Bolt cutters are a handy tool to have around, and they are relatively easy to use. The cutting head is designed to grip and cut through bolts and other metal objects. The handles are usually adjustable, so you can customize the size and leverage to suit your needs. Some bolt cutters even come with a built-in wire cutter.
A bike chain is made up of metal links that are held together by rivets. The links are also held together by a pin that goes through the center of the link. A bike chain is very strong and can be very difficult to cut with a bolt cutter. However, if you have a strong bolt cutter and you are able to get a good grip on the chain, you may be able to cut it.
Yes, a Dremel can cut a bolt. You will need to use a cutting wheel designed for metal to do this. Be sure to wear eye and ear protection when using the Dremel.
Bolt cutters are designed to cut through metal, but the type of metal will determine how easy or difficult the cutting process is. Hardened steel is one of the most difficult metals for bolt cutters to cut through, but it is not impossible. The cutting process will take longer and require more effort than cutting through softer metals, but it can be done.
4.9/5
For use on hardwoods and composite decking.
For use with 1" or thicker decking.
For use with many hand held routing tools
Carbide tipped - 3 wings for long-term performance
This is designed for use with the Tiger Claw TC-G Deck Clips
$234
I chose to utilize Trex composite lumber when I had to replace the steps on my deck. The only drawback is that Trex is available with either finished or grooved edges. Use of the concealed fasteners is made easier by grooves. However, you want a polished edge to show at the very end. The slot cutter is useful in this situation. It performed admirably and blended it well with the factory finishes. I advise utilizing a router table. The table and a few extra hands make the job of grooving 18 foot boards easier for me. In comparison to what other places were charging, the price was also reasonable.
4.8/5
Cutting Edges Induction Hardened, Cutting Edge Hardness Approximately 64 HRC
Chrome Vanadium Electric Steel, Oil-Hardened and Tempered
Exceptional Cutting Performance with Minimum Effort Due to Lever Action Design
Cuts Material like Bolts, Nails, Rivets up to 5.2mm
Plastic Coated Handles
$234
These are exceptional cutting pliers ideal for wire with a diameter of 1/8" to approximately.025". Strong leverage makes cutting wire simple. quite durable. My previous pair lasted five years and performed admirably. I handle these pliers at least ten times every day while producing components on CNC wireform machinery, so I use them EVERY DAY. occasionally hundreds. I've been use this KNIPEX model exactly for at least ten years. twice replaced due to wear.Avoid using them to push and grab thick wire with the cutting jaws as this could damage the cut edge. You'll love them if you only use them for cutting.
4.8/5
Induction-hardened precision blades with cutting edge hardness approximately 64 HRC for long life
For powerful cutting of large cross-sections as well as very hard materials with a diameter up to 0.157 inches
Because of the high transmission ratio, the cobolt lowers the hand force needed for cutting different materials by 60%
German chrome vanadium heavy-duty steel, forged, and oil-hardened
Gripping surface below the joint for gripping and pulling nails or wires with a diameter from 0.039 in
$234
These are exceptional cutting pliers ideal for wire with a diameter of 1/8" to approximately.025". Strong leverage makes cutting wire simple. quite durable. My previous pair lasted five years and performed admirably. I handle these pliers at least ten times every day while producing components on CNC wireform machinery, so I use them EVERY DAY. occasionally hundreds. I've been use this KNIPEX model exactly for at least ten years. twice replaced due to wear.Avoid using them to push and grab thick wire with the cutting jaws as this could damage the cut edge. You'll love them if you only use them for cutting.
