Best Ice Cube Molds & Trays in 2022

Last update: December 20, 2022

Are silicone ice cube trays any good?

Silicone ice cube trays are great because they are durable, easy to clean, and don't absorb flavors. They are also flexible, so you can pop the ice cubes out easily.

Are silicone ice cube trays easier to use?

Yes, silicone ice cube trays are definitely easier to use than the old plastic ones. They are more flexible so you can pop the ice cubes out more easily, and they don't get as cold so your hands don't freeze when you're trying to fill them up.

Are silicone or plastic ice cube trays better?

There are pros and cons to both silicone and plastic ice cube trays. Silicone is more expensive but is easier to clean and doesn't retain smells. Plastic is cheaper but can be more difficult to clean and can hold onto smells. Ultimately, it comes down to personal preference.

Can you freeze ice in silicone molds?

Yes, you can freeze ice in silicone molds. The silicone material is flexible and durable, so it won't crack or break when the ice expands as it freezes. The molds can also be easily removed from the ice once it's frozen.


Souper Cubes Extra-Large Silicone Freezing Tray with Lid - 2 pack - makes 8 perfect 1cup portions - freeze soup broth or sauce Review:


Purchased these after admiring a meal prep page user's immaculate freezer. It appeared as though someone constructed a Lego wall in their fridge. A gallon ziplock bag holds 8 cubes, however my husband can only fit 6.Due to the cost and my desire to not have another item in my kitchen, I waited a little while. I mean, I still have the 1995 cool whip empty containers, and they still function.I couldn't stop thinking about them, so I ultimately bit my tongue and bought two of them. Thank goodness I did! Even my sourpuss spouse, who was first upset that I got "ice cube trays," has fallen head over heels.We still haven't even put these stuff away after almost a month. We've cooked mac



Kitch Ice Tray Easy Release White Ice Cube Trays, 16 Cube (Pack of 2) Review:


I was worried that my 22-year-old SubZero Model 550 refrigerator was about to fail when the icemaker suddenly stopped working after shorting out its dedicated circuit breaker. But no, and I sincerely hope I'm not jinxing myself here, everything else continues to function normally. Therefore, I spent a few dollars on these excellent ice trays rather than spending $10,000 to replace it (which I would never do), $3,000 to buy a good knock-off (which I also didn't want to do), or $800 to replace the icemaker and a few other cosmetic parts (as estimated by an authorized repair technician). Seriously outstanding The cubes are excellent in size, superior to any automatic icemaker's output, manufactured with Poland Springs from my kitchen water cooler rather of the disgusting town water that runs through the fridge filter, and #3 melt more slowly in my drinks. I had enough room for all four of these, stacked two by two, with the freezer on the bottom. The cubes pop out with just a simple twist, leaving no residue, plastic odor, BPA safety issues, or any lingering aftertaste from other foods. It's also incredibly simple to store the cubes and make more, keeping the container full to my heart's desire because I still have the ice container in the freezer. These are the tools to use if you have to produce your own ice.



Rubbermaid 4 Easy Release Ice Cube Tray (4-PACK), White Review:


I recently moved into a brand-new townhouse without an ice maker in the refrigerator. I had to think of a way to have ice cubes on hand. I experimented with a few various methods and was shocked to discover that using these tried-and-true ice cube trays was the best course of action.Having issue with the ice cubes easily popping out of a couple store-bought models made of silicone or a thin rubber, These plastic trays were something I recalled using as a child in my parents' house many years ago. I did a little searching to see if there was anything similar, and sure enough, Amazon had them. Without thinking twice, I placed my order, hoping they would function as easily and efficiently as I had recalled.I piled them in the freezer after filling them with purified water. These trays stack quite readily because they are made for it, which is convenient. The cubes were easy to remove from the tray with only a slight twist and a quick pour into the plastic bin that I had also ordered. This was as simple as I recalled and far simpler than many of the more modern ice cube trays I purchased from the neighborhood shop, where I occasionally had to pry the cubes out. I couldn't believe that the traditional ice cube method was the simplest. To be honest, I'm not sure how they've been able to advance ice cube technology so little over the years. Something that easy shouldn't be challenging, in my opinion.The bottom line is that if your fridge doesn't have an ice cube machine, acquire these trays to avoid annoyance and mess with the other ones. These are still flawlessly functional now as they were 40 years ago. They are outdated, but occasionally that is better.The highest endorsement.



