Argon is a noble gas and is therefore non-reactive. This means that it is very unlikely for an argon gas cylinder to explode.
Gas cylinders can explode without fire if they are damaged, improperly used, or if the gas inside leaks out. If the gas inside the cylinder ignites, it can cause a dangerous explosion.
LPG can be used for gas welding but it is not as common as using acetylene. Acetylene is generally used because it provides a hotter flame.
While welding gas cylinders are designed to be safe, it is possible for them to explode. This usually happens because of a failure in the cylinder itself, or because of a gas leak. If a welding gas cylinder explodes, it can cause serious injury or death.
4.9/5
We are the ONE of the ONLY TWO gas cylinder manufacturers, whose products passed federal regulations and can be legally transported and distributed in the North American Market. All our gas containers are manufactured under USA DOT and Canada TC Certification and constant inspections.
With our own Patented formula, BLUEFIRE Modern MAPP Gas can provide the closest performances as the original MAPP gas, which means a significant increase in burning temperature than standard propane, while with a significant decrease in gas pressure than 99.5-100% propylene and propane products.
BLUEFIRE Modern MAPP is a modern substitute to the traditionally known MAPP fuel gas, which was discontinued since 2008. Currently, our product is the only real original MAPP gas substitute available in the North American Market.
Lower gas pressure of our formula, allowing us to fill more fuel content into the US standardized fuel cylinder, so each of our unit contains 16.1 oz fuel content, that's an exclusive 14% more bonus fuel compared to other popular fuel gas products selling on the market. Longer burning time for each bottle (30-45 mins extra working time by our lab tests) .
Hotter burn compared to the standard propane in the same circumstance, higher primary flame BTU, shorter brazing time. If you are a person that care about the temperature, our product is a perfect match for you.
$234
The map gas is awesome! works to free rusty nuts and bolts. When I had to replace the rubber line, I even managed to salvage my brake line by heating it up, spraying a little PB Blaster on it while it was hot, and working at a loose, back-and-forth motion till she came out! My brake line, which goes along the top of the axle, will be saved.
4.9/5
**To prevent theft of regulator, simply replace lynch pin on the Safety Cap with a #3 Master Lock**
Fits 3-1/8 Inch Collar
Fine Thread Safety Cap for High Pressure Cylinders
11 Threads Per Inch
Meets DOT, OSHA and MSHA requirements
$234
Fix my argon CO2 mix bottle, which is essential for use while traveling if your work truck has cylinders. My work vehicle has shelves and my fixed to the body to save time from having to unscrew the cap, connect the regulator, and then when finished, remove the regulator and screw the cap back on. Bullpen should now be open; simply turn on the valve.
4.7/5
Lower gas pressure of our formula, allowing us to fill more fuel content into the US standardized fuel cylinder, so each of our unit contains 16.1 oz fuel content, that's an exclusive 14% more bonus fuel compared to other popular fuel gas products selling on the market. Longer burning time for each bottle (30-45 mins extra working time by our lab tests) .
With our own Patented formula, BLUEFIRE Modern MAPP Gas can provide the closest performances as the original MAPP gas, which means a significant increase in burning temperature than standard propane, while with a significant decrease in gas pressure than 99.5-100% propylene and propane products.
Hotter burn compared to the standard propane in the same circumstance, higher primary flame BTU, shorter brazing time. If you are a person that care about the temperature, our product is a perfect match for you.
We are the ONE of the ONLY TWO gas cylinder manufacturers, whose products passed federal regulations and can be legally transported and distributed in the North American Market. All our gas containers are manufactured under USA DOT and Canada TC Certification and constant inspections.
BLUEFIRE Modern MAPP is a modern substitute to the traditionally known MAPP fuel gas, which was discontinued since 2008. Currently, our product is the only real original MAPP gas substitute available in the North American Market.
$234
The map gas is awesome! works to free rusty nuts and bolts. When I had to replace the rubber line, I even managed to salvage my brake line by heating it up, spraying a little PB Blaster on it while it was hot, and working at a loose, back-and-forth motion till she came out! My brake line, which goes along the top of the axle, will be saved.
4.6/5
Grill Torch Stabilizing Base
Propane Bottle Stabilizing Base, fit for any USA Standard CGA600 Fuel Gas Cylinders
Great accessory for portable torch + cylinder
Lantern Cylinder Holder
Safely Stand Propane or MAP gas Cylinder upright
$234
I discovered they were no longer manufactured after using my final Fat Boy MAPP gas tank. Since the torch is used in the kitchen, it's nice to have it be able to stand the cylinder vertically and safely. The Fat Boy was much more stable than the normal tall cylinders.This equipment is ideal for the task at hand.
