A NAS system is a network attached storage device that allows you to store and share data over a network. NAS systems are usually much cheaper than buying a SAN system and can be used for a variety of applications such as file sharing, backups, and streaming media. NAS systems typically come with their own software that you install on your server or PC. This software allows you to manage your NAS and access your data from any computer on the network.
There are four types of NAS devices: home, small office/home office, enterprise, and cloud. Home NAS devices are typically used for personal file storage, media streaming, and remote access. Small office/home office NAS devices are designed for small businesses and have features such as data backup, disaster recovery, and file sharing. Enterprise NAS devices are used by large organizations and have features such as high-availability, scalability, and data security. Cloud NAS devices are used to store data in the cloud and can be accessed from anywhere.
A HDD, or hard disk drive, is a traditional storage option that stores data on a spinning disk. A NAS, or network attached storage, device connects to a network and provides file-level storage. Both devices have their pros and cons, but in general, a NAS is a better option for most users. A NAS is typically faster than a HDD and has more features, such as the ability to stream media and back up data. A NAS is also more scalable and easier to expand than a HDD. HDD devices are more likely to fail than NAS devices, and they are
Network-attached storage (NAS) is a type of dedicated file storage device that provides local-area network local access to files and applications. NAS devices are often used to store and share files among multiple computers and are often used as a backup target. A NAS can be a stand-alone device or it can be part of a storage area network (SAN). Cloud storage is a model of data storage where the digital data is stored in logical pools. The physical storage spans multiple servers (sometimes in multiple locations), and the physical environment is typically owned and managed by a hosting company
4.6/5
Four Gigabit LAN ports (RJ-45) with failover and Link Aggregation support; optional 10GbE add-on card provides high-speed data transfer rate
Scalable up to 18 drives with 2 expansion unit DX517 TO meet high capacity demands
Superior sequential throughput at over 2, 045 MB/s reading and 656 MB/s writing
4 GB DDR4 memory pre-installed, expandable up to 32 GB
Boost IOPS performance with M.2 NV Me/SATA SSD cache through optional M2D18 adapter card
$234
Updates=======This must now go from one star to four stars. Since writing my first review, I completely rebuilt the array (recommended by Synology support). This meant that instead of the applications being upgraded automatically and keeping their settings, I had to manually set them all up again. I chose two more expensive drives that are on their list of compatible hardware instead of keeping both Nvme drives. Even though I used the old Nvme drives for a while after rebuilding and saw no faults, they indicated it "might" have been a problem. I didn't want to risk it.As of 9/30/2019, everything had been rebuilt, and it has been quite stable. Since then, I've rebooted numerous times and experienced only a few power outages.I don't really have any issues about it at this moment. The surveillance station is really effective. For further redundancy, I have a few folders syncing to my old DS213 at a friend's house. Plex is also very functional.original analysis=============I was excited about the capacity options I would now have and purchased this to replace my outdated DS213 2 drive system. I transferred the two 4TB disks from my DS213 over, as well as three 10TB drives, and two 512GB Nvme SSD drives.The transition to the new system went well and was simple. I just moved one drive from the previous system, which was configured in a RAID 1 mirror, to the new system, and it immediately detected the disk and upgraded all the programs for me. After that, I inserted the 10TB disks, and when everything seemed secure, I took off the final drive from the previous NAS and moved it over. All went well up until a few days later.When I look up from my desk, the NAS's blue light is flashing but there is no activity on the hard drives. Since I cannot access it, I performed a hard boot by pressing and holding the power button for 10 seconds. When it restarted, it revealed that there were faults on the drive and that a consistency check was necessary. After I let it reboot, it showed that it had identified an error and needed to do another check. No matter how many times I try to solve the problem, nothing works.Surveillance Station also stopped operating on top of all of this. It repeatedly starts and stops. I made unsuccessful attempts to uninstall and reinstall it. Given that nine of my cameras are no longer recording, this is a serious issue.Additionally, the Nvme SSD cache indicates that "volume/LUN is missing." I can only remove it and then build it again as a solution. But if I do, I must consent to the warning that everything on the system could be lost. I do not want to be without anything! The drive manager indicates that all drives are functioning perfectly despite these recurring issues.I made a ticket in their ticketing system to contact customer service a week ago. I receive a response requesting for access to my system and instructions on how to grant it to them two business days later. I do this, and the following day I hear back telling me to try a different approach because it didn't work. I've been back and forth with them for a week, and they've only ever responded by telling me to do something else every other day. My security system is still not working, and my system is still useless. This must change!It's unfortunate because I paid a lot of money on the camera licensing and hardware because if this keeps up, I'll throw out this piece of rubbish and use another vendor. But above everything else, I need dependability and client support! This kind of problem shouldn't occur virtually soon away. And if I'm one of the fortunate few to experience it, they ought to be able to offer prompt assistance. They only receive 1 star since they fall short on both counts.
