Best Audio-Video Shelving in 2022

Last update: January 1, 2023

TotalMount Hole-Free Remote Holder - Eliminates Need to Drill Holes in Your Wall (for 2 or 3 Remotes - Black - Quantity 1) Review:


really high quality stuff. Sturdy are the thick bottom and sides. On the wall of the conference room, the design is lovely and looks fantastic. I like that it is created expressly for 3M Command Adhesive strips and includes those instead of some subpar, cheap imitations. I'm quite pleased with this purchase and would strongly suggest it to others.



WALI Floating Wall Mounted Shelf with Strengthened Tempered Glasses for DVD Players,Cable Boxes, Games Consoles, TV Accessories, 1, Black Review:


The media shelf I just bought is by far the best value I've ever found. The product hangs neatly and professionally on the wall and is simple to install.The reason I only gave the shelf 4 stars is...If you want to shift the shelf, it is difficult to do so. The mounting screws are concealed by black cosmetic caps that you cannot remove without damaging, and if you're not careful, you could harm the shelf while attempting to remove them after installation.If you anticipate needing to remove the shelf in the future, there are two options.1. Don't put them in. Instead of utilizing the plastic cap, you can arrange the shelves over or close to the screw mounting sockets to conceal them.2. Use a piece of black electrical tape to seal off the area rather than putting the plastic caps. This would enable easy future removal of the shelves and be equally discrete.I wish you luck.



TotalMount Hole-Free Remote Holder - Eliminates Need to Drill Holes in Your Wall (for 3 or 4 Remotes - Black - Quantity 1) Review:


This item was pretty much the greatest choice I could find for what I had in mind. I intended to install this on the back of our 70-inch television and mount our remote controls high up on the wall (away from our toddler). The fact that it is black (to match our television) and mounts without screws made this the most appropriate thing I could find. It functions flawlessly thus far. Only two (extremely minor) issues bother me.1. This should be significantly thicker so that heavier remotes may be inserted and removed more easily. They sometimes stick.2. They should be available in a size larger than the 7.25" model. We could only fit three remotes total out of the five we have (TV, sound receiver, cable remote, Apple TV remote, and ceiling fan remote). This product would earn five stars if these two problems were fixed.



PERLESMITH Floating AV Shelf Double Wall Mount Shelf - Holds up to 16.5lbs - DVD DVR Component Shelf with Strengthened Tempered Glass - Perfect for PS4, Xbox, TV Box and Cable Box Review:


Hello there I appreciate you reading this, and good luck!Steven is my name.I've thus ordered a few of them, and I adore them!because I can stack three separate units or consoles, which makes the room look neat, tall, and little.I can have so much more space within my room now. LOL!In addition, I wanted to publicly state that I am an expert at installing these two because I felt like I did it so quickly. I am from Omaha, Nebraska. (I'm not even kidding) It is that simple.So, once you order one or a TV mount, if you ever need assistance or are unsure of what to do, let us know.Simply shoot me an email or SMS.I'll be more than pleased to help you with this! 👨🏻‍🔧



Floating Wall Mounted Shelf AV Mount Shelf - Holds up to 16.5lbs - DVD DVR Component Shelf with Strengthened Tempered Glass - Perfect for DVD Players, TV Box and Cable Box by PERLESMITH Review:


Hello there I appreciate you reading this, and good luck!Steven is my name.I've thus ordered a few of them, and I adore them!because I can stack three separate units or consoles, which makes the room look neat, tall, and little.I can have so much more space within my room now. LOL!In addition, I wanted to publicly state that I am an expert at installing these two because I felt like I did it so quickly. I am from Omaha, Nebraska. (I'm not even kidding) It is that simple.So, once you order one or a TV mount, if you ever need assistance or are unsure of what to do, let us know.Simply shoot me an email or SMS.I'll be more than pleased to help you with this! 👨🏻‍🔧



Floating Wall Mount Shelf - Single Floating DVD DVR Shelf – Holds up to 16.5lbs - Wall Mount AV Shelf Strengthened Tempered Glass – Perfect PS4, Xbox One, TV Box Cable Box PERLESMITH Review:


Hello there I appreciate you reading this, and good luck!Steven is my name.I've thus ordered a few of them, and I adore them!because I can stack three separate units or consoles, which makes the room look neat, tall, and little.I can have so much more space within my room now. LOL!In addition, I wanted to publicly state that I am an expert at installing these two because I felt like I did it so quickly. I am from Omaha, Nebraska. (I'm not even kidding) It is that simple.So, once you order one or a TV mount, if you ever need assistance or are unsure of what to do, let us know.Simply shoot me an email or SMS.I'll be more than pleased to help you with this! 👨🏻‍🔧



Crosley Furniture Everett Mid-Century Modern Media Console, Acorn Review:


This piece of furniture is fantastic. It was a media stand that I bought for my living room. I needed something that was built of solid wood, had sliding doors so that I wouldn't have to open them to use the DVD player and cable box, and was designed to look mid-century modern. That was all satisfied by this. It is made of solid wood and is stained the color seen in the images. I'll admit that when it first arrived and was unpacked, I was a little intimidated by the thought of putting this together, but assembly turned out to be rather simple. I completed it myself, however as I got to putting the cover that pulls up on, having a second hand would have been useful. Even that, though, I managed on my own with a little propping. I didn't rush, so it took me around two to three hours to put everything together. It would have been wonderful to have another hole in the back on the left side for the placing of other electronic devices that need to be plugged in on that side as well, if I had any complaints. Although I might ultimately add that, for now it functions just how I wanted it to.



