A bore snake is a tool that is used to clean the inside of a gun barrel. It is a long, flexible rod that has a brush or other cleaning agent on one end and a handle on the other. Bore snakes are available for a variety of different firearms, including AR-15s. To use a bore snake on an AR-15, first make sure that the gun is unloaded and the safety is on. Insert the rod into the barrel from the breech end and run it through the length of the barrel a few times. Be sure to keep the rod straight
Do bore snakes need to be cleaned? No, bore snakes do not need to be cleaned. They are self-cleaning and will clean themselves as they are used.
9mm snake shot is a type of ammunition that is designed to kill snakes. It is a small caliber round that is fired from a handgun. The round is filled with lead pellets that are designed to spread out upon impact and kill the snake. There are many different brands of 9mm snake shot available on the market, and they all claim to be effective at killing snakes. However, there is no scientific evidence to support these claims. In addition, 9mm snake shot is illegal in some states.
You can use a bore snake as many times as you need to until it starts to show wear. At that point, you'll need to replace it.
4.8/5
TRUSTED: Unconditional Warranty & supported by our US Support Team. Let us know of any issues or questions.
PROFESSIONAL: Packaged in clamshell. Beware of competitor products which are packaged in zip baggies. Don't be embarassed when gift giving!
REUSABLE: Solvent Safe, Machine Washable & Reusable Hundreds of Times
COMPACT: Lightweight and compact - fits easly into your pocket, to assure it's always ready
QUICK & EASY: Cleans in 1 quick pass! Pre-scrub solution can be applied first, Brushes then scrub the barrel; cleaning cloth cleans-up, and remaining length can apply any lubricant you wish - all in a single pass!
$234
It worked and behaved in the same way as my Hoppes bore snake, and it did so admirably. I purchased a handful of them in various calibers since the price was too good to pass up. After a day at the range, all of the cleaners worked admirably, and I had a number of clean barrels at my disposal in no time. The procedure is straightforward: I put a small amount of Hoppes # 9 on the bristle portion, feed the snake in by inserting the thin brass end first, pull the entire cleaner through, then repeat the process one or two more times. I observed that sometimes it can be challenging to draw the snake through, but I think that is just the nature of these cleaners because the Hoppes brand snake I own is no easier to pull through. Overall, I am really happy with this purchase and would suggest it to anyone who has never used a bore snake or who has a variety of calibers they want to obtain snakes in without spending a lot of money.
4.7/5
The world's quickest three-step bore shine
Machine washable
Brass weight on the pull cord is stamped with the size
Extremely packable
Patented one-piece design
$234
To clean 12 gauge hunting rifles, I purchased this.You are truly missing out if you haven't tried a BoreSnake. The rope-patch portion and brush combo work so well together. They may be cleaned and used again.These are highly suggested in all of the calibers you frequently shoot. It simplifies cleaning.You just need to drop the tiny weight on the end of the black string through the barrel's throat and grab it as it leaves the muzzle if you're curious how it works (put it in back by the trigger and pull it out where the shot comes out). The brush will then enter the barrel when you just pull on the black cord, followed by the soft rope. I was a little concerned about how strong this black cord would be, but I can pull it with no problems. You have created the equivalent of one brush and patch pass-through if you pull it all the way through. You should be almost done if you repeat that process several times and then apply a fresh patch. The Hoppe's No. 9 Powder Solvent, 5 Ounce Clam E/F, should not be forgotten.
4.6/5
QUICKLY CLEANS FOULING FROM YOUR BORE: when you pull out your Bore Boss it is neatly wrapped up to ensure you don't spend time untying knots so you can quickly clean after a day of target shooting
GET A GRIP AND EASILY PULL WITH THE ERGONOMIC HANDLE: The Bore Boss pull through kit has an ergonomic grip that helps you comfortably pull the tight-fitting cable through your revolver, striker fired or any handgun.
SNAKES DON'T COMPARE: Add the Bore Boss to your list of favorite pistol accessories. It is a portable, compact, quick clean field tool that is an excellent gift for any gun owner who likes quality tools.
SINGLE PASS CLEANING SOLUTION FOR .357/.38/9MM/.380 HANDGUNS: Flip, clip, feed, pull. The 12-inch cable works for cleaning your 9mm, 357, 38 or 380. Cleaning has never been so fast, clean and easy.
