LED light bars are an excellent way to improve your vehicle’s lighting. They are much brighter than traditional lights and can significantly improve your visibility on the road. LED light bars are also very durable and long-lasting, so you won’t have to replace them as often. Overall, LED light bars are a great investment and are definitely worth the cost.
Yes, you can drive with an amber lightbar as long as it is mounted in a legal and visible location. The main purpose of an amber lightbar is to increase your visibility to other drivers, so it is important to make sure that it is mounted in a way that allows other drivers to see it easily.
Yes, you can use LED light bars on the road. In fact, many people use them to improve their visibility while driving. LED light bars are much brighter than traditional halogen bulbs, so they can help you see better in low-light conditions. Plus, they last much longer than halogen bulbs, so you won’t have to replace them as often.
4.9/5
$234
These lights worked well for my purposes, but I'm not sure I'd use them as driving lights because they don't have a particularly concentrated beam despite being very bright. 30 to 40 feet of useable light, possibly. Hey, they're fantastic for $20. we will observe their durability.
4.4/5
ILLUMINATED SWITCH: 3 pin on/off rocker switch with red indicator light when truing on, easy to turn on or off, has been passed test of 5, 000 times pressing.
Universal fit: compatible with all automobiles, boats and devices equipped with a 12V power source
CIRCUIT PROTECTION: Power relay-safety protection and conversion circuit. Blade fuse protects the circuit when overcurrent or short circuit occurs.
TWO AVAILABLE LEADS: With 2 sets of light output connectors for dual lighting fixtures less than 180W, the connection is more stable.
PACKAGE INCLUDE:1 x Wiring Harness Kit ,1 x Instructions,
$234
Are these Deals Any Good? A great deal in my opinion, I purchased one for my LED Bar and a few small LED Aux lights, spread the wiring out, and had everything planned out for installation. I was impressed with the way the wiring was put together and thought it would look professional if I took the time and extra care to make it look nice and neat, so I went to a hardware store to look at the wiring I would need and then a switch that I liked. With this setup, everything I needed to finish the task was included; however, I did purchase a few crimp-on male and female spade connectors. A few months later, I purchased a second set of these connectors as a backup in case I needed to use them on another car I own. I don't buy a lot of spare extra parts, but I know that it will only be a matter of time before I use my extra wiring sets. I'm very pleased with these and all for less than what the wiring alone would have cost me. Then a few more months later, I bought a spare, one of which I used, and two spare sets.
4.4/5
Universal: As the working voltage of this light bar is from DC 9 to 30-volt, it can be widely used to most of vehicle styles(Off Road, SUV, ATV, UTV, Trucks, Marine, Boat etc)
Incredible Brightness: With triple row light bar design and new 5050 SMD LED, light pods can provide 6000-kelvin super bright white light, 12800-lumen
Waterproof: As an off road light bar, it holds die casting aluminum shell, shockproof and waterproof features. It meets the IP67 international standard. certified by CE and RoHs and FCC
Rapid Cooling System: The thin radiator fins help the LED light bar cool down quickly, which leads to its incredible long life span, over 100,000 hours
Spot Flood Combo Beam: With 15° spot and 170° flood beam design, you can get extremes distant and wide view area lighting from the 4-inch pod lights
$234
These lights have been erected for the past three weeks. These lights are fantastic for the price.Despite the fact that I just use them as reverse/work lights, they are as bright as I had imagined they would be. Although it was fairly simple for me to wire them into one of my existing reverse lights, the wires on these are absurdly short. Even then, the wires can't connect the two.This week has brought us some rain, and I have seen condensation inside one of the rain gutters. I might apply a sealant to the edges. Considering the low price, it's a minor drawback.These lights seem quite modern, are very reasonably priced, and provide a lot of light—at least for a short distance. Just because I like lights, I'll probably purchase a brighter pair of the same brand for the front of my truck.
4.3/5
BETTER HEAT DISSIPATION: Quick cooling aluminum alloy heat sinks and high-quality heat conduction silicone gel can effectively extend the lifespan of the light bar to over 30, 000 hours.
PACKAGE INCLUDE: 2PCS 18W Flood Led Pods
HIGH PROTECTIVE PERFORMANCE: IP67 Waterproof Rate, waterproof up to 1 meter of water for 30 minutes and effectively dustproof. The stainless mounting brackets are rustproof and anticorrosive.
