No, all grill igniters are not the same. Different grills use different types of igniters, and each type has its own advantages and disadvantages. The most common type of igniter is the battery-operated igniter, which is easy to use but can be less reliable than other types. Other popular types of igniters include manual igniters, which are more reliable but require more effort to use, and natural gas igniters, which are the most reliable but also the most expensive.
Yes, you can clean a spark igniter. You will need to disassemble the igniter and clean the electrode with a wire brush.
Yes, you can manually light a propane grill. First, make sure that the grill is turned off and that the propane tank is turned on. Next, open the grill's lid and locate the burner control knobs. Find the knob for the burner that you want to light and turn it to the "on" position. Then, use a long match or a barbecue lighter to light the burner at the base. Once the burner is lit, adjust the knob to your desired heat level.
Most grill igniters have a battery. The battery provides the spark that lights the grill. The battery may be located in the igniter itself or in a separate compartment.
5/5
Applicable Gas: LPG, NG Temperature-resistance: -20°C~120°C
No battery just press, one press one spark.
Sparking distance: 2-3mm
Length: 9cm Diameter: 2.6cm
Output voltage: >=18kv Pressure: 3.0±0.5kg
$234
To replace the igniter in my gas fireplace, I ordered this. Two lock nuts and two igniters were included. 30 second install, returning to my fireplace-side seat.As simple to install as 1,2,3.1. Hook the igniter after pulling the wire through the opening.2. Insert the igniter into the hole and tighten the lock screw on the back.3. Press the igniter when the pilot is on.
4.8/5
Electronic ignition
Reignite an old grill
This item is not compatible with Genesis II series grills.
Fits Genesis 330 grill
$234
This wasn't a complete kit because, as other reviewers have noted, it didn't include wiring or instructions. Additionally, my grill's igniter is located on the left side of the front panel, and according to some online ideas, you must completely disassemble the grill in order to replace it.I only required the actual device, though. The current wires worked just fine. The old igniter was easily removed after I removed the thin metal panel that runs beneath the igniter and the different gas control knobs (this involved removing two screws and then sliding out the panel). Color-coded wires should be disconnected from the old igniter and connected to the new one. It took a second attempt to enter the battery before it was successful since I wasn't sure which way the battery went (instructions would be helpful!). Overall, it only took 10 minutes to complete (although it took some time to line up and put the panel back in), and it was simple even without instructions. However, I'm deducting a star because there were no instructions and no promised (but unnecessary) cables.
4.8/5
Easy to install
Battery included
The weber igniter kit is a replacement part for your weber grill
Fits spirit 210 and 310 gas grills (with front-mounted control panels)
For ensuring an instant start every time
$234
The directions supplied, I sensed from reading other comments, are overkill, and I discovered that those remarks were 100% accurate, at least in regards to my grill, the Spirit 210.I looked at a few YouTube tutorials, but none of them were about the 210, so I chose to do it on my own and discovered that it was quite simple. You are mounting three pieces of gear, as follows: the cord and button for the igniter, the igniter itself and its cable, and the black box containing the battery, in that order.Here is how I installed the kit:1. I removed both gas knobs. It then exposed two screws.2. I undid the two screws that I discovered in action 1 by doing so. Now completely unfastened was the front plate/cover as a whole.3. I set the front plate/cover aside after removing the old igniter button from the back of it.4. I depressed the top hinge pin on the door and removed it to make my life simpler (this is optional).5. I disconnected the two black wires that connected the old igniter button to the old black box.6. I unplugged the old igniter, which was connected to the old black box by two colored wires.7. I removed the two screws that held the old black box in place. (I removed the screws from the grill's exterior.)8. Now that the plate/cover has been removed, you can see that the igniter is positioned on top of the left burner tube. To remove the igniter, pull it toward you. (Mine needed some work because it was a little stuck.)9. To install the new components, I reversed the procedure.I clicked the button after installing the new battery, and as expected, I heard it click or spark.I hope this is useful.
