Yes, you can put vinegar in your power washer. However, you should only use a 50/50 vinegar and water solution. Vinegar is a great natural cleaner and will not damage your power washer.
No, you cannot use any hose with a pressure washer. The hose must be rated for the specific pressure washer that you are using. If you use a hose that is not rated for your pressure washer, it could burst and cause serious injury.
Yes, you can increase the PSI on a pressure washer. You can do this by adjusting the pressure regulator on the machine.
4.8/5
10.7 ounce bottle can be used with most brands of pressure washers
Uses a unique anti Freeze and lubricant formula
Protects the pistons of Your pressure washer and seals them from damage
Genuine OEM replacement part
For use before extended storage and prior to startup the following season to keep Your pump running on Full blast
$234
ordering once more 10/28/19—— As intended and as a jetter to clean sewer systems, I use my pressure washer all year long. In addition to shielding it against freezing damage, this substance also lubricates the interior parts and inhibits the formation of hard water scale. It is simple to rewinterize as often as necessary thanks to this design.I use 1 can on average per season, with 10 treatments per can. If you disconnect the line and merely purge the pump, you won't need to clear a 100-foot hose. The internals of the pump are evacuated using VERY LITTLE product. This is under pressure and effectively removes water as compared to goods that are pushed in or sucked out of a squeeze bottle. I could be wrong, but it seems like it could combine with water to form a freeze-resistant emulsion.I've used things like this in the past, but this is much easier to use. Some treatments call for you to turn the pump to introduce the product, which is difficult to do while holding a bottle in one hand and turning the key with the other.Nothing was given to me in exchange for my evaluation.I have no connection to any seller or goods.I suggest purchasing this item.
4.6/5
High quality-- our nozzle tips are constructed from high quality stainless steel and brass.
Different spray angle-- you can choose different angles spray nozzle according to the actual needs.
Complete set--1 Black Brass soap nozzle,1 Red Stainless Steel Nozzle Tip (0 Degree),1 Yellow Stainless Steel Nozzle Tip (15 Degree),1 Green Stainless Steel Nozzle Tip (25 Degree),1 White Stainless Steel Nozzle Tip (40 Degree).
Pressure washers rated-- 1/4 inch quick connection design 2.5 GPM, up to 4000 PSI.
Clean easily-- allows you to clean hard-to-reach areas quickly and easily without a ladder.
$234
I looked into both pricey and cheap foam cannons before deciding to try this less expensive one based on Amazon reviews. The reviews were accurate. A GREAT FOAM CANNON, PLEASE! VERY SIMPLE INSTRUCTIONS TO FOLLOW!The foam cannon comes with tips, but that is the only drawback. The male connector for the foam-cannon didn't fit my power washer, but the tips that came with it did, which was a drawback. Something that needs to be resolved by the maker. At the neighborhood hardware store, a male connector for $2.39 fixed that.Additionally, I advise utilizing a gas-powered power washer. I have an electric one, but even without using much soap, the gas-powered one really got the foam cannon to blow suds over my car. The foam cannon was able to remove all the filth without hand washing, saving you $13 every week at a car wash that might have brushes that DAMAGE the outside of your car! UNBELIEVABLE!!As a ride-share driver in Chicago, I was relieved to see that the majority of my coworkers aren't overly concerned with maintaining a spotless vehicle. WTF IS THIS MISTAKE!My tips increased from roughly 4% of my ride-share income to 10%–14% of my income after having my car detailed and having it washed. Passengers are thrilled to see a clean ride-share driver operating a clean vehicle, ESPECIALLY ON THE WEEKENDS when it's typically romantic night. There is nothing worse than spending a fortune at Gibson's on Rush Street in Chicago with your date, only to find out that the automobile you leased through a ride-sharing service hasn't been washed since the Bush administration. Nothing acts as a "Cock-Blocker" like a dirty ride!Bring on the foam cannon! Get it for the sake of being a nice "wing man" to your passenger as he tries to court his date, even if it's not for the sake of your car!
4.5/5
ATTENTION: Please see Image 2 and find the orifice you need based on working pressure and flow rate (GPM). The orifice of these nozzles are 3.0. The working pressure is up to 4000 PSI.
