No, all car oil drain plugs are not the same size. There can be slight variations in size from one car make or model to another. However, most oil drain plugs are approximately the same size.
Are oil drain plugs universal? No, oil drain plugs are not universal. Each vehicle has its own specific oil drain plug that is designed to fit that particular make and model.
Yes, you can use a rubber washer on oil drain plug.
It is not recommended to use Teflon tape on oil drain plugs. Teflon tape is more likely to cause leaks than to prevent them. If a leak does occur, the oil will be able to seep through the Teflon tape and cause damage to the engine.
5/5
KIWI MASTER Update version,Fit perfectly,aftermarket replaces OE: 8414694,5414694
PURCHASE WITH CONFIDENCE -- Lifetime warranty,excellent quality,built to last,support return for undamaged,full non-defective products within 30 days after receipt of goods,satisfaction guaranteed
KIWI MASTER 100% brand new floor drain plug for 2014/2015/2016/2017/2018/2019 Polaris RZR XP 1000 900 XP 4 Turbo
Fit Models: 2015-19 RZR 900 (All models) ,2014-19 RZR XP 1000 (All models) ,2016-19 RZR Turbo (All Models) ,2016-19 General 1000 (All Models)
Easy to install,Drain plug for floor, body, and rocker panels
$234
These plugs work perfectly. I mistakenly believed that these would completely prevent water from entering the Polaris's bottom, much like kayak scupper plugs do. No, they don't. The drawback is that after you drain the water, the floorboard will become heavily soiled with debris. They fit snugly, earning me a 4-star rating. However, having them screwed in is useless if you intend to cross deep water. They must be suitable for just dirt trail riding.
5/5
Genuine Ford OEM product
$234
The drain stopper made of yellow plastic will fit F150 pickups manufactured in 2015 and later. It states it won't work, but I installed it on my 2018 5.0 F150. This is untrue; the older design, which had a 1/2 ratchet square in the middle, is the one for which the manufacturer component numbers were modified.
4.6/5
Needa Parts is an aftermarket industry leader in all sizes and types of engine and transmission plugs
Meets or exceeds OEM standards
Needa Parts offers all sizes and types of plugs, including standard, oversized, magnetic, piggyback, square head, and gaskets
$234
Because mine was leaking some oil, I purchased this drain plug for my 2007 Chevrolet Avalanche 5.3L. This plug stopped all leaks and also comes magnetised to remove metal shaving from oil when drained. This is a great idea, and it works great. Additionally, the wrench size is a 13mm, which is more common than the original size; I always had to search through all of my tools to find the right size. I rate it five stars.
4.6/5
Allows for clean and mess free oil changes
S-series Fumoto valve with short Nipple and lc-10 lever clip for 16mm-1. 5
Eliminates stripped threads and frozen plugs
Remember to tighten at the body, NOT the nipple
One touch operation
Short Nipple for smallest possible profile
An extension adapter may be required in order to install this valve for some vehicles
$234
The product is weighty and feels high-quality, and the threads appear to have been well-machined.After my most recent oil change, my OEM drain plug—probably made of a metal that is far too soft—began to leak (4th oil change). It was because of this that I eventually fired the Fumoto. The simplicity of not having to replace the OEM drain plug every two oil changes makes up for the price premium over a conventional drain bolt, in my opinion.I didn't immediately purchase this valve because I reasoned that the threads sticking out into the drain pan would make it harder to drain the oil. However, I came to the realization that the container inside the pan probably protrudes approximately the same amount and therefore some oil will never be completely emptied. Better than discovering a leak through a plug soon after a brand-new oil change, in any case.Furthermore, no matter how carefully you pull the plug out, the WRX has a tendency to eject oil like you've hit an oil reserve. Thus, this is a major plus (
4.1/5
Simple to install and operate
Safely change your oil without contacting hot oil
Clean & mess free oil change
$234
The installation process was simple. To keep the valve in the proper position as I torqued the bolt to specification, I had to repeatedly loosen and tighten the bolt. But it only took a short while. There haven't been any leaks for a week.Because the drain plug was on the side of the pan, changing the oil in my truck was always a disaster. At first, the oil would shoot out a few feet, but as it drained, the stream would creep inward and I would have to continuously adjust the drain pan to "guess" where it would go. I was never able to change the oil without spilling it all over the garage floor and myself.This will undoubtedly make changing my oil much simpler and keep me lot cleaner. (However, I still need to take care of the oil filter.)
4/5
Needa Parts is an aftermarket industry leader in all sizes and types of engine and transmission plugs
Needa Parts offers all sizes and types of plugs, including standard, oversized, magnetic, piggyback, square head, and gaskets
Meets or exceeds OEM standards
$234
To replace my 2002 VW Passat 1.8T exactly. Had no trouble threading it in, there have been no plug leaks, and the magnet has been in position without incident. I will soon need to change my oil again, and I have no qualms about replacing it with another of these plugs.
3.9/5
Direct replacement for a proper fit every time
Our Oil Drain Plugs are designed and constructed to strict engineering quality standards
$234
For my 1989 Ford Ranger with a 2.9L V6, I bought this. My father was the first owner, and it has been kept in a garage for virtually its entire existence. The gasket that should have been included in the initial plug they distributed was absent. I contacted the vendor, who promptly sent me a replacement while advising me to keep the first one I got as a backup. Since I replaced it, my truck hasn't spilled a drop of oil in the garage. excellent fit
Yes, you can over tighten an oil drain plug. This can cause stripped threads or even break the plug completely off. It is important to follow the torque specifications for your vehicle when tightening the oil drain plug.
Most oil plugs do not come with a gasket, and one is not necessary. The threads on the plug will create a seal when they are tightened.
When changing your car's oil, you should always let the old oil drain out for at least a few minutes. This ensures that all of the old, dirty oil is removed from your car's engine. Allowing the old oil to drain out completely also helps to prevent any potential oil leaks.
An oversized oil drain plug will last for a long time. It is made of durable materials that can withstand the heat and pressure of the oil. It is also designed to be used with an oil filter to extend the life of the oil.
It typically costs around $20 to replace an oil plug. This will vary depending on the make and model of your vehicle.
COPYRIGHT © 2019