4.6/5
PCIe 3.0 slot for optional 10GbE add-on card; Four built-in 1GbE (RJ-45) ports with failover and Link Aggregation support
Powerful and scalable 6-bay NAS optimized for data-intensive work environment. File or folder level data restoration makes data recovery fast and flexible
Boost IOPS system performance with M.2 SSD cache by using optional M2D17 adapter card
Quad-core, 2.1 GHz CPU with AES-NI support and 4GB DDR4 memory, expandable up to 32GB; Outstanding performance at over 1,550 MB/s reading and 580 MB/s writing
Advanced Btrfs file system offering 65,000 system-wide snapshots and 1,024 snapshots per shared folder.Maximum Single Volume Size:108 TB
$234
Updates=======This must now go from one star to four stars. Since writing my first review, I completely rebuilt the array (recommended by Synology support). This meant that instead of the applications being upgraded automatically and keeping their settings, I had to manually set them all up again. I chose two more expensive drives that are on their list of compatible hardware instead of keeping both Nvme drives. Even though I used the old Nvme drives for a while after rebuilding and saw no faults, they indicated it "might" have been a problem. I didn't want to risk it.As of 9/30/2019, everything had been rebuilt, and it has been quite stable. Since then, I've rebooted numerous times and experienced only a few power outages.I don't really have any issues about it at this moment. The surveillance station is really effective. For further redundancy, I have a few folders syncing to my old DS213 at a friend's house. Plex is also very functional.original analysis=============I was excited about the capacity options I would now have and purchased this to replace my outdated DS213 2 drive system. I transferred the two 4TB disks from my DS213 over, as well as three 10TB drives, and two 512GB Nvme SSD drives.The transition to the new system went well and was simple. I just moved one drive from the previous system, which was configured in a RAID 1 mirror, to the new system, and it immediately detected the disk and upgraded all the programs for me. After that, I inserted the 10TB disks, and when everything seemed secure, I took off the final drive from the previous NAS and moved it over. All went well up until a few days later.When I look up from my desk, the NAS's blue light is flashing but there is no activity on the hard drives. Since I cannot access it, I performed a hard boot by pressing and holding the power button for 10 seconds. When it restarted, it revealed that there were faults on the drive and that a consistency check was necessary. After I let it reboot, it showed that it had identified an error and needed to do another check. No matter how many times I try to solve the problem, nothing works.Surveillance Station also stopped operating on top of all of this. It repeatedly starts and stops. I made unsuccessful attempts to uninstall and reinstall it. Given that nine of my cameras are no longer recording, this is a serious issue.Additionally, the Nvme SSD cache indicates that "volume/LUN is missing." I can only remove it and then build it again as a solution. But if I do, I must consent to the warning that everything on the system could be lost. I do not want to be without anything! The drive manager indicates that all drives are functioning perfectly despite these recurring issues.I made a ticket in their ticketing system to contact customer service a week ago. I receive a response requesting for access to my system and instructions on how to grant it to them two business days later. I do this, and the following day I hear back telling me to try a different approach because it didn't work. I've been back and forth with them for a week, and they've only ever responded by telling me to do something else every other day. My security system is still not working, and my system is still useless. This must change!It's unfortunate because I paid a lot of money on the camera licensing and hardware because if this keeps up, I'll throw out this piece of rubbish and use another vendor. But above everything else, I need dependability and client support! This kind of problem shouldn't occur virtually soon away. And if I'm one of the fortunate few to experience it, they ought to be able to offer prompt assistance. They only receive 1 star since they fall short on both counts.
