A winch is a mechanical device that is used to pull in or let out a rope or cable. It is typically used to raise or lower a load. A winch can be powered by a variety of means, including manual, electric, hydraulic, pneumatic, and internal combustion. While a winch can be too big for a particular application, this is typically not an issue. If a winch is too big, it will likely be underutilized and may not operate as efficiently as a smaller winch. Additionally, a winch that is too big for
You can technically mount an ATV winch upside down, but it's not recommended. The winch is designed to be mounted a certain way for a reason. By mounting it upside down, you could be jeopardizing its performance.
No, you cannot run a winch upside down. The winch must be installed right side up in order for it to function properly.
Yes, you can tow with a winch. There are a few things to keep in mind, though. First, you'll need to make sure the winch is properly mounted and secured. Second, you'll need to choose the right winch line for the job. And finally, you'll need to be familiar with the proper winching techniques.
4.7/5
Fit Type: Vehicle Specific
Made in the USA
$234
This plate perfectly matched my 2017 Yamaha Kodiak. It is constructed from extremely thick steel (perhaps 3/16" plate), and it appears to be strong enough to support any 3000 pound winch. The gear you need to mount the plate to the ATV is included, along with extremely thorough installation instructions. My Champion 3000 pound winch fit perfectly into the holes that were bored for the winch. I heartily endorse this product.
4.6/5
3/16†steel construction with tough black powder-coat
ATV winch mount for select Kawasaki Brute Force ATVs (See fit chart in second image for complete listing.)
Easy installation, comprehensive instructions included
For use with all ATV winches from 2000 – 3600 pounds with 4-hole (3.00" x 4.875") or 2-hole (3.10" x 4.875â€) standard mounting pattern*
Two-year limited warranty
$234
Attach this to a 2005 Brute Force 750i. Fit okay, however because of my somewhat modified frame, the connection point to the tube frame was a little farther away on one side. If the frame wasn't bent, I believe it would fit just perfectly. simple installation took around thirty minutes. One of the u bolts did cause me trouble. The threads on the u-bolt were stripped by the nut. I did utilize it, but I changed a few of the threads to use those that were still there. And wasn't as tightened. It's made of heavy-duty 3/16 plate steel.
4.6/5
Unlike all other mount competitors our mounts are metal bead blasted before they are powder coated for the best possible finish prep. Powder coated black for supreme durability
Very easy to install Complete installation instructions included
All mounting hardware included Satisfaction guarantee
Roller fairlead and winch not included
100 percent MADE IN USA Constructed of 3/16" steel
$234
A 2016 Honda Pioneer 1000-5 Deluxe model is the one I own. I noticed that someone had returned theirs since it wasn't functional. Perhaps they installed it incorrectly. It was quite easy to install. Install the little plate on the frame. Attach the larger plate to the winch with the two back bolts. When removing the front bumper, you must remove 2 side bolts. While installing the large plate, insert the bolts on the sides. It maintains alignment. Bolt the two plates together, and I gave mine a slight lock. Set up your wiring. She does a great job. Typically, nobody posts the brands of matches for winch the plate. I made use of a Badland 3500. It also makes me impressed. It's available on Amazon right here. Excellent product that is simple to install.
4.5/5
Two-year limited warranty
For use with all ATV winches from 2000 – 3600 pounds with 4-hole (3.00" x 4.875") or 2-hole (3.10" x 4.875â€) standard mounting pattern*
ATV winch mount for select 2010–2017 Mid-Size Polaris Ranger UTVs. (See fit chart in second image for complete listing.)
3/16†steel construction with tough black powder-coat
Easy installation, comprehensive instructions included
$234
have one issue. I used this extreme max 5600.4348 atv winch mount and installed a Badland 2500 lb cap atv/utv winch. The holes are 5 inches center to center. The mounting holes for the fairhead on the Badland 2500 roller are 4.5 inches apart. Nothing matched except for this. picture of a fairhead advice me, pls.
