78a wheels are softest wheels available on the market, and are therefore not suitable for all skating conditions. If you are skating on smooth surfaces, such as polished concrete or asphalt, then 78a wheels will be fine. However, if you are skating on rougher surfaces, such as concrete with cracks or pebbles, then you will want to use a harder wheel.
Yes, 95A wheels are good for street skating. They are not too hard, so you can do tricks on them, and they are not too soft, so you can go fast on them.
Cheap skateboard wheels are a dime a dozen. You can find them at your local skate shop, online, or even at the dollar store. But just because they're cheap doesn't mean they're not good. In fact, some of the best skateboarders in the world ride on cheap wheels. Cheap wheels are often made from lower-quality materials, which can make them more susceptible to flats and breakage. But if you're careful with your skateboard and don't ride it too hard, cheap wheels can last just as long as the more expensive ones.
The size of the wheels on a skateboard can affect the speed of the skateboard. Larger wheels can make the skateboard go faster, while smaller wheels can make the skateboard go slower.
4.9/5
$234
excellent sliding control and traction. Just make sure the wheel bearings must be pressed in using the outer race by the installation. If a wheel bearing is pressed into the center bearing race, possible damage could result. In case you don't have a bearing press, a socket with the same diameter as the outer race is a perfect alternative. A nice approach to press wheel bearings is using a large C-clamp, if you have access to one. The wheel bearings can be pressed in using a vice. Keep in mind that adjusting bearing tension is essential to preventing freewheel drag. Keep in mind to spin the wheel and secure it to the truck. In the event that the wheel slows down abruptly after spinning, back off the locking nut until the required free wheel spin rolls smoothly and without resistance. You'll be happy you did if you order these.
4.7/5
Live to Burn Bighead Edition
Wheels Sold in Set of 4
These Wheels are the #1 performance urethane wheels, Made in USA
Available in Different Sizes and Colors
$234
AMAZING Wheels I bought these to replace the subpar OJ wheels that came with my Santa Cruz board and are now worn out. These wheels are 53mm in diameter, just like the originals, and they are also a little bit tougher. However, the hardness poses no issues at all, and they perform flawlessly. Personally, I even think they're a little bit smoother than the originals. On smooth concrete, the wheels' traction and grip are superb, especially while skating against walls or in a diagonal motion.Although I haven't tried these wheels for street skating, I can see how they may be appropriate.Even though my skateboard is black (and had black wheels at first), the green and white color scheme is actually quite stylish. At first, I had my doubts about combining the two, but I am quite happy with the outcome. In addition to being built in the USA and being of outstanding quality, I particularly like that these wheels came with a Spitfire sticker (red), which looks great on the underside of my board.
4.7/5
LARGE, SUPPORTIVE CORE — The fully exposed 46mm core reduces weight while providing quick acceleration and lots of momentum. Compatible with any electric skateboard that can accommodate Orangatang Kegels, allowing for an even faster and smoother ride.
FUNCTIONAL DESIGN — The 56mm contact patch with its surface skin provides confident grip, while the subtly rounded edges help the wheels pass smoothly across pavement cracks.
FAST AND COMFORTABLE — With a large 85mm diameter, the Caguama rolls with incredible speed and plows over cracks, rocks, sticks, and the roughest roads.
BIG, SMOOTH LONGBOARD WHEELS — Designed for maximum speed, comfort, and momentum for longboard commuting, carving, long-distance pushing, pumping, and electric longboards.
HAPPY THANE FORMULA — The original Orangatang urethane formula is fast, smooth, plush, and grippy. Now available in three durometers: 77a (blue), 80a (orange), and 83a (purple).
$234
Wheels that are insanely fantastic. the orange as well as the purple. I have a cheap Minority Downhill board from Amazon and a Landyachtz Drop Carve.They plowed through everything when I did my drop carve because they were like frigging monster truck wheels. Sadly, they were too huge to be comfortable, as I had expected. I didn't like how top mounting the drop carving felt because there was no wheel bite just a slight bit of shoe rub. Fortunately, I have some Orangatang Stimulus 70mm/86a, which are the embodiment of love.However, these are beautiful on my top-mounted Minority Downhill board. Well, these, Zealous Green bearings, and Dime Bag wedged risers.The speed of these wheels is astounding, holy f***. These wheels are even faster than my Stimulus ones, Jesus Boogaloo Christ. Even after my Stims have ended, I continue to roll. same bearings and cornersMy Stimulus wheels are also very anti-rocks and have no qualms about sending those stoney sons of hounds back to their native land (the side of the road), but some of the larger ones will choke them. These throw quarter-sized rocks into the air with ease and behave as if those same rocks don't exist.Ride is not brand-new. Smoothly bent, but not terrible. I feel so unstoppable it's dangerous. Because if I rode as I do on smaller wheels, I would fall face first to the ground and eat my own teeth.Do you imply that I can see a fissure in the ground by that? Hump it to the ground. Rocks? Simply be rude and repeat the process without even rinsing. There is so much trouble in the world, dude, can anyone sense your anguish when I witness people choke on that stuff.Last but not least, these are shockingly agile and incredibly thick in depth. Turning at high speeds is utterly captivating. If you can slide these without hitting 40 mph, you're either hydroplaning on ice or some exaggerated oil slick.TL;DRamazing wheels Put them on your board if it can support them. Get a board that can if it can't and stop wasting your life if it can't.