4.5/5
Live transcoding of up to two concurrent H. 265/H. 264 4K video streaming
Encrypted sequential throughput performance at over 113 MB/s reading and 112 MB/s writing
By default, two camera licenses are installed; extra licenses can be purchased (CLP1, CLP4, or CLP8)
2GB DDR3L memory (expandable up to 6GB)
Advanced Bars file system offering 65, 000 system-wide snapshots and 1, 024 snapshots per shared folder
Dual-core Processor with AES-NI encryption engine
$234
I've included a few pictures; nothing too shocking; it's a 4 bay NAS (that can be expanded to 9 drives). Plastic frame and hard drive housings give it a somewhat lightweight impression, but when it is loaded with drives, the weight savings are noticed.Along with the SSDs, I added an M2 NVMe disk to set up the cache. Later, during setup, you discover that a single cache SSD maximizes read speed; instead, you need two SSDs for caching to provide the optimal performance for both read and write workloads. Here, I'll have to conduct some testing and investigation. I'm sure someone else has already come up with a solution!I took two minutes to open the box, five minutes to mount the drives in the slots, and three minutes to boot (not fully set up but access to the web utility pretty quickly for first boot).You'll be requested to download DiskStation Manager and make an account. Therefore, after placing your order, go ahead and download the DS Manager and your PDFs from Synology so that everything is prepared. The DS Manager setup called for a 10-minute countdown, but it only took five minutes on my device.The admin website's navigation is quite beautiful and similar to that of a desktop operating system. The "shell" includes a Control Panel and a File Navigator to get you started, and you may install apps from there. To configure your drives, however, you must first visit Storage Manager.I purchased this primarily for media storage, therefore I chose Raid 5 to make the most of my new disks. The Parity Consistency check was done over a period of around 12 hours. However, I checked after around two hours and saw that I still had useable space, so I moved a few files across to begin going. It's possible that this was true from the beginning.Overall, setup was simple; I wouldn't call myself an expert, but I'm also not a rookie. The Synology boards are a highly busy place for research, and there were instructions and options along the route to assist people who were new to setting up a NAS.If I have any substantial performance or experience updates, I'll provide an update here; otherwise, I'm satisfied with the unit so far.
4.4/5
HEAVY-DUTY & DURABLE DESIGN: Constructed with SPCC commercial cold-rolled steel, the sturdy cabinet shelf ensures long term durability and supports a total weight load of 50 lb. (22 kg) making it the perfect rack shelf solution for any environment.
INDUSTRY-LEADING SUPPORT: StarTech.com offers a lifetime warranty and free lifetime technical support on this TAA compliant 2U vented server rack mount shelf, and has been the choice of IT professionals and businesses for over 30 years.
MAXIMIZE VENTILIATION: The vented shelf plate on the cantilever rack shelf ensures consistent airflow to effectively dissipate heat on servers. It also works great to keep your computer and AV equipment cool in your home, studio or office space.
UNIVERSAL 19'' FIT: This 2U vented server rack mount shelf is designed to fit virtually any 19in server rack and can accommodate an internal depth of 16in (406mm) for your data, IT, networking or other non rack mount equipment.
VERSATILE FUNCTIONALITY: At 16in deep, this fixed rack mount shelf is designed to work with any 19in cabinet or equipment rack. It provides additional storage space for mission critical hardware, and can even store your tools or audio / video accessories.
$234
With the exception of being more durable and made of thicker steel than I had anticipated at under $30, this is one of those instances where what you get is exactly what you'd expect based on what you see online. The screws that are included with it go in easier than any other ones I've used and come with the small things (sorry) you place in the square holes so you can use them to anchor it. It feels very solid after the four screws are installed.If I had the chance, I would change the following:1) The front lip blocks the upper portion of the space below it, which I understand reinforces the unit and prevents flex. Although the "filler bar" won't fit back in, it didn't matter because I didn't have a server underneath the two unit space I was putting this in. If I had a server in the area below it, I have a suspicion that I wouldn't be able to remove the server without taking this out. I'm not certain about it.2) A raised lip on the back would have been nice. Nothing pointy that might pierce wires, but rather something blunt that would keep things from rolling off; perhaps this would make the lower lip at the front unnecessary.Aside from those issues, this is a great piece that was well crafted for the price, and I'm not sorry I own it.
