5/5
PACKAGE INCLUDED: 1 x Engine Guard ( As Pictures Shown )
Triple dipped chrome finish with 1 1/4" metal tubing ; Mounting hardware included ; No modification needed
Condition: Aftermarket 100% Brand New ; Superior quality and Durable
Color: Chrome Size: Shown in the picture
Fits '04-later XL and XR models (except XL1200CX, XL1200T, '16-later XL1200X, '18-later XL1200XS and '11-later XL883L). Will not fit with Front Spoilers.
$234
The bar comes with four screws and four washers, however the threads on the washers don't match the holes, so I'm not sure what they're for. Fortunately, I had already purchased a similar model for my older Sportster, and based on that knowledge, I knew the hardware wouldn't work.Therefore, go to the hardware shop and purchase 2ea 3/8-16 stainless steel button head bolts (bigger head with the hex hole for an Allen Wrench) and 2ea 3./8" stainless lock washers while you are waiting for the crash bar to arrive. The bottom mounting point will employ the bolts you recently purchased. The engine mount is the highest mounting point, and the two existing bolts are long enough to pass through both the existing engine mount and the crash bar.My old crash bar on my 1997 Sportster was wider than the bike's foot rests, so I had also anticipated it to be a little bit broader. Compared to the mid mount foot rests on my Sportster, this one is narrower.
4.6/5
Color: Chrome ; Material: Iron ; Size: Shown in the picture
Condition: Aftermarket 100% Brand New;Easy to install,No included instruction and mounting hardware
Replace's OEM part#HD49004-00, Fits '00-'17 FL Softail models.
Triple dipped chrome finish with 1 1/4" metal tubing
Package Included:1X Engine Guard
$234
Would have been good if nuts were provided, but my neighborhood hardware store can easily fix it. Additionally, I needed high glass for the Mate finish, which was a simple fix with some automotive glass clear varnish. Overall, I'm happy with the way it was built. Note that when it first arrived, the two lower mounts protruded from the box and there was NO BUBBLE WRAP to hold them there. As a result, both mounting plates were silver and severely damaged. Runs to the hardware shop for spray paint are made once more. I've now put an additional $35 over the cost, so I'm still ahead of what HD is asking for comparable crash bars.
4.6/5
Fits Yamaha Star 1300 2007-Newer
1-1/4" Tubing Designed to Accommodate Clamp Mount Peg System
Mounts Into Existing Frame Holes With Hardware Provided
$234
If they hadn't been difficult to install, I would have rated them a 5. Chinese and precision should not be used interchangeably. The holes could have been somewhat larger to make alignment easier. It's also a smart idea to have two people wait. I completed it on my own in about an hour. I know the I fo says 2008 and 2009, but I believe these will fit all 2013 V Star 1300s. They look great on my car. If more bolts had been utilised on the frame, installation would have been much simpler. Mine cost $108 on eBay with free shipping. Good looks and good chrome are both present.
4.5/5
Package Included:1X Guard Bar ( As Pictures Shown )
Color: Chrome; Material: Iron; 1 1/4 " (32mm) Diameter Metal Tubing
Fitment:Fits '00-'17 FL Softail models.
Superior Quality And Durable,Replaces OEM:#49140-05
Easy To Install,No Included Instruction And Mounting Hardware
$234
Would have been good if nuts were provided, but my neighborhood hardware store can easily fix it. Additionally, I needed high glass for the Mate finish, which was a simple fix with some automotive glass clear varnish. Overall, I'm happy with the way it was built. Note that when it first arrived, the two lower mounts protruded from the box and there was NO BUBBLE WRAP to hold them there. As a result, both mounting plates were silver and severely damaged. Runs to the hardware shop for spray paint are made once more. I've now put an additional $35 over the cost, so I'm still ahead of what HD is asking for comparable crash bars.
4.4/5
PACKAGE INCLUDED: 1x Engine Crash Bar
Material: steel tubing,Position: Front;Accepts Engine Guard Mount Footpegs.
Conditon: Aftermarket 100% Brand New;Protect your bike without sacrificing ground clearance or style. Designed to complement the lines of the motorcycle.