SEE YOUR CALIBER AND PROTECT THE BRUSH AND MOP: The storage case has large caliber labels so you can id your cleaning supplies. Plus, the case keeps the brush from grabbing fabric or poking you, it keeps the mop clean, and your range bag organized
$234
Change the game! I need to color-code and store my bore snakes in Tupperware because I have so many of them. It is difficult to keep them apart and deploy them. These are far superior, and they don't take up much room in your BOB. Just the size of a hockey puck, it is small enough to fit in any range bag. Despite its diminutive size, it is formidable. It includes a built-in handle that makes it easy to draw through your barrel without getting your hands dirty and combines the functions of a bore snake and a bore brush. The flip away storage concept, which is incredibly simple to install and store, is the actual game changer. Because of its portability and convenience of use, I used to be a major admirer of the Remington Squeeg-e system, but I now exclusively carry these!The only drawback I can think of is the requirement for a unit for each caliber you own. The Remington Squeege mechanism simply requires a head change. However, the Squeeg-e has a tendency to spray oil in your face or onto walls. That is a serious drawback and a deal-breaker. This is the device to purchase.
4.6/5
ã€SOLVENT COMPATIABLE】The nylon bore cleaner absorbs gun cleaning solvent well and there is no exposed metal to damage sensitive rifling or crown.
ã€CLEAN IN ONE QUICK PASS】The bore cleaner scrapes gunk out of the barrel and follows with a smooth cloth to wipe it clean and lubricate in one quick pull-through. Note: Each item includes 2 bore cleaning snakes for .22 .223Cal & 5.56mm.
ã€WELL-DESIGNED】1. Brass weight slips easily through barrel. 2. First floss area removes foreign particles prior to the scrubbing action of the brush. 3. Bore brush embedded in the cord loosens hard deposits. 4. Main floss area with 160 times more surface area than a “patch†cleans like no other product.
ã€LIGHTWEIGHT and COMPACT】 You can roll a snake up in your pocket in the field and then run it through a couple of times to remove fouling quickly. It is great application for the military and recreational shooting.
ã€MACHINE WASHABLE and REUSEABLE】Make sure that the bore cleaning snakes are ready for proper use the next time you need them.
$234
The golden brush and braided mop on this bore cleaner are all one piece.With one or two pulls, the barrel may be cleaned. Compared to the typical cleaning rod systems, this significantly saves time.You can easily clean your barrel no matter what kind of handgun you have, whether a 1911, revolver, striker-fire, or rifle.It is intended that you drop the cable into your barrel. You drop the brass weight at the pull string's end into the barrel and draw it through. Every time I go back from a shoot, I do this.After a shooting session, some men just pull one through a couple of times, which is OK, but I can't help but run a patch or two of the boar with some cleaner to loosen things up a bit.I'll inspect the bore after pulling the snake through a few times. Before the final surgery, I will occasionally even apply a little oil to the snake. The fact that these cleaners are machine washable is another excellent feature.I simply give mine a bath with dish soap when they become soiled.I have used a similar boar cleaning tool for years and paid far more for it than I did for this one. Whether you're a plinker or a serious shooter, I would strongly recommend these.
4.5/5
Hoppe's M-16, .22 - .223 caliber rifle, den
Hoppe's den includes the original boresnake
Convenient new case for easy storage and Transport
Hoppe's den lid doubles as a pull handle
$234
After we switched to a larger version for the shotgun, I purchased this for the AR. It maintains the bore clean and is much simpler to use than a segmented or solid rod. Compared to the shotgun version, it takes a lot more force to pull through, but the bottle cap it comes in has a convenient fitting that allows it to be used as a pull handle. It is equally as simple to clean as the shotgun version. It may be simply placed in an old pillowcase, tied shut, and washed. Obviously, you should double-check that your cleaning supplies are safe for the washing machine, but many are these days. Even though I still keep a segmented rod in my range bag, I only really use it for cleaning when I get stuck cases or the like.
4.5/5
$234
I previously owned a few typical Hoppe's BoreSnakes in 12 and 20 gauge. They have a huge fan in me! I would strongly suggest a boresnake because they are a *huge* improvement than patches and brushes. The weight occasionally coming off the feed string was the only issue I had with the first BoreSnake. On some firearms, you must also exercise caution to prevent snagging and pulling of the original BoreSnake cloth as it feeds into the barrel.To get the most out of the new model and to have a second (always clean) BoreSnake, I purchased the new BoreSnake *Viper*. I discovered that the Viper's addition of a tapered cone between the feed string and cleaning cloth does lessen the likelihood of a snag, but some caution is still needed to avoid snagging when the fabric length feeds into the barrel. I believe that the larger orange end on the Viper, which is used to administer oil, helps the new model function even better than the previous BoreSnake. VERDICT: I endorse this product. In fact, I've already bought and given away two more as gifts.By the way, the directions that came with mine were not very strong. I drop the weighted feed string through the barrel, walk on it, and lift the barrel after applying Hoppe's No. 9 cleaner down to the brushes and oil to the orange end. works quickly and effectively! I occasionally first run a brush through the barrel if it is extremely unclean or if I did not clean it quickly enough (I know, a sin).