4.4/5
Compatibility: HDD/SSD, IP Camera, Surveillance Devices, Router, Network Card, Other Devices
Advanced file system offering 65,000 system-wide snapshots and 1,024 snapshots per shared folder
Dual-channel H.265/H.264 4K video transcoding on the fly. Operating temperature: 5°C to 40°C (40°F to 104°F).Maximum Internal Raw Capacity: 56 TB (14 TB drive x 4) (Capacity may vary by RAID types)
Encrypted sequential throughput at over 225 MB/s reading and 221 MB/s writing
4GB DDR3L-1866 memory, expandable up to 8GB; Scalable up to 9 drives with Synology DX517
Quad-core processor with AES-NI hardware encryption engine; Dual 1GbE LAN with failover and Link Aggregation support
$234
I've included a few pictures; nothing too shocking; it's a 4 bay NAS (that can be expanded to 9 drives). Plastic frame and hard drive housings give it a somewhat lightweight impression, but when it is loaded with drives, the weight savings are noticed.Along with the SSDs, I added an M2 NVMe disk to set up the cache. Later, during setup, you discover that a single cache SSD maximizes read speed; instead, you need two SSDs for caching to provide the optimal performance for both read and write workloads. Here, I'll have to conduct some testing and investigation. I'm sure someone else has already come up with a solution!I took two minutes to open the box, five minutes to mount the drives in the slots, and three minutes to boot (not fully set up but access to the web utility pretty quickly for first boot).You'll be requested to download DiskStation Manager and make an account. Therefore, after placing your order, go ahead and download the DS Manager and your PDFs from Synology so that everything is prepared. The DS Manager setup called for a 10-minute countdown, but it only took five minutes on my device.The admin website's navigation is quite beautiful and similar to that of a desktop operating system. The "shell" includes a Control Panel and a File Navigator to get you started, and you may install apps from there. To configure your drives, however, you must first visit Storage Manager.I purchased this primarily for media storage, therefore I chose Raid 5 to make the most of my new disks. The Parity Consistency check was done over a period of around 12 hours. However, I checked after around two hours and saw that I still had useable space, so I moved a few files across to begin going. It's possible that this was true from the beginning.Overall, setup was simple; I wouldn't call myself an expert, but I'm also not a rookie. The Synology boards are a highly busy place for research, and there were instructions and options along the route to assist people who were new to setting up a NAS.If I have any substantial performance or experience updates, I'll provide an update here; otherwise, I'm satisfied with the unit so far.
4.4/5
Advanced file system offering 65,000 system-wide snapshots and 1,024 snapshots per shared folder.Two channels H.265/H.264 support 4K video transcoding on the fly
CPU Frequency:Quad Core 1.5 burst up to 2.3 GHz. Maximum Concurrent CIFS/AFP/FTP Connections-500. Maximum Connections- 20.Maximum Single Volume Size: 108 TB
Encrypted sequential throughput performance at over 226 MB/s reading and 184 MB/s writing
Quad-core processor with AES-NI hardware encryption engine; Dual 1GbE LAN with failover and Link Aggregation support
2 GB DDR3L-1866 memory (scalable up to 6 GB); Scalable up to 7 drives with Synology DX517
$234
I've included a few pictures; nothing too shocking; it's a 4 bay NAS (that can be expanded to 9 drives). Plastic frame and hard drive housings give it a somewhat lightweight impression, but when it is loaded with drives, the weight savings are noticed.Along with the SSDs, I added an M2 NVMe disk to set up the cache. Later, during setup, you discover that a single cache SSD maximizes read speed; instead, you need two SSDs for caching to provide the optimal performance for both read and write workloads. Here, I'll have to conduct some testing and investigation. I'm sure someone else has already come up with a solution!I took two minutes to open the box, five minutes to mount the drives in the slots, and three minutes to boot (not fully set up but access to the web utility pretty quickly for first boot).You'll be requested to download DiskStation Manager and make an account. Therefore, after placing your order, go ahead and download the DS Manager and your PDFs from Synology so that everything is prepared. The DS Manager setup called for a 10-minute countdown, but it only took five minutes on my device.The admin website's navigation is quite beautiful and similar to that of a desktop operating system. The "shell" includes a Control Panel and a File Navigator to get you started, and you may install apps from there. To configure your drives, however, you must first visit Storage Manager.I purchased this primarily for media storage, therefore I chose Raid 5 to make the most of my new disks. The Parity Consistency check was done over a period of around 12 hours. However, I checked after around two hours and saw that I still had useable space, so I moved a few files across to begin going. It's possible that this was true from the beginning.Overall, setup was simple; I wouldn't call myself an expert, but I'm also not a rookie. The Synology boards are a highly busy place for research, and there were instructions and options along the route to assist people who were new to setting up a NAS.If I have any substantial performance or experience updates, I'll provide an update here; otherwise, I'm satisfied with the unit so far.
