Yes, you can store scuba gear in the garage. However, you will need to take some precautions to ensure that your gear does not get damaged. First, you should make sure that the temperature in the garage is not too hot or too cold. Second, you should store your gear in a dry place to prevent it from rusting.
Yes, you can use your iPhone 13 Pro Max underwater. However, we recommend that you use a waterproof case to protect your phone.
After returning from a diving trip, it's important to clean your scuba gear to prevent the growth of bacteria and other organisms. Rinse your gear with fresh water as soon as possible after each dive, and then give it a more thorough cleaning at the end of the day. Be sure to clean all areas, including hoses, mouthpieces, and fins. You can use a soft brush to help remove any dirt or debris.
After diving, it is important to dry your gear thoroughly to prevent the growth of mildew. The best way to dry your gear is to hang it in a well-ventilated area, out of direct sunlight. If possible, disassemble your gear and dry each piece separately. Once your gear is dry, store it in a cool, dry place.
4.8/5
Imported
External: 10.8" x 9.9" x 4.9", Internal: 9.5" x 7.4" x 4.1". Weighs 2.45 lbs (empty)
Watertight, crush resistant, IP 67, MIL SPEC 810-F
Molded padlock hole to fit standard Masterlock
Automatic Pressure Purge System
foam
Made in the USA with a Lifetime Guarantee
$234
I already have a number of rechargeable NiMHh batteries, but lately it seems like I'm adding Li-ion, LiPo, and other different varieties to my collection. Although it can be debated, lithium batteries are thought to be more hazardous than other varieties. The vast majority of lithium battery storage boxes, including those for 18650, 14500, 10440, 16430, etc., are likely small, square containers that accommodate four batteries. This is due to the fact that, in the event that one of your lithium-based batteries does catch fire, you should not keep them all together. The issue is that I now have a bunch of 4-slot battery boxes that are clogging up the space.Let's face it: I won't scatter battery boxes throughout the home to keep them organized; instead, I'll keep all of my spares in one location. I pictured a sealed military ammo can to ensure that there wouldn't be any fire. It would be fine as long as the batteries were placed in plastic containers initially, but metal boxes could short a battery if it is not protected. For reasons of safety, there are no organizers for these little boxes.Although it might not be ideal, I discovered that this plastic Seahorse 300 Protective Case was sealed, and the battery boxes fit perfectly. The square ones, the Whizzoptech 10 battery trays (which run VERY tight on lithium batteries), the DOUFIRE Battery Storage Containers with AA/AAA converter cases (I tried the converter cases, NONE of my 10440's fit), or the 8 x 18650 boxes that are widely available on Amazon (which run VERY tight on lithium batteries). You can tell from the pictures that this fits perfectly! If I hadn't ordered the 1" foam, I could have crammed more in, but I don't need to; I'm just going to glue it into the lid to fill the space and keep the boxes tightly closed.If you are hesitant to pay $21 for a plastic box, don't be. It's worth every penny. It came with a catalogue of their product, they have some pretty nice boxes. The case is fantastic, high sturdy, and I think I could run the thing over with my truck and it would be just fine.
4.7/5
Pelican cases are kept watertight through the use of a tongue and groove fit and a polymer o-ring.
Pelican cases come standard with an Automatic Pressure Equalization Valve which releases built up air pressure while keeping water out.
Pelican's Pick N'Pluck foam lets you customize the interior.
Pelican cases are kept watertight through the use of a tongue and groove fit and a polymer o-ring.
Stainless steel reinforced padlock protectors
Pelican cases come standard with an Automatic Pressure Equalization Valve which releases built up air pressure while keeping water out.
Interior Dimensions (inches): 7.25 x 4.75 x 3.06
$234
This gadget, which I bought to protect certain equipment I use at work, does its job flawlessly. This one fits well into the personal work item I bought it for. To provide my employees with business supplies, I bought ten more. With the exception of wishing I had selected the next larger size for the company ones, they are just what I needed. Before placing my order, I was unaware of how small these ones were; nonetheless, this is my fault and has nothing to do with the quality of the cases.The interior foam that can be removed is my only issue at all. To fit the equipment in some of the cases, it was incredibly simple to pluck the foam by hand. However, in a few situations, I had to cut the foam with a razor blade because trying to pluck it by hand was shredding the foam around it.