Color: Dull Black;Tube Diameter: Approx. 1-1/4" (32mm)
Fits ’09-later Touring and Trike models (except FLRT). '10-'11 FLHXXX models require the separate purchase of Steering Damper Bracket P/N 83865-09.
$234
I'm thrilled with this purchase. Very identical to the stock part, but at a significant discount for my Road King. The item was carefully wrapped to protect the chrome and arrived earlier than expected. Additionally, three new bolts are included.Excellent chrome polish; it will look fantastic on the bike. For your review, I've included photos of my original engine guard next to the replacement component as well as a picture of the top of the bar that attaches to the frame.
4.2/5
Color: Black;Material: Iron;Weight:4kg;Size: 1 1/4"
PACKAGE INCLUDED:1X Set Engine Guard ( As Pictures Shown )
Condition: Aftermarket 100% Brand New
Superior quality and Durable ; Triple dipped Black finish with metal tubing
To Fit Harley Davidson '04-later XL and '08-'13 XR models (Except '11 XL883L) (will not fit with front spoilers)
$234
My sportster's chrome highwaybars needed to be swapped out with black ones. These are perfectly adequate. went on smoothly
4.1/5
Color: Black;Material: Iron
PACKAGE INCLUDED:1X Set Engine Guard ( As Pictures Shown )
Superior quality and Durable ; Triple dipped Black finish with metal tubing
Weight:4kg;Size: 1 1/4";Condition: Aftermarket 100% Brand New
To Fit Harley Davidson '04-later XL and '08-'13 XR models (Except '11 XL883L) (will not fit with front spoilers)
$234
The bar comes with four screws and four washers, however the threads on the washers don't match the holes, so I'm not sure what they're for. Fortunately, I had already purchased a similar model for my older Sportster, and based on that knowledge, I knew the hardware wouldn't work.Therefore, go to the hardware shop and purchase 2ea 3/8-16 stainless steel button head bolts (bigger head with the hex hole for an Allen Wrench) and 2ea 3./8" stainless lock washers while you are waiting for the crash bar to arrive. The bottom mounting point will employ the bolts you recently purchased. The engine mount is the highest mounting point, and the two existing bolts are long enough to pass through both the existing engine mount and the crash bar.My old crash bar on my 1997 Sportster was wider than the bike's foot rests, so I had also anticipated it to be a little bit broader. Compared to the mid mount foot rests on my Sportster, this one is narrower.
4.1/5
PACKAGE INCLUDED: 1x Engine Crash Bar
Condition: Aftermarket 100% new and high quality,Color: Chrome
Tube Diameter: Approx. 1-1/4" (32mm)
Material: steel tubing,Position: Front
Fits ’09-later Touring and Trike models (except FLRT). '10-'11 FLHXXX models require the separate purchase of Steering Damper Bracket P/N 83865-09.
$234
I'm thrilled with this purchase. Very identical to the stock part, but at a significant discount for my Road King. The item was carefully wrapped to protect the chrome and arrived earlier than expected. Additionally, three new bolts are included.Excellent chrome polish; it will look fantastic on the bike. For your review, I've included photos of my original engine guard next to the replacement component as well as a picture of the top of the bar that attaches to the frame.
3.8/5
Aftermarket 100% Brand New
Package included : 1 X Highway Crash Bar
With always fast and free shipping on every order,focusing on Quality and Service,so you can shop with confidence
For Indian chief classic 2014-2018,chief vintage 2014-2018,chieftain 2014-2018,chief dark horse 2016-2018,chieftain dark horse 2016-2018,chieftain classic 2018,chieftain elite 2017,chieftain limited 2017-2018,roadmaster classic 2017-2018
Material: Iron
$234
Bars that are well-made and affordable without sacrificing quality. I bought the rear highway bars and the moustache bars. Very happy! The right side floorboards had to be removed, but other than that, installing them was quite simple with the correct equipment. Torque wrenches are required. The floorboards and lower screws were 35 lb-ft in torque, while the upper bolts on the moustache bar were 18 lb-ft, according to the maintenance manual I downloaded. The rubber foot guards moving around is the only issue, but I ordered an Indian foot rest for the highway bar based on comments from forum users that they fit, and I'm still waiting to get them. I'm glad I decided to buy it.
COPYRIGHT © 2019