Yes, brush guards can work against deer. They can prevent the deer from getting too close to your vehicle and causing damage.
Bull bars are a type of vehicle accessory that are designed to protect the front end of your truck in the event of a collision. They are typically made from steel or aluminum and are mounted to the frame of your truck. While they can offer some protection in the event of a collision, they can also cause serious damage to the other vehicle involved.
Grill covers are not just for protecting your grill from the elements during the off-season. In fact, using a grill cover in winter can actually help extend the life of your grill. By shielding it from snow, ice, and wind, a grill cover helps prevent rust and corrosion that can shorten the lifespan of your grill. So if you're looking for a way to keep your grill in good condition for years to come, consider investing in a grill cover.
4.7/5
Sturdy 2 inch tube adds rugged style and functionality for the Jeep Rubicon
Easy bolt-on installation - no cutting, drilling, or grinding
Available in low, mid, and high stinger styles
Durable powder-coated finish guards against corrosion
Grille guard tube that provides increased front end protection to the Jeep Wrangler JL
$234
This is high-quality and simple to install. The component perfectly matches my 2019 JLUR steel bumper. The bar leans forward, so I didn't want it to stand out too much, therefore I chose the modest height. I don't think this bar is permitted in Australia because, in theory, bars should be angled to allow hit pedestrians to roll over the bonnet. (I don't intend to hit anything, particularly pedestrians.)The screws are Torx T45, and I covered them with a thin towel to prevent scratching as they will be used again. Since the screws are locktitted in, removing them requires a firm hand. I reinserted using anti seize. 15 minutes fit and I'm good to go.
4.7/5
Durable powder-coated finish guards against corrosion
Sturdy 2 inch tube adds rugged style and functionality for the Jeep Rubicon
Available in low, mid, and high stinger styles
Grille guard tube that provides increased front end protection to the Jeep Wrangler JL
Easy bolt-on installation - no cutting, drilling, or grinding
$234
This is high-quality and simple to install. The component perfectly matches my 2019 JLUR steel bumper. The bar leans forward, so I didn't want it to stand out too much, therefore I chose the modest height. I don't think this bar is permitted in Australia because, in theory, bars should be angled to allow hit pedestrians to roll over the bonnet. (I don't intend to hit anything, particularly pedestrians.)The screws are Torx T45, and I covered them with a thin towel to prevent scratching as they will be used again. Since the screws are locktitted in, removing them requires a firm hand. I reinserted using anti seize. 15 minutes fit and I'm good to go.
4.6/5
SURFACE FINISH - TAC bull bar is made of heavy duty steel with dual stage powder coated glosses black finish.
FITS PERFECTLY - Fit 2004-2019 Ford F150 (Excl. Heritage Edition and 10-14 F150 Raptor Models) / 2003-2017 Ford Expedition (Please contact us to confirm fitment before ordering.)
EASY TO INSTALL - Direct bolt-on, all mounting hardware and Installation instruction included. Professional installation is always highly recommended.
OUTSTANDING DESIGN - TAC bull bar creates a tough, heavy-duty appearance on the front end of your car while also providing protection and visibility.
NO-HASSLE WARRANTY - High quality standard. 3-year warranty against manufacturing defects!
$234
This item arrived swiftly and was superior to what I originally believed I had ordered. Strong and nicely polished material (I purchased the gloss black BB). The installation process was also quick and simple! Without taking into account the time it needed to remove the tow hooks from my truck, it took me around 30 minutes to complete the installation. I created a step-by-step video to demonstrate how to install it on my 2006 Ford F150 because the printed directions were a little difficult to grasp (you can look it up on YouTube). I adore this item and will most definitely make another purchase from TAC!
4.5/5
This upper replacement grille is an excellent way to add a rugged appearance to the front end of your 2014-2019 Toyota Tundra. Featuring a honeycomb style pattern, this grille includes three integrated LED accent lights across the top. Designed to be installed in place of your factory grille, this grille will manifested the appearance of your Tundra,from a mild mannered daily driver.
The front grille manufactures from a high quality acrylonitrile butadiene styrene (ABS) material. ABS is known for its light weight, superior durability and impact resistance making it the ideal material for use on and off road. This grille completed in a charcoal gray finish for aggressive good looks.
This main grille also includes three high mount amber LED accent lights. These LED accent lights come with a wiring harness that simply splices into your Tundra's existing factory headlight harness. The eye-catching LEDs not only look great, but will also make your Tundra more visible to other drivers at night and in poor weather conditions.
Designed to be a direct fit replacement for the original factory grille. There is no cutting or modifications required for a clean straight forward install. Installation can be completed in about an hour with just basic hand tools.
This Grille with LED lighting accents is specifically designed for use on the 14-19 Toyota Tundra models. This is a replacement grille not an overlay.
$234
Although I didn't particularly like the grill on the white vehicle in the picture, I decided to give it a shot on my dark truck and I absolutely adore the way it looks. Each light is connected to the electrical harness, however the other end merely has bare wire pigtails. I advise using a fuse adapter. really simple installation
4.5/5
If you receive a product with dents and scratches on the surface, or have any hardware and brackets missing; or have any questions about the installation. Please feel free to contact us.
Built-in 72W 25 inches LED light bar designed to increase visibility and provide light where headlights don't (Removable). At the same time, the pre-drilled can easily add extra lighting
Bumper bar is made of 3" heavy duty tubing frame, offer the best in durability and strength. E-coating and black powder coating finishing for rust-resistant
ã€Perfect Fit】 This glossy bull bar Compatible for 2004-2020 Ford F150(Excludes Raptor/Ecoboost/Heritage Edition)/2003-2017 Expedition/2007-2017 Lincoln MK-LT.
