Yes, chickens can drink rusty water. However, it is not recommended as it can lead to health problems.
There is no scientific evidence that copper pennies prevent algae. However, some people believe that the copper in the pennies can help to control algae growth.
A ping pong ball does not stop water freezing. The ball will float on the surface of the water as it freezes and will not prevent the formation of ice.
Vinegar is an effective algaecide and can be used to prevent and remove algae from surfaces. It is safe to use around plants and animals, and is a natural and inexpensive way to control algae.
4.6/5
✔ AUTOMATED - This horizontal chicken waterer is designed to work like a water dispenser. It will release water only if the steel rod is triggered by the flocks and then shuts off whenever no bird is striking into it. All you need to do is refill the bucket/container whenever water is runs out. 5 gallon of water will be enough for a week or more depending on the number of flocks that you have on your poultry farm or coop.
✔ HASSLE-FREE FOR THE POULTRY - The birds prefers this horizontal poultry nipples over the vertical type and watering cups as it provides more convenience in accessing and drinking the water from its container. The steel rod is easy enough to push that even 2 week old chickens can do it with less to no effort at all.
✔ DURABILITY - This poultry waterer nipples is made with top-of-the-line plastic and steel materials and are assembled thoroughly to make sure the quality is the best and that the product will last for many seasons.
✔ RISK FREE MONEY BACK GUARANTEE - We are sure that your chickens will love this horizontal side mount chicken nipples that if you are not absolutely satisfied with this we'll replace it or refund your purchase. Providing you the best customer service. BEWARE of counterfeit and fake sellers, Cruzadel is the exclusive distributor of Cruzadel branded products.
✔ EASY TO INSTALL - It is so easy and quick to setup this nipper drinker as all you need to do is drill a hole on your container and screw in the Cruzadel horizontal poultry nipples. The only thing you'll need for installing the watering nipples is an 11/32 drill bit. The nipple assembly screws right into your container, so additional tools will NOT be necessary. The package includes product instruction and tips on what works best for these nipple drinkers.
$234
Since nothing connected to poultry is as inexpensive and simple, I was a little hesitant to purchase these. I have two 4-5 gallon gravity waterers that work, but I have to clean them once a week because the hens kick dirt into the water, and with time, algae will start to form in the space between the water barrel and the tray, giving the water a swampy odor. You may use a neat cat bucket, like I did, or a $3 bucket with lid from the hardware store for these. I had some Marine Goop sealant ready just in case, but I didn't need it because I assumed that water would inevitably leak out. One chicken only needs to discover the nipple for the others to follow. My curious fowl had found out this new method of drinking in less than 30 minutes. The chickens now receive clean water with every drink, and as an added plus, I've removed the water free-for-all for the mice who have started appearing (this is a whole other battle). In any case, this has been the simplest and cheapest thing I've ever done for the chickens. I shouldn't waste as many gallons of water each week, plus I no longer need to drag a 40-pound bucket of water back and forth to the coop.
4.5/5
📠Turn your cooler, PVC pipe, 55 gallon rain barrel, 5 gallon bucket etc. into a highly efficient chicken waterer.
📠We suggest one nipple per every 4 chickens / poultry.
📠Comes with installation helpers as well as simple yet effective instructions.
📠Works perfectly for chickens aged 2 weeks and older.
📠No more hanging your waterer and no more daily water bucket cleaning - Your completed waterer will also be able to be placed directly on the ground for refilling and cleaning.
$234
Never before have I seen a product beset by so many foolish people's unfavorable reviews!These are wonderful, affordable, and simple. They are fundamentally considerably more leak resistant than vertical nipples and don't freeze as easily. However, you must exercise caution when installing them:- I would (and have) used a 5/16" drill bit rather than an 11/32" drill bit to make the hole in thin-walled plastics. It will seal more firmly.- Definitely use 11/32 on thick-walled plastics (PCV or HDPE buckets). Since I lacked an 11/32" bit, I simply used a 5/16" drill bit to insert the screws only halfway. Despite its absurd appearance, it works just fine unless it is below freezing. If they are not fully screwed into the plastic, they will frost up extremely rapidly in freezing temperatures. Since then, I've purchased an 11/32" bit to address this issue.- NEVER put Teflon or silicone tape on these (or any nipples). If you have a leak, you've already made a mistake, and using these techniques will only make your leak problems worse rather than fix them.- Make sure your material has an adequate diameter. Your pals are flat(ish) walls. Anything less than 3" PVC is too little for me to utilize this on.- MOST IMPORTANT: Avoid under- or overtightening! Each will result in leakage!Use of the "installer" utility is not necessary. tighten manually. Just get everything threaded and loosely secured. then completely fill your container (very important). It ought should leak, of course. Have a cloth on hand. Now progressively tighten the nipple by hand. Use the rag to frequently pat dry the nipple. While keeping an eye out for leaks, continue tightening and drying alternately. The minimum tightness that prevents leaks is the correct tightness. It will probably be far less than you anticipate. Six waterers were created by me using both vertical and horizontal nipples. Never once have I experienced a leak. But I've also never tightened them with anything other than my fingers.Last but not least, these are not for young chicks. These men have hard springs. According to the manufacturer, chicks should be at least two weeks old. Before ours actually grasped them, I believe they were four weeks old (we started introducing them to horizontal nipples at two weeks). On their first day, the chicks did learn vertical nipples in a matter of minutes.Happy watering of the hens!
