LED projectors are becoming increasingly popular, as they offer a number of advantages over traditional lamp-based projectors. LED projectors typically have a longer lifespan than their lamp-based counterparts, as well as being more energy-efficient. They also tend to produce less heat, which can be a major advantage in some situations. Overall, LED projectors offer a number of advantages that make them a great choice for a variety of applications.
Yes, projector lamps can be repaired. However, it is important to note that projector lamps are not designed to be repaired. The cost of repairing a projector lamp can be quite expensive, and it is often more cost effective to replace the lamp.
Yes, you can put an LED bulb in a projector. However, there are a few things to keep in mind. First, LED bulbs are typically brighter than traditional bulbs, so you may need to adjust the projector's settings. Second, LED bulbs tend to have a shorter lifespan than traditional bulbs, so you may need to replace them more often.
If your projector bulb burns out, you may be able to replace just the bulb instead of the entire lamp. This can be a more cost-effective option, but it’s important to check with your projector’s manufacturer to see if this is an option for your specific model. Replacing just the bulb may be a bit more challenging than replacing the entire lamp, so it’s important to follow the manufacturer’s instructions carefully.
5/5
Professional Series: High end quality option for your projector.Bring back the day one brightness of your Device
Compatible Models: WD-60738, WD-60C10, WD-65638, WD-65C10, WD-73638, WD-73738, WD-73C10, WD-82838, WD73838, WD-82738, WD-65738, WD-65838, WD-60638
Original Philips 915B441001-UHP Lamp & Housing for Mitsubishi TVs - 180 Day Warranty
Easy install: Housing included, minimize installation time to make sure your device is back in action
$234
The old lamp has been in service for more than 6060 hours. The bulb that comes with the TV, according to the owner's manual, has a lifespan of between 4,000 and 6,000 hours. Even though I could still see the TV, I could tell the picture quality had declined. The shadows or dark areas lacked definition and the colors were less vibrant. TV, 73837, is older than five years.I bought this lamp four weeks ago and saw an improvement in picture quality right away. I was able to use the AV2 setting for the picture and adjust the bulb setting back to "Energy Savings." My TV is initially calibrated at this setting! This is an OEM bulb, as far as I can determine. There was even information on how to confirm authenticity on the packing!One of the screws used to secure the lamp housing had fallen into a hole beneath where the housing was mounted, which was the only issue I ran into when fitting the bulb. Simple solution: use the screw from the old housing. save the old bulb in case!"The bulb comes with a one-year guarantee, which I extended for a reasonable $8.00 for another two years.Very pleased with the purchase and the outcome!The Mitsubishi DLP sets vary in the wattage of the bulbs they use. Better double-check your needs.
4.5/5
Optimized Burner Design Allows any Burn-in Position, Moreover, They Show a Very Stable Light Output, as The High Luminance Decreases Only Slightly Over The Entire Lifetime(between 2500 and 4500 h).
New Generation A+ Lampwick Inside Bare Bulb Make it More illustrious and Clear Enough with The Same Original Functioning.
Models: BL-FU310B, Compatible with OPTOMA EH500 X600 DH1017 DH1014 Projector Lamp Bulb Replacement.
Testing Before Delivery, Excellent Return Service With No Any Condition Within 12 Hours Feedback.
180 Days Warranty 2500 Hours Life.
$234
Many of the many bulbs I've used in my projectors for 20 years are decent ones. I had a terrible one BEFORE this one (if you want to search my reviews you can see that issue). With this one, I was impressed by how well the packaging was wrapped and how well the housing fit when I went to install it. The electrical connections in the socket on the previous one were a little out of place. This one fit like a glove, which gave me a great sense of satisfaction. Colors were vivid and bright when installed; there have been ZERO hours spent using the counter. If there are any problems, I'll update this; if you have any questions, feel free to ask.
4.2/5
Optimized Burner Design Allows any Burn-in Position, Moreover, They Show a Very Stable Light Output, as The High Luminance Decreases Only Slightly Over The Entire Lifetime(between 2500 and 4500 h).
New Generation A+ Lampwick Inside Bare Bulb Make it More illustrious and Clear Enough with The Same Original Functioning.
Models: BL-FU310B, Compatible with OPTOMA EH500 X600 DH1017 DH1014 Projector Lamp Bulb Replacement.