4.6/5
Rubber liner for extra protection doubles as O-Ring seal
Available in clear with color liner or solid color
Water-resistant, crush-proof and dust-proof
Automatic pressure equalization valve
Watertight (Ip67), crushproof & dustproof
Stainless steel hardware
Great for rugged sports¿not for swimming or submerging
Easy-open latch
$234
After recognizing that the dimensions of each would probably work well with one another, I purchased this for my Ruger LC9s. After some fiddling, I managed to squeeze in my LC9s, two magazines (a 7-round flush base magazine and a 9-round extended magazine), as well as my pocket pistol and magazine holsters. A third magazine would fit perfectly in the LC9s, and a fourth magazine would even fit inside the holster on top of everything else. The rubber insert in the bottom helps the case close without any issues, and everything fits snugly and doesn't move about. Actually, everything fits within pretty well. Additionally, unless it is opened, you cannot see what is inside due to the holsters on top of everything. Given that it cannot be locked, this may not be an option for everyone depending on local laws. However, this works great if you need something compact and less clumsy than a larger case, either to hold a tiny pistol or for transit. It's a Pelican, too. This model is buoyant, crush-resistant, and water-resistant. As a result, it will float on the water's surface, which is really cool. I'm overjoyed with this buy. If your pistol is smaller and you don't need holsters, you may fit more and more items inside of it. In this situation, I could definitely squeeze two LC9s stacked on top of one another without spare magazines. If you don't like the clear casing, you could also easily color the interior or outside.
4.5/5
Rubber liner for extra protection doubles as o-ring seal
Lifetime Guarantee of Excellence
Easy open latch
Great for rugged sports¿not for swimming or submerging
Automatic Pressure Equalization Valve - balances interior pressure, keeps water out
Stainless steel hardware
Water-resistant, crush-proof and dust-proof
$234
I've had Pelican boxes before and have been pleased with the quality. I'm buying this for my kayak. I need a waterproof container for my iPhone 6S (with cover), wallet, and costly remote control when I go canoeing. This size fits just right. There is no misfit. The container includes a tiny carabiner that I can attach to the deck rigging outside or the seat webbing inside the kayak. Because of the cover's clarity and sturdy clasp, I can plainly see what's within and know that it's sealed when it closes.I examined a number of the waterproof phone cases that are available, but I don't trust any of them. They are easily breakable, which can lead to a leak. Many modern cell phones have short-term water resistance. However, pricey auto remotes and smart keys are not, and they might easily cost less than half as much as a brand-new smartphone.Smaller and lighter waterproof bags are available, but when the going gets difficult, the bags sink to the bottom of the lake or river and the pelican floats to the top.
4.4/5
Multipurpose box protects against moisture, dust, dirt, and sand; great for boating, kayaking, fishing, and more
Rubber key clip and strap attachment point; O-ring closure for a watertight seal
Polycarbon
Not intended for climbing, load-bearing use, or full submersion
Backed by a manufacturer’s 1-year limited warranty
Made from shatterproof translucent polycarbonate; large size measures 3.5 x 6.8 x 8 inches with 1.5-liter capacity
$234
The description ought to include the size. Due to the lack of dimensions, I almost passed on this item when looking for a watertight box to store a first aid kit for my boat. After that, I saw a review where the author said they had used it for their first aid kit and found it to be big enough. I decided to order it nonetheless on a whim. I'm pleased I did.About 7 inches wide, 6 inches deep, and 4 inches high are the exterior measurements. Because the box taper slightly from top to bottom, I say "approximately." Due to the latches, the hinge, and the locations where a lanyard can be attached, it is actually a little bit wider and deeper. I took my measurements at approximately the midpoint of the specifications, and the interior is a little bit smaller to account for the plastic's thickness.This sturdy box is made of clear plastic of a high grade, has firm latches, a steel pin for the hinge, and a watertight sealing gasket. On one end is a rubber lanyard, while the other end has a place to attach another lanyard. The item cannot be microwaved and should not be submerged, according to warning labels on the box. Given that it has a sealing gasket, I presume the warning about using it underwater means to avoid using it while scuba diving because it doesn't appear to be able to withstand a lot of sea pressure.There was room for everything I wanted to carry for a fully filled first aid kit. I was able to organize my products so that the labels could be seen from the outside of the box on each side thanks to the clear plastic box, which decreased the likelihood that I would forget what was inside.
4.4/5
HEAVY DUTY & PROTECTIVE: Constructed of hard crush proof ABS plastic with rubber O-rings to keep out water and dust | Air Tight, Waterproof, & Dust Proof
3 ITEM BUNDLE: Includes 2 Witz Sports Cases (co branded with our Koala logo) and our soft cotton organizer travel pouch
SO MANY USES: Great for swimming, rafting, canoe, paddle board, paddlesports, kayaking, snorkeling, scuba diving, boating, river SUP, surfing, beach, or any other outdoors activity you can dream up | Even works underwater
HOLDS A LOT: Perfect for carrying your drivers license, TWIC card, photo ID, credit card, money, or other badges and IDs | Includes Neck Lanyard & Carabiner
KOALA PROMISE: We only sell great products. If you're not 100% satisfied, contact us for a full refund.