4.7/5
Fits Weber Spirit Genesis (pre-2002), Platinum I and II, Genesis 1000 to 5500, Genesis Silver and Gold (pre-2002), and Genesis Platinum
Genuine Weber replacement part
Push-button igniter; gas-catcher ignition chamber; includes wiring, hardware, and instructions
Replacement igniter kit for Weber gas grills
$234
I purchased an older Weber Summit 450 that I guess was produced between 1997 and 2001 (the serial number is no longer visible on the label, so I'm relying on images from vintage owner's manuals I found online). Over the past 20 or so years, the grill has held up reasonably well, but the crossover burner tubes and the igniters needed to be replaced because they were entirely destroyed. The Summit grills from this era never sold nearly as well as the less expensive Genesis and Spirit grills, thus information and replacement parts are a little harder to come by. Weber typically stands behind their products and sells replacement parts.While some sources indicated that these igniters would fit, the Weber literature would not explicitly state that they would. As a result, I had to take a bit of a gamble with them.The good news is that they do, in fact, fit wonderfully and without adjustment. And as one would anticipate from a Weber product, the quality is excellent. excellent installation guidelines as well. I intend to use these for 10–20 years.Interestingly, I also located the crossover burner tubes for around $20, so all in all, I paid less than $50 to repair the damage this well-built grill had sustained over the course of two decades. One must adore Weber!
4.6/5
GasSaf(2 Outlet) Universal Spark generator BBQ Gas Grill Replacement 2 Outlet "AAA" Battery Push Button Igniter (Battery not included). Replacement for BROIL KING 1992 & after：9211-54,9211-57,9215-54,9215-57,934664,934667,9453-64,9453-64C,9453-67,9453-67C,9455-84,945584,945587,94644,94647,94944,94947,94994,94997,9561-54,9561-57,9565-54,9565-57,9615-54,9615-57，9865-54,9865-57,9865-74，9865-77,9867-74,9867-77,9869-54,9869-54ED,9869-57,9869-57,9869-74C,9869-74ED,9869-77C,9869-77ED
Replacement for BROIL-MATE：115784,115787,1161-54,1161-57，1165-54,1165-57,1551-64,155164,1553-64,1553-67,195564,195567,1961-54,1961-57,1965-54,1965-57,7020-54,735269,786189.BBQ PRO：146.23676310.DYNA-GLO：DGB730SNB-D,M365GMDG14,M365GMDG14-D. FIESTA：EZT40050. MEMBERS MARK：B10PG20-2C,B10PG20-2R. NEXGRILL：720-0193,720-0289,720-0432,720-0439,720-0522,720-0522CAN,720-0536,720-0578,720-0617.THERMOS：461442114. STERLING：4155-64，4155-67,4451-64,445164，4965-54L,4965-57，496554，5020-54
Replacement for KENMORE：146.10016510,146.16142210，146.16142210,146.16197210，146.16198210,146.16222010，146.23680310,146.34461410，146.34611410，16505，415.16106210,415.16107110，415.16112010，415.16200010，415.16505900，415.90111110，640-03982839-7，640-05057375-7，640-064463383，640-08686032-7，640-175289115,D02M90225，720-0193. JACKSON：JPG700，JPG700BI,JPG700BI-2,JPG850BI,Premier 700,Premier 700BI,Premier 850BI
Replacement for CHARBROIL：415.16112010,415.16200010，415.16505900,461442114,463211511,463211512,463211513,463211514,463240904,463343015,463344015，463411512，463411712，463411911，463440109，463440109B，463441412，463441512，463441513，463441514，463622512，463622513，463622514，463622515，463622713,463631410，463631411,463650413，463723110,640-01303702-3，640-013037064,C-22G1CB,C-45G3CB，C-45G4CB. HUNTINGTON：6020-54,6020-57,6561-54,6561-57. MASTER FORGE：MFA350BNP，MFA350CNP
Also Replacement for BROIL KING 1992 & after：9877-14,9877-17,9877-34,9877-37,987734,987737,987754,987757,987774,987777,9878-14,9878-17,9887-14,9887-17,988714,988717,988734 ,988737,9888-14,9888-17,9956-64,9956-67,9959-64,9959-67,Baron 320,Baron 320S,Crown 40,Crown 40C,Crown 90,Monarch 40,Regal 420,Regal 420 Pro,Signet 20,Signet 20B,Signet 70B,Sovereign 20,Sovereign XL70,Sovereign XLS20.PERFECT FLAME：3019L,3019LNG,720-0522,720-0522CAN,730-0522
$234
