 9140 H10 9045 9040. Use for daytime running light and fog light. These bulbs are not headlight bulbs, please make sure the correct model before purchase
360 degree illumination: Each bulb is equipped with 27 pieces of high power 2835 led chips, glass projector lens widely spread the light. 6000K white lights match your cool white LED headlight bulbs
Product details: Cool xenon LED light. SEALIGHT LED Bulbs are instant-on, no warm time. IP67 waterproof. No extra wiring needed, the bulbs can be installed in 20 mins
Stable performance: Low power consumption, energy-saving. All-in-one aluminum profile as heat conduction system, 360 degree heat radiating. IP65 waterproof makes it can work in all weather conditions
Easy installation: Almost same size with halogen bulbs. Easy to install, plug and play without modification, non-polarity. The bulbs are without CANBUS. Some sensitive car maybe need canbus to decode
$234
Good looking LED set. To replace the incredibly dull factory halogens and better complement the LED headlights, I installed these in my 2018 Subaru Forester fog lights. I had no trouble fitting these bulbs into the existing housing during installation. As previously indicated, neither light turned on when I first joined the wiring, however after twisting the plugs for each, they both turned on. There are no difficulties with faults or codes appearing. I didn't use a canbus adaptor or a resistor.I've been driving at night for about 45 minutes, and I haven't observed any flickering or fading. On the road, the light color almost exactly matches my headlights, but when viewed from the front, it has a little distinct hue. You can clearly see the difference between the two light patterns horizontally over either side of the road since they have more fuller and brighter output. In order to keep the light out of the way of approaching vehicles, the bulb also maintains the "cut-off" at the top of the light throw. With these LEDs instead of the factory halogens, your vehicle's visibility on the road and in bad weather is much improved.I have to say that these are much brighter than I had anticipated for a reflector style housing. Would be curious to see more proof that these are in fact DOT certified. We'll see, but I didn't mind when people flashed me in displeasure. Non-compliant bulbs or improperly positioned lights on cars really irritate me; it's rude and insulting to other drivers. It is not worth it to endanger the safety of other drivers in order to have a "cooler look" or brighter light. I won't hesitate to remove these bulbs, or at the the least, to add a darker coating to reduce it, if I believe that they are doing that. If so, I'll revise this evaluation.Overall, I'm happy with these bulbs so far; if anything changes, I'll let you know. Phillips LEDs, which cost $125, were what I was intending to purchase, but they gave the same response as these. In my opinion, these are worthwhile to try at this pricing.Images of the exact packing I received, the before-and-after installation process, are also included.
4/5
Product details: Cool xenon LED light. The external driver can keep the bulb constant light output. IP67. No extra wiring needed, the bulbs can be installed in 20 minutes
High quality: Premium seoul LED chips, 360 degree full angle illumination, 6063 A-Grade aluminum shell material with excellent heat dissipation. Good visibility to replace the original halogen bulbs
Easy installation: All-in-one compact design, just plug and play. Non-polarity plug
Fit for 9145, 9140, H10, 9045, 9040 bulbs. Common use for daytime running light and fog light. These bulbs no high low beam function. Please make sure the correct model before purchase
Compatibility: 12V voltage, perfectly meet most vehicle's request. Perfect choice for 9145 9140 9045 9040 fog lights or day-time running lights, but not suitable as headlight bulbs
$234
Wow. Autos with LED technology for beam placementis progressing quickly! highly impressedIn a location with fog, the beam pattern and output luminesce at a 1 to 1 ratio.This guarantees obtaining the greatest light output and beam pattern—truly outstanding construction quality! Fanless means fewer components are at risk of failure. With no modifications to caps or housings, sealight practically fits wherever. I'm pleased with the results. Sealight wins the day! Connect and play! use some safeguardsFor the sake of your connections, make sure you wear gloves when handling the bulbs. If at all possible, peek through the housing when you install the bulb to avoid striking the leds. once through the lock collar!Install took 30 minutes!Only one bulb was pulled.71vdc!!!!HID systems require expert tech installation and can draw up to 30 amps. This is only for use with fog lights, high beams, or single beams.Sealight products are also available for hi/lo setup, and I haven't been this happy with anything in a long time!Or yelling!That is a 200% increase in light and a 70% reduction in usage.everyone benefits! 2012sFseries.