Tovolo Colossal Leak-Free, Anti-Tip, Silicone Cap, Cube Ice Mold, 2.25 Inch Cube - Set of 2 Review:


I just started drinking single malt Scotch from The Macallan. I was browsing their website for products when I came across an ice sphere press and knew I had to have one. The price tag is the issue. The one offered by Macallan costs 650 Euro, or around $843 at the current currency rate. All other ice sphere presses I've found have been between $500 and $1500. After thinking there had to be a better choice, I came across these.These molds for ice balls function flawlessly. Use in accordance with instructions to obtain a 2.5 that is nearly flawless "each time an ice sphere. constructed from food-grade materials, durable, and good. If you use filtered or heated water, your ice will be clearer. You could also add fruit and fill the molds for presentation if you'd like.I used two spheres to chill a fairly large cafe latte this morning. Ordinarily, I would almost completely fill the glass with standard ice and then add extra ice halfway through because the first batch melted. These spheres functioned flawlessly. There was barely any dilution of my espresso, and when I was done, I still had 2 quite large ice spheres in my glass, which I could have used for a refill. These innovations are simply wonderful! When you can get these for less money, I don't understand why someone would ever pay $500 to $1500 on a press. These are ideal for chilling booze or any other beverage you want to keep from diluting.A user gave this product a rating of two stars. If you truly read their review, you'd realize that they are a complete moron. If the 2.5 "Use a different glass if the ice sphere won't fit the one you have. Put the ice in first if you don't want your beverage to splatter. It makes perfect sense.



Large Cube Silicone Ice Tray, 2 Pack by Kitch, Giant 2 Inch Ice Cubes Keep Your Drink Cooled for Hours - Cobalt Blue Review:


I was hesitant to make this buy after reading several reviews, but I reasoned that they were inexpensive enough that the risk was small. In the end, I am content with the outcome and have no regrets.I have not yet noticed any of the odours that other people have described, but I did notice a residue on the water's surface. I completely hand washed the trays as soon as I received them after reading other people's reviews. I became aware of the buildup on the water's surface after the initial cleaning. The water was then added to the trays, which were then permitted to stand at room temperature for around 30 minutes. After draining the water, a whitish residue was left behind. The residue was removed using a paper towel. Since then, despite the trays being replenished nearly every day for the past month, I have not noticed any residue in the trays or on the water's surface. A Zero water pitcher is used to fill the trays with water.



glacio Ice Cube Trays Silicone Combo Mold - Set of 2, Sphere Ice Ball Maker with Lid & Large Square Molds, Reusable and BPA Free Review:


Since they are Ice Cube Moulds, I didn't anticipate having much to say about them.As usual with Amazon Prime, they arrived quickly and in good condition. I was pleasantly surprised to see how thick the silicone is when I first opened the box. Compared to what I spent, the quality feels more expensive. Although the listing claims a 2" cube, the cubed tray was deeper than I had anticipated, and I was still in awe of its impressiveness. You get the little satisfaction of serving a drink of the same caliber as one from an upscale wine bar when you put one of those cubes into a glass, add some of your preferred spirit on top, and then hand it to a friend. The eye provides the initial flavor.Again, I wasn't expecting too much with the sphere mould. But once more, I was mistaken! The caliber is present! they feel wonderful. You can tell that the mold has become one piece because the top section fits snuggly into the bottom half. You slowly pour water into the spheres through the top-most hole until they are completely filled. I had a small spillage settle on the top of the mold, but it is simple to pour off the excess without losing any water from the spheres themselves, which is wonderful... I was impressed.It did take longer for the ice cubes or spheres to develop because of the thickness of these moulds, but that is a tiny price to pay and nothing a little more preparation time couldn't fix. Simply peel back the silicone mold to release the ice cubes, and it couldn't be any simpler to remove them. We've all experienced this: bashing an ice cube tray against the kitchen counter only to get one meager cube in return.Excellent product; I heartily endorse... especially if you're having people over for supper.