4.6/5
Easy and simple use kit
The product is 14 1 OZ, Pre-Filled MAP-Pro Gas Torch Style Cylinder
The product is manufactured in United States
$234
extreme heat quickly warms up metal components (such as shock bolts and caliper bolts). quickly and without any "popping" charges the torch. We appreciate Worthington providing such high-quality fuel.
4.5/5
Easy and simple use kit
The product is 14 1 oz, pre-filled propane gas torch style cylinder
The product is manufactured in United states
$234
The majority of small, portable torch heads are compatible with this typical propane fuel cylinder. These cylinders are being used with a BernzOmatic TS8000, which may use fuel cylinders made of either propane or propylene. is less expensive than propylene but does not burn as hot. At nearby retail establishments, this propane cylinder typically sells for $2.50 to $3.00 per unit. Separate from the main connector on the top of the cylinder, they feature tiny fill openings. However, I've never been able to or found anyone willing to refill them. Thus, the four stars. It's unfortunate that you have to throw these away or recycle them after they are empty.For whatever reason, I expected to buy from Amazon merchant "TechnologyLK" a bulk pack of cylinders. Only one cylinder was delivered, and it seemed to take a while to do so. $19.75 was paid after shipping. If you have the option to buy them locally, it is NOT worth paying $19.75 after shipping for one cylinder. I have no idea why I believed I was receiving numerous cylinders after looking at their listing again. Because the cylinder is explosive, I suppose shipping was expensive? The cylinder I got from "TechnologyLK" is EXACTLY like the ones I buy locally for $2.50 to $3.00 apiece. In the future, I'll still buy from Lo*or *'s Ho** De***.
4.1/5
Meets DOT, OSHA and MSHA requirements
Griftan safety cap can be used for transportation with the valve closed.
Fits 3-1/2 Inch Collar
Fine thread 3-1/2" X 11TP 1 X 6-7/8"
Makes work areas safer where high pressure cylinders are used
$234
Fantastic product. The packaging was awful. I purchased 4 of these, and the only padding used was some inflated plastic bags. The powder coating is chipped off around the rim since they were all popped, leaving little protection. Even though they have some minor chips, these still function as intended.
3.6/5
DOT number is stamped on the tank.
All HP cylinders are within 2 years of stamped date.
Meets DOT and/or ISO regulations.
All HP cylinders come with a 10 year hydrotest date stamped.
Shipping only available to Continental US (Lower 48 States).
$234
You receive exactly what you anticipate. If you don't have access to a welding supply locally, this firm is fairly fantastic. I discovered a location nearby where bottles can be filled again, but I'm not sure if I can get THIS bottle filled again. If you can't get this bottle refilled locally, as another reviewer pointed out, it's an expensive investment for a temporary fix. Before purchasing, you might want to find out if your neighbourhood store has any problems with that.
3.6/5
All HP cylinders are within 2 years of stamped date.
Shipping only available to Continental US (Lower 48 States).
DOT number is stamped on the tank.
Meets DOT and/or ISO regulations.
All HP cylinders come with a 10 year hydrotest date stamped.
$234
Excellent value; on-time delivery; no problems. FedEx, on the other hand, treated this as HAZMAT, necessitating that I go to a secure FedEx distribution center, present identification, and sign for it. The employees couldn't order by tracking number and didn't understand what I was talking about, and it was still 40 minutes away. was ultimately located using the Amazon order number in their database. Everything took two hours.Overall, I'm really delighted with the purchase, but I don't think I will place another order; instead, I want to find a local distributor.
Welding gas does go bad eventually, but it can last for years if stored properly. Oxygen, for example, can last for over 10 years if stored in a cool, dry place.
To prevent a gas cylinder from exploding, you need to take proper precautions when handling and storing the cylinder. Make sure the cylinder is properly secured and not damaged. Inspect the valve and regulator to ensure they are working properly. Never store a gas cylinder in an enclosed space.
A small welding gas bottle will last for approximately 8 hours. This will depend on the size of the bottle and the welding gas mixture being used.
A welding gas bottle can last anywhere from a few days to a few months, depending on how often it is used. The average welding gas bottle will last about two weeks with regular use.
Welding gas costs can vary depending on the type of gas, the amount you need and where you purchase it. However, a bottle of 75/25 welding gas typically costs between $30 and $60.
Argon gas is used in many industries, including welding and glassmaking. A bottle of argon can cost anywhere from $30 to $100. The price depends on the size of the bottle and the supplier.
COPYRIGHT © 2019