ADJUSTABLE MOUNTING BRACKET: With adjustable mounting bracket, the work light can adjust to about 45 degrees, which makes changing direction easier. . WIDESPREAD USES: The light bar can be compatible with almost all Jeeps, 4x4, Trucks, Motorcycles, SUVs, ATVs, Cars, Boats, etc. Many indoor and outdoor uses: Garden Lighting, Backyard Lighting, Back-up Light, Off Road Lighting, Construction Lighting and so on.
SUPER BRIGHT AND WIDE ILLUMINATION RANGE: Advanced LED chips give out bright and white ray for clear visibility. Special designed lamp cup leads to wider illumination range, allowing you to see the left and right clearly.
$234
On a Dodge 1500, it is used for a set of auxiliary reverse lights. Backing up at night and viewing through factory-tinted glass is difficult. I then tried using stronger light bulbs, but it wasn't enough. Connect these by connecting to the 7-pin, not the 4-pin, towing harness. Reversed is the center pin. These now turn on when the truck is in reverse. I measured them and found that they each consume about 2 amps, so the harness is not troubled. I then tightened the allen heads and, just in case, wrapped the cable exiting the lamp housing with a thin layer of silicon. The attachment worked out okay, however the threads on the metal block were stripped out, so we had to drill them out and use alternative screws. They are undoubtedly bright, and I can now see what is behind me. In fact, at night, people move when backing up. In my opinion, it is not legal to put them on a switch for inspection, therefore I wouldn't go doing that. They are indeed pointed outward and somewhat downward toward the truck's corner. We'll watch to see how they fare against time and weather.
4.3/5
Adjustable mounting bracket: the light bar can be adjusted to about 45 degrees, which makes changing direction of light beam easier
Perfect Combo beam: excellent visual effect, spot beam for long distance illumination, flood beam for broad view area
High brightness: Advanced LED chips and clear PC lens, powerful and bright light beam, let you see the forward dark road clearly
Package include: 1Pc 126W Combo LED light bar, 1Pc wiring harness and mounting brackets
Superior quality wires: good electrical conductivity, high temperature and melting resistant, outstanding bending performance
$234
I've generally liked the light. I mounted it on my work pickup so I could see better on the dilapidated dirt roads I must drive on a daily basis. Both forward and to the sides, it extends far. The brackets that come with it weren't my favorite, but I was able to make them work.So, just to make you guys laugh. I just used it a few times on Tuesday, January 2, 2018, after I had installed it. Around 5:45 on Wednesday morning, I had just put my truck in cruise control when I managed to hit a deer with the front of the vehicle. Mind you, I just placed this light bar there. The impact of the crash broke the bumper brackets, severed the wiring on the bumper, and launched the brand-new light bar into the air. I looked at the light bar today and decided to check to see whether it was still functional. Guess what it did then? So this is what I'm trying to say.This bar continues to work even after being tossed from a vehicle and making direct contact with a deer at 70 mph. Despite its rustic appearance, it is a fantastic item that has survived a test I believed would have killed it. I'd keep purchasing this one!
4.2/5
Wide application: can be used on tubes of 1", 1-1/2", 1-3/4" & 2" In diameter and applied to LED light bar for almost all kinds of vehicle
Package include: 2Pcs LED light bar mounting bracket
Easy installation: pre-drilled hole, allows more lights to be added on vehicle without drilling, Allen hex key included for quick installation
Useful rubber: high quality rubber inserts dampen driving vibration and avoid scraping bull bar surface
Sturdy bracket: strong aluminium alloy, fix the light on tube firmly, raise the light bar height to avoid scratches while driving
$234
These were purchased to fit on a grille guard. These items are attractive and well-made. They include lock washers and stainless steel allen screws. The foam tape they provide for applications is the only thing I have to complain about. It is simply double-sided foam tape, which would be difficult to install because it would be difficult to move the bracket once it has been secured in place. You might want to think about simply covering your bar in electrical tape for full 2".