4.7/5
uts components like bolts, nails, rivets, etc. up to 5.2 mm dia
Cutting edges additionally induction hardened, cutting edge hardness approx 64 hrc
Opening spring with locking device integrated in the handles for comfortable working and secure transport
Exceptional cutting performance with minimum effort because of new lever action design
$234
In my spare time, I manufacture chainmail using high-carbon steel piano wire and a.071-inch diameter "diameter. I only produce coils that are around 5/16 in diameter "Therefore, when cutting the coil into rings, bolt cutters are frequently too large to fit inside. My initial plan was to use a Dremel with a cutting disc, but the wire is so sturdy that it would soon consume the discs and create a mess, not to mention the length of time it would take to cut a full coil. The piano wire dented every high leverage cutter I tested, despite the fact that they were all made in China. I came into these at that time as I was looking around. Expensive? Yes. But due of their positive reviews, I chose to give them a shot, and I'm glad I did. KNIPEX now has a continual, devoted client! Already considering purchasing additional KNIPEX goods These tools are so well built and durable that the cost was well spent. They transport me back in time to when my Grandpa had his ancient but reliable tools from the 1940s and 1950s made of good ole American steel in his workshop years ago. Sadly, the American market no longer values quality... THANK GOD the Germans do! Absolutely worth the cost! Do yourself a favor and buy one quality tool rather than using up 10 cheap ones; you'll wind up saving money!
4.4/5
Extremely handy for cutting on the go
Easily cut through wires, threaded rods, bolts, chains, and more
Double heat treated CrMo blades cut through tough materials with a vengeance
High leverage design gives you more force with less effort
Specially designed ergonomic grips make these cutters comfortable and secure
$234
These are excellent for the price, but I might caution you that if you attempt to cut through strong material, the blades will snap. Mine did after using it for approximately a month. Uncertain if it was a flaw or not. Still, it's value for money. I'm not sorry I bought them. I only wish the blades were more robust.edit: The blades broke after a short period, therefore I originally gave these 4 stars. Even though I had already thrown them out, the business contacted me after I posted the aforementioned review and offered to replace them without charge. Guys, this product is fantastic, and the company is even better. Buy these small bolt cutters if you're going to purchase any at all. You won't be sorry.
4.3/5
Ideal for cutting soft metal, bolts, rods, rivets and chain
Cutting Capacity: HRC≤42: 7/32-inch(5mm Maximum);HRC<25: 1/4-inch(6mm Maximum)
Note: cutting locks is not recommended
Classic lever-fulcrum design and precisely aligned blades deliver added leverage with less effort
Drop forged chrome molybdenum steel and powder coated jaws for sure, efficient cutting and long life. Ergonomic bi-material Anti-slip grips provide greater control and comfort in cutting
$234
I purchased these bolt cutters to remove some tree stumps that had grown into some chain link fencing. These bolt cutters performed admirably. They were simple to operate and provided good leverage thanks to their small size and handle grips.Although I haven't tried them on anything else yet, I believe they could cut through thicker metal as well.I'm quite happy with them and I don't have to borrow anything from my neighbour anymore!
4.3/5
ONE OF KIND DESIGN: Gunpla Heavy-Duty End-Nipper Cutting Pliers has an over 2 in. jaw clearance to grip large objects. uses a knife and anvil style cutting edge to ensure perfect mating and superior cutting-edge life.
APPLY ON: Gunpla Heavy-Duty End-Nipper Cutting Pliers has perfectly mated cutters with anvil and knife style edges designed for flush cutting nails, wire, spokes and other metals. Jaw clearance exceeds 2 in. on this heavy-duty tool, which is precision-made with high-carbon steel for superb performance and lasting durability.
ONE TOOL THAT PERFORMS TWO JOBS: You can use Gunpla Heavy-Duty End-Nipper Cutting Pliers to cut nails or pull them out from board. It is a must have if you are planning to rip off old carpet or install wood floors.
CUSTOMER SERVICE: Offering 100% Satisfaction and 30-day Money Back & Lifetime Warranty on All Gunpla brand tools and supplies which covers any quality, reliability and performance issues.
MADE WITH: we are serious with our quality when it comes to our tools. Gunpla Heavy-Duty End-Nipper Cutting Pliers is made with premium high-carbon, drop-forged, polished steel for durability and an electronic coating to help prevent rusting. The high leverage vinyl-dipped handles provide exceptional leverage and have a comfort-grip coating for firm command and control. It is sharp and safe.
