5/5
3209801 3209801S 71095801 3209803 3209803S 3209804 3209804S 19991140051
One year Warranty!
Meets or exceeds OEM specifications
32-098-03S 32-098-04 32-098-04S 1999-1140051
$234
Within 5 minutes, this starter was bolted up, and the tractor was up and running. When purchasing equipment parts, due diligence is essential. While component numbers vary from one manufacturer to the next, most of the time, it is the same part, produced by the same manufacturer. I located mine by conducting a search on Amazon using the Kohler engine model number and the word "starter." My tractor has a Kohler courage SV730 engine and is an Ariens 93604000.The starter is just as I anticipated and is operating properly. A
4.8/5
Sold on Amazon
$234
I need to travel twelve miles to a nearby small city, to the North Country Tractor dealer, in order to get a gallon of Hy-Tran fluid (this particular type, in fact—an errand that takes around two hours). In contrast, Amazon sends the same gallon to my mailbox for the same price. Why is Mr. Bezos the richest man in the world?
4.7/5
Fox Factory High Pressure Shock Pump With Bleed Valve 300psi
$234
This is really good. The pump has a diameter that is similar to that of a Sharpie marker. This little cross-section easily produces a large amount of PSI. The pressure relief valve operates effectively. I was able to pump my shock up to 250 pounds, but at that point, I only get 10% of the recommended load travel and must release pressure to achieve the full 25%. I could hardly obtain 125 PSI with the included pump (a cross section of a quarter), and even with only my weight, the ride was mushy and had almost 50% travel. Double the price for better materials and construction
4.7/5
Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts.
$234
Since the valve cover comes off during the replacement of the head gasket, which is a REALLY common problem (I've changed three and only owned three of those engines, so my failure rate was 100%), changing the valve cover gasket is an excellent idea. Because my engine had sealant, I cleaned it and installed the gasket dry in accordance with B
4.7/5
John Deere Original Equipment Flat Belt #GX21833
$234
I own a John Deere D140. I was going to try to save a little money by purchasing a generic belt, but after reading some other reviews, I realised it would be worth it to spend the few extra dollars to obtain the authentic item. This was simple for me to put on and it works perfectly. The guards and pulleys had to be removed, but I didn't have to remove the deck. Even more useful than the illustration in the instructions was the depiction on the back of the cardboard that wraps around the belt (yes, I broke down and actually read directions). I'm really glad I chose this belt.
4.4/5
1 quart Polaris AGL
Convenient Funnel
1 quart Polaris Demand Drive
$234
I liked that this oil meets the specifications for my Ranger 800 XP's front differential and transmission. The only thing I don't like is that the bottle holes are big and my manual oil pump doesn't screw on to the bottles to fill the front diff and trans oil filler ports. I just used my pump to fill the cases after adding some oil to an old, empty bottle.
4.4/5
Compact, easy to carry
Designed to increase your chances of a successful hunt
Better products, better hunt
$234
My friend's deer feeder kept not dispersing food. It would make about a quarter turn before stopping. We finally made the decision to replace the motor after far too much thought. We had no more issues after doing that, and I wish I had done it sooner.This motor was completely compatible with our 6 volt system and matched the OEM motor down to the stampings on the part numbers. Using simple hand tools, it took me approximately 10 minutes to install (screwdriver, allen wrench).The only issue I have is that the motor's polarity is difficult to discern when it is mounted in the feeder. I marked a " " and a "-" using a sharpie on the sides of the motor to make it simple to wire it in place without doing it backwards.Overall, our feeder's replacement motor is excellent.
4/5
Includes vertical 3/8" NPT male inlet and 1/4" female outlet, 1-1/4" long bowl
Replaces: 180141M91, 180141M91GV, 2N9155B, 2NAA9155BGV, NAA9155B, 17C152
Fits: Ford Tractor: 9N, 2N, 8N, NAA. Massey Ferguson Tractor: TE20, TO20, TO30, TO35, MF35, F40, MH50, MF50, MF65, MF85, MF88. Industrials: 35, 202 (prior to s/n 309328), 204 (prior to s/n 343891), 302 (prior to s/n 119700213), 304 (prior to s/n 119750210), 356 (prior to s/n 670001084)
$234
My friend's deer feeder kept not dispersing food. It would make about a quarter turn before stopping. We finally made the decision to replace the motor after far too much thought. We had no more issues after doing that, and I wish I had done it sooner.This motor was completely compatible with our 6 volt system and matched the OEM motor down to the stampings on the part numbers. Using simple hand tools, it took me approximately 10 minutes to install (screwdriver, allen wrench).The only issue I have is that the motor's polarity is difficult to discern when it is mounted in the feeder. I marked a " " and a "-" using a sharpie on the sides of the motor to make it simple to wire it in place without doing it backwards.Overall, our feeder's replacement motor is excellent.
3.5/5
Consult Your User Manual For Parts Blow-Out Diagram
Authentic Agri-Fab Parts
Agri-Fab Parts Are The Highest Quality
No Assembly Required
$234
Would repurchase it. It ought to have lasted a bit longer. It was the advertised measured length when stretched out by pulling on it while applying pressure to it. Fortunately, the additional 4-6" open width that was present would not have been necessary for my application. Although it appears to be thick enough to be sturdy, I don't think it will survive longer than 5 to 6 years before it starts to crack and needs to be replaced. I keep it inside. I would estimate that if it were exposed to the light and weather outside, it would take around two years before major cracks and brittleness would become a problem. However, if you require the exact quoted distance, you might fall a few inches short. I would still buy it again.
COPYRIGHT © 2019