4.2/5
BETTER HEAT DISSIPATION: Die-cast aluminum alloy heat sinks effectively dissipate heat, better cooling effect and longer lifespan
SUPER BRIGHT: Spot beam for long irradiation distance,flood beam for broad view area, combo beam provides excellent visual effect
HIGH PERFORMANCE: IP67 rate, protective housing and sturdy brackets, great performance of waterproof, dustproof and quakeproof
PACKAGE INCLUDE: 1PC 72W LED light bar and mounting brackets;Lumens:4790lm
ADJUSTABLE BRACKET: The mounting bracket can be adjusted and slid, offering convenience to adjust position flexibly when needed
$234
2019 update: My golf cart's lights are still operating flawlessly.I installed a 20-inch TV in my golf cart before adding this gadget "a Nilight LED. Long-lasting soldering joints with aluminum wire are a challenge, but I covered the solder joints with dielectric grease before heating the joint. Copper and aluminum don't go well together. It is not advised to use my soldering with a dielectric grease coating on mission-critical components. Typically, copper wires are of poor quality, but not on these inexpensive LEDs. The manufacturer made a trade-off in order to save money.I sealed the screws and the perimeter of the lens with transparent silicone RTV. These won't, however, stand out in the wet. Under the golf cart canopy, they are concealed.I don't need any brighter than this. I applied the wiring harness for the 20 that I had already installed "LED lights with a 40 amp relay are used. The 12 inch LED leads were simply spliced in using an automotive-style plug-together weatherproof connector. Wire a 72 watt bulb into the current wiring harness is acceptable because it only uses roughly 6 amps.View the installation's photos and use it when it is nearly dark. Keep in mind that these lights only have a few long lines and NO wiring harness. An electrical wire harness must be purchased.I have to admit that these lights are a real bug magnet. You must maintain your speed or you will be devoured alive by the bugs. LOL.
4.2/5
Upgrading reflector cup: the broad reflective plate on both sides allows multi-angle refraction, ideal for ambient illumination
Package include: 1PC 20 inch LED light bar and mounting brackets
High performance: IP67 waterproof rate, efficient cooling, die-cast aluminum alloy housing, over 30, 000 hours lifespan
Adjustable mounting bracket: the bracket can be adjusted and slid, offering convenience to adjust position flexibly when needed
Super brightness: Combo beam with triple row and nest reflector cup design in the middle for extreme light efficiency
$234
Roughly a year ago, I spent about $65 for an alternative light bar from Amazon. I'll make an analogy with this. Always remember that you get what you pay for.For $36, this lightbar is excellent. However, the accompanying hardware (apart from the bar) is inappropriate for this light bar. You will need to acquire 5/16" bolts and nuts in order to mount this lightbar. The supplied bolts are insufficiently long to mount (they are only around an inch long). Additionally, the actual mounting hardware itself (two brackets) is of poor quality. They cannot be turned around, unlike most light bars. Some customers might have to return this lightbar and buy one with reversible brackets as a result of this. However, you can definitely find these particular brackets online for a reasonable price.I recently installed it, and so far there have been NO difficulties. This light bar is just as bright as my previous light bar, which cost $65 in total. There is no chance that you will regret buying this. Just be aware that you'll need to make some adjustments to the brackets.
4.1/5
Brightness: 9pcs*3W high quality LED Chips at 6000K Color Temperature, illuminate your road clearly in the darkness, which will give you a more safe and comfortable driving experience. The light bar can be used for 12V- 24V.
Package Included:2pcs 27w LED light bar,2 sets of Stainless Steel Mounting Brackets, 2-year Warranty Card
High Performance:Portability and versatility with a tough, aluminum cover, tough shatterproof PC , Protective cover durable to withstand for any extreme usage condition
Long Lifespan: Our Light takes 1017 aluminum which can performance well in heat dissipation.The aluminum fan design, makes it dissipate heat more faster and effective which can extend the lifespan to over 50,000 hours
IP 68 Rating: Heavy duty metal housing is 100% water and weather and proof even in the extreme weather
$234
Harbor Freight was where I first purchased my fog lights. Adjusting them was the only challenge. It was difficult to adjust and tighten down to the bumper because it had a toothed base mechanism that only required one bolt. The fog lights could only aim up and at an angle because of the stinger bar's angled wings and the base it came with. I am able to point both straight ahead and farther down at these tiny light pods. In comparison to the halogen models I replaced, the profile is likewise significantly thinner. The wires that connected to the Harbor Freight fog lights only needed to be spliced. I no longer have two separate spot lights illuminating the trees at a 45-degree angle from one another. With this setup, I have greater control right now.
4/5
The light bar can be used for 12V- 24V.
SIDE MOUNTING BRACKET: The sturdy bracket can firmly fix the light bar. Quakeproof when passing through rugged terrain.