4.4/5
Extremely packable
Patented one-piece design
The world's quickest three-step bore shine
Brass weight on the pull cord is stamped with the size
Machine washable
$234
BoreSnakes are really effective, however you should be aware of potential fakes being advertised on Amazon and shipped from China. Pictures of the 9mm,.380, and.357 cal. BoreSnake are attached (s). The sports goods store where the one with the white tag was bought was a big-box nearby. The other was sent to me from China through Amazon. variances in length and the presence or absence of etching on the brass weight. Most likely still functional, but who wants a (possibly) fake?
4.4/5
RELATED: boresnake, bore snake, gun cleaning kit, firearm maintenance, shotgun, rifle, handgun
SAVES TIME: One pull of our gun cleaning kit takes the place of rod,brush and patch.Cleans gun bores within 10 seconds, save you a ton of time.
OUR GUARANTEE:If for any reason you are not 100% satisfied with your Richen Products,please let us know and we will immediately refund your purchase price - no questions asked.
LESS MESS: Oily patches stacked as high as Mt.EverestAll needless frustration.Our cleaning kit does the job of the older traditional equipment,but with less mess and in a fraction of the time.
Built-in bore brushes, brushes and swabs bore in one quick pass.Multiple short brushes embedded in the floss pass easily through the shortest action or port.
$234
I appreciate not having to conduct a thorough cleaning after each round I fire when we are at the range. After four shots, you probably won't be firing another bullet down the barrel until it has been cleaned, as most black powder shooters are aware. I simply drag the snake on my inline gun down the barrel and out the breach a few times, and it is shing and ready to shoot again (it just won't fit). Before someone asserts that a pistol must be completely cleaned, This is fantastic to empty the barrel for additional shooting at the range, which I shall do once my day is through.
3.8/5
Coneshaped bore guide for quicker alignment
The world's quickest three-step bore shine
Designated lubrication zone on the handle; brass weight on the pull cord is stamped with size
50% more brush cleaning power than the original BoreSnake
Patented one-piece design; machine washable
$234
Wow, a Viper costs $6. I'll take 3, please! The best are these. Among other brands, I have ripcords. The best are these. When they are first pulled, they must be done slowly, but after the first or second time, they go through more easily. Additionally, I should apply some protectant to the extreme end so that it damages the barrel. Then you apply a cleaning on the first copper bristle. Sincerly, after just two pulls, my bore has a beautiful oily coating on it and shines like new! incredibly simple to clean. And it performs better than a patch or brush that is nearly never short of copper fouling or something similar... fantastic stuff In each calibe I possess, I get one or two. Mine was bought for a 6.5mm creed! You can choose between the 7mm (.277") and 25 cal (.257") sizes. Although 257 is closer, the.277 that I have works. My first pull was tight, but after that it worked perfectly. I like it a little bit bigger since the added pressure really gets in the grooves. These items, which retail for $20 in stores, are only $6 online, so you really can't go wrong! I was at least 270 one.
A 410 pistol can be a good option for home defense, as it can be easier to maneuver in tight spaces than a larger gun. It is important to remember, however, that a 410 pistol is less powerful than a rifle or shotgun, so it may not be the best choice if you live in a rural area where there are large animals.
There is no definitive answer to this question as it depends on various factors such as the type of snake, the size of the snake, and the type of bird shot. Some snake experts believe that bird shot can be effective in killing snakes, while others believe that it is not effective. Ultimately, it is up to the individual to decide whether or not they believe that bird shot is good for snakes.
Yes, snake shot is good for self-defense. It is a non-lethal way to stop an attacker and can give you time to escape.
You can get snake shot in a variety of calibers, including .22, .38, and .44. The size of the snake will dictate the size of the caliber you'll need.
A Boresnake is a tool used to clean the bore of a firearm. It is a long, flexible rod with a brush or other cleaning implement at one end, and a handle at the other. The Boresnake is inserted into the bore of the firearm and pulled through, scrubbing the sides of the bore as it goes.
The gun that is considered a snake charmer is usually a small caliber revolver. This gun is designed to kill snakes, and it is usually loaded with a single shot.
COPYRIGHT © 2019