5/5
SATISFACTORY GUARANTEE: HELEMAN glass door locks are made of zinc alloy, chrome finish and carefully manufactured, available for longer service life than other display case locks in market. If anything ever goes wrong with HELEMAN sliding glass door locks, like the display case locks arrive broken, or you have no idea how to install, contact us via email or TOLL FREE CALLS, we will reply within hours.
KEYED ALIKE, WIDELY USE: HELEMAN glass door locks are keyed alike, which made it possible to lock and open multiple retail display cases with one key, safe and convenient for you. Perfect display case lock for single glass door display cases, trophy cases, retail cases, snakes cage, award medals cabinets, old gun cabinets with 2 sliding glass doors, and small sliding glass door jewelry case.
UPGRADED QUALITY: Made of zinc alloy, chrome finish and carefully manufactured, HELEMAN sliding glass door ratchet locks are solid, sturdy, rust-proof, and durable. Premium screws, heavy-duty locks, ultra thick bars increase security. An amazing display case lock, keep the preschooler out of the medicine cabinet!
EASY TO INSTALL: HELEMAN glass door lock is really easy to install, can be easily slipped onto the edge of the glass door, requiring no boring of holes. Sliding glass door lock comes with set screws and a cushioned lining, holding them securely to the glass, won't scratch up your glass window. Perfect display case lock for retail business and home applications.
GENERAL SIZE: Sliding glass door lock fits glass up to 0.47 inches (most typical retail display cases and glass doors), which meets the most demands. There are two anti-slide rubber for each display case lock, chip away a little of it to fit fine if the sliding door is too thick. Any retail establishment with display cases will find this glass door lock a great addition to business.
$234
For reasons of safety, I've been looking for glass lockers. I discovered one in a shopping center that was comparable and reasonable in price, however it stuck and I was unable to smoothly open the glass door using the locker. Of course, I gave it back. But since it at least allowed me to open the glass door smoothly, this one appears a little better. I'm content.
4.8/5
ã€Easy to Install & Cost-effective Set】Cranach drawer and cabinet locks come with necessary install parts in each pack. Use power screwdriver and drill to mount CRANACH key locks with a latch on your cabinet panels, finish DIY. CRANACH locks for cabinet installation needs less than 15 minutes. It also works well as replacement locks for the filing cabinet, drawers, toolboxes, RV camper, mailboxes, etc.
ã€Sturdy & Durable Cranach Cam Lock】More than 60,000 times operation test,adopted precision polishing electroplating and solid forging process for zinc alloy materials, enhances antioxidant, waterproof, rustproof functions to keep corrosion resistance and wear resistance. The thickened lock latch enhances the durability, is perfect for keeping your small items safe. The anti-slip design for the thread, hex nut, and screw effectively prevents the file cabinet lock from loosening when using.
ã€5 Year Satisfied Warranty】Product Quality And Customer FULLY Satisfaction Is The Priority! If you are not entirely thrilled with your purchase, like the cabinet lock arrives broken, or you have no idea how to install CRANACH cabinet locks with keys please feel free to contact us and we will respond in 24 hours. Note: Each cam lock is first hand. After careful QC, the package is not sealed does not mean that it has been used.
ã€Keep Safe & Private】Cranach cabinet locks aim to lock the cabinets so that others cannot open and get the items inside easily. The cabinet locks with keys are essential for cabinets and drawers at home, keep your little ones from being able to get dangerous cutlery, cleaning supplies or medications that could potentially harm them. It helps to add extra safety for your important files as well..
ã€Dimension & Specification】The file cabinet lock has a 1-1/8" cylinder length and 1.85" lock plate, can fit the material thickness of up to 1". It is a standard size cam lock with 3/4" diameter. The cam lock opens with a 90-degree turn. The two-sided key eliminates the trouble of paying attention to key orientation in the lock when using it in the dark. And it is non-key retaining - the key can be removed from the lock from the locked and unlocked position.
$234
I used these two locks for the storage doors on my travel trailer, and even after being exposed to a lot of rain and intense heat in Texas, they fit well and showed no signs of rust or corrosion. The keys fit securely in the key hole, and it's good that they are two-sided so that no matter which way you put it in, it will unlock. Installation just required a drill and power screwdriver. Excellent product with a range of cabinet thickness options up to 1 inch and a hefty latch that makes it highly secure and lasting. They come with four keys in case you lose one and a variety of locking mechanism tabs to match various door/enclosure styles. These locks functioned flawlessly and gave me reassurance that our possessions would be kept safe and secure.