Fitueyes 2 Tiers Av Shelf Wall Mount Shelf Black Bracket Stand for AV Receiver Component Xbox /Cable Boxes/Gaming Systems DS203801GB Review:


This Shelf performed my request exactly. I mounted mine to a stud, and I advise you to do the same. The glass shelves are excellent, have beveled edges, and come with rubber pads to place where glass meets metal. The shelf set is quite strong. I like that each shelf's mounting bolt can be loosened and the shelf may be leveled. I just leveled the shelf, sat down, and tightened the bolt firmly. The shelves were as stated in terms of size. The power transformer and an Xbox fit on the same shelf! It looked pretty beautiful because I was able to conceal all the cords. The fact that it came with Phillips head screws to install to the stud is the sole reason I awarded it four instead of five stars. I tried to pre-drill the holes, but it was difficult to do so without stripping the screws. I went and obtained hex head bolts to replace them, but the recess that they go through is too small for a socket to be attached to the bolt. I was unable to make the hole larger since a cover must fit in it after mounting. In order to put a socket in the hole, I had to grind the bolt heads down to the next smaller size. Here is how I would solve this issue. Pre-drill the holes after marking them. Obtain bolts with the same size hex heads. With a socket, fully embed the bolts in the wall before removing the device. Remove the bolts, reinstall the unit, and secure it using the included screws. The holes are virtually pre-threaded when the first bolts are installed and removed, making it easy to insert the Phillips screws. I advise the manufacturer to provide a larger plug and to enlarge the access hole. Hex head bolts might then be used to install it.



FITUEYES Black Wall Mounted Media Console Floating TV Stand Component Shelf DS210003WB Review:


! See the note about game consoles' fit and heat management at the end of the article!Simply make *sure* not to over-tighten the screws or they will slightly bulge the surface during assembly. Fortunately, the first two screws I over-tightened were on the bottom. took around ten minutes.There is no slack in positioning with the provided mounting holes - it is going to mount centered on two 16 inch spaced studs, and that's it. The instructions aren't very clear, the little metal clips are confusing at first and a real pain to attach unless you have a helper holding the thing up against the wall. This thing is hefty on its own, let alone when you have gear inside of it, so if you want to change that you'll need to carefully drill out your own holes in the backing and make sure you aren't too far to one side or the other.For the same reason, don't even consider using any kind of drywall anchors because the way force is directed due to the design makes it impossible for them to hold it (the weight isn't directed straight down, as drywall anchors are rated for, but rather outward and down, which will put too much pressure on drywall). It might work at first, but then one day when you get home everything is on the floor and your wall has two large holes, or worse. For the same reasons, I also advise against utilizing a drywall anchor and a stud at the same time. FYI)Despite the mounting difficulties, the finished product is very secure. If you mount this beneath a wall-mounted TV, as I believe most people do, and if the TV is already centered on two studs, as it should be, and those studs are 16 inches apart (the most typical arrangement in modern drywall homes), you should be fine if you use the same studs. It seems to have been created specifically to accomplish that.In terms of height, I positioned mine just slightly above (.5 inch) my wall sockets; this raised it off the ground enough to look attractive, allow for easy access, and create a neat appearance with no exposed cables or plugs. The rear shelves are perfectly oriented to accommodate routing and tie-wrapping wires, and there are cable grommets on the top and bottom. You may also purchase a set of these: 50 Pcs Viaky Self Adhesive Black Wire Clips, Adjustable Cable Clips To stick to the bottom, use Cable Management Cable Organizer Wire Holder Clamps in black. I did it to avoid having to tie them all up in the cabinet, where you might wind up with a noticeable cable rat's nest, and to prevent my power and network cords from dangling. You can't even tell there's anything under the couch while you're sitting down; it just appears to float there like it should.Three different positions for the shelves may be adjusted, which is useful.As several commenters have pointed out, the original XBox One stands out a little when it comes to video gaming systems. Both the One S and the One X (of which I have one) fit perfectly. It also fits the PS4 and PS4 Pro. The latter, though, has another issue with the way it handles heat.A sizable fan on top of the One X draws air in and exhales it out the side. As long as you leave a few inches or more between it and the top shelf (and obviously don't put anything on top of the One X itself), this will fit in the cabinet without a problem. However, the PS4 Pro draws air in from the sides and exhales it out the back. That strategy and this cabinet have two issues: first, the PS4 Pro under load (4K games, etc.) is loud enough as it is, and second, because the rear fan will be close to the back, the sound will be slightly increased via echo. Furthermore, and this is worse, the hot exhaust air has nowhere else to go but back out the front, over, and around the appliance, which results in the side vents sucking in the hot air that the exhaust fan just expelled.I'm not sure if this would damage the Pro over time because it's built to run hot, but it does ensure that if you start playing a game, for example, the fans are pretty much always on until you stop playing, so they'll never get cool enough to turn off. In fact, it's expected to increase hotter over a period of time.Because of how the Pro airflow is constructed, cooling pads won't work for this; instead, you need vents. There is at least one vent on the side (the area of the small shelf at the end where game boxes, etc., can be attached), and there is also likely one on the bottom, close to the back. I cut two small vent covers using a hole saw and screwed them into mine. Its location prevents me from blocking it with books, boxes, or other objects, but it does allow cool air to enter and heated air to exit. Or simply leave out a PS4 Pro:)Although you can DIY it rather easy, it would be wonderful if this were an option. Other than that, I like it, I think it looks fine, and it functions. Although I wouldn't place a TV on a stand on top unless it was incredibly small and light, soundbars work fine on top of it.