Although it wasn't immediately obvious that it was the ideal replacement for my previous one, it was just what I required. I just sort of sized it up ("...looks about one inch here, and about the proper size here...") and decided it was the right one for my Charbroil Classic gas two burner without any specs to go on. Moreover, even if it wasn't, it was close enough. Arrived two days earlier than expected and was identical to my previous one. It was a fantastic fit. was simple to install, and I was gas cooking in no time. Friends of mine who had a poor spark generator for their barbecue lasted years without changing it or even bought a brand-new grill. Do not be alarmed; at most, it will take two minutes and a pair of pliers to get the job done.
4.6/5
No Assembly Required
Replacement Button For All Char-Broil Surefire Ignition Systems
Char-Broil Designed
Easy To Install
$234
Our Char-broil starter wasn't clicking anymore, but you could still get it to function by pressing it 'just right. However, it started to annoy me, so I gave it a shot. It took some trial and error to replace the perfect part, but the finished result is like new. The provided instructions are simple to follow, but as other commenters have noted, accessing the lock nut on the back is challenging. I used several pairs of pliers and vise grips, but I couldn't achieve the grip I required to loosen it. Even removed a few bolts from the side to attempt to pull the front plate out more so I could fit better. Most of the time, I was merely removing layers of flesh from my fingertips. But then it dawned on me: everything, even the original lock nut, is made of plastic. Furthermore, none of it needs to be used again. In order to break the button, I used my vise grips to squeeze it ferociously from the front (side to side). It was then very simple to unscrew what was still in place and create the replacement. A profusion on the back of the button assembly that secures it into the metal plate allowed my fingers to screw the new nut on securely. I messed around for almost 20 minutes attempting to do it delicately, but only one of us succeeded. After only two minutes of wire connection, the familiar click-click-click sound returned.
4.5/5
Fit for Char Broil Models:463251512 463268606 463436213 463436214 463436215 463436413 463439915 463441312 463461613 463461614 464323113 464323313
Universal Spark generator BBQ Gas Grill Replacement 2 Outlet "AA" Battery Push Button Ignitor (Battery not include). 7/8"diameter mounting hole. CSA Certified, Durable and Lasts Longer
NEW TACT PUSH BUTTON SWITCH IGNITOR DESIGN FOR GRILLS - chrome coated make your grill looks appropriate, work better, easy to install, 1.5 volt "AA" Battery required(Battery not include)
Fits brands: Academy Sports, Bass Pro Shops, Brinkmann, Broil-Mate, Broilmaster, Centro, Charbroil, Freedom, Grand Hall, Kenmore, Kmart, Member's Mark, North American Outdoors, Patio Chef, Sams, The Source, Thermos
Fit for Kenmore models:141.15337 141.153371 141.153372 141.153373 141.155400 141.155401 141.15640 141.15790 141.157901 141.157902 141.16221 141.16690 141.166901 141.16691 141.17337 141.173371 141.173372 141.173373 141.17690 141.176901 141.17691 415.23666310 415.23667310 416.16537900
$234
I don't think you can do better for the money. I bought this as a replacement because my old ignitor split in half. I can't fit this particular head in the manufacturer spot because it is larger than the diameter of the original on my grill, but other than that, it works perfectly. I don't mind saving $20 because the OEM replacement for my Kenmore gal was close to $30.Make a note of whether your spark ignitor has one, two, or three wires since you'll need to get the right replacement part with that many wires. In cases where you need two grills, this type is ideal. I sincerely hope that you found my review to be useful; if so, do select "yes" below. Thanks!