4.6/5
Zinc die cast with a black powder coat finish
Clockwise and Counter Clockwise Set, Keyed alike
Mounting: Blind 1-1/2cc with 3/8" Lugs, Tapped 10-24 x 3/8"
2-1/4 inch Shaft Length
Keyed alike with K127 keyes (Two Keys)
$234
I am really pleased with the quality, feel, finish, etc. after installation. I'll shortly be repainting the outside housing because it isn't the same form as the original (see photo).I did come upon a potential stumbling block while installing, though. The T-handle layout necessitates that the lock's barrel travel through your door in order for a retention plate and screws to be used to fix it on the inside of the door (just like a door knob in your house). Two layers of aluminum plate with roughly a 1/2 inch between them make up my canopy (Leer) "distance between them The barrel can slide into and be fastened in a hole that has been bored through both sides. My old locks had a barrel diameter of 1/2", but the new ones had a barrel diameter of 5/8". (this is not mentioned in the specifications). The process of drilling out the aluminum for 5/8 was not difficult "simply be careful to maintain the alignment in the middle, else nothing will fit the mounting plate's studs and screws. Therefore, it would be excellent if you are handy, have the necessary tools, and the patience to arrange everything. You can only check your lock by taking it out, and the only way to know for sure these will fit is to order and use them.
4.4/5
EASY INSTALLATION: Please view the detailed instruction video on this page, with photos, top left 7th image
•NO DRILLING, NO SCREWS – {12 LOCKS & 2 KEYS] Aesthetic and Easy Installation. Adhesive Magnetic Cabinet Locks install inside cabinets or drawers, completely out of sight. {BONUS, ON/OFF SWITCH}
SAVE YOURSELF TIME AND EFFORT: Forget about drilling and struggling to install your child safety locks. These baby proofing cabinet locks are incomparably easy to install within minutes! You can also turn them on/off with a flip a switch
KEEP ALL YOUR CUPBOARDS AND DRAWERS SECURELY LOCKED: This must have set includes 12 baby proofing locks which provide you with countless options! Make it yours now and secure every cupboard and drawer that is exposed and easily accessible.
NEW IMPROVED EXTRA STRONG (UP TO 2 Inches) magnetic locks keep your baby perfectly safe and prevent accidents: If you have a baby or a young child, you know that cabinets and drawers are a lurking danger! Eco Baby presents you with an amazing set that includes 12 child safety magnetic locks and 2 keys which will eliminate the danger of accidents.
STRONG, DURABLE ADHESIVE TAPE: These child proofing cabinet and drawer magnetic locks feature an extremely strong 3M adhesive tape that will never succumb to tugging, discouraging even the most persistent baby!
$234
Such gorgeous locks! For the past seven years, I've used the same "traditional" locks on my cabinets, and several of them are slipping and no longer functional. It is simple and quick to change these locks. I'll confess that the first set I put in needed a few tweaks, but as I sorted out the positioning, the rest went together really quickly.Benefits: *Can be done without any tools. Simply remove the adhesive's backing and stick! To make sure you have it in the right position, I advise extremely little initial sticking. Locks have two settings: one lets you lock the cabinets (use the magnetic key to open), and the other lets you freely open the doors. If your children won't be around for a while, this will be useful. When locked, the doors don't even remotely open. Now that the door can open a few inches, my child won't pinch his fingers as he did with the older style locks. *Comes with two magnetic keys in case one is lost.Cons: *I love clear instructions, and these were quite poorly written. The first lock, however, was only installed after around 5 minutes of trial and error. The magnetic key opens the lock the easiest. I imagine that at some point, both keys will be misplaced, making it a little more difficult to unlock the cabinets. I tried a few things and used a powerful magnet to unlock the door. Regular, thin refrigerator magnets were ineffective.Overall, I'm ecstatic about my purchase! Perhaps I'll purchase a second set for my bathrooms. I enjoy producing insightful assessments. Please click "yes" below if you found this review to be useful and would like to encourage me. Thanks!
4.4/5
Fits glass up to 0.47" thick (most typical retail display cases)
Able to lock multiple retail display cases with one key
Easy to install - slips on edge of glass door at any location (no boring required)
Keyed alike with zinc alloy lock housing, chrome finish
Perfect for single glass door display cases, trophy cases, and retail cases.
$234
This product performs just as it should. Although it's not the best quality, the price is incredibly hard to surpass. I install these locks on some very sizable sliding glass-doored boa enclosures so I won't have to worry about the infant inadvertently opening one and letting a snake that is at least 6 feet long out. It makes life lot simpler for me to have the same set of keys. The only change I might want to make is to use rubber screw covers in place of the plastic ones. Overall, I believe it to be a decent but for the price.