Easy bolt-on installation. No drilling required. Front bumper, mounting brackets & Wiring Harness (8ft), modular skid plate and instruction are included
$234
Good item, especially considering the cost. I paid $174.00. The installation is simple, and the directions are easy to understand. I removed the skid plate, painted it white to match my truck, and then put it back on. It's really simple to take out. There are only 2 drawbacks, neither of which is a deal breaker: 1) The cable coming from the light bar ought to be longer. In any case, I attempted to run the wire where it was concealed, but I was in a terrible position and had no place to heatshrink the wire from the light bar to the electrical harness. 2) I wish there was a way to keep the bar and my tow hooks. I really dislike the lack of front tow hooks because there is no way to be pulled from this bar.
4.4/5
Bumper grille guard with removable skid plate, 2 patterns for you select. Add more protection and make a new look to your truck/pickup.
Mounting brackets and necessary parts are all included. Also come with wiring harness for you to control the led light bar on/off.
Made of heavy-duty 2.5inch tubing frame with durable E-coating gloss black finish for rust resistance and customized look! Seamless welding for a strudy structure.
Pre-drilled holes for 20inch 126W led fog light(Moungting brackets and wiring harness included)
Apply to 2007-2017 Toyota Tundra. Easy bolt-on installation.(If equipped_ tow hooks need to be removed.) Compatitable with original built-in parking sensor.
$234
Installation was simple, and the light was very brilliant.
4.2/5
ã€Perfect Fit】 This glossy bull bar Compatible for 2004-2018 Ford F150(Excludes Raptor/Ecoboost/Heritage Edition)/2003-2017 Expedition/2007-2017 Lincoln MK-LT. 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 & 2018
ã€Easy to Install】100% bolt-on installation, no drilling required. Installation can be done easily in a home garage using common tools. (All mounting hardware and installation instructions are included.)
ã€Outstanding Design】Features pre-drilled holes to easily add additional lighting. The anti-rust skid plate can be removed. This Ford F150 guard bar not only gives your vehicle a new look, but also adds more protection
ã€Surface Finish】The push guard is made up of a 3" heavy duty tubing frame that offers the best in durability and strength. A special e-coating and black powder coating finish are applied to make it rust-resistant. Seamlessly welded with a smooth appearance
ã€WARRANTY】 No-hassle limited lifetime warranty against manufacturing defects. If you receive a product with dents and scratches on the surface, or if you have any hardware and brackets missing; or have any questions about the installation. Please feel free to contact us
$234
Pros include the excellent price, high-quality construction, quick shipping, and ability to install on a variety of vehicles. On a 2007 Explorer Sport Trac, I put this in. To align the Bull Bar with the frame, some of the plastic covering the lower bumper piece had to be trimmed at the bottom. Although it rests a little lower, the bumper and underside are still protected. Being thinner than some Bull Bars means it will ding more easily, which is a minor con. I only gave a parking pole's concrete handicap base a light tap, and it sustained a small dent and scrape. I'm still content with it, especially given that it costs around half as much as other bars. It fulfills its purpose, and most modern cars have plastic bumpers that can break with only a minor hit from another car in the parking lot, costing hundreds of dollars to replace.PS: I'm hoping they begin producing a rear bumper guard as well. Without a doubt, I'll purchase from this merchant.
3.9/5
$234
The finish matches the stock JL steel bumper perfectly, and installation could not be simpler! With the use of your Jeep Torx tool kit, just remove the four factory screws that are now secured to the bumper's top side, then reinstall the replacement screws in the same original holes. Although it is somewhat expensive, the fit and workmanship are excellent, and it adds a pleasant touch to the front end without being excessive.
A grill guard is a metal screen or grille that covers the front end of a vehicle to protect it from debris. Many people believe that grill guards can help improve gas mileage by protecting the radiator and grill from damage. However, there is no evidence to support this claim. In fact, grill guards can actually increase drag on a vehicle and reduce fuel efficiency. If you're concerned about gas mileage, it's best to avoid grill guards.
It is a common misconception that tailgates reduce gas mileage. However, there is no evidence to support this claim. In fact, tailgates can actually improve gas mileage by providing a more aerodynamic profile for the vehicle.
Most grill guards do not void the warranty on your vehicle. However, it is important to check with your vehicle's manufacturer to be sure. Grill guards can offer significant protection to the front end of your vehicle, and can help to avoid costly repairs.
No, the grill does not protect the radiator. The radiator is located behind the grill and is made of metal. The grill is made of plastic and is not strong enough to protect the radiator from being hit by a ball or other object.
There are a few things to consider when deciding whether a brush guard or bull bar is better for your needs. One is the size and weight of your vehicle. A bull bar is typically going to be heavier and bulkier than a brush guard, so if you have a smaller vehicle, a brush guard might be a better option. Another thing to consider is how much protection you need. A brush guard will protect your headlights and grill from brush and debris, but a bull bar will offer more protection for the entire front end of your vehicle. If you do a lot of off-roading
No, a brush guard is not the same as a grille guard. A brush guard is a piece of equipment that is mounted on the front of a vehicle to protect it from brush, branches, and other debris that may be kicked up by the tires. A grille guard is a piece of equipment that is mounted on the front of a vehicle to protect the grille and engine from damage that may be caused by hitting a large object, such as a deer.
COPYRIGHT © 2019