4/5
Product details: Cool xenon LED light. The external driver can keep the bulb constant light output. IP67. No extra wiring needed, the bulbs can be installed in 20 minutes
High quality: Premium seoul LED chips, 360 degree full angle illumination, 6063 A-Grade aluminum shell material with excellent heat dissipation. Good visibility to replace the original halogen bulbs
Easy installation: All-in-one compact design, just plug and play. Non-polarity plug
Fitment: Fit bulb sizes: 5202 5201 PSX24W 2504 (not for Japan vehicles). Use for Daytime Running Light and fog light. No high low beam function. Please make sure the correct model before purchase
Compatibility: 12V voltage, perfectly meet most vehicle's request. Perfect choice for 2504 H16 fog lights (European type), or daytime running lights, but not suitable as headlight bulbs
$234
fantastic stuff I adore the style. more attractive and brighter than the original equipment halogen lamps. a pure, brilliant white light. No more repulsive yellow light.Some people claim that this truck's installation was challenging. But I finished both in under 15 minutes. This is how:1. Starting from the side you are working on, turn the wheel out.2. Using a T 15 Star driver, remove the star head screws on the front side of the inner fender well. You only need to get rid of five of them. Three on the outer edge and two in the center of the inner fender.3. Gently remove or push the inner fender to one side. You can now access the fog light.4. While the original light is still in the socket, unplug it.5. Pull the light out by squeezing the top and bottom flanges.Install your new LED light in step 6.7. Connect it.8. Verify that it functions.9. Place your inner fender back in position and tighten the star screws.That side is finished. Do the same on the opposite side now.Enjoy.
3.9/5
★ã€Fits Socket】The 194 LED bulbs are compatible with T10 W5W 158 147 152 159 161 168 184 192 194 193 901 904 912 916 917 918 920 921 922 923 926 927, etc. Canbus error free.
★ã€Super Bright】Pack of 10, Voltage : DC 12V, Power: 2W/PC, 6000K white. Low power consumption and longer life span. Each T10 194 bulb has 18 pcs 5730 chips on it, 360 degree lighting angle, no blind spot, brings your car a refreshed new look. WAREM TIP: This light is polar, if it does not light when connected, please try the reverse side
★ã€Wide Application】The 194 LED bulbs can be used for license plate lights, map lights, dome light, front/rear side marker lights, trunk cargo room lights, turn signal lights, glove box lights, inner tail light bulb, etc. Great for many light applications around the car.
★ã€High Quality Product】These 194/ T10 LED light bulbs Buy with Confidence. If you have any questions, please feel free to contact us.
★ã€Easy Installation】Easy to install, just plug and play, small enough and strong adaptability to fit your car.
$234
I've determined that projector housings work better for LED lights than reflecting housings. After having excellent results with my low beam LED lights used in projector housing, I bought these H16 fog light bulbs. My fog lights are enclosed in reflective housing, and the LED headlights really brought out the yellowish tint in the halogen fog lights. These undoubtedly equal the headlights' white brightness, but they don't appear to cast as much of a light down the road as the halogens they replaced. Halogen lights often produce an oblong light pattern, whereas LEDs appear to produce a horizontal pattern. Consequently, they don't appear to be as effective in contrast. Fog will be the only genuine test, and it should appear this winter. However, at least in the classic sense, I am not yet impressed with these as fog lights.UPDATE: My worries that the fog lights wouldn't function as intended when we had fog in the Pacific Northwest for nearly a week. As fog lights, these are NOT appropriate! An ellipse light should be sent along the road advance by fog lights. These categorically don't. In fog, the large horizontal pattern they cast is worthless. They complement the LED headlights nicely when they are on, however in fog they are useless.