4.3/5
Everywhere access with iOS/Android/Windows ready mobile apps
An integrated media server supporting multimedia streaming.Maximum Single Volume Size:16 TB
Compatible drive - 3.5" SATA HDD; 2.5" SATA HDD (with optional 2.5" Disk Holder) ; 2.5" SATA SSD (with optional 2.5" Disk Holder)
Dual-core CPU with hardware encryption engine. Operating Temperature: 5°C to 40°C (40°F to 104°F)
A versatile entry-level 2-bay NAS for home and personal cloud storage
Over 113 MB/s reading, 112 MB/s writing
$234
Your text will be rewritten by QuillBot. Start by typing or pasting something into this box, then hit the enter key.
4.3/5
Loaded with two 4GB DDR3L memory module, providing 8GB memory capacity in total.Power Supply Unit / Adapter - 120 W. AC Input Power Voltage - 100 V to 240 V AC .Power Frequency - 50/60 Hz, Single Phase
Built-in two M.2 NVMe SSD slots for system cache support; Dual 1GbE (RJ-45) ports with failover and Link Aggregation support
Quad-core CPU with AES-NI encryption engine, delivering reading and writing throughput at over 225 MB/s even when data are encrypted
Dual-channel H.264/H.265 4K video transcoding on the fly
Scalable up to 10 drives with one expansion unit DX517 connected
$234
The stuff is excellent. Good bargain, but if you can't get the answers you need on YouTube and other online resources, you're in for a lot of pain. Technical support is hardly ever offered. Even after you create a ticket, no one responds, and the degree of knowledge of the people answering the phone and in live chats is limited to making excuses for the company's inadequate technical assistance.
4.1/5
Sequential throughput performance at over 226 MB/s reading and 170 MB/s writing
4K 10-bit H.265 video transcoding on the fly
Dual 1GbE ports with failover and Link Aggregation support
Over 40TB raw single volume capacity. Operating Temperature - 5°C to 40°C (40°F to 104°F)
Storage Temperature -20 degree Celsius to 60 degree Celsius (-5 degree Fahrenheit to 140 degree Fahrenheit)
$234
I had tried a few different storage options for my home and the small business run by my family, but none of them seemed to perform as well as they were supposed to or fit my needs. In all honesty, it was my decision to look for a less expensive option because $400 for a NAS and another $400 to $500, at the very least, for the drives to put in it, is a lot of money. Though I can't even begin to express how delighted I am that I succeeded. This is a quality item. Although I haven't had a chance to evaluate a media server's functions yet, I can speak to their uses as a storage option. This NAS makes file sharing, data storage, and backups very simple—and not only because I studied computer science. The web interface is straightforward to use and quite intuitive, even for those who aren't the best at using computers. On a local network, setup is really simple. Although still considerably simpler than something like an Ubuntu server, setting up for remote access for numerous users will probably still require a little more than average technical and networking skills. Particularly if using a firewall or antivirus program, as you will need to make an exception for the remote IP address. You will also want a static IP address or a domain name together with a DDNS service for setting up a remote network disk.Overall, though, I couldn't be happier with the product so far and am glad I chose to spend a little more money on something that works excellent, is simple to use, and satisfies all my demands. Once I have the chance to text some of the media server capabilities, I'll try to return and update.UPDATE: Using this as a media server, I've now had the chance to try a few of the capabilities. I've loaded some movies onto it, and I can stream them. I've got some good news and some bad news, I think. Let's start with the disappointing news.Unfavorable news: Plex fans may be out of luck. Except for those NAS systems powered by an Intel processor, Synology appears to have stopped providing support for Plex. Some of the earlier DS418 machines indeed use Intel chips, but practically all of the newer devices have Realtek quad-core processors, according to the Plex forums. But don't worry; I did discover a different approach, and I'll let you know the good news. Another issue I discovered is that if you are trying to stream HD video and there are some other services active, you could occasionally see some stuttering due to background uploading or downloading. I'm not sure if this is because of the processor or the restricted RAM, but I intend to add additional RAM soon. I also recently enabled ethernet port aggregation, so I'll try to see if that makes a difference. **Note: If your router supports true port aggregation, it will only function. Load balancing bonding is present, however it differs from port aggregation in certain important ways. After making these changes, I'll retest and provide another update.Good News: While there is some stuttering, you can easily get around it by halting some of the backup services you may be using while trying to stream video. While this isn't ideal, it's not a significant concern in my opinion considering the price point compared to other options. This problem might even be solved by the port aggregation I recently enabled and my intention to increase the RAM. The other good news is that there is an application called Archos for the Amazon FireStick that, in my opinion, appears to function pretty well for those of you who aren't set on Plex. You can look through all of your server-based folders, see images, listen to music, and watch videos. I haven't tried using this application for remote streaming yet; I've only tried it while streaming on my local network thus far. I'll return and provide another update as soon as I have the chance.