4.5/5
Universal Spark generator BBQ Gas Grill Replacement 1 Outlet "AAA" Battery Push Button Ignitor (Battery not include). 3/4" diameter mounting hole. CSA Certified, Durable and Lasts Longer.
Fits Sterling Models: 1155-54STERLING , 1155-57STERLING , 4155-54 , 4155-57 , 415557 , 416554 , 4451-54R , 4451-64 , 4451-74 , 4551-54S , 4551-57S , 4551-64S , 4551-67S , 4551-74 , 455174 , 455174R.
Fits Silver Chef Models: 4551-54R , 4551-74R , 4551-77R. Fits BBQTEK Models: GPF2414AE , GPF2424AE, Broil King : 9959-74.
Make sure you measure the size and check the shape of your original parts and compare with ours BEFORE you order.
Fits Broil King:946-24,946-27,946-28,946-78,948-14B,948-14S,948-17B,948-17S,949-24,949-24S,949-27,949-27S,949-74,949-77,9006-54,9346-54,9346-57,9346-74,9346-77,9453-54,9453-57,9571-44,9571-47,9576-44,9576-47,9576-84NZ,9776-44,9776-47,9776-84,9776-87,9955-74,9955-77,9956-54B,9956-57B,9956-64,9956-67,9959-54,9959-57,9959-74,9959-77,9976-44,9976-47.Fits Broil-Mate Models: 1155-54 , 1155-57 , 1551-54 , 1551-64 , 1551-74 , 1559-54 , 1651-54 , 1955-54 , 1955-57.
$234
For $40, I purchased a used Jenn-Air 304 stainless grill, but it featured the outdated "twist knob to ignite" design with two electrodes. I removed the old twist igniter and replaced it with this after replacing the electrodes. What a distinction. Observations I have made include the following:Butyl rubber, which should last a lot longer than traditional "tire/innertube" rubber, is what I believe to be the rubber used in buttons.My old grill used to spark at a rate of about one per second; new one "rapidfires" 5-8 times per second.Easy installation => This item should fit into any grill that has a single hole for an electric pushbutton, rotation igniter, or "manual push (clicker)" ignition.Important: I STRONGLY advise that you purchase a spark generator with the same amount of wires as your current wires. If your grill only requires 2 wire leads and you were to use a 4-outlet igniter... IT MAY WORK, but the unused lead jacks will ground to the chassis or to each other; in that case, you must insulate them with electrical tape or small amounts of silicone.
4.4/5
Fits Silver Chef Models: 4551-54R , 4551-74R , 4551-77R. Fits BBQTEK Models: GPF2414AE , GPF2424AE, Broil King : 9959-74.
Universal Spark generator BBQ Gas Grill Replacement 1 Outlet "AAA" Battery Push Button Ignitor (Battery not include). 3/4" diameter mounting hole. CSA Certified, Durable and Lasts Longer.
Fits Broil King:946-24,946-27,946-28,946-78,948-14B,948-14S,948-17B,948-17S,949-24,949-24S,949-27,949-27S,949-74,949-77,9006-54,9346-54,9346-57,9346-74,9346-77,9453-54,9453-57,9571-44,9571-47,9576-44,9576-47,9576-84NZ,9776-44,9776-47,9776-84,9776-87,9955-74,9955-77,9956-54B,9956-57B,9956-64,9956-67,9959-54,9959-57,9959-74,9959-77,9976-44,9976-47.Fits Broil-Mate Models: 1155-54 , 1155-57 , 1551-54 , 1551-64 , 1551-74 , 1559-54 , 1651-54 , 1955-54 , 1955-57.