4.4/5
Great for 80 Degree days - Hens can dip their wattles in cup of water
Use a 3/8" drill bit to create holes, 1" above the base of the bucket or use 5/16ID + 7/16OD tube
An amazing solution for clean water for ducks, geese, turkeys etc.
Water flows automatically without tabs to push - The cups are always half full -
$234
I was at my wits' end after purchasing three different kinds of nipples (hmm...anywhere else and that remark would sound pretty odd) - and having all of them fail. The days I forgot to put out a bowl of water for my chickens resulted in them being dried-up little nuggets because there was nothing else I could do but leave the hose running all day (having twice flooded my basement, the insurance company offered me the ultimatum of getting rid of the chickens or getting rid of the hose).These tiny cups are brilliant—perhaps not Buckminster Fuller brilliant, but definitely lower-level brilliant (perhaps Brainy-Smurf or one of the students in the back of the class in the Harry Potter films who ends up getting like pretty good grades, but nobody notices him, and he also doesn't have to have those wand-fights).To insert these, simply drill a hole into the object you are using to hold liquid. I should make it clear that you shouldn't drill holes in simply "anything," such as glass. Drilling is not permitted near human body parts. Even Bear Grylls couldn't extract much liquid from drilling into dirt, so I guess don't bother.Simply drill a hole in a bucket and insert the tiny cup through it. Let the birds drink water from the bucket as they please.Alternately, add Gatorade to the bucket before emptying it on top of the MVP chicken. They'll all crow and flap their wings, but that one bird will secretly enjoy all the attention because, well, MVP, right?Your hens will begin performing dangerous acts if you fill the bucket with Mountain Dew or Monster Energy (and they may get pretty mouthy...I may not be able to forget some of the hurtful things that Princess Buttercup said to me)Anyway, just buy these things and follow the instructions that they come with (they'll make you seem smarter; unless you just read all of this, in which case the dumber/smarter will just cancel each other out, and you'll just have the same level of intelligence before you bought/read; hopefully smarter than that smug smurf, anyway). Don't read any of this.
4.3/5
🤠DRILL BIT INCLUDED for Easy Installation
🤠OASIS CUPS ARE LARGE - Nearly 3 Inches in Diameter
🤠INCLUDES: 4 (Orange) Cups with Mounting Hardware, Drill Bit, Instructions, OASIS Sticker *** Bucket Not Included ***
🤠Developed and Manufactured by BACKYARD FLOCK, USA
🤠SIMPLE AND RELIABLE - Fully Automatic. No float tabs. No triggers to peck.
$234
Since we installed the watering cups, they have performed as promised and, more significantly, have not leaked. In contrast to the nipple method, which we had previously used and which frequently leaked, the hens quickly became accustomed to utilising the cups. They're chickens, after all, and the word "chicken" is used for a reason. Without a doubt, they are worth the money and function excellent. Of course, that depends on how long it lasts, so if there isn't a bad follow-up to this review in about 6 to 12 months, it means they've done a great job and there aren't any complaints or remarks that contradict the statements made earlier.
4.2/5
ðŸ“Elbow can be installed in larger recipient when 1L is no longer enough.
📠Water flows automatically without tabs to push - The cups are always half full - Watch video to see how it works
📠An amazing solution for clean water for chickens, ducklings, qualis, game birds, etc.
