Best Camcorder Cases in 2022

Last update: December 27, 2022

Smatree Carrying Case Compatible with DJI Osmo Pocket-Fit for Osmo Pocket Charging Case Review:


The cutouts for the micro SD cards are not very tight and are over 1.5" deep; when, not if, the cards go all the way in they will be extremely difficult to remove without the aid of tweezers or something similar.



Smatree Carrying Case Compatible with DJI Osmo Pocket Review:


I believe Smatree presents solid arguments overall. I thought I would purchase this one for my Osmo Pocket because I already had one for my Mavic 2. My initial thought was, great! On the outside, it resembles my Mavic case in terms of appearance and durability, but I'm less enthusiastic with the interior. It perfectly protects my Osmo in its own protective case, but the slots for my filters are not really good. They fit okay, but if they press down too much, you'll have to push it all the way through the foam and remove the foam to grab them at the bottom. I use Freewell ND-Polarize filters, and after they are slotted, they are difficult to grasp. The top zippered compartment is adequate, but difficult to insert and remove objects from. I will remark that this case fits my Mavic 2 case and is preferable to having none at all.



Smatree Carrying Case Compatible for GoPro Hero 8/7/6/5/4/3+/3/2/1/GOPRO HERO (2018)/DJI Osmo Action(Black & Red)-Extra-Small Review:


The case appears to be well-built. A well-cut foam separator and a rigid outer shell wrapped in nylon fabric. Overall a wonderful case, although (at first) I didn't get the exact one pictured!The case I received has an open pocket there, in contrast to the Amazon image showing a zippered inner compartment integrated into the top. I chose the Smatree over the comparable but more expensive POV Case XS GoPro-Edition 3.0 Black because of the zippered compartment functionality. The little objects must remain where they are!UPDATE: The seller inquired via email as to my satisfaction with the product. I responded and gave an explanation of the mismatch between the picture and the case I had. Free of charge, they supplied the right one (with a zippered pocket)! The other case didn't even need to be returned. I now possess two. :-)The two larger openings in the foam divider appear to be for extra accessories like the LCD back, Battery BakPak, or WiFi remote, so keep that in mind. You will be in top condition if you have these accessories. I would have chosen a location for the camera's strangely formed 3-Way Pivot Arm. It doesn't fit properly in the foam or the unzipped pocket. To fit the arm into the case, I had to disassemble it. Since I don't currently have the attachments those slots appear to be intended for, I might attempt cutting the foam to create a wider space.UPDATE: After using the new case, I've determined that disassembling the 3-Way Pivot Arm to make it fit inside the zipper compartment isn't really a big deal. With the merchandise and the service, I'm quite satisfied.



SUREWO Surface-Waterproof Carrying Case Compatible with GoPro Hero 8/7/(2018)/6/5 Black,Session 5/4,Hero 3+,DJI Osmo Action,AKASO/Campark/YI Action Camera and More(Mini) Review:


This is what I bought for my GoPro 7. Very well done! It can be used with your GoPro while still being attached to your selfie stick and has an extremely compact form factor. I just toss it in my backpack or pack and it's always safe and ready to go when I use it with my GoPro Shorty. There isn't anything I don't like about it, however the zippers should be improved.This item would be ideal if the zippers were stronger or more durable. Having said that, I've had no issues with the zippers and am pleased as punch with my purchase. I have looked everywhere for a case for my GoPro camera, and this is the finest one I have found.



Smatree Hard Shell Backpack Compatible for DJI Phantom 4/4 Pro (Original Styrofoam Case, Phantom 4 Battery, Propellers Not Included) Review:


The moment I opened the box and began to unfold the bag, I knew it was a high-quality item. The nylon fabric is sturdy and expertly stitched together! There is cushioning carefully positioned to cushion the drone against your back. There are also lots of pockets for extra batteries and gear, and mesh pockets can keep water bottles or other accessories for easy access.My Phantom 4 Pro OEM carry case fit simply and flawlessly in the backpack after folding down and velcroing the top compartment floor! Even the carry box has a little opening covered by a flap so you can simply open it after unzipping the cover panel without taking the case out of the pack! The padded insert may now be placed in the top compartment with ease once the case is inside the pack. If you choose to unfold and Velcro the separators, this may accommodate four extra batteries. Alternatively, you can use it as a sizable compartment to store a CrystalSky or other fragile goods.The charger, filters, and wires can be stored in a sizable luggage pocket that is located on the outside of the case cover. On both sides of the bag, there is a smaller slide pocket that can fit documents and identification, but nothing too large.The adjustable, excellent shoulder straps include some cushioning. For longer excursions, the adjustable waist strap can assist relieve some of the weight from your shoulders. The zippers contain handy pull strings that make opening them while wearing gloves easier.Anyone who owns a drone from the Phantom 4 series should get this pack, in my opinion. This pack is designed to use and transport the original foam case that the Phantom 4s ship in; without it, it will not function. The value in this pack is unbeatable!