3D Skull Flexible Silicone Ice Cube Mold Tray, Makes Four Giant Skulls, Round Ice Cube Maker, Black- Pack of 1 Review:


I limited my options to a set that produced 12 cubes or spheres at a time, some ice death stars, and some ice skulls. The most accurate and thorough product description and images were found on Skulls. I'm speechless at how awesome they really are. Despite careful washing, the first batch still had a silicone flavor; the second batch had no flavor at all—just ice. Prior to the second cycle, I ran a second wash. It can be a bit challenging to get the two parts to lock together, but since the bottom and top molds, respectively, represent the front and rear of the skull, you'll always get a flawless face, or you can manufacture only the faces if you want.I'm not sure if I would have been prepared to shell out the cash for a 12-skull version, but now that I'm generating 4 skulls at once, I'm likely to purchase at least one more. The freeze cycle is so lengthy that if I perform one in the morning and one in the evening, I will realistically be limited to two cycles every day. At eight ice skulls per day between two people in Arizona, I don't think I'll be able to accumulate much of a stockpile. To achieve three or more freeze cycles, I would have to reorganize my day, and I'm not about to do that.You don't have to worry about spilling between the sink and freezer or bumping them before they are frozen because the fill time is roughly the same as with regular ice trays.



Ticent Ice Cube Trays (Set of 2), Silicone Sphere Whiskey Ice Ball Maker with Lids & Large Square Ice Cube Molds for Cocktails & Bourbon - Reusable & BPA Free Review:


Ice balls can be created if everything is put together with extreme care. It's difficult to get them filled. The only way to fill them is to also fill the top of the mold, thus I wish there was a drain on the mold cover.In a bourbon, the mold line (horizontal) typically melts off quite rapidly. Getting rid of ice balls? Fuggedaboutit. The engineering difficulty might be to create an environment where the ice freezes from bottom to top and there is a lot more ice/water on top of the ice ball so that the ice ball would freeze more slowly and drive the air and other impurities out of the top of the ice ball. I believe that most frequently produces ice balls that are mostly clear (compared to current offering). The majority of your pitches would be nice and clear, even if you ended up throwing a lot of "scrap" ice.



Ice Cube Trays, WETONG 2 Pack Silicone Ice Cube Molds with Lid Flexible 74-Ice Trays BPA Free, for Whiskey, Cocktail, Stackable Flexible Safe Ice Cube Molds Review:


I was hesitant to buy another ice silicone cube mold because my girlfriend's previous one shattered, but then I saw this one. Since this mold is flexible, you can bend it like the old-school ice cube trays without breaking it, unlike the ice cube tray I damaged, which only had a silicone base. The cubes' shape appeals to the kids, and they like popping them out of the molds. Additionally, because it is smaller, the ice blends in the blender much more effectively than regular molds.The purpose of the lid is unknown to us because the package's instructions were missing. There is just one lid, and I didn't want to attempt to use it on both water trays as it was originally packaged. The parcel fit in my mail box, came on schedule, and was unharmed.



OMorc Ice Cube Trays 4 Pack, Easy-Release Silicone and Flexible 14-Ice Trays with Spill-Resistant Removable Lid, LFGB Certified and BPA Free, Stackable Durable and Dishwasher Safe Review:


These trays were bought for our holiday house. They have only maybe been used for 8 weeks while spending the rest of the time in the freezer. Simply from gripping the trays while attempting to pop the cubes using the soft silicone bases, two of the four trays I bought are damaged. The white plastic is quite thin and becomes brittle when frozen.The second criticism is that, in contrast to other trays, they are made to nest rather than stack. This uses freezer space in a very wasteful manner. I stack my less expensive, non-silicone trays.For the simplicity of the silicone pop-out convenience, I could live without the stacking, but the lack of durability makes these a bad purchase decision.An update: The seller gladly offered to replace the original set and then followed their word, demonstrating real attention to exceptional customer service. As a result, I updated my rating from 1 to 5 stars because I always value excellent customer service.


Do you put ice on top or bottom of cooler?

Does adding salt to ice make it colder?

Adding salt to ice can make it colder because salt lowers the freezing point of water. This means that the ice will melt at a lower temperature, which will make it colder.

Does adding salt to water make ice last longer?

Adding salt to water can make ice last longer because salt lowers the freezing point of water. When salt is added to ice, it causes the ice to melt. The water that is created is salt water, which has a lower freezing point than fresh water. This means that the ice will take longer to freeze in salt water than it would in fresh water.

How do you get ice cubes out of silicone trays?

How do you keep an ice cube from melting for 8 hours?

How do you make clear ice cubes in silicone molds?

To make clear ice cubes in silicone molds, fill the mold with distilled water and place it in the freezer overnight. The next day, remove the mold from the freezer and let it sit at room temperature for a few minutes. Then, use a blunt object to tap the mold and release the ice cubes.