If you have a gas fireplace, you may be wondering if a gas fireplace blower is worth the investment. Here are a few things to consider: 1. Does your gas fireplace have a damper? If so, a blower can help circulate the heat better. 2. Do you have a large room or open floor plan? A blower can help distribute the heat more evenly. 3. Are you looking for a way to reduce your heating bills? A blower can help you do that by circulating the heat better. 4. Do you
A fireplace can heat an entire house if it is the only source of heat. The size of the fireplace and the amount of wood that is burned will determine how long the heat will last. If the fireplace is not the only source of heat, it will still provide some warmth to the house.
A fireplace is a cozy addition to any home, but it can also be a source of drafts. If your fireplace is located in a room that tends to be cold, you may be wondering if you can add a fan to help circulate the air and improve the room's heating. Adding a fan to a fireplace is not a good idea, for several reasons. First, fireplaces are designed to draw air from the room and send it up the chimney. This is what helps to create the draft that keeps the fire burning. If you add a fan to the fireplace, it
4.4/5
Strong magnet! Easy and simple to place! Perfect for fireplace blower and fan kit applications
Magnetic Thermostat Switch for Fireplace Stove Blower Fan / Kit use, no screws and nuts needed
NOTE:Blower will not start until thermodisc is heated to approximately 120° F.
Temperature switch closes (turn on) at approximately 120°F and opens (shut off) at approximately 90°F (+/- 5°F tolerance)
Measures 2 1/2-inches in length by 1-3/4-inches in width.
$234
My original switch's on/off temperature specifications are unknown, but this switch is different from the OEM switch on my Monessen blower assembly. I appreciate that the magnet is so powerful because I had to move it around a bit to get the perfect location on the firebox. The side of the firebox closest to the front, low down, seems to be where it performs best. Even so, the blower continues to operate for a full 40 minutes after I turn off the gas logs. Although the blower has been pumping cool air for the past 20 minutes, the firebox is still heated at this point. I believe I'm set because it seems to turn on at the appropriate moment. Your results may differ. No complaints for the pricing. Nine years passed since the last stock swap. I hope the same with this one. I would have given it five stars if it had performed the same in the original position on the firebox.
4.4/5
Longer lifetime--There is a Bi-metallic safety device in the base of the stove fan.If the surface temperature rises above around 300℃,the safety device gently elevates the front of the fan to protect the TEG and motor.
Less Consumption ,More Efficiency--The stove fan will help reduce the fuel consumption and make the room warmer quickly.
Whisper-quiet--The only moving part is the blade assembly.You don't even know the stove fan is there,but you FEEL the WARMTH!
No Batteries or Electricity required--The stove fan uses heat from the stove surface to spin,adjust its speed automatically with the stove surface temperature.
Compact Size--8.7 x 6.7 x 3.6 inches,the material of the stove fan is aluminum.
$234
reducing propane I only use my wood stove to heat the house in the winter, keeping the kitchen, dining room, and loft areas open. The wood stove is in the dining room. As heat rises, the loft above the dining room was heating up to a comfortable 68–74 degrees, but the space around the kitchen table and sink, which is about 20 feet from the wood stove, was uncomfortable at 62–64 degrees.The issue was resolved with this tiny fan.It performs an incredible job. When the stovetop surface temperature gets between 150 and 200 degrees, it activates perfectly. Both sound and air sensation are absent. But it does a fantastic job of moving air. The temperature in the room is now constant. I also realized that I was feeding less wood. roughly 30–40% less.Although this fan is not a wind machine, it performs flawlessly as intended. Instead of all the air escaping up, it forces air into the area. A teapot and some morning toast may still fit on the surface of this ingenious invention, which also looks excellent on a stove.
4.3/5
✅ [ Compact Design ] - Height only 19 cm / 7.48'' to fit narrow spaces, ideal for all kinds of wood burning stoves, gas stoves, pellet stoves, etc.
✅ [ No Running Cost ] - Self-start at temp as low as 50°C / 122°F, no batteries required non-electric fan. Note: If the max temp on your stove top is even below 100°C / 212°F, DO NOT BUY, the fan will can't works efficiently.
✅ [ Burn Less Fuels, No Noise ] Quietly increase your stove efficiency, evenly distribute warm air thoughout the room with less fuels burned.
✅ [ Must Have Fireplace Accessories ] - Heat powered wood stove fan N429 makes you feel warm faster + Magnetic Stove Thermometer measures operating temperature to keep your stove safe.
✅ [ Lifetime Technical Support ] - The frequently asked questions can be found on the USER GUIDE, if still any questions or complaints during uses, just contact us directly for solutions. GalaFire always stand behind products.
$234
You need Adobe Flash Player to view this video.Download Flash Player.On a direct vent Empire propane heater, I'm utilizing this fan. I've got it perched on the vents. I took a chance even though the fan isn't really made to be mounted on vents, and it worked out beautifully. was more affordable and silent than purchasing the fan together with the heater. It's pleasant not to require electricity.