AmazonBasics Small Carrying Case for GoPro And Accessories - 9 x 7 x 2.5 Inches, Black Review:


I modified the pre-cut apertures slightly with a Fastcap Kaizen Knife because they didn't fit my accessories very well. Most likely, you could accomplish this with a regular razor blade as well.Changes I made (see photo affixed):* I made one large aperture to hold my GoPro twin bay charger by enlarging the two lower/middle openings. I don't need the pre-cut battery slots on the upper right side of the charger because I had spare batteries in it; I used those for something else.* Added case/Memory Card holders to the upper right side of the battery slots.* Added a few teeny spaces to keep the key/ring for the remote above the dual-bay charger.What I have in my circumstance is:Hero 7 Black Plus FrameSuction-cup mountingThe handlebar/pole mountDouble-bay chargerintelligent remoteHelmet mounting* Flash memory* a number of USB charging cables* There is still space for more little items (e.g. adhesive mounts, tethers, etc)Other notes:I was pleasantly impressed by the foam's high quality. It features a thin top layer that is significantly more stiff than the bottom layer; this layer gives the structure and aids in maintaining the shape of the holes.To get the case to seal flat, I did need to partially detach the suction cup. However, it fits.I'm ecstatic that this only cost $16.



AmazonBasics Large Carrying Case for GoPro And Accessories - 13 x 9 x 2.5 Inches, Black Review:


I modified the pre-cut apertures slightly with a Fastcap Kaizen Knife because they didn't fit my accessories very well. Most likely, you could accomplish this with a regular razor blade as well.Changes I made (see photo affixed):* I made one large aperture to hold my GoPro twin bay charger by enlarging the two lower/middle openings. I don't need the pre-cut battery slots on the upper right side of the charger because I had spare batteries in it; I used those for something else.* Added case/Memory Card holders to the upper right side of the battery slots.* Added a few teeny spaces to keep the key/ring for the remote above the dual-bay charger.What I have in my circumstance is:Hero 7 Black Plus FrameSuction-cup mountingThe handlebar/pole mountDouble-bay chargerintelligent remoteHelmet mounting* Flash memory* a number of USB charging cables* There is still space for more little items (e.g. adhesive mounts, tethers, etc)Other notes:I was pleasantly impressed by the foam's high quality. It features a thin top layer that is significantly more stiff than the bottom layer; this layer gives the structure and aids in maintaining the shape of the holes.To get the case to seal flat, I did need to partially detach the suction cup. However, it fits.I'm ecstatic that this only cost $16.



Large Carrying Case for GoPro Hero(2018),Hero 8 Hero 7 Black,HERO6,5,4,+LCD, Black, Silver, 3+, 3, 2 and Accessories by HSU with Fully Customizable Interior Carry Handle and Carabiner Loop Review:


My action cameras are in a very durable housing! I can fit two cameras and a couple mounts inside of this case, making it convenient for travel. It has a specific location with mounts for a few SD cards. I keep my little tripod, some ties, a lens cleaning cloth, and a charging cord in the pouch. I have space for more mounts or some of my larger mounts if I don't put two cameras in. The pouch with a zipper is a major benefit. My gear spills out of my previous cases every time I open them since they don't have pouches that close. In this instance, the foam is also an improvement. It is dense enough to maintain its shape while still offering effective protection. To prevent my waterproof cases and lenses from being scratched, the bottom of the case is lined with soft textiles. The sturdy outer shell shouldn't be crushed in my backpack because it is. Another high-quality zipper is the one used to close the case. I have faith that it won't unintentionally rip open. This bag fits in my backpack perfectly and has all the accessories I need for an entire day of action camera fun! If you travel with an action camera or cameras, I highly suggest this!



Smatree Hard Carrying Case Compatible for DJI Mavic 2 Pro/Mavic 2 Zoom Fly MoreCombo(Upgrade Edition) Review:


It won't fit all the charging equipment, but it will fit everything I want to bring with me to get my drone flying (home and car chargers, cables, wires, hub, etc.). However, I can't think of many situations in which I'd need all that gear just to fly my Mavic. (I keep those items in the soft carry bag that comes with the Fly More bundle, along with a few extras I don't always require.)The case contains excellent foam that provides protection. It appears like all the "egg crate" style foam is on every kind of carrying case I've bought. The foam on top is the softer regular type foam. The lower foam (parts with the properly shaped cut-outs) is thick and fairly hard, but definitely not "too hard." Which is advantageous for allowing a small amount of "play" if something (like a spare prop or a case for my filters) needs it to close without applying undue pressure to any of its contents.Overall, it's the perfect size (compact and practical) for carrying what I need rather than items I won't likely use during my little stint of "flying."



TEKCAM Action Camera Carrying Case Protective Bag Compatible with Gopro Hero 7 6 5/AKASO ek7000 Brave 4 6/APEMAN/Campark/Crosstour 4k/VanTop/Dragon Touch Waterproof Camera Travel Storage (Medium) Review:


This was the ideal housing for my TG-4 camera that I was looking for.I was able to fit and protect everything I put in the case with just a little minor trimming of the pre-cut foam.This cover is great for the price; in fact, I bought another soon after receiving the first one for a second little camera.The follow-up service provided by TEKCAM was excellent.