4.3/5
Winch Mount For 2015-2018 RZR 900&2014-2018 RZR 1000&General
All mounting hardware included Roller fairlead and winch not included
Packing list: 1x winch mount with hardware
Condition: Brand new Color: Black Material: Steel
Feature Constructed of 3/16" steel Mounts winch behind front bumper Powder coated black for supreme durability
$234
I had to drill a few new holes in the plate, as another reviewer mentioned, in order to mount my Badlands 5k lbs winch, but this was not a big deal. It wasn't their fault that I had to change the mount you installed on the machine's front, which clearly states for 14 to 18 RZR. A 2019 1k XP is mine. I used a grinder to trim some plastic from the front when you try to put the plastic front back on because it strikes the bracket. If possible, avoid going down that road by simply cutting away the plastic section that impacts.
4.1/5
Efficient planetary gear and dynamic braking systems
49 ft. super duty aircraft cable with rugged, latched clevis hook
Powerful – 3000 lb. max rated line pull and 1 HP permanent magnet motor
Champion Support - 2 year limited warranty with FREE lifetime technical support
Bonus Accessories – Roller fairlead, mounting channel, handle bar mounted remote control
$234
Well After installing it at last, I think it's okay to good. No solenoid is the first drawback, in my opinion. It made the installation process take 10 minutes, but I truly wish one was included. I hunt and bike in the mud in all weather conditions. A short or battery drain are significant issues. The second negative is that I also saw a significant delay after hitting the button. The fact that it is inconsistent is the most frustrating thing. *TIP* I discovered there is no delay if I press the button exactly in the middle. It occurs when I am closer to the button's sides. Since they are now stiff, I'm hoping that once they're broken in, the problem will go away. The size of the control switch is a bonus for me. Numerous individuals criticize the size. I can understand why; it is obviously four times as large as the image and does not resemble it. However, I adore how big it is. The majority of the time I'll use it will be for my winter plow. Wearing gloves makes the task easier. Also, it's simple to find in the dark. A excellent choice is the free spool. third in terms of price among the well-known brands. Since I just installed, I can't testify to lifespan. If it fails, I will update. I'll be content if I got a few years out of it. Providing it doesn't malfunction during a severe snowstorm.
4.1/5
For use with all ATV winches from 2000 – 3600 pounds with 4-hole (3.00" x 4.875") or 2-hole (3.10" x 4.875â€) standard mounting pattern*
Easy installation, comprehensive instructions included
3/16†steel construction with tough black powder-coat
Will work with all OEM brushguard and double tube bumpers, designed to meet OEM mounting requirements, will work with Glacier Plow; Two-year limited warranty
ATV winch mount for select Polaris Sportsman ATVs (See fit chart in second image for complete listing.)
$234
Well After installing it at last, I think it's okay to good. No solenoid is the first drawback, in my opinion. It made the installation process take 10 minutes, but I truly wish one was included. I hunt and bike in the mud in all weather conditions. A short or battery drain are significant issues. The second negative is that I also saw a significant delay after hitting the button. The fact that it is inconsistent is the most frustrating thing. *TIP* I discovered there is no delay if I press the button exactly in the middle. It occurs when I am closer to the button's sides. Since they are now stiff, I'm hoping that once they're broken in, the problem will go away. The size of the control switch is a bonus for me. Numerous individuals criticize the size. I can understand why; it is obviously four times as large as the image and does not resemble it. However, I adore how big it is. The majority of the time I'll use it will be for my winter plow. Wearing gloves makes the task easier. Also, it's simple to find in the dark. A excellent choice is the free spool. third in terms of price among the well-known brands. Since I just installed, I can't testify to lifespan. If it fails, I will update. I'll be content if I got a few years out of it. Providing it doesn't malfunction during a severe snowstorm.