4.3/5
Silent and Quiet- The noise is less than 25db, you even do not know the fan is there, but you will still feel the warmth.
Overall size: 8.3â€X 4.9â€X 8.3â€. Operation temperature: 85°C - 350°C(185°F - 660°F). Good stove safety practice includes the use of a stove thermometer.
Eco Friendly- Heat Powered, the stove fan generates its own energy by the heat from the stove surface, and no batteries or electricity required.
Upgrade Version- Produces more warm air than the old version, circulates about 230CFM.
Easy operation- No assembly needed, just put on the top of stove, the fan will spin with the temperature getting higher.
$234
I use gas in my camper rather than a wood stove and put it on a cast iron plate. The iron plate is simply placed on the fan, which is then heated to the correct temperature by the low or low-medium heat from the stove. All it does is circulate the heat, and my camper is toasty as a result. Yes, I do open a window to let in some fresh air, and the fan takes care of the rest. I regret not doing this last year. An excellent product deserves an A .
4.3/5
Ideal for all room sizes, the AirMax circulates more warm air further into your home!
No electricity needed, Ecofans generate power by converting the heat from your wood stove into electricity
Designed and manufactured in Canada for over 20 years, Ecofans have been tested in the harshest winters and come with a 2 year limited warranty
Tested and proven to save you up to 18% in fuel with more efficient distribution of heat from your wood stove
Warm your room up to 38% faster with the largest and highest performing Ecofan model, the Ecofan AirMax
$234
The blower built into my woodstove is extremely loud and wastes power, so I got this in the hopes that it would take its place. This fan does have a really stylish design, doesn't require electricity, and moves a fair volume of air. In order to replace the blower even remotely, I'd probably need two of them.However, I am unable to use this fan as I had hoped due to a few problems. It's still a good investment, but I thought I'd point out some of the drawbacks so that others are aware of some of the restrictions before they acquire it.-from what I can see, the fan doesn't start on its own. The only way to start the fan after waiting until the stove reached 550 degrees is to manually turn it on. I have a thermostat on the stovetop, but it takes a long for the heat from the stove to reach the fan, so you have to wait for the fan to turn on for around 20 to 30 minutes after the stove has reached temperature.-At lower temperatures, the fan rotates extremely slowly. It only really pushes a lot of air at 500 to 600.Unfortunately, this severely reduces the fan's utility for me because I typically light a fire before work or night and leave it burning till it reaches 250–300 degrees. I don't have time to wait for the stove to achieve a high temperature and for the heat to reach the fan before turning on the fan manually.It's a cute little gadget that works well when I'm at home. Additionally, I can turn off the obnoxious blower when I have guests over, which is nice. However, it doesn't operate as well for the purpose I purchased it. Although I don't regret buying it, I do wish it could do more.
4.2/5
Heat powered - no batteries or electricity required.
Innovative and durable design.
Silent operation
Less consumption, more efficiency.
Efficiently circulates warm air throughout the room.
$234
I looked into a few of these heat-powered fans and didn't anticipate a lot of air being produced. I was purchasing something that I knew. The amount of air that this fan moved impressed me. It works reasonably well at 300 degrees, and when the temperature rises to roughly 425, you can feel the air moving. Others have voiced complaints about noise or a faint whining. At full speed, I did hear a whine, but it wasn't anywhere close to the noise my electric stove fan creates. My stove pipe's draft is almost as loud as the fan. To hear the whine moving at peak speed, the room must be silent. Compared to my electric stove fan, it also moves more air. I can observe a piece of paper towel moving in the air.This is a worthwhile investment in my opinion.
4.2/5
Total Length = 12.75" Height = 4.125" Width = 4.25" | 180 CFM, 3000 RPM, 120 Volts, 60 Hertz, CCW Rotation, Class H Motor Insulation (rated to 392°F / 200°C)
Comes fully assembled and pre-wired. Easy DIY installation. Instructions included. 1 year comprehensive warranty. Assembled and tested in Racine, WI USA
Kit includes dual blower unit, 3-prong power cord, rheostat variable speed controller, automatic thermostat and 2-prong adapter
High Quality Sealed Ball Bearing Motor - Powerful, Quiet, Superbly Balanced, Energy Efficient and Long Lasting
Does it fit your fireplace? See our compatibility chart in description. Makes for an excellent universal fit blower kit! If you don't see your model listed or have installation questions, please contact us directly.
$234
With a ball bearing motor, I believe it to be a fantastic fan for my Heat
4.1/5
Silent operation
Innovative and durable design.
Efficiently circulates warm air throughout the room.
Less consumption, more efficiency.
Heat powered - no batteries or electricity required.