COMBO BEAM, CLEAR VIEW: Appropriate combination of spot beam and flood beam for wide spread and long distance illumination.
Material: 6063 Diecast aluminum profile, stainless steel bracket
HIGH BRIGHTNESS: Powerful 180W LED light bar, high-quality Led chips and clear PC lens, super bright white light dispels darkness.
WATERPROOF RATE: IP67; waterproof up to 3.3 feet of water for 30 minutes and effectively dustproof..PACKAGE INCLUDE: 1PC 180W LED Light Bar and Mounting Brackets
$234
Therefore, my 32" 180w bar did not arrive with mounting hardware. However, when I contacted Amazon customer support at (888) 280-4331, available 24 hours a day, she was unable to send me the necessary hardware and offered if I would want to accept a complete refund in exchange for keeping the light bar. Sure, I replied. so five stars. Finding a means to install it will be simple because there is only one threaded bolt hole on each side.The light is brilliant and excellent. It's not a Rigid or Baja, but for a small portion of the cost, this ought to be adequate for my 15-year-old Tacoma. I'll continue to update the evaluation (I promise, I know how helpful that is to people researching these).Since it appears that moisture is a typical weak point, I do intend to use silicone to seal around the lens and power line. I also intend to paint any non-stainless hardware before installing it. I want to use all of my Nilights for this.And I'll try to take some pictures.The following Nilight LED lights have been tested, used, and evaluated by me:The 18W 4" Flood bars throw and scatter light better and appear just as bright as the two-pack of 27W round floodlights, which are also a terrific deal.Avoid the -2PC 27W Round Spot. I placed them next to 27W round floods and found no difference between the two.Two (2) PC 18W 4" Flood Bars: excellent. highly recommended for bright light at a distance of up to 50 yards or less.Great small spot lights: 2PC 18W 4" Spot Bar. mounted as fog lights on my '02 Tacoma bumper, connected to my high beams.I find that for the money, the 18W 4" flood bars distribute light better than the 2PC 36W 6.5" Flood Bars, which worked okay but had a rather brilliant "halo" aspect to the light dispersion. In place of these, we chose the 18W 4" flood bars for a 6x6 Polaris Ranger UTV.2 piece NI18A-5 5.3" double-row Flood Bar: useful for fog/driving lights; moderately bright; broad flood dispersion; very flat wide beam. seem to be 6" 36w bars brilliant.Update: Just get in touch with Amazon or Nilight if you ever receive a Nilight that is missing any parts or hardware, and they will take care of it.09/2018 update: The system has around 6 months on it and two diodes have failed. The system occasionally flickers. I'll speak with Nilight and see what they have to say. No additional problems, no dampness (I did seal edges with silicone).
Whether or not light bars help in snow depends on the driver. Some people find that the extra light helps them see in the snow, while others find that it doesn't make a difference. Ultimately, it is up to the driver to decide whether or not they want to use a light bar in snow.
Light bars are a great way to improve the look of your car or truck. They can make it look more stylish and can even make it more visible on the road. However, they won't necessarily make your car or truck perform any better.
There are a few things to consider when choosing a light bar. First, decide what type of light bar you need. There are LED, halogen, and HID light bars. LED light bars are the most popular because they are the brightest and most efficient. Halogen and HID light bars are not as bright but they are cheaper. Second, consider the size of the light bar. Light bars come in a variety of sizes and you want to make sure you get one that is the right size for your vehicle. Third, consider the mounting options. Light bars can be mounted on
Light bars are a popular way to add extra light to a vehicle, but how long do they last? The answer depends on a few factors, including the type of light bar, the quality of the light bar, and how it is used. LED light bars are typically the longest lasting type of light bar, with some models lasting 50,000 hours or more. However, cheaper LED light bars may only last a few thousand hours. Halogen light bars have a shorter lifespan than LED light bars, but they are still much longer lasting than incandescent light bars.
The number of lumens you need for off-road driving will depend on the terrain and the conditions. For example, if you are driving in a desert, you will need more lumens than if you are driving in the mountains. In general, you will need at least 1,000 lumens for off-road driving.
A light bar is a good investment for any car. They are relatively inexpensive and can be found at most auto parts stores. The number of lumens will vary depending on the size and power of the light bar. A good rule of thumb is to get a light bar that is at least 50 lumens per inch. This will provide plenty of light for most applications.
COPYRIGHT © 2019