Different spray angle allows you to clean hard-to-reach areas quickly and easily
More Application: Can be attached to a Quick-Connect Wand for swifter application and more
Don't use a ladder to clean or spray water for tree with these spray nozzles
Spray Nozzle Tips set includes: 1 Red Stainless Steel Nozzle Tip (0 Degree), 1 Yellow Stainless Steel Nozzle Tip (15 Degree), 1 Green Stainless Steel Nozzle Tip (25 Degree), 1 White Stainless Steel Nozzle Tip (40 Degree), 1 Brass soap nozzle tip (65 Degree). Choose different angles spray nozzle according to the actual need
$234
The majority of evaluations on this site, I've found, are solely for power washer nozzles. As is well known, Amazon frequently combines product reviews. The nozzles were an added bonus when I got the foam cannon. By the way, they are of the same caliber as the nozzles that were included with my pressure washer. They virtually have the same appearance as if they were all produced by the same company. They are excellent. Someone noted that they deteriorate over time. I have used the nozzles that came with my pressure washer for years with no issues, so I can't fathom how they could ever wear out. Aluminum and brass are not damaged by simple or soapy water. The only explanation I can come up with is that the individual was dealing with a buildup of minerals from hard water. If that's the case, LimeAway, a comparable product, or even vinegar can readily remove it.Anyway, that's enough. I ordered this combination for the foam cannon. I added a few teaspoons of Chemical Guys CWS 110 Honeydew Snow Foam to the jar before adding water until it was about two-thirds full. When I switched it on, holy smoke! Everything I tested it on was coated by the thickest foam. It resembled cake icing. lovely, thick foam I knew right away that this was one tool that I would wonder how I ever managed without it in the past. This will be fantastic for windows, among other things, in addition to my vehicle, SUV, and motorcycle. I put it to the test on our substantial gas barbecue. It performed flawlessly.As I typically do when purchasing things, I checked numerous reviews before placing this order. I don't understand why the foam cannon didn't work for certain folks like the nozzles did. The only explanation I can come up with is that they either used the incorrect foaming agent or didn't modify it properly. The blast was strong and narrow when I first turned it on. The foam was really shot on with a tight stream, yet it rapidly and easily spread. I could then choose between a broad, soft fan of foam and a focused, narrow blast by turning the adjuster.These operate in a very fundamental and basic manner. Simply the venturi principle is used. The cannon itself is highly unlikely to malfunction. By the way, you can tell as you pick up this foam cannon that it is of good quality. The only component that is not solid brass is the jar. There probably isn't much of a practical difference between this and more expensive foam cannons. In fact, I'd be surprised if they weren't practically identical to one another, so there's no reason to spend extra. The saying "you get what you pay for" is untrue. If it were true, there would be no need to comparison shop or check pricing. According to the outdated proverb, if you paid more at one dealership for the same exact car than you did at another, you would receive a better vehicle. Nonsense! I'll use last week as an example: I'm having my truck's transfer case oil changed. The majority of internet retailers charge $49.95 to $59.99 per quart. I visited the most well-known online car parts retailer and purchased the same product for $5.35 per quart. My argument is that just because a foam cannon costs more doesn't necessarily mean it's better. I now have an extra set of nozzles for my power washer, so this one is a terrific deal.Simply buy it!
4.5/5
★1 pc quick coupler socket: 1/4’’ female NPT thread + 1/4’’ quick disconnect socket. Made of brass. 1 pc quick coupler plug: 1/4’’ plug + 1/4’’ male NPT thread. Made of stainless steel.
★This is a set of standard quick connect fittings for pressure washer wand, gun or hose.
★SATISFACTION GUARANTEED: 2 YEARS WARRANTY AND FAST REPLY WITHIN 10 HOURS. Please free to contact us if any questions.
★High replacement couplers provide secure and quick fittings, easy to connect and disconnect. Max. Pressure is up to 5000 PSI.
★Application: Universal quick connectors for pressure washer wand, gun or hose; Quick connect to M MINGLE 7.5-Feet Pressure Washer Extension Wand.