Testing Before Delivery, Excellent Return Service With No Any Condition Within 12 Hours Feedback.
180 Days Warranty 2500 Hours Life.
$234
It was delivered swiftly and performs well. I'm quite happy with how bright it is. It can be installed in a few simple steps, however that has been taken down quickly. The movies can once again be viewed in vivid, colorful, and contrasting pictures. Undoubtedly a lot better option than the more expensive one I will get from my neighborhood supermarket.I must also strongly commend their descriptions and graphics on the pages. Thus, the most crucial advice for us to understand their product thoroughly. Without any hesitation, purchase the bulb with true knowledge of the details!!!
4.1/5
Optimized Burner Design Allows any Burn-in Position, Moreover, They Show a Very Stable Light Output, as The High Luminance Decreases Only Slightly Over The Entire Lifetime(between 2500 and 4500 h).
New Generation A+ Lampwick Inside Bare Bulb Make it More illustrious and Clear Enough with The Same Original Functioning.
Models: BL-FU310B, Compatible with OPTOMA EH500 X600 DH1017 DH1014 Projector Lamp Bulb Replacement.
Testing Before Delivery, Excellent Return Service With No Any Condition Within 12 Hours Feedback.
180 Days Warranty 2500 Hours Life.
$234
I bought this component to replace the one in my Optoma HD-141X. When the previous (manufacturer's) bulb decided to start dimming, it had approximately 2000 hours on it (see photo). Fortunately, I managed to get it out before it blew up.Unit received in customary Chinese postal packaging: Box entirely covered in cellophane tape and covered in black paper to hide any identifying marks. The device was simply identifiable by a label on the outside.The device was clean and well-prepared when it was unboxed. It didn't seem like there were any problems.I didn't feel the need to pull my unit down to just change the bulb because it was already mounted. I'm glad I didn't because replacing it was simple.(1) Loosen the screw holding the cover or plate to the unit's top or side with a Phillips-head screwdriver.(2) Slide or pull the cover plate off to reveal the interior unit.(3) Raise the internal lamp unit's lever or handle.(4) Remove the black self-retaining fastening screw from the light unit's top.(5) Carefully remove the unit from the projector's body; this may require a little wiggle.(6) Unplug the device from the projector's power supply.The procedure for installing a new unit is done backwards. It took roughly 5 minutes to complete the process.The picture quality seems to be on par with that of the original device so far. Without any traces of flare or other optical artifacts, the colors are vivid and strong. I chose not to disassemble the housing to confirm that it was the same bulb because the item was brand-new.If anyone is curious what kind of original bulb it is, it is an OSRAM P-VIP 190/0.8 E20.8.
4.1/5
Optimized Burner Design Allows any Burn-in Position, Moreover, They Show a Very Stable Light Output, as The High Luminance Decreases Only Slightly Over The Entire Lifetime(between 2500 and 4500 h).
New Generation A+ Lampwick Inside Bare Bulb Make it More illustrious and Clear Enough with The Same Original Functioning.
Models: BL-FU310B, Compatible with OPTOMA EH500 X600 DH1017 DH1014 Projector Lamp Bulb Replacement.
Testing Before Delivery, Excellent Return Service With No Any Condition Within 12 Hours Feedback.
180 Days Warranty 2500 Hours Life.
$234
Before purchasing my second Epson bulb from the supply of EWO, I had my first one changed. My initial replacement cost $119. Although it functioned, I sometimes had trouble seeing the image. The woman who guided me online in understanding the qualities of a bulb. After changing the new bulb, the moment I turned on the projector, I noticed a difference in the visual quality. Definitely justified the additional cost.Both my wife and the kids make remarks about how big of a difference the new bulb has made. We are overjoyed with this purchase. The 3D is quite noticeable.
4/5
Models : fit for Benq W1070 W1080st W1070+ HT1075 HT1085st i700 MH680 TH680 TH681 MH630 Projectors Lamp Bulb
New Generation A+ lampwick inside bare bulb make it more illustrious and clear enough with the same original functioning.
EWO'S 5J.J7L05.001 5J.J9H05.001 5J.JAH05.001 Projector Lamp with Housing for Benq Replacement Bulb
Testing Before Delivery, Excellent Return Service With No Any Condition Within 12 Hours Feedback.