$234
I purchased this to add to the automatic fan that comes with my Osburn 2400 stove. Sometimes after I start a fire, that fan takes a while to turn on, and it also shuts off by itself when the fire is gone but the stove is still hot. With the help of this fan, I can start heating the space as soon as the stove begins to heat up and continue doing so until it has nearly completely cooled down. It starts quickly and heats up quickly enough that you can't even see the blades since they are whirling so quickly. It makes absolutely no noise. I'm overjoyed I purchased this.
4.1/5
✅ - [ Monitor & Optimize Stove Efficiency ] Can be placed on the top or side of stove, single wall flue pipe ONLY, to avoid the wood stove fan damaged by overheat.
✅ - [ Exclusive White Needle ] The bright color needle moving is clearly visible even from far away.
✅ - [ Accurate Temperature Reading ] Face reads 100 to 800 °F with extreme accuracy.
✅ - [ 2-Year Warranty] Contact GalaFire Customer Support team directly for a fast solution if anything doesn't meet your standards.
✅ - [ 2019 Updated Design ] New Designed magnetic wood stove thermometer, easier to read the temperature.
$234
It's efficient. powerful a magnet It's challenging to read in dim light, but it's also simple enough that you become used to the ranges quickly and can tell by looking at where the needle is. Like every thermometer, this one will only function properly if you install it in accordance with the manufacturer's instructions and occasionally according to the intended design. For instance, although there may be some designs that accommodate, a "flue thermometer" typically assumes single-wall stove pipe, not insulated (double or triple wall). The maker of our wood stove advised mounting the thermometer on the side of the appliance, towards the top front corner. This was caused by the design's usage of inner plate metal. It would have read colder than it actually was if we had put it directly on top of the burner, as many non-flue-style thermometers recommend. Point: Read both the thermometer instructions and the handbook for your stove.:)
3.9/5
ENERGY SAVING – there’s no need to invest in additional heat sources or turn up the power on your stove, you can enhance the conditions with effective distribution alone
SELF REGULATING – operates automatically between 122 - 660°F with self-regulating speed. The temperature gauge included allows you to monitor and optimism stove fan efficiency to avoid damage by overheating. 160 - 190 CFM
IMPROVE THE PERFORMANCE OF YOUR STOVE HEATER – heat-powered fan increases the efficiency of your freestanding stove heater/pellet heater, or wood/log burner by effectively distributing heat. Includes a magnetic temperature gauge to monitor the heat and stove fan performance
NO POWER SOURCE REQUIRED – a thermoelectric module acts as a small generator to power the fan’s premium quality motor. No batteries or electricity required!
DIMENSIONS – H9" x W7.4" x D3.5 inches. Extra-large design to make maximum impact
$234
I would have given it five stars, but I've only had it for one week. It works; I took it out of the box and set it on the stove's side, and when it reached temperature, it started to turn. I also placed a magnet temperature gauge on the stove's side, and it read accurately. I read all the reviews, and it does what it's supposed to do. The hotter the stove is, the faster it turns. The temperature gauge performs best. And remember: it's not
Ceiling fans can help circulate heat, but they are not as effective as other methods, such as using a fan to circulate air.
A fireplace fan is a device that helps circulate the air in a room with a fireplace. The fan is placed on the hearth and the blades face the fire. The heat from the fire causes the blades to spin, which in turn creates a draft that pulls the air up the chimney and out of the room. The main purpose of a fireplace fan is to improve the efficiency of the fireplace and to reduce the amount of heat that is lost up the chimney. In addition, fireplace fans can help to distribute the heat evenly throughout the room, which can be helpful in rooms
A wood burning stove fan can help circulate the heat from your stove throughout your home. By doing so, it can help to improve the efficiency of your stove and reduce your heating bills. There are a few different types of wood burning stove fans on the market, so it is important to choose one that is right for your stove and your home.
If you have a fireplace that isn't providing enough heat, there are a few things you can do to try to increase the heat output. One is to make sure the flue is open so that hot air can escape. Another is to add a grate in front of the fireplace to help circulate the air. Finally, you can try using fireplace logs that are designed to burn hotter and produce more heat.
A fireplace is a cozy addition to any home, but if not used correctly, it can be quite inefficient. One of the biggest mistakes people make is not circulating the heat properly. Here are a few tips to get the most out of your fireplace: -Open the flue: This might seem like an obvious one, but many people forget to do it. The flue is there for a reason- to allow the smoke and heat to escape. -Use a fire screen: A fire screen will help to reflect the heat back into the room and prevent any sparks from
Installing a fireplace blower is a relatively easy process. The first step is to determine the size and type of blower that you need. Once you have determined the size and type of blower, the next step is to install the mounting bracket onto the back of the fireplace. After the mounting bracket is installed, the next step is to attach the blower to the bracket. Once the blower is attached to the bracket, the next step is to connect the power cord to the blower. Finally, turn on the power to the blower and test it to make sure it
COPYRIGHT © 2019