Fits Sterling Models: 1155-54STERLING , 1155-57STERLING , 4155-54 , 4155-57 , 415557 , 416554 , 4451-54R , 4451-64 , 4451-74 , 4551-54S , 4551-57S , 4551-64S , 4551-67S , 4551-74 , 455174 , 455174R.
Make sure you measure the size and check the shape of your original parts and compare with ours BEFORE you order.
$234
modified an older push-button generator. Works better since there are many fast sparks than just one and the spark appears to be stronger. I also purchased a "Neiko 10189A Titanium Step Drill Bit, High Speed Steel | 7/16" to 1-1/8" | Total 12 Step Sizes" to enlarge the grill's original hole because it needs a 7/8" hole.The one thing I'm not sure about is whether all four connection pins can carry current. There aren't any form of instructions provided. When you press the button, arcs between the two pins appear to leap as if they are a matched set, with one pin being positive and the other being ground. I attached a wire grounded to the grill to the second matching pin and the burner electrode wire to the first pin to make it work. The extra two pins were unnecessary.
4.2/5
Replaces most electronic ignition modules
Compatible with Char-Broil Surefire ignition systems and most other electronic ignitions
Works on grills with up to 4 main burners plus a side burner
$234
My Commercial Series 4 burner fits it well.which brings me to my one gripe. With the provided instructions, a 5 burner (or a 4 burner with a side burner) works just well. Make careful you connect two of the wires to each side of the igniter port if your stove has four burners. The module has two ports on one side and three ports on the other; in order for both of the two ports to function, the side with two wires must be attached.I deduct a star from Char Broil for omitting this from their instructions because, in my opinion, it is very clear that they intended for it to work that way. With the exception of that minor issue, which extended a 3 minute installation to a 10 minute one, it functions well and is reasonably priced.Additionally, it was irrelevant for my particular model grill because this item only comes with the module, the plastic nut, two caps (one for models with remote buttons and one for models without), and a little jumper wire. It does NOT come with the wires that are shown in the image.
If your Weber grill's ignitor is broken, you'll need to light it with a match or a lighter. First, remove the grates and the flavorizer bars from your grill. Then, open the lid and locate the burner controls. Turn all the burners to the "High" setting and wait for about 15 minutes. After 15 minutes, turn off the burners and close the lid. Now, open the lid and use a match or a lighter to light the burner on the far left. Once that burner is lit, turn on the other burners. You should now
If your grill igniter isn't working, you'll need to replace it. The cost of a grill igniter replacement will depend on the type of grill you have and where you purchase the replacement igniter. Expect to spend between $20 and $100 on a new igniter.
One reason your grill igniter may have stopped working is because the batteries need to be replaced. If you have determined that the batteries are not the problem, then it is most likely a problem with the igniter itself. The good news is that igniters are relatively inexpensive and easy to replace.
If your grill igniter keeps clicking, it could be because the batteries need to be replaced. Alternatively, there could be an issue with the igniter coil, in which case you'll need to replace it. Finally, make sure that there's no debris blocking the gas flow to the igniter, as this can also prevent it from igniting.
If your gas grill is not clicking, it is most likely due to a problem with the igniter. The igniter is responsible for creating the spark that ignites the gas in the grill. If the igniter is not working, the gas will not be ignited and your grill will not work. There are a few things that you can do to try to fix the problem. First, check the batteries in the igniter. If the batteries are dead, replace them. Next, check to see if the igniter is clogged. If it is, clean it with a wire brush
If your grill is not sparking, there are a few possible reasons. The first is that the battery may be dead or low on power. If this is the case, simply replace the battery. Another possibility is that the igniter wire may be dirty or damaged. If this is the case, clean or replace the wire. Finally, the gas may be turned off or the gas line may be blocked. If this is the case, turn on the gas or clear the blockage.
COPYRIGHT © 2019