4.3/5
SUITABLE FOR WOODEN CABINETS - RFID cards can work for 1.5" (max.) thick wood cabinet, and RFID tags can transmit through 1.2" (max.) wood. Fits doors up to 0"-1.2" thick, ideal of cabinets, lockers, cupboards, medical carts, data racks, gun boxes, safes.
MULTIPLE UNLOCK MODES - (1) Single Mode - One user card to unlock; (2) Dual Mode - 2 user cards together to unlock. Package includes: 1xLock,1xLatch, 2xRFID Tag, 2xRFID Card, 1x Screw Package,1x RFID Location Icon.
COMPACT SIZE & STURDY MECHANISM - Latch and mortise are made by metal, they are sturdy enough for the cabinets. DIY Installing: No Drilling, installed by screws easily. 15,000 openings from 2 x AA batteries.
HIDDEN LOCK INVISIBLE STYLE - Unlock the cabinet door without touching. RFID card / tags are portable and easy to store. Provides good safety protection of your personal items. Improve children's safety at home, avoid your kids free to open the drawers or cabinet doors.
ONE FOB ON MULTIPLE LOCKS - This RFID locks are programmable, and you can use one FOB (RFID card/tag) to unlock several cabinets. The only thing you need to do: program the keys into the locks before installation.
$234
A kitchen island with two drawers and two cabinet doors that open to a common area was what I was trying to find (liquor cabinet and sharp knives). I considered magnetic child locks because I didn't want obvious keyed locks but decided against them. Purchased one to try, then three more after realizing how well it performed. This lock and tongue latch are difficult to install because they are all on the inside and must properly line up.Prior to installing the locks, I had to glue supporting brackets to each tongue installation. Since I could access the cabinet doors from the opposite side with the door closed, I installed the cabinet doors first. I spent an hour on the first one adjusting the alignment. It took the second 20 minutes. The doors, which are just under 1/2" thick, performed as intended.However, opening the drawers was rather difficult. Working out the tongue's depth and alignment to match with the drawer bases took a lot of time. I completed one, tried it, but I was unable to get it to open consistently (maybe 1 out of 10 tries). I had set up the two blue fobs to be used frequently as the master and a large white card. Most of the time, the master card would function, but the fobs would not. The thickness of the drawer wall plus the outer face was 1-1/16". Despite the 1.2" maximum claim, it would not function.I disassembled the base to check whether the RFID antenna might be improved. It is connected with flimsy, thin wires. Although I considered running these wires outside the base, I knew I would regret it if I harmed the wires. I made the decision to cut a hole in the plastic's back to try to get reception. It was a failure. Finally, the drawer's inside wall had to be removed to make room for the base. In order to clear the inside tongue latch, I also had to cut a notch out of the drawer's back wall. This left the same 1/2" thickness on the front side as the cabinets, which worked wonderfully. I think the entire process took me three hours. I figured out how to align everything and where to make the cuts on the last drawer. It took an hour for that.Having learned what I know now, getting the alignment and depth right is the most difficult component. Here's how I would install it if I could do it over again:- Once the cards were programmed, I would clasp the tongue and determine how near the edge the base needed to be for the tongue to be flat when put on the cabinet side. Fix the base.- Mark the location of the base receiver's center on the cabinet side after installing the base. Your tongue should be aligned in that side-to-side position.- Two center screw holes are on the tongue. One is static, and the other is an ellipse that can be moved to change the depth. It only provides around 1/8" of play, which is inadequate. To give it greater depth play, use a drill to remove the wall between the oval and the static screw hole. You can reach the ideal depth by tightening it a little at a time and experimenting. (I would advise the manufacturer to make this one very huge sliding oval.)- After determining the ideal depth, fasten it with two screws, one on each side.Now that it's finished, I'm quite happy with how these work. It has a modern appearance and gives me the security I desired. Given that they are kitchen cabinets, they could undoubtedly be forced open. But it wasn't what I was attempting to stop. Although I was aware that the installation would be challenging, I nevertheless gave it five stars. I also have two fobs that are configured for each lock as well as the same master card. I was left with 3 cards and 6 extra fobs.
4.3/5
MULTIPLE UNLOCK MODES - (1) Single Mode - One user card to unlock; (2) Dual Mode - 2 user cards together to unlock. Package includes: 1xLock,1xLatch, 2xRFID Tag, 2xRFID Card, 1x Screw Package,1x RFID Location Icon.
HIDDEN LOCK INVISIBLE STYLE - Unlock the cabinet door without touching. RFID card / tags are portable and easy to store. Provides good safety protection of your personal items. Improve children's safety at home, avoid your kids free to open the drawers or cabinet doors.