4.6/5
These wheels are perfect for penny board.They are great for cruising and many early street tricks.They can also do well on smooth concrete or asphalt.
Wheel size: 60mm diameter x 45mm width; Durometer count: 83A Polyurethane wheels.
They roll pretty smooth,very durable for street skating and extremely smooth on skate park terrain.
There is delicate packaging,and the design keeps boards cool. It is better for gift.
Set of 4 wheels.There comes with ABEC-7 high steel bearings and spacers, which have been installed on wheels.
$234
What I say has nothing to do with the function in that sense because I am not a skater. I'm making a truck box to go on the rear of my vehicle. When I need to access tools and the like, it will slide out on these, holding the back doors open. When I do something like this, skate wheels like these are my best option. Silent operation and smooth. They don't squeak and are perfectly round, allowing me to manufacture everything with tighter tolerances for less endplay and greater overall performance. I hope I was able to assist someone. Enjoy!
4.5/5
The wheels are better for PU material,it rides fast and smooth,you can go over small road pebbles with ease.
There comes with ABEC-7 high steel bearings and spacers, which have been installed on wheels.
70mm diameter x 51mm width;83a durometer polyurethane wheels
The pro longboard wheels roll pretty smooth, it's very durable for street skating as well as on skate park terrain.
I think you would like to dress up your skateboard,the delicate design with dot pattern enhanced your wheels all entire series interest.
$234
Very happy. On my 22 inch Penny, I displayed them. Slides are a lot of fun, even if I had no intention of doing them. The fact that I have a spare pair of Bones that I haven't even worn should indicate that the bearings in these are generally fine. Was concerned that I would regret not spending an additional $30 on orangatangs, but these are a lot of fun. I barely get a little toe bite and no wheel biting. The fact that I try to keep the trucks as close together and weigh 220 pounds might be helpful. Big wheels are fantastic; I may even purchase risers and upgrade to 80mm wheels.
4.4/5
PREMIUM BEARINGS — Set of 8 ABEC-7 bearings equip the front and rear axles.
SPACERS INCLUDED — 4 spacers extend the life of your bearings and make for smooth, stable skating.
IDEAL HARDNESS — 99A and 100A PU wheels are the perfect combination of speed and grip.
SMALL WHEELS — 52mm size is ideal for trick and technical riding.
VERSATILE USE — A great choice for skating street, ramps, pools & parks.
$234
This wheel and bearing set is really good for the price. The wheels maintain their quality just as well as other reliable cheap wheels (like Mini Logo, for instance). They do the job and are more than adequate for park skating, despite being slightly narrower and softer than other 99A wheels (perhaps because of the dye). The bearings, though, weren't really impressive. Even after a few skate sessions to break them in, they don't skate nearly as fast (or as loudly) as my pair of Autobahn ABEC 5s that I purchased a few years ago. I can't really complain, though, because the package was only $12–$13. These are a good option if you're short on cash and need wheels or bearings right now.As a side note, I ride an 8.0 deck with Indy Stage 11s and weigh around 170 pounds, so these wheels are always able to support a significant amount of weight. After a few months, there was no flatspotting.
4.4/5
Hand poured & shaped
100% made in USA
Guaranteed against all defects
True 99 durometer
$234
They are excellent, in my opinion, and I have been using them for a few months. On asphalt, they drive rather quickly and dig nicely. Additionally, they haven't even slightly flattened.
4.3/5
Universal fit for most skateboard wheels, and made from high quality super durable materials.
Learn Skateboard Tricks fast with Skater Trainers, a Patented Invention Made in the USA
SkaterTrainers are endorsed by top skateboard instructors and Guaranteed to Help
New Colors. heck out SkaterTrainers other listings for more colors and 100's of great reviews.
If your kid asked you for Skater Trainers, These are the Real Ones
$234
From childhood through high school, I skated, but I eventually stopped. No matter how hard I landed, the rust would not simply come off when I recently started again after 20 years. These little fellows worked wonders because I was tired of having bruises and bumps. I was falling hard, blasting the board off, and landed wrongly on the board. When these instructors pointed out that I was landing in the middle of the board, I concentrated on landing properly. Although it may not be attractive, I can now roll away by doing an Ollie and pushing the object. Yesterday, I was unable.