4.1/5
Durable all-metal construction features black powder-coated finish for corrosion resistance; IP68-rated waterproof sealing keeps the elements out
Includes 50' x 1/4" synthetic rope, hawse fairlead, and zinc-plated hook, as well as a dash-mounted control switch, corded remote control
4,500 lb capacity winch; Perfect for the hardest working UTVs
Load-holding mechanical brake offers great control
Smooth and reliable all-metal three-stage planetary gear train
$234
Had numerous installation problems, but Warn's customer support was very quick to respond.1) A mounting plate for fairleads. I got the Warn mounting hardware specifically for my ATV. Base plate was perfectly inserted. I tried to mount the winch and fairlead mount to the base plate after mounting the fairlead to the fairlead mount (which was provided with the base plate). Nope. The mount holds were 1/4 because of the fairlead mounting bolts "off. Perhaps this was intended for a use other than this specific winch. I had to re-drill the fairlead mount plate, which took an hour. Warn is switching increasingly to single-mounting plates, but this might be problematic for the few ATVs that want separate fairlead plates, according to customer service.2) Bolts for mounting winches. Way too brief. The first one I took off the 1/4-3/8 and torqued down "it made contact with the mounting hole. Fortunately, there was still enough thread for a longer bolt, which I had to quickly purchase from the hardware shop. Again, the twin plate mounting mechanism provided an explanation in this case. The bolt would have worked well for a single plate. In order to determine how long your bolt actually *should* be if you're mounting with a double plate, do yourself a favor and measure through the lock washer, mounting plates, and winch. Then, go buy a bolt that is the proper length. Make sure you purchase the hardened stainless bolt that, other from length, matches the ones that are included.Three) Wiring Too brief! Too long, too! The winch wiring, which is yellow and blue and runs from the winch to the contactor, plays out a foot away from any potential mounting site, even with or aft of the battery compartment, as another commenter pointed out. (And I don't have a monster ATV; I have a medium-sized ATV.) Therefore, the customer service was quite helpful. They inquired about the measurement I required and supplied a free shipping set of blue/yellows that were just a little bit longer.Bottom line: Considering the issues I've encountered thus far, I'm still expecting that this winch will be incredibly good. I must add that Warn's customer service was excellent! The justifications were justifications, not justifications, and they took the necessary action to resolve the issue. I'll change the rating once everything is linked based on how well everything functions.After installation, the promised wires from Warn showed up, were the perfect length, and went in without a hitch. My overly long wires were custom cut to fit properly after I purchased a heavy duty wire cutter and crimper set, a set of end caps, and these items. My son then assisted me in correctly winding/unwinding the cable. The winch is very quiet, and everything functioned as it should.
4.1/5
2,500 lb capacity winch; Great for smaller ATVs
Includes 50' x 3/16" steel rope, roller fairlead, and zinc-plated hook, as well as a handlebar-mounted rocker switch
Smooth and reliable all-metal three-stage planetary gear train
Durable all-metal construction features black powder-coated finish for corrosion resistance; IP68-rated waterproof sealing keeps the elements out
Load-holding mechanical brake offers great control
$234
Had numerous installation problems, but Warn's customer support was very quick to respond.1) A mounting plate for fairleads. I got the Warn mounting hardware specifically for my ATV. Base plate was perfectly inserted. I tried to mount the winch and fairlead mount to the base plate after mounting the fairlead to the fairlead mount (which was provided with the base plate). Nope. The mount holds were 1/4 because of the fairlead mounting bolts "off. Perhaps this was intended for a use other than this specific winch. I had to re-drill the fairlead mount plate, which took an hour. Warn is switching increasingly to single-mounting plates, but this might be problematic for the few ATVs that want separate fairlead plates, according to customer service.2) Bolts for mounting winches. Way too brief. The first one I took off the 1/4-3/8 and torqued down "it made contact with the mounting hole. Fortunately, there was still enough thread for a longer bolt, which I had to quickly purchase from the hardware shop. Again, the twin plate mounting mechanism provided an explanation in this case. The bolt would have worked well for a single plate. In order to determine how long your bolt actually *should* be if you're mounting with a double plate, do yourself a favor and measure through the lock washer, mounting plates, and winch. Then, go buy a bolt that is the proper length. Make sure you purchase the hardened stainless bolt that, other from length, matches the ones that are included.Three) Wiring Too brief! Too long, too! The winch wiring, which is yellow and blue and runs from the winch to the contactor, plays out a foot away from any potential mounting site, even with or aft of the battery compartment, as another commenter pointed out. (And I don't have a monster ATV; I have a medium-sized ATV.) Therefore, the customer service was quite helpful. They inquired about the measurement I required and supplied a free shipping set of blue/yellows that were just a little bit longer.Bottom line: Considering the issues I've encountered thus far, I'm still expecting that this winch will be incredibly good. I must add that Warn's customer service was excellent! The justifications were justifications, not justifications, and they took the necessary action to resolve the issue. I'll change the rating once everything is linked based on how well everything functions.After installation, the promised wires from Warn showed up, were the perfect length, and went in without a hitch. My overly long wires were custom cut to fit properly after I purchased a heavy duty wire cutter and crimper set, a set of end caps, and these items. My son then assisted me in correctly winding/unwinding the cable. The winch is very quiet, and everything functioned as it should.