COMPACT SIZE & STURDY MECHANISM - Latch and mortise are made by metal, they are sturdy enough for the cabinets. DIY Installing: No Drilling, installed by screws easily. 15,000 openings from 2 x AA batteries.
SUITABLE FOR WOODEN CABINETS - RFID cards can work for 1.5" (max.) thick wood cabinet, and RFID tags can transmit through 1.2" (max.) wood. Fits doors up to 0"-1.2" thick, ideal of cabinets, lockers, cupboards, medical carts, data racks, gun boxes, safes.
ONE FOB ON MULTIPLE LOCKS - This RFID locks are programmable, and you can use one FOB (RFID card/tag) to unlock several cabinets. The only thing you need to do: program the keys into the locks before installation.
$234
A kitchen island with two drawers and two cabinet doors that open to a common area was what I was trying to find (liquor cabinet and sharp knives). I considered magnetic child locks because I didn't want obvious keyed locks but decided against them. Purchased one to try, then three more after realizing how well it performed. This lock and tongue latch are difficult to install because they are all on the inside and must properly line up.Prior to installing the locks, I had to glue supporting brackets to each tongue installation. Since I could access the cabinet doors from the opposite side with the door closed, I installed the cabinet doors first. I spent an hour on the first one adjusting the alignment. It took the second 20 minutes. The doors, which are just under 1/2" thick, performed as intended.However, opening the drawers was rather difficult. Working out the tongue's depth and alignment to match with the drawer bases took a lot of time. I completed one, tried it, but I was unable to get it to open consistently (maybe 1 out of 10 tries). I had set up the two blue fobs to be used frequently as the master and a large white card. Most of the time, the master card would function, but the fobs would not. The thickness of the drawer wall plus the outer face was 1-1/16". Despite the 1.2" maximum claim, it would not function.I disassembled the base to check whether the RFID antenna might be improved. It is connected with flimsy, thin wires. Although I considered running these wires outside the base, I knew I would regret it if I harmed the wires. I made the decision to cut a hole in the plastic's back to try to get reception. It was a failure. Finally, the drawer's inside wall had to be removed to make room for the base. In order to clear the inside tongue latch, I also had to cut a notch out of the drawer's back wall. This left the same 1/2" thickness on the front side as the cabinets, which worked wonderfully. I think the entire process took me three hours. I figured out how to align everything and where to make the cuts on the last drawer. It took an hour for that.Having learned what I know now, getting the alignment and depth right is the most difficult component. Here's how I would install it if I could do it over again:- Once the cards were programmed, I would clasp the tongue and determine how near the edge the base needed to be for the tongue to be flat when put on the cabinet side. Fix the base.- Mark the location of the base receiver's center on the cabinet side after installing the base. Your tongue should be aligned in that side-to-side position.- Two center screw holes are on the tongue. One is static, and the other is an ellipse that can be moved to change the depth. It only provides around 1/8" of play, which is inadequate. To give it greater depth play, use a drill to remove the wall between the oval and the static screw hole. You can reach the ideal depth by tightening it a little at a time and experimenting. (I would advise the manufacturer to make this one very huge sliding oval.)- After determining the ideal depth, fasten it with two screws, one on each side.Now that it's finished, I'm quite happy with how these work. It has a modern appearance and gives me the security I desired. Given that they are kitchen cabinets, they could undoubtedly be forced open. But it wasn't what I was attempting to stop. Although I was aware that the installation would be challenging, I nevertheless gave it five stars. I also have two fobs that are configured for each lock as well as the same master card. I was left with 3 cards and 6 extra fobs.
4.3/5
PROTECT YOUR CHILD FROM DANGER – inquisitive toddlers and children don’t realise the risks of pulling themselves up on furniture and what dangers can lie behind closed cabinet doors. Add our infant safety locks to your furniture as an extra layer of protection
MADE FROM SAFE MATERIALS – our multifunctional safety locks are made from super strong and robust ABS+TPE plastics which contain no nasty chemicals that can affect your child’s health and development. Be wary of cheap, dangerous alternatives and instead opt for our approved locks for complete peace of mind
QUICK AND EASY INSTALLATION – childproof your home has never been easier. Apply the baby security locks onto your chosen cabinets and click the lock into place,No Tools or Drilling Required.They are incredibly easy for adults to unlock but children just cannot access them making them perfect for keeping your little one safe
MULTIPURPOSE BABY PROOFING – baby locks with 6 locks in every pack you can secure cabinets in the kitchen,garbage can,toilet lid,bathroom, trash cans, refrigerators, freezers, dresser drawer,washing machine,dishwasher and more. Keep your child away from harmful cleaning products, cutlery and other dangerous items with our easy to install children handle locks
NO IMPACT ON YOUR DAILY ROUTINE – we’ve designed our baby safety drawer locks to have little impact on you as you go about your daily routine. You will still be able to access your cabinets and cupboards with no damage to your furniture at all
$234
excellent product. My 3-year-old daughter and 15-month-old son would spend the entire day opening the freezer and drawers in our French door refrigerator. They would take food out and either feed the dog with it or just put it on the ground. This has been a remarkable phenomenon. My toddlers can't use it, but it's simple to install and simple to use. For us, it has been incredible.