4.3/5
OEM replacement parts and available in standard items with excellent performance formual that maximizes durability and stability. FREEDARE offers a 6-month warranty on all complete wheels because stands behind the quality and craftsmanship.
These wheels are perfect for penny board and great for cruising and early street tricks. They can also do well on smooth concrete or asphalt.
They roll pretty durable for street skating and extremely smooth on skate park terrain. It's light bright when playing because of the three LED lights.
Cruising Wheels size: 60mm diameter x 45mm width; Durometer count: 83A Polyurethane wheels.
There comes 4pcs cruising wheels with bearings have been installed. They are black cores with three lights wrapped in 83A lucency PU high-grade urethane.
$234
Excellent for a comfortable ride on concrete and roads. Amazing value considering what is offered.These wheels barely reach the board's edge when I run an 8" board with 7.5" trucks. So, yeah, they do protrude slightly. These wheels will protrude further than your board if you have a 7.5" board and 7.5" trucks. Tricks become even harder as a result.Regarding tricks, it is possible to perform them on them, but I strongly advise learning them on a board with smaller wheels first. I just don't see someone learning the tricks outright with these wheels on the board; it is much harder to do tricks with these wheels if you don't already know them.
4.2/5
SKATEBOARD PARTS SET: It inclouds skateboard trucks 5.0, skateboard wheels 52mm, skateboard bearings Abec 7, skateboard screws 1", skateboard riser pads 2mm, skateboard spacer
SUTABLE FOR 7.5-8" SKATEBOARD DECK, This skateboard set fits all 7.5†to 8" skateboard decks. If you have all-in-1 skateboard tool that will be more simple to putting a skateboard together. Our packet size all-in-1 skateboard tool is easy to carry and ues it anytime you want to adjust your parts. Hit the road now!!
A GOOD ALL-PURPOSE SKATEBOARD WHEEL, Our wheel 52mm, 53mm and 54mm is 99a durometer which is easy to get off the ground. They are hard wheels and will give you good control for tricks and mobility.
608 STANDARD ABEC 7 SKATEBORD BEARINGS, This skateboard bearings is most common 608 industry standard and match up with nearly every skate wheel. The measurements are 8mm (core), 22mm (outer diameter), and 7mm (width).
MID-SIZED SKATEBOARD TRUCKS, This is 5inch hanger 7.6inch Axle aluminum trucks w/ 90a hardness bushions and 6-hole baseplates, which will fit both the old school pattern and the new school pattern. And the mid-sized trucks suit most skateboarders for park or street skateboarding.
$234
For the price, this tiny set is good quality. I simply wanted to complete certain things that I had been too afraid to attempt when I was younger. I believe I'll either replace the pieces as I improve or mutilate my current ones. Remember that everything is manufactured in China, so there may be some variance from batch to batch. But for me, it all fits together rather beautifully. Despite what some people claim, the bearings were the weakest component for me. I move forward 15 feet. Re-greasing them is something I'm going to try to see if it helps. This is not the set for you if you're searching for a professional-quality one. But if you look at the pricing, you should be able to tell that.
The general consensus is that harder skateboard wheels will go faster than softer ones. This is because the harder the wheel, the less friction it will have with the ground, and therefore the less resistance it will encounter.
Most skateboarders will say that the wheels are the most important part of the skateboard. The two main things that affect how your wheels perform are the durometer and the size. The durometer is the hardness of the wheel and is measured on the A scale. The harder the wheel, the less grip it will have, but it will also last longer and roll faster. The size of the wheel is also important. The larger the wheel, the faster it will roll, but it will also be more difficult to control.
Wheels are one of the most important parts of a skateboard, and they can make a big difference in how your board rides. Wheels come in a variety of sizes, shapes, and materials, and each type can impact your skating in different ways. Smaller wheels are typically better for street skating, while larger wheels are better for cruising and going over rough terrain. Softer wheels are better for absorbing shocks, while harder wheels are better for speed and durability. Ultimately, it’s up to you to decide what type of wheels you want on your skateboard, and experiment until
Skateboard wheels come in a wide range of prices, depending on the quality and brand. You can find good quality wheels for as little as $30, or you can spend over $100 for top-of-the-line wheels. It really depends on your budget and what you're looking for in a wheel. If you're just starting out, it's probably best to go with a cheaper option. But if you're looking for something that will last a long time and perform well, it's worth it to spend a little more.
No, 12 mph is not fast on a skateboard. The average speed for a skateboarder is around 15 mph.
Riding a skateboard is definitely harder than riding a bike. It takes a lot more balance and coordination to ride a skateboard, and it's also harder to control. You have to be really careful when you're riding a skateboard, because if you fall, it can be really easy to get hurt.
COPYRIGHT © 2019