$234
I didn't want to lose some DJI Osmo Pocket parts that were roaming around. You understand what I'm talking about if you have one. I spent some time looking for a container of some sort to store the unorganized parts in. I got this one after finding it on this site. I wasn't sure if it would turn out well or not.This package contains two similar cases with koala stamps on the front. It appears that the plastic is of high quality. There is little to no give when the sides are squeezed while closed. The mouth of the case appears to have a rubber seal, but it is too deep for me to inspect it with much more than a fingernail scrape. The latching mechanism is made of plastic, but it appears to be strong. There is enough room inside for five or six I.D.-sized cards. Other than folded money and other small items like I have, you won't find much more in there. A loop with a key ring-style ring, a lanyard, and a carabiner are attached to the lid. I would feel comfortable wearing the lanyard around my neck because it appears to be of good quality. The carabiner, on the other hand, is merely a straightforward biner that costs ten cents each in the box at the counter of the dollar shop. I wouldn't depend on that part. In that case, invest in a better biner. I am unable to comment on this item's waterproof capabilities.Additionally, a little pull-string bag with nearly the same carrying capacity as one of the cases was included with these bags. When I hold it in front of my face, I can still see the computer monitor behind it because it is merely a pull-string bag made of cheap cotton.I'm happy with this case so far. It excels in the function for which I purchased it. Wonderful little thing to have in my camera bag. When I travel overseas in the coming month, I'll probably utilize both of them. Right now, 5 stars.
4.4/5
Pelican includes a wide range of consumer products imbued with the same tough-as-nails DNA as their commercial products
Pelican products are designed and built to last a lifetime
Pelican's Vision: Protecting all that you value
Pelican products are depended on by professionals in the most demanding markets
Pelican is dedicated to growing globally by providing quality products and services that add value to our customers
$234
Wow, this is a fantastic case. The item's top-notch manufacture quality is evident. It is quite rough. The latch is notable as well because it does not swivel freely and has some drag on it. The interior is very strange, although padded, and appears to be constructed of a semi-hard silicone or rubber substance. What is strange is the inner cut. On the top lining, it looks like wings. The item has a pleasant gloss to it. As seen in the product image, my goods did not include a thread. The carabiner that came with mine was not climbing-grade. Which is a little inconvenient, but the case is extremely good nonetheless. Considering the high caliber of the case, it was amazingly inexpensive. Remember the case's proportions; they are a little hefty and strangely shaped, and it won't fit, example, in your back pocket.
4.3/5
Water Resistant: Triple latch with O-ring seal; Two color choices: Forest Green and Orange
Dry storage for all outdoor enthusiasts; Sized for backpacks and gear bags
Rugged construction; Designed for extreme conditions; Ideal geocaching container
SMALL Dimensions: 9.75" x 7.75" x 2.8"; LARGE Dimensions: 9.75†x 7.75†x 4.75â€; Made in USA
Lanyard and shoulder strap-capable; Padlock tabbed; Built-in compass and signaling mirror
$234
This little dry box is rather good. Keep that in mind if you're thinking about buying this product because it's not very big. This is exactly what I was searching for in a decent portable dry box to store ammunition without it growing too heavy. Although by no means ballistic, it is quite robust (I weigh 175 pounds, and it bears my weight with ease). The three clasps should undoubtedly keep the box closed because they are all quite strong.Additionally, it can be stacked; the four tiny feet on the bottom fit into grooves on the top to add a little extra stability. This would stop it from moving side to side, but it appears that it would still move quite a bit longitudinally given that the grooves on top extend all the way to the box's edge on both sides. I have just bought one so far, so I can't really try this out.You can fasten additional fasteners, ropes, or straps to the box in a number of locations. You may attach a 550 cable or other makeshift handle to the front of the box using the two little padlock holes that are located on either side of the front clasp. Additionally, there are two somewhat larger holes on either side (approximately 50% larger) that can accommodate anything a little thicker than 550 cable. In close proximity to them (and next to the side clasps) are two 1 inch slots that can accommodate a nylon strap. The padlock holes are so little that you could only use a tiny lock, which is a little disappointing. The two larger holes on the sides would be convenient if they could also be locked with a padlock, but they do not hold the body to the lid.In this box, I can fit 300.22 rounds in addition to 600 9mm rounds. I removed the ammunition from its packaging and divided it into little plastic bags instead, putting 50 rounds of 9mm ammunition and 150 rounds of.22 ammunition in each bag. I can fit more in because I'm not constrained by the ammunition's packaging's dimensions in this way. The ammunition is now twice as protected from moisture, which is an added benefit. When I weighed the completely laden box, it was exactly 20 pounds, which is a manageable weight. Since the lid rises an additional inch or so with this load, there is still some additional space in the box. A map or some other compact folded document could fit inside, and I could probably store at least 50 extra 9mm rounds as well.Check out the photographs I've added for a better understanding of this product.