ðŸ“Watch the Video
$234
After suffering with continuously contaminated water for the previous two weeks, I was putting all of my trust into this waterer until I received it yesterday.This product does not let you down. Since I use a Rubbermaid container, I drilled a larger hole beneath for the attachment piece to fit through after drilling a couple of smaller holes to put a string through (for something to hang the bottle on). I simply inserted the attachment through the opening and twisted the bottle onto the attachment from the opposite side. It was quite simple and has held up well.The water is pure, and the chicks learned how to do it quickly. adore it
4.2/5
Jar and base are also sold individually (Item Nos. 666 and 750)
Red plastic base
Easy-fill screw-on design
Jar is molded from durable transparent polyethylene so the water level is always visible
Complete gravity-feed poultry waterer with 1-gallon capacity
$234
Chicken okayed. When we put it in their coop, the girls immediately went for it since they adore it. I don't anticipate the ladies causing any damage to the container or the fill area anytime soon because the material utilized is lovely and substantial. They have already begun picking at the top, although no scratches have yet shown. The red portion fills slowly and won't overflow because there is just one area for the water to exit. It is simple to fill the container and turn it over without any water spilling.Benefits: As was already said, the fill basin won't overflow.Very simple to fill and screw on the top.When shavings or dirt get into the basin, it is simple to turn the entire thing on its side to drain out the spoiled water. New water then fills the basin, wasting very little water in the process.plastic that is durable.Our two hens use the gallon reservoir for 4-5 days (including cleaning out every other day or so)Cons: When fully loaded and flipped over so the hens can drink, it becomes a little heavy. Every night, we relocate it inside their home because it is a little difficult to pick up with one hand.You can see from the photos that there is no danger of our tiny ladies drowning themselves or anything like. I adore it, and so do our hens. Simply fill and depart. simple and effortless
4/5
Hinged lid for easy access filling
Additional cups may be added for larger flocks
Helps inhibit algae growth
Delivers constant supply of fresh water
Made from food grade BPA free plastic
$234
I had to use it right away, so I had to spend an additional $10 to buy the missing cups and attach them myself. I would have had to go through the hassle of returning the waterer and waiting for a new one if I wanted to get it changed for free, which is why I only gave it 4 stars. The waterer, on the other hand, is fantastic; it works well, and the chickens adapted to it very quickly. In order to easily fill it without entering their coop, I have mine put on the outside of my coop with the cups going through the wire.
4/5
100% risk free money back guarantee
Works with chicken nipples or chicken watering cups that have 1/8" MPT Threads
Allows easy installation of your chicken waterer sysyem. No drilling and worrying about leaks.
Reducing tee Sch 40 PVC 1/2 Slip " X 1/2 Slip " X 1/8 " FPT white
Value pack of 12 pvc tee fittings
$234
When I discovered these pre-formed PVC tees for the chicken waterer nipples, I was overjoyed. Compared to the previous method of trying to drill holes in PVC tubing, it makes construction so much simpler. Those fittings appeared to leak continuously. I apologize for the sloppy images, but we're talking about chickens here. I'd unquestionably suggest them to any chicken keeper!
3.4/5
Provide Water for Chickens?When chickens peck the yellow trigger, the chicken waterer valve automatically releases water into the plastic cup. Provides clean water to chickens, and doesn't waste water.
Save time for farmers : Don't Need To Fill Water Every Day With poultry watering cups drinkers.
Easy to install and keep clean.The chicken drinker cups can be easily installed in the side or bottom of a bucket. The cup stays clean and provides low maintenance.
Your chickens want you to buy poultry water drinking cups bowls.Your chickens are thirsty and want you to buy these poultry drinking cups so they have a constant, automatic supply of fresh water.
The automatic chicken waterer cups made of high quality plastic material, tough and durable.
$234
After reading the reviews and realising there wouldn't be any directions provided, I became a little anxious. All of the parts from the order were delivered to me in whole. To make my guides, I used a 21/64 drill bit to drill into the bottom of the sides of two buckets. I then applied pressure when I screwed the bowls in. Each and every one performed flawlessly. I arranged a bottom bucket with four bowls for the hens and a top bucket with six bowls for the goats. Everyone quickly grasped the solution. I have no complaints, thank you.
If you have chickens, you know that fresh water is essential to their health and well-being. But in winter, when temperatures plummet, it can be a challenge to keep their water from freezing solid. If you don't have electricity to run a water heater, there are still ways to keep your chickens' water from turning into an icy block. One way is to use a double-walled water bucket. This type of bucket has an inner and outer layer, with a layer of insulation in between. The insulation helps keep the water inside from freezing. Another way
To prevent algae from growing in a chicken waterer, it is important to clean the waterer regularly and to keep it in a shady area. Algae need sunlight to grow, so by keeping the waterer in a shady area, you can prevent algae from growing. Additionally, it is important to clean the waterer regularly to prevent algae from growing.
Chickens need access to water at all times, and their water cups should be filled to the brim. However, you don't want the water to be too deep, as this can make it difficult for the chickens to reach the water. A good rule of thumb is to fill the cups so that the water is about an inch deep.
A five gallon bucket of water will last a flock of four chickens for about two days. The chickens will drink a little over a pint of water each per day.
If you have 20 chickens, you will need 2-3 waterers. Chickens typically drink about 1/4 to 1/2 cup of water per day, so you will need to refill the waterers every few days.
You should clean your chicken waterer at least once a week. More often if it is very hot or dusty.
COPYRIGHT © 2019