180 Days Warranty 2500 Hours Life
$234
My BenQ W1080ST's bulb had died twice before, and this time I understood to replace not just the bulb but also the housing that it was in. The projector had been a little jostled after a cross-country transfer, with the bulb being the biggest casualty.Despite buying a refurbished/returned bulb, I received everything I needed in a carefully wrapped package (Cardboard box, Air packing, and bubble wrap). For such a delicate object, the packaging was incredibly well-treated.Installing was really easy. To remove the projector's lid, just unscrew one screw, undo one screw on the bulb housing, and pull the bulb housing out by the handle. With the new bulb, simply reverse these procedures, and you're done!Once more, an excellent image is produced by the projector's nice, bright illumination. I'm pleased with how the colors came out. There don't seem to be any problems at all. The next time our bulb needs replacement, I'll most certainly come back here to look.
3.6/5
new
Generic replacement lamp
Compatible
$234
By acquiring this tiny gentleman, I made a $400 savings. If your TV is a compatible model and you're not sure if this is the problem, this is almost certainly the solution. I simply pulled out the projector bulb, inserted this thing till I heard or felt it snap into place, closed the side door, and my TV was mended and I'm ready to go for another 10 years. I opened the slide door on the side of my TV coincident with these matching model numbers. I'm so happy I didn't get rid of my TV and spend money on a new one when I had this choice.P.S. This was made so simple to accomplish and helps both my money and my confidence! I am a female who has never mended any electronics in my life. Thank you a million times, Sony, for producing TVs that can last much longer than the majority of models do today.
3.4/5
Generic replacement lamp
Includes 150 Days Warranty
Fast Shipping
$234
As someone else mentioned, it wasn't difficult to remove the safety screen from my old vehicle and install it on this one. There have also been further reports of a distinct burning plastic scent. I immediately turned it off, gave it a quick inspection, and decided it only required a burn-in period. To cycle it, I ran it for a little while, let it sit for a little while, and then ran it again. Unless you stand directly next to it, the smell is gone.In addition, as others have noted, it begins black, becomes a little lighter, darkens again, and then gradually becomes normal. This will work quite great for the price, unlike the more expensive $175 manufacturing ones that appear to be instant. I placed an order for a $175 one just in case this $20 one fails. But at least I got this in two days rather than two weeks.I'm happy with it thus far and will keep you posted on how long this lamp lasts. After the original lamp that came with the TV lasted five years, I already replaced it once for $175, and that one lasted three years.
3.3/5
WD-60735,WD-60737,WD-60C8,WD-60C9,WD-82737,WD-82837,WD-56737,WD-65735,WD-65736,WD-65737
Brand new high quality replacement bulb,Brighter & sharper picture
30 day money back guarantee,90 day replacement warranty
WD-65835,WD-65837,WD-65C8,WD-65C9,WD-73735,WD-73736,WD-73835,WD-73C8,WD-73C9,WD-73737,WD-73837
Compatible TV models:
$234
I bought this last week for my 65-inch DLP; the last time I changed the bulb was in December 2012, six years ago, using this lamp ballast. The quality is the same as units that cost 2-3 times more, yet the price has really decreased by 40%. Ordered around 7am; delivered before 7pm; took less than 5 minutes to replace; even purchased the 4Y warranty for $2; all in under $45 compared to 25X more for a new 65in that will most likely burn out in 5 years or less; cannot be repaired for less than $50, same day w/o a technician; and is not replaceable for less than $50!
Yes, sunset lamps can help with depression. The light from the sunset lamp can help to stimulate the production of serotonin, which can improve mood and alleviate depression.
The average lifespan of a projector lamp is between 2,000 and 4,000 hours. If you find that your projector is starting to dim or the image is beginning to degrade, it's probably time to replace the lamp.
A projection lamp is designed to last for a certain number of hours. This lifespan can vary depending on the brand and model of the lamp. Generally, a projection lamp will last for between 1,500 and 3,000 hours.
The cost of replacing a projector bulb will vary depending on the make and model of the projector. However, most projector bulbs can be replaced for between $50 and $200.
A projector lamp is not the same as a bulb. A projector lamp is a specialized type of light bulb that is used in projectors. Projector lamps are made with a specific type of glass that is designed to withstand the high temperatures that are produced by the projector's light source.
COPYRIGHT © 2019