FITUEYES Wall Mounted TV Media Console Floating Desk Storage Hutch for Home and Office DS211001WB Review:


! See the note about game consoles' fit and heat management at the end of the article!Simply make *sure* not to over-tighten the screws or they will slightly bulge the surface during assembly. Fortunately, the first two screws I over-tightened were on the bottom. took around ten minutes.There is no slack in positioning with the provided mounting holes - it is going to mount centered on two 16 inch spaced studs, and that's it. The instructions aren't very clear, the little metal clips are confusing at first and a real pain to attach unless you have a helper holding the thing up against the wall. This thing is hefty on its own, let alone when you have gear inside of it, so if you want to change that you'll need to carefully drill out your own holes in the backing and make sure you aren't too far to one side or the other.For the same reason, don't even consider using any kind of drywall anchors because the way force is directed due to the design makes it impossible for them to hold it (the weight isn't directed straight down, as drywall anchors are rated for, but rather outward and down, which will put too much pressure on drywall). It might work at first, but then one day when you get home everything is on the floor and your wall has two large holes, or worse. For the same reasons, I also advise against utilizing a drywall anchor and a stud at the same time. FYI)Despite the mounting difficulties, the finished product is very secure. If you mount this beneath a wall-mounted TV, as I believe most people do, and if the TV is already centered on two studs, as it should be, and those studs are 16 inches apart (the most typical arrangement in modern drywall homes), you should be fine if you use the same studs. It seems to have been created specifically to accomplish that.In terms of height, I positioned mine just slightly above (.5 inch) my wall sockets; this raised it off the ground enough to look attractive, allow for easy access, and create a neat appearance with no exposed cables or plugs. The rear shelves are perfectly oriented to accommodate routing and tie-wrapping wires, and there are cable grommets on the top and bottom. You may also purchase a set of these: 50 Pcs Viaky Self Adhesive Black Wire Clips, Adjustable Cable Clips To stick to the bottom, use Cable Management Cable Organizer Wire Holder Clamps in black. I did it to avoid having to tie them all up in the cabinet, where you might wind up with a noticeable cable rat's nest, and to prevent my power and network cords from dangling. You can't even tell there's anything under the couch while you're sitting down; it just appears to float there like it should.Three different positions for the shelves may be adjusted, which is useful.As several commenters have pointed out, the original XBox One stands out a little when it comes to video gaming systems. Both the One S and the One X (of which I have one) fit perfectly. It also fits the PS4 and PS4 Pro. The latter, though, has another issue with the way it handles heat.A sizable fan on top of the One X draws air in and exhales it out the side. As long as you leave a few inches or more between it and the top shelf (and obviously don't put anything on top of the One X itself), this will fit in the cabinet without a problem. However, the PS4 Pro draws air in from the sides and exhales it out the back. That strategy and this cabinet have two issues: first, the PS4 Pro under load (4K games, etc.) is loud enough as it is, and second, because the rear fan will be close to the back, the sound will be slightly increased via echo. Furthermore, and this is worse, the hot exhaust air has nowhere else to go but back out the front, over, and around the appliance, which results in the side vents sucking in the hot air that the exhaust fan just expelled.I'm not sure if this would damage the Pro over time because it's built to run hot, but it does ensure that if you start playing a game, for example, the fans are pretty much always on until you stop playing, so they'll never get cool enough to turn off. In fact, it's expected to increase hotter over a period of time.Because of how the Pro airflow is constructed, cooling pads won't work for this; instead, you need vents. There is at least one vent on the side (the area of the small shelf at the end where game boxes, etc., can be attached), and there is also likely one on the bottom, close to the back. I cut two small vent covers using a hole saw and screwed them into mine. Its location prevents me from blocking it with books, boxes, or other objects, but it does allow cool air to enter and heated air to exit. Or simply leave out a PS4 Pro:)Although you can DIY it rather easy, it would be wonderful if this were an option. Other than that, I like it, I think it looks fine, and it functions. Although I wouldn't place a TV on a stand on top unless it was incredibly small and light, soundbars work fine on top of it.