3.8/5
A versatile and easy-to-use 1-bay NAS for personal cloud storage
Sequential throughput at over 112 MB/s reading and 108 MB/s writing
Anytime and anywhere access with iOS and Android mobile apps
Dual-core CPU with hardware encryption engine
Running on Synology DiskStation Manager (DSM)
$234
This is unquestionably not a quick device. I originally got this, and it was moving quite slowly. VERY slowly The DSM and all these other default services, which I never use, were installed. The Drive service, video service, music service, and other Synology services. And it took several hours for it to be fully functional. When I would instruct it to install Cloud Sync, it would take some time before doing so. Even my older 118j didn't seem this slow, however a large portion of that may have been because I didn't have a NAS drive.Other than that, it functions exactly like my 118J, except that they now appear to be using Plex. I use Cloud Sync, which is great, to sync and maintain an offline copy of my Dropbox on my local PCs.However, you cannot ignore the fact that the machine moves slowly. It seems to be working better now that I've deleted all of the Synology services I don't use (Music, Moments, Drive sync, and Video).So, if you're looking for a lightning-fast NAS, look elsewhere. But, like the 118j, it's quite simple to install and set up. To set it up via a web interface, go to find.synology.com. In addition, if you are unfamiliar with the unit, be sure to run the security advisors. They tried to hack into my 118j once; they're the "good guys," they claim in their emails, and if you enable that option, they'll inform you that they've seen it posted online, but they were unsuccessful. As a result, it made adjustments that I was able to allow after checking the security advisors. Eventually, I removed that as I just use Dropbox for synchronization and those files are already available online.Overall, it's an excellent unit, though a little difficult to set up and slow to operate. However, if you only want to use it to store files and use Cloud Sync to sync them to OneDrive, Dropbox, etc., it should work just fine. I paid $72 for the unit as a Warehouse item, so I received about what I paid for.It seems to be moving much better now after 1.5 days. Still a touch slow, but adequate. Another useful function is to enable Google Print and connect a USB printer to it. My ancient Samsung laser printer is no longer compatible with the network or wifi, however USB always works. In a manner, this still enables me to have a remote printer so that I can use the Google Print service to print from anywhere. a lovely feature.
Network-attached storage devices have become increasingly popular in recent years as a way to store and share data. But is this type of storage secure? There are a few things to consider when it comes to the security of network-attached storage. First, the device itself may be vulnerable to physical attacks. If someone were to gain access to the device, they could potentially access the data stored on it. Second, the data stored on a network-attached storage device is usually accessible over the network. This means that if the network is not properly secured, someone
Network storage is a term used to describe the process of storing data on a network. There are many different types of network storage, but some of the most common include file servers, print servers, and database servers.
There are three basic types of network: 1. Local area network (LAN): A network that connects computers and other devices within a small area, such as a home, office, or school. 2. Metropolitan area network (MAN): A network that connects computers and other devices within a city or metropolitan area. 3. Wide area network (WAN): A network that connects computers and other devices across a large area, such as a country or the world.
There are three types of network attached storage: direct attached storage, storage area networks, and network attached storage. Direct attached storage is a type of network attached storage that connects directly to a computer or server. Storage area networks are a type of network attached storage that connect storage devices to a network. Network attached storage is a type of network attached storage that connects to a network.
There are four types of storage: local storage, cloud storage, optical storage, and tape storage. Local storage is a type of storage that is located on a physical device, such as a hard drive. Cloud storage is a type of storage that is located on a remote server and can be accessed from anywhere. Optical storage is a type of storage that uses a laser to read and write data. Tape storage is a type of storage that uses a tape to store data.
Network attached storage (NAS) is a file-level computer data storage server connected to a computer network providing data access to a heterogeneous group of clients. NAS is specialized for serving files either by its hardware, software, or configuration. It is often manufactured as a computer appliance – a specialized computer built from the ground up for storing and serving files – or as a computer module that can be added to an existing network infrastructure. The main advantage of NAS is that it is very easy to set up and use. NAS devices typically come with their own operating system and web interface that can
COPYRIGHT © 2019