$234
purchased to facilitate easy connection and disconnection of the line from the pressure cleaner and the hose to the spray cannon for simpler job site cleanup and storage. In addition, I coupled the connectors to an extension hose so I could quickly connect as needed.Advantage: Pressure connectors don't leak! Excellent performance and no discernible pressure drop. has an additional rubber o-ring for sealing.Cons: Although the water input line connector leaks very slowly, it doesn't seem to have an impact on the inline water pressure. Would have been a five star rating but for the leak.Tip: To reduce friction when removing connectors during testing and to prolong the life of the o-ring during storage, I put a small amount of plumbers silicone gel to the o-ring.Concerns: I utilize ground or well water, which has in the past led to connector failure due to corrosive or calcifying conditions. These connectors are made so that the stainless steel links to points made of stainless steel and the brass connects to points made of brass. This lessens the possibility of groundwater interactions between metals and minerals. I'm crossing my fingers that the material decisions won't cause me any issues.
4.4/5
✅ã€High Quality】Heavy duty brass, stainless steel and durable HARD COMPOSITE CONSTRUCTION for extended life; for use with Gas/Electric pressure washers up to 4,000 PSI.
✅ã€Professional Surface Cleaner 】Delivers professional level cleaning over an area 15'' wide with two spinning nozzles,Perfect for cleaning large surfaces such as driveways, patios, decks, and sidewalks.
✅ã€High Efficiency】Tough flexible bristles protect work surface and controls over-spray.Cleans up to 5 X FASTER than a standard spray nozzle.Rotation speed(rpm): 1800 rpm
✅ã€24h Customer Service】Online response within 24 hours,if you want to learn more about the power washer attachment,please contact us,the professional team is always ready to serve you.
✅ã€Good Compatibility】Attaches to quick-connect capable wand with ease just like a spray nozzle(1/4'' quick-connect fitting).Package includes 2 * 15'' pressure washer wand with 1/4''plug and 1/4'' quick-connect fitting.
$234
This is by far the best pressure washer surface cleaning we've used. The EDOU 15-inch extension wand attachment is ideal for our 3200 psi pressure washer. It is still in good shape and took much less time than usual to wash our lengthy double driveway. I'm attempting to connect a video, but I'm unsure if it was successful. I've included a picture of one of the walls in our house that my husband recently scrubbed in preparation for painting. Wow, the time saved paid for itself after pressure washing our last property without an attachment took days. Anyone who has a pressure washer should definitely get this; it's well worth the cost. Excellent client service is provided. They sent me a response within a few hours and included their email address with the attachment. They went above and beyond to assist us in realizing that the attachment we purchased was not what we required. They then made the opportunity to return our money so we could buy one that would function with our machine for our needs. Our expectations are surpassed by the new attachment.
4.3/5
The washer hose is M22, if your gun / washer washer is the same size, but can not connect well, please connect them hardly.
M22 Metric Female Fitting on both end
NOTE: IT IS PRESSURE WASHER HOSE, NOT GARDEN HOSE, ONLY SUITABLE FOR PRESSURE WASHER GUN, PRESSURE WASHER. With 12 months product warranty, if you have any questions, please contact us, we would be more than happy to assist.
1/4" Diameter x 25 ft, 3000 PSI working pressure
Can be used as an extension hose with an adaptor
$234
The most frustrating aspect about this product is that it becomes twisted as I go around the car. The substance is more like a budget rubber than a high-end one. The stock SPX hose is superior quality if you're buying this to replace it, but the length of this one makes it useful. We don't need a lot of pressure for a car anyway, but don't use it to remove concrete stains (depending on the pressure washer; I have the SPX 3000 and SPX 3500). I noticeably lose PSI while using this one. It's apparent enough to make me want to use the 20' that came with the pressure washer.
4.3/5
💦 Universal Replacement Hose: MAX 3200 PSI 25 ft Pressure Washer Replacement Hose , Designed for power washer equipment, also be available for electric pressure washers. Fit most brand power washer B&S, Generac, Dewalt, Ryobi, Powerstrok, Craftsman. PLEASE NOTE: Additonal adapter/connector is required for fitting with some electric pressure washer especially Sun Joe, AR, Ryobi ( 14/15 conversion adapters ASIN: B07L4NV94B and B07L4LNWS7. )
💦 Anti-kink: New developed material to prevent kind when you wash for extra distace requirement, easy management and roll up.