4.1/5
2,500 lb capacity winch; Great for smaller ATVs
Includes 50' x 3/16" steel rope, roller fairlead, and zinc-plated hook, as well as a handlebar-mounted rocker switch
Smooth and reliable all-metal three-stage planetary gear train
Durable all-metal construction features black powder-coated finish for corrosion resistance; IP68-rated waterproof sealing keeps the elements out
Load-holding mechanical brake offers great control
$234
Had numerous installation problems, but Warn's customer support was very quick to respond.1) A mounting plate for fairleads. I got the Warn mounting hardware specifically for my ATV. Base plate was perfectly inserted. I tried to mount the winch and fairlead mount to the base plate after mounting the fairlead to the fairlead mount (which was provided with the base plate). Nope. The mount holds were 1/4 because of the fairlead mounting bolts "off. Perhaps this was intended for a use other than this specific winch. I had to re-drill the fairlead mount plate, which took an hour. Warn is switching increasingly to single-mounting plates, but this might be problematic for the few ATVs that want separate fairlead plates, according to customer service.2) Bolts for mounting winches. Way too brief. The first one I took off the 1/4-3/8 and torqued down "it made contact with the mounting hole. Fortunately, there was still enough thread for a longer bolt, which I had to quickly purchase from the hardware shop. Again, the twin plate mounting mechanism provided an explanation in this case. The bolt would have worked well for a single plate. In order to determine how long your bolt actually *should* be if you're mounting with a double plate, do yourself a favor and measure through the lock washer, mounting plates, and winch. Then, go buy a bolt that is the proper length. Make sure you purchase the hardened stainless bolt that, other from length, matches the ones that are included.Three) Wiring Too brief! Too long, too! The winch wiring, which is yellow and blue and runs from the winch to the contactor, plays out a foot away from any potential mounting site, even with or aft of the battery compartment, as another commenter pointed out. (And I don't have a monster ATV; I have a medium-sized ATV.) Therefore, the customer service was quite helpful. They inquired about the measurement I required and supplied a free shipping set of blue/yellows that were just a little bit longer.Bottom line: Considering the issues I've encountered thus far, I'm still expecting that this winch will be incredibly good. I must add that Warn's customer service was excellent! The justifications were justifications, not justifications, and they took the necessary action to resolve the issue. I'll change the rating once everything is linked based on how well everything functions.After installation, the promised wires from Warn showed up, were the perfect length, and went in without a hitch. My overly long wires were custom cut to fit properly after I purchased a heavy duty wire cutter and crimper set, a set of end caps, and these items. My son then assisted me in correctly winding/unwinding the cable. The winch is very quiet, and everything functioned as it should.
While all ATV winches may appear to be the same, they are actually not. Different ATV winches have different mounting points. The most common place to mount an ATV winch is on the front bumper. However, some people also like to mount their winches on the back of their ATVs. It really just depends on personal preference.
There are a few ways to make a winch pull more weight. One is to use a double-sheave block, which gives the winch twice the mechanical advantage. Another is to use a snatch block, which allows the winch to pull from a different angle and increases its mechanical advantage. Finally, you can use a winch extension, which gives the winch more length to pull from.
To size a winch for an ATV, you'll need to know the weight of your ATV and the maximum pulling capacity of the winch. The weight of your ATV will determine the amount of line pull the winch needs to be able to provide. The maximum pulling capacity of the winch is the amount of force the winch can safely generate without damaging itself.
A 10000 lb winch can pull up to 10,000 lbs. This is a great option for those who need to tow heavy objects or vehicles.
A 12,000-pound winch can pull about 6 tons, which is the equivalent of 12,000 pounds. This amount of pulling power is great for hauling large loads or for towing vehicles.
A 3000 lb winch can pull about 3,000 lbs of weight.
COPYRIGHT © 2019