4.1/5
Crush Resistant
Uses in a large variety of scenarios
Waterproof Case
Floats Airtight
Made for the toughest and wettest environments
The Leading waterproofing products for you adventure
$234
I purchased this case for a trip to Hawaii where I would be spending time at the beach and pool. Having my hotel key card and some cash in my board shorts at the pool allowed me to avoid worrying about leaving my wallet unattended in my lounge chair. It felt approximately the size of a typical wallet in my pocket and was not overly large. Yes, it functions flawlessly and didn't leak at all after spending six days in the pool, on the water slide, and even in salt water. I can attest that it floats with three cards and a large amount of cash. Keep sand away from the rubber seal if you open it on the beach; I assume that sand on the seal could potentially cause it to leak. Excellent product, ideal for travel. My scale indicates that it weighs only 42 grams (1.5 oz) without the leash and carabiner, making it the ideal weight to keep a few items dry and safe in the event of rain. I want to use it this summer for a 4-day mountaineering trip. Just so you know, the yellow tint protects the confidentiality of the information.
3.9/5
Hand-laid lid gasket seals the inside from moisture to pretect gear from damage
Unique MOLDED-IN retainers to stack boxes on top of one another, with true square inner sidewalls that allow gear to stack tight without shifting
Dimensions Outside: 15" Length, 7.75" Width, 6.5" Height; Dimensions Inside: 12" Length, 6" Width, 4.75" Depth
Extra-thick co-polymer construction will not warp from sun, cold or rough handling
Strong reinforced steel pin hinge system and beefy carry handle that stores within lid
$234
The main reason I purchased this box as a toolkit for my 17-year-old weekend/race car is that it is weatherproof, ensuring that my tools won't rust if I put them in the box for unexpected situations. Sadly, it doesn't lock securely even though it has a fantastic seal and doesn't leak at all. The latch includes a tab that appears to fit into the adjacent dog ear, but it doesn't hold firmly. In theory, I could just put a lock on it to keep it closed in the trunk because the two together are large enough to accommodate one, but that seems like a workaround for an issue the box shouldn't have. The main reason I took away a star is because of this.The fact that this box lacks a top tray is not immediately apparent is the other factor. They larger box features the aforementioned tray, but there are no images showing it open. This one doesn't, which really upset me because I was expecting to keep stuff like an allen key or a spark plug up there and away from the bigger, heavier items. Please either make a note that it lacks a tray or snap a photo to prove it. I'm just deducting half a star because I had to order it in order to realize this.
If your BCD starts to fill with water, the best way to get the water out is to open up the power inflator and let the water drain out. You can also open up the deflation valve and let the water drain that way. If you have a lot of water in your BCD, you can take it off and turn it upside down to get the water out.
A DSMB, or diving safety marker buoy, is a key piece of safety equipment for scuba diving. When deployed, it indicates the location of the diver(s) to the surface support crew. If a diver gets into trouble, the DSMB can be used to signal for help. To dry the inside of a DSMB, start by opening up the air valve and deflating the buoy. Next, fold the DSMB in half lengthwise and shake it out to remove any water. Finally, open up the air valve and inflate the DSMB again.
Diving gear can be stored in a variety of ways, depending on the type of gear and the amount of gear you have. Most diving gear can be stored in a dry bag or container. If you have a lot of gear, you may want to consider storing it in a diving locker.
If you have long fins, you may be wondering how to store them. Here are some tips: - Hang them on a fin rack. This will keep them organized and out of the way. - Place them in a mesh bag. This will allow them to air out and prevent them from getting tangled. - Store them in a cool, dry place. This will help to prevent them from warping or breaking.
There are a few key things to remember when storing regulators: -First, make sure that the regulators are turned off. -Next, check that the o-rings and other seals are in good condition and properly lubricated. -Finally, store the regulators in a cool, dry place.
A scuba BCD can last for many years if it is properly cared for. However, the average lifespan of a scuba BCD is around 10 years.
COPYRIGHT © 2019