$234
works like nothing else, even when the head is snapped off! removing flooring with a number of rusty, weak ring-shank nails, the heads of which snapped off. When there was little more than a tiny nail jutting up, I used these pliers and quickly removed it! Would prefer if the handle were a little bit longer, however I was using it in an extreme situation. Regular nails are easy to remove, but even the worst, twisted, and ring-shank nails can be pulled out.
4.3/5
Ergonomic bi-material anti-slip grips provide greater control and comfort in cutting
Classic lever-fulcrum design and precisely aligned blades deliver added leverage with less effort
Ideal for cutting soft metal, bolts, rods, rivets and chain
Cutting Capacity: HRC≤42: 1/4-inch(6mm Maximum);HRC<25: 5/16-inch(8mm Maximum)
Drop forged chrome molybdenum steel and powder coated jaws for sure, efficient cutting and long life
$234
I purchased these bolt cutters to remove some tree stumps that had grown into some chain link fencing. These bolt cutters performed admirably. They were simple to operate and provided good leverage thanks to their small size and handle grips.Although I haven't tried them on anything else yet, I believe they could cut through thicker metal as well.I'm quite happy with them and I don't have to borrow anything from my neighbour anymore!
4.3/5
Ergonomic bi-material anti-slip grips provide greater control and comfort in cutting
Ideal for cutting soft metal, bolts, rods, rivets and chain
Cutting Capacity: HRC≤42: 5/16-inch(8mm Maximum);HRC<25: 25/64-inch(10mm Maximum)
Drop forged chrome molybdenum steel and powder coated jaws for sure, efficient cutting and long life
Classic lever-fulcrum design and precisely aligned blades deliver added leverage with less effort
$234
I purchased these bolt cutters to remove some tree stumps that had grown into some chain link fencing. These bolt cutters performed admirably. They were simple to operate and provided good leverage thanks to their small size and handle grips.Although I haven't tried them on anything else yet, I believe they could cut through thicker metal as well.I'm quite happy with them and I don't have to borrow anything from my neighbour anymore!
4.3/5
Manufactured in United States
Made of shock-resistant and heat treated S2 steel for maximum strength and hardness
Ideal for maintenance and repair work
$234
In my 1937 Ford, I made every effort to remove a severely rounded brass oil drain cap. Prior to this tool, everything I did simply made the rounded plug worse.I originally encountered the drain stopper as a 3/4" hex. I selected a 13/16" extractor tool since I was very certain that a 3/4" tool would be too large to hold due to the plug's sharp rounding. The drain plug has to be filed slightly in order to work with the 13/16' extractor. However, as soon as the tool began to fit on the drain plug with a SLIGHT TAP from a hammer, it bit into the plug and became more secure as the tool was rotated counterclockwise with a ratchet, making it simple to remove.
If you have a pair of bolt cutters that are big enough, you can cut through a hardened lock. It will take some time and effort, but it can be done.
Bolt cutters need to be sharp in order to work properly. If they are not sharp, they will not be able to cut through the material they are supposed to be cutting. This is why it is important to make sure that your bolt cutters are always sharpened before you use them.
If you need to remove a lock without a bolt cutter, you can use a hammer and chisel. First, find the locking pin on the back of the lock. Then, use the chisel to score a line around the circumference of the pin. Next, use the hammer to carefully tap the chisel around the scored line until the pin pops out. Finally, remove the locking pin from the back of the lock.
Bolt cutters are designed to cut through tough metal objects, such as bolts and chains. They come in a variety of sizes, with the larger ones capable of cutting through thicker metal. The thickness of the metal object that a bolt cutter can cut through depends on the size and strength of the cutter.
Bolt cutters come in a variety of sizes, and the size you need depends on what you need to cut. 14 inch bolt cutters can cut through smaller bolts, nails, and other metal objects. If you need to cut through larger objects, you will need a larger size.
18 inch bolt cutters are great for cutting through bolts, nails, and other metal objects. They can also be used to cut through wood and other materials.
COPYRIGHT © 2019