💦 Super Wear Resistance: Using high strength pure material, prolonged service life, weather and abrasion resistant. The best replacement and extension pressure washer hose for an enthusiast or commercial use to wash Car, Motorcycle, Floors, Windows, Driveways, Roofs, Siding and so on.
💦 Higher Performance: The highest pressure of thermoplastic hose with braid layer support professional high pressure working, for residential and light commercial washing Car, Motorcycle, Floors, Windows, Driveways, Roofs, Siding and so on. ðŸ’ã€100% service support and technical support】ðŸ’
💦 Durable Brass Connectors: American Standard M22-14mm adapter is made from SOLID BRASS, much thicker and heavier, can be firmly connected with your Pressure Washer and Pressure Washer gun, don’t shake or damaged easily and no leaking. DOUBLE DURABLE!
$234
This hose is a good option in this pricing range. For more than three months, I have used it frequently. It should be mentioned that the hose is adaptable and simple to use in warm environments. The hose stiffens up in cold weather (below 50 F). In my situation, the hose reportedly became overbent accidently, which led to a failure. Yamatic's management addressed the issue, fixed it, and provided me a new hose and an additional product to try (but haven't yet). I was just a little outside of Amazon's 3-month warranty, but it only took a few emails for them to take care of it. Although I am aware that hoses that remain flexible at low temperatures are highly expensive, this hose performs admirably in all other regards. Its connectors fit snugly, and it is simple to connect and disconnect. An excellent value overall.
4.3/5
1/4" QD + 1/4" female
For high pressure connections are assembled and disassembled
Ball lock design ensures a solid connection
Ideal tool for quick exchange of nozzles and spray guns
Made of premium quality brass, durable, provides secure and quick fittings, set of 2
$234
Although I am aware that not all pressure washers and wands are created equal, I believe the Ki gas powered 3000. PS is common. M22 threads are available for the washer Outpost. That's a man. The input on my wand likewise has M22 threads. On Wednesday, I bought a brand-new, heavy-duty 3/8 x 50' ow hose; regrettably, it has a 3/8s fast disconnect. A female end and a masculine E end As a result, the kit includes two male 3/8x M-22 connectors, which are fine if I can remove the male connector from the hose. I used a 2. Breaker and a piece of pipe while holding that in a vice. It appears as though you can see the beginning of threads. But I believe it to be an all-forged fitting. Although the hose is excellent, I find it silly and tacky that the fittings cannot be removed. As a result, I was able to purchase a component for $9 that features a female 3/8 on one side and a female M22 on the other. This component should be included in order to make this kit global. Since I still have my 25, 1/4" hose, I also believe that I should have the option of attaching it. On each end, there is a female M22.All of the parts, in my opinion, are of mild duty. Although they are reasonably priced, they won't last forever. But because I'm retired and on a tight salary, I'd buy more if they were in good working order.You will therefore need an additional adapter if your hose has non-removable quick disconnects and your washer and wand both have M22 threads. I'll try to provide the Amazon link for that here.High-pressure washer gun and hose EDOU 3/8" Quick Connect NPT to M22 14mm Metric Fitting, 5000 PSI (https://www.amazon.com/dp/B07PQ1V8N8/ref=cm sw r cp tai zm3ODbNHZB6JQ)Click the aforementioned link. Additional 8.99, but without it I'd be returning everything.
4.1/5
💦ã€Top Performance】Industry benchmark with performance Max 3200 PSI / Burst 8700PSI, desgined for high performance gas power washer up to 3200PSI equipped with 4hp to 8hp gas engine. Also perfect and durable for lower pressure electric pressure washers.
💦ã€Health & Warranty】Compling with critical RoHS 2.0 standard and using recycle material, to protect you health and our earth clean. One year limited warranty for your safe using.
💦ã€Durability】With innovation high technology material and process management, new upgraded strongthen and wear resistance, this perfect replacement and extension pressure washer hose will provide more longer life time and safe using for your home and commercial use to wash Car, Motorcycle, Floors, Windows, Driveways, Roofs, Pool, Siding and so on.