4.2/5
NOTE – Each case shipped to Amazon contains a random mix of keys - if you order more than one package, there is a slight possibility you may receive the same key number
PRODUCT INFO - This lock features a ¾†outside cylinder diameter with a 1-1/8†length that will accommodate up to 13/16†thick panels.
DURABLE CONSTRUCTION – This drawer and cabinet lock is constructed of diecast and steel components with a stainless steel finish. It’s durable and strong, perfect for keeping your small items safe.
COMES COMPLETE - This drawer and cabinet lock comes complete with 3 cams, a trim collar, 2 reversible rotation washers, 2 keys and fasteners. Keyed Different, Yale Y-11 keyway.
SECURE CABINET DOORS AND DRAWERS – This U 9945 lock can be used to secure cabinet doors, drawers and much more.
EASY INSTALLATION - Installation is quick and easy – additional security for your small items and drawers are within reach! It can be mounted to metal or wood, door and/or drawer panels.
$234
A few days before my emissions test, some jerk attempted to pry off my locking gas cap and damaged it. As a result, a "Check Gas Cap" warning and subsequently a "Check Engine" light came on. I had to purchase a new locking gas cap and reset the annoying Check Gas Cap warning by briefly disconnecting the battery's negative terminal. The dealership wanted an hour's worth of labor and a full diagnostic to turn off the annoying light, and they claimed that doing so would not remove the warning. And they wonder why I don't go there anymore? Since my Ranger didn't come with one, I decided to install a lock on the gas cap lid after passing inspection. However, I was unable to locate any Ford or after-market locks, so I figured any cabinet lock would surely work, and it did. In hindsight, I should have ordered one with a shorter cylinder, but this one works. Just used a 3/4" hole saw (which cost more than this lock!) to make the necessary hole after carefully drilling a pilot hole. I double- or triple-checked my measurements to make sure I would have enough space, wouldn't damage the gas cap, and that the locking tab would fit snugly behind the metal protrusion that serves as the lid's stopper. Really not that difficult.
4.2/5
COMES COMPLETE - This drawer and cabinet lock comes complete with 3 cams, a trim collar, 2 reversible rotation washers, 2 keys and fasteners. Keyed Different, Yale Y-11 keyway.
DURABLE CONSTRUCTION – This drawer and cabinet lock is constructed of diecast and steel components with a stainless steel finish. It’s durable and strong, perfect for keeping your small items safe.
EASY INSTALLATION - Installation is quick and easy – additional security for your small items and drawers are within reach! It can be mounted to metal or wood, door and/or drawer panels.
SECURE CABINET DOORS AND DRAWERS – This U 9941 lock can be used to secure cabinet doors, drawers and much more.
PRODUCT INFO - This lock features a ¾†outside cylinder diameter with a 5/8†length that will accommodate up to 5/16†thick panels.
$234
I have relocated a few times at work due to building redesigns, closures, etc., and since I am always the "new" guy, I always end up with leftover and abandoned furniture and bookshelves, and they NEVER EVER have matching keys. Locks are present, but keys are not. Other times, they are mystery objects, and I am unable to learn enough about them to get keys. In some cases, I can identify the maker and obtain keys. Although it would probably cost me as much to disassemble them and transport them to the lock smith as to simply replace them, I suppose I could do that. And some of them are so damaged that I still desire new ones.These work fantastically to replace lock sets. Although these come with the majority of the pieces I require, occasionally I do need to utilize a washer, a unique latch, or another item that was on the no-key set I am removing. They seem to be rather common, and I haven't had any particularly odd holes in my desk or other furniture to fill. The depth might fluctuate, but the majority of things are relatively similar and functional (with maybe a washer or something.) I can now lock my belongings. In the past three years, I'm positive I've done this to at least six or seven objects. I usually tape the keys in the drawer whenever I leave a desk or cupboard. Why aren't more people doing this? I will simply hand over the keys to the person taking my office if I know who it is; however, if it's some jerk who was unpleasant to me, I don't. Ha ha!!!
COPYRIGHT © 2019
