5/5
The foot rest with complete screw and spare parts,Easy to install,Mount with all your stock hardware, the foot rest provide more grip than the stock pegs
Quality product with hassle-free warranty offered by Issyauto. Please contact us for a quick response if you have any issues
The YZ 125 foot pegs is skidproof which will hold your boots well from slipping
Foot peg fits Yamaha YZ125 1997-2017, YZ250 1998-1999, YZ65 2018, YZ85 2002-2019, YZ250F 2001-2019, YZ426F 2000-2002, YZ450F 2003-2019, YZ125X 2017-2019, YZ250X 2016-2019,YZ450FX 2016-2019,WR250F 2001-2018,WR400F 1999-2000,WR426F 2001-2002,WR450F 2003-2018, YZ250FX 2015-2019
The pedal with a large area and can provide safe and reliable support; The foot rest are huge and comfortable and grip well; the foot pegs with 19 small spikes; the spikes will grip your boots like they're in stirrups
$234
I had to re-use my pins because the ones they sent were about a third of an inch too short to fit my 1998 YZ250.
4.6/5
Quality constructed with durable aluminum and premium gloss black finish; EPDM rubber inserts offer traction and vibration dampening
Gain 360 degrees of adjustability
Easy to install and includes (1) Left Longhorn Offset /1 1/4" Magnum Quick Clamp/Trident dually Peg, (1) Right Longhorn Offset /1 1/4" Magnum Quick Clamp/Triden dually Peg; Suggestesd tools for installation (not included): set of hex wrenches, set of combination wrenches, or socket set and ratchet
Features 3 1/4" arms that provide up to 6 1/2" of adjustment; Magnum Quick Clamps allow engine guard application
Multi-fit for 1 1/4" engine guards or tubing
$234
Highway pegs turn out to be a darn hard choice! I considered a lot of options before choosing these. They feel quite strong under my feet and lock down really securely (just don't over-torque!). These are fantastic in that they are adjustable, which is their main selling point, but it does take some patience to put them up just how you want. It took me some time, but I managed to do it alone. Another thing to think about is how they appear and how hefty they are. They unquestionably function for a large cruiser like my Indian, but they unquestionably do not make the bike smaller. Overall though, they really do look excellent on an Indian Chief, I'm sure they look well on Harley's too. ;) They add about an inch of width to the bike, which is one more inch to worry about while splitting lanes in CA, but hey...it is what it is. They are undoubtedly nicely constructed, and I don't anticipate any problems with floppiness or slippage thanks to the teeth on the crucial joints that allow them to lock down firmly beneath your feet. 4.5 stars. If they were created so that they did not widen the bike when folded, I would give them a five-star rating. The Lindby highway pegs were the more stylish option I was considering; they mount and fold up so that they are placed behind the highway bar rather than to the side, which adds no width and makes them very low profile, but I read way too many reviews that said they were generally terrible, that they easily strip out the mounting threads, indicating cheap tin (as confirmed by someone on an Indian forum I spoke with), and that the peg flops down unless over-torqued or modified with wa I'm content.
4.3/5
360° Roating: Footpegs can be rotated 360 degree to any angle and then locked down, you can find the most comfortable angle for your position
Fitments: Fits Most Harley Davidson models with male mount-style foot peg support. Fits models in passenger and highway peg positions
Durable and Light Weight: The foot pedals made of 7075-T6 Aluminum, one of the highest strenght alloys, can afford over 600KG pressure
Anti Slip: Removeable and replaceable sharp teeth made from hardened steel resist wear. It supply uniform and stable grip on your shoes during riding
Size: The foot pegs base is 57mm wide and 88mm length. (Width: 2 1/4 inches, Length: 3 1/2 inches). Extra wide platform delivers solid footing for improved bike control
$234
They are fantastic. I purchased 1 pair to serve as my 2007 street bob's passenger pegs. They are really high caliber. The OEM bolts for the pegs easily slid through the bolt holes. the holes didn't need to be drilled out, as some reviewers claimed. Just placed two additional pairs on order. I believe these are the identical pegs that other people are selling for $80 .
4.2/5
★Made From Forged T7 7075 Aluminum, One Of The Highest Strenght Alloys.
★Reinforced Teeth Supply Uniform And Stable Grip On Your Shoes During Riding.
★Fitment:SUZUKI RM125 RM250 RM250Z RMX250 DR-Z400 DR-Z400E DR-Z400S DR-Z400SM KAWASAKI KLX400R Motorcycle
★New Fishbone Plate Design,Beautiful And Durable
★Sharp Teeth Can Be Removeable And Replaceabl
$234
Fit and quality are satisfactory. They are excellent for the price. They are lower than stock, which is the only reason I gave them 4 instead of 5 stars. Not in the summary. After installation, I had to reposition my shifter and brake pedal. I may scrape more easily when running Super Moto because I'm 5'11", but I can appreciate a bit extra flexibility in my legs.