💦ã€Upgrade Replacement & Extension Hose】50 ft X 1/4inch, MAX 3200 PSI. Fit most brand power washer Craftsman, Honda, B&S, Generac, Ryobi, Powerstrok, Simpson,Dewalt. PLEASE NOTE: Need extra 14/15 fitting for Sun Joe (ASIN: B07L4NV94B or B07L4LNWS7)
💦ã€Kink Resistant】Premium high quality material hose merge with unique high-tech manufacturing process, to provide you with EASY carry, drag and roll up. Non marking and Never kink permanately.
$234
Although the 25-foot hose that came with my Generac 3100 PSI power washer functions perfectly, it is simply too short to maneuver the foam cannon and sprayer around the car. This 50-foot hose appears to function perfectly and to share many traits with the original, despite being 25 feet longer. The hose is handled similarly; you do need to be careful while pulling it around, but thus far I haven't noticed any problems.The hose's fittings, which are crimped on like most others I've seen, are nothing exceptional. The couplings are loose and the ends are crimped, but I had no trouble threading them into place. I read a lot of reviews before selecting this one because of its price. I researched reviews for numerous far more expensive hoses, and the majority of them all had some form of problem. Many of these problems, in my opinion, can result from human or manufacturing error.With my purchase, I'm pleased. We'll see how it holds up to use and deterioration over time.09/11/2019 update I've now used this hose seven or eight times without any problems. Maybe I just got one of the better ones, or maybe everyone has their own problems. No kinking or scuffing, no problems threading for a strong seal. Notes: Since my driveway is asphalt, any scuffing wouldn't be visible. This hose is quite rigid, but the previous was as well. Simply be mindful of how you handle the hose and avoid allowing it to tangle with anything, and you should be fine. When I clean the siding and deck before winter, I think my next step will be to obtain a connector to lengthen out to the 75-foot range using my original hose.
4/5
Biodegradable. Made in the USA
The Archer promise: cleaner. Quicker
Highly concentrated, makes up to 20 gallons of ready to use detergent from one gallon of concentrate
Perfect for cleaning outdoor surfaces such as decks, driveways, sidewalks, stone, brick and more
Archer detergents are specially formulated to work in tandem with your pressure washer to help you clean more quickly and thoroughly
$234
To go along with our Kartcher unit, which has a soap dispenser bottle, I purchased this pressure washer car wash and wax soap. I use this to remove severe road filth from the paint after driving in the rain. It's a very high-quality car cleaner that also leaves a light surface wax after usage. I often spray rinse first, then apply the soap on low and let it set for a few seconds before using full power rinse once more and towel drying. It's so good that you seldom ever need to scrape unless your car is really unclean. Quite expensive, but excellent for cleaning any kind of automobile, truck, RV, or boat. For optimal results, a pressure washer with a soap dispenser is required. Soap shouldn't be let to dry in the sun as it will stain.
If you have a pressure washer, you know that they are great for cleaning driveways, sidewalks, and siding. But, you may have noticed that your pressure washer seems to have lost some of its power over time. This is not uncommon and there are several reasons why this may happen. One reason pressure washers lose pressure over time is because the pump may be wearing out. This is the part of the pressure washer that increases the water pressure. As the pump wears out, it is not able to increase the water pressure as much, resulting in a loss
Assuming you're asking how long a pressure washer will last before it needs to be replaced, the answer is it depends. Pressure washers can last anywhere from 2 to 5 years before they need to be replaced. However, this also depends on how often you use the pressure washer and how well you maintain it.
To clean concrete, you will need at least 3,000 PSI. This pressure will remove most stains and dirt from the surface.
A turbo nozzle is a great investment for anyone who wants to get the most out of their pressure washer. With a turbo nozzle, you can increase the pressure of your washer by up to 50%. This can be a great way to get more power when you need it, such as when you are cleaning tough stains or heavy duty equipment.
There are different pressure washer nozzles for different purposes. For example, there are nozzles for general cleaning, for specific areas, for different types of surfaces, and for different types of materials. There are also different nozzles for different pressure levels.
COPYRIGHT © 2019