3.7/5
(Set of 2pcs LED bulbs) Each bulb had Extremely Bright High Power Newest Version 3570 CSP-Chips .3200 raw lumens per pair, 1600 raw lumens for each bulb, Temperature Color: 6000K White,Voltage: DC 12V-24V,Working Life: 30000 hours long service life.
Easy To Install: Plug and play,Petite design means installation is as simple as a halogen bulb. Install these bulbs in as little as 5-10 minutes!
CUSTOMER SUPPORT: Some vehicles may cause flicker after installation (this is not quality issue, please, contact us for assistance if flicker). If you are not sure what kind of lamp you have, please, contact us and we will choose correct connector.
Use For: Fog light ONLY. Structure: 6063 Aluminum body for better heat distribution and built in stable Constant Current IC Driver. Note: This is a product without Canbus. Most vehicles just plug-n-play, for some European Vehicles, maybe required load resistors to avoid the error code or blinking issue
Fit bulb Socket(options): H1,H3,H7 ,H11=H8=H16 JP,9005(HB3),9006(HB4)
$234
Factory fog lights for the 2016 Honda Odyssey Elite.The design of this H11 LED product is good. For low placed fog lights, a reflective stem with horizontally opposing chips is the best option since it places the chips where they will best utilize the reflector. Although the projected light pattern is somewhat more diffuse and has a looser upper beam cutoff than an incandescent filament, some users might like it. However, because no light is shining directly from the lamp's tip, the beam does not irritate oncoming motorists. decent a compromise Compared to stock halogen H11, overall light output is marginally better.This LED fits the H11 housing and connector perfectly. robust construction. A excellent design has no fans.decent pricing.These have yet to prove their durability, but there is no reason to believe they won't.Other remarks:No issues with dash notifications or flickering on these car's fog lights. Resistors are not required.If you're searching for a perfect color match, this LED is better than the stock halogen H11 fog light, but not nearly right, at 6000K color temperature, which is notably bluer than the xenon HID headlights on this car. It would appear that the 2016 Odyssey Elite's stock xenon HID headlamps would work best with a color temperature of 4500K.installation of fog lamps in 2016 To reach the fog lamp sockets on a Honda Odyssey, you must lift the front of the car, unfasten the wheel well splash guards, and bend the splash guards forward. PITA, but workable for someone who is handy. Make sure you have a socket wrench, a tool for removing fender fasteners, and a few extra fender pop-fasteners to replace any that you lose or damage.No matter how well made, the 9005 daytime running lights on this car are not suitable for LEDs because they require dual power for both the DRL and the high beams.To achieve the finest color match to HID headlights, keep the original beam pattern, and maintain DRL high beam functionality, think about using Philips CrystalVision halogen for this car's H11 fog lights and 9005 DRL.
3.6/5
THE SYLVANIA STANDARD OF QUALITY: With 100+ years in business, Sylvania is the world leader in automotive lighting for Original Equipment Manufacturers (OEMs) and the aftermarket.
MANUFACTURED TO BE DURABLE: XtraVision bulbs are designed and manufactured to improve your driving situation while providing maximum durability.
LIGHTS DIM OVER TIME, REPLACE IN PAIRS: Your lights are a pair, one is never turned on without the other. If one bulb burns out, the other isn't far behind. Replace your H11 XtraVision Halogen bulbs in pairs for optimum performance.
MORE DOWNROAD VISIBILITY: XtraVision bulbs have an enhanced downroad visibility with no added glare.
RELIABLE DESIGN FOR OPTIMAL PERFORMANCE: XtraVision bulbs have a robust filament design and propriety gas mixture that can be driven for superior performance.
$234
Your text will be rewritten by QuillBot. Start by typing or pasting something into this box, then hit the enter key.
COPYRIGHT © 2019