4/5
Package includes:1 Pair of Front Foot Pegs.
Construction:Designed to fit in Stock Lower Door Hinge Pin,no extra drilling required (You may need a wrench to remove your doors).7 Strips anti-skid Hollow Design keeps your feet from slipping off Pegs.Especially in muddy and wet condition.There is protective pad attached at the side of foot pegs,which will not cause damage to door hinge.
Fitment:Jeep Wrangler JK 2DR JKU 4DR 2007-2017(without doors).(Notice:Tight nuts to fix foot pegs on certain position)
Size:Approx 10mm thread diameter placement on vehicle Front Driver and Passenger side.
Material:Black Powder Coated Solid Steel Construction.Can be effective anti-corrosion and anti-oxidation.Two screw nuts are made of stainless steel and iron.One-piece Fully Welded.
$234
Concerning the car's maintenance, I have serious concerns. However, this gasket's pegs-edge design is really sensible. high caliber and guard against scratching my Jeep. My concerns are entirely put to rest by this.My excursions are more enjoyable when I relax by sitting in the driver's seat and putting my foot on the pegs.These are a need if you have a Jeep without doors!
4/5
easy install , no Installation guide
Engine Guard Footpeg Mounting Kit For Harley Davidson , Ball milled for custom look
Color : Black
Replaces OEM 50957-02B
Condition : 100% Brand New , Aluminum material
$234
decent but... Not fantastic, I'm afraid. Should have an interior gasket to properly hold the metal. It holds my footpads flawlessly and fits perfectly on my official Harley moustache guard, but I had to tighten this mounting component much more than was necessary. Before I could get it just perfect, it moved on me numerous times as I was riding (meaning not moving.rotating when I rested my feet on them.)
3.8/5
Radracing 1" to 1.25"(1 1/4") motorcycle anti-vibrate engine guard foot pegs clamps kit fit for Harley-Davidson and other models with 1" to 1-1/4" front engine guards(tubes).
These footpegs mount kit apply to driver side foot peg,highway foot peg,replace the stock foot pegs with a comfortable and stylish designs.
Before placing an order,please make sure our product fits your model.If you have any question,please don't hesitate to contact us.We will try our best to help you handle the problem as soon as possible.
All of the footpeg mount kit at the factory using the highest level of billet aluminum alloy,take rider comfort to the next level.These offset highway footpeg kits allow the rider a wide range of adjustment to accommodate nearly every shape and size.
The package comes with one set 1" to 1-1/4" front engine guards and necessary mounting allen wrench.Mounting clamp firmly grips the engine guard,easy to install and instructions is not included.
$234
Even though my crash bars are the size that these should be easy to mount, I had trouble getting them to fit properly since they were a little trickier to install than I had anticipated. I installed them after some time and some tweaks, and I'm pretty pleased with them. They are quite well manufactured and of great quality, so there is no need to spend hundreds of dollars on pricey highway pegs when these will serve the same purpose.
3.7/5
Fits for Road Glide Electra Glide Road King Street Glide Sportster Softail Dyna with 1 1.25" (32mm) Engine Guard Bar
Size: Length-4 21/64" (11cm) Width-2 11/64" (5.5cm). Mounting Diameter-1 1/4 "(32mm)
For any problems with the product, please feel free to email us by Amazon. We offer the lifetime warranty.
Material: Heavy Duty Metal + Rubber
Package Includes: 1 Pair of Engine Guard Highway Foot peg (Left & Right) + Set of Allen Wrench
$234
These were placed on the 2019 Street Glide, and they look great and fit well. To keep the Allen bolts tight after installation, add a little amount of blue lock tight (I did have trouble with them coming loose). They were missing instructions, which initially made them seem problematic, but once the issue was resolved, they looked good. I think the HD versions are slightly higher resolution, but they cost three times as much, so I'm OK with these. Greetings and safe travels.
3.5/5
$234
I installed them on my 2005 Road King, which has a Willy G. Skull theme and would have cost 119 dollars for the pegs and 84 dollars for the pads if purchased through Harley-Davidson. I believe that 44.95 plus 3 day free rapid shipping is a good deal. The pad is so similar to the Harley-Davidson pegs that you would not be able to tell the difference. Excellent Deal!!!! I hope you can click to enlarge the image. Great for riders with short or long legs I am 6'2" . These can be changed whatever you see fit. Excellent purchase. I firmly advise using this item.
COPYRIGHT © 2019