Ram air is most effective at high speeds, where the air pressure is greatest. The faster you go, the more air pressure is forced into the intake, and the more power your engine will make.
A cold air intake can mess up your engine if it is not installed properly. If the air intake is not sealed properly, it can allow dirt and other debris to enter the engine, which can cause damage.
A cold air intake is one of the easiest and most effective ways to add horsepower to your car. They work by bringing in cooler, denser air from outside the engine bay, which means more oxygen for the combustion process. Most cold air intakes will come with a tune, but you don't necessarily need one. If you have a simple CAI with no other modifications, you can get away with just a simple ECU reflash. However, if you have a more complex setup with an aftermarket airbox or larger filter, you will need a custom tune to make
A cold air intake will help a 5.7 Hemi by increasing airflow and improving engine efficiency. The increased airflow will allow the engine to breathe better and make more power. The improved engine efficiency will result in better fuel economy.
4.7/5
MOOSUN intake systems are designed to dramatically reduce intake restriction as they smooth and straighten air flow. The kit replaces your vehicle's restrictive factory air filter and air intake housing.Lasts up to 100,000 miles before service is required (depending on driving conditions)
ã€unique】The kit includes a intake tube and steel heat shield that features a durable carbon-black powder coating for long lasting good looks
Fit for GMC 1999-2006 Sierra 1500 & 2007 Sierra 1500 Classic & 2001 2002 2003 2005 2006 Sierra 1500 HD & 1999-2004 Sierra 2500 & 2001-2006 Sierra 2500 HD & 2000-2006 Yukon & 2002-2006 Yukon XL 1500/2500
Fit for Chevrolet 2002-2006 Avalanche 1500 & 1999-2006 Silverado 1500 & 01 02 03 05 06 Silverado 1500 HD & 1999-2006 Silverado 2500 & 2001-2006 Silverado 2500 HD/3500 & 2000-2006 Suburban 1500/2500/Tahoe & 2007 Silverado 1500 Classic/1500&2500 HD Classic(Please MATCH your vehicle on the left top)
Improves Up to 95% Filtration Efficiency; Designed to increasing 5-10% horsepower & 6-10% torque, and creating an attractive intake noise. No additional parts will be needed for installation after you purchase this kit,Easy to install performance
$234
Your text will be rewritten by QuillBot. Start by typing or pasting something into this box, then hit the enter key.
4.6/5
√ Easy to install and easy to fit with simple tools
√ For 1999 2000 2001 2002 2003 2004 2005 2006 V8 4.8L/5.3L/6.1L(Don't fit 2006 ford f250 lariat 6.0)
√ It can increase 8-10% of Horsepower and 6-9% of torque
√ It's the ultimate performance Cold Air Intake Kit with Heat Shield
√ The air intake kit can help your engine to draw in more cold air resulting in better throttle response and higher explosive horsepower output
$234
Very simple to install; people who complain that they needed instructions or that it was challenging to install certainly shouldn't be working on their own cars. A little bit of problem-solving and common sense goes a long way. Due to difficulties I encountered removing my old MAF sensor from the current air box, this installation took about 45 minutes. The MAF sensor adaptor is simply a small rubber boot; when I installed it, it was too big to fit over my old MAF sensor, but as you gradually tighten the clamp, it will begin to taper and take shape. I will need to loosen up a few pieces in order to clean or replace the filter because it is a very tight fit inside the new air box/heat shield. I would advise adding a pre-filter on top of this filter to assist catch smaller dust particles and prevent them from entering the air intake or lubricating the filter to catch the really microscopic dust particles. Be careful not to overtighten the clamps; instead, gently snug them up. I'd swap out the clamps for nicer ones. It costs a fourth as much as the K
4.5/5
Fit for Cadillac 1999-2000 Escalade & 2002-2006 Escalade/Escalade EXT & 2003-2006 Escalade ESV (Please MATCH your vehicle on the left top)
Fit for GMC 1999-2006 Sierra 1500 & 2007 Sierra 1500 Classic & 2001 2002 2003 2005 2006 Sierra 1500 HD & 1999-2004 Sierra 2500 & 2001-2006 Sierra 2500 HD & 2000-2006 Yukon & 2002-2006 Yukon XL 1500/2500
Million Parts intake systems are designed to dramatically reduce intake restriction as they smooth and straighten air flow. The kit replaces your vehicle's restrictive factory air filter and air intake housing.Lasts up to 100,000 miles before service is required (depending on driving conditions)
High quality and efficient air intake system, fits automatic and manual transmission, the filters are washable, reusable and easy to install with tools commonly available
Fit for Chevrolet 2002-2006 Avalanche 1500 & 1999-2006 Silverado 1500 & 01 02 03 05 06 Silverado 1500 HD & 1999-2006 Silverado 2500 & 2001-2006 Silverado 2500 HD/3500 & 2000-2006 Suburban 1500/2500/Tahoe & 2007 Silverado 1500 Classic/1500&2500 HD Classic
$234
well worth the $40 or so.The chrome intake tube was bubble-wrapped, yet despite that, it appeared to have taken a beating. I doubt that any area is more than three inches away from another without a damage, ding, or significant scratch.NONE. Just a box with various pieces scattered within.I've already installed the $250 ones, and this $40 one is next.Understand the distinction?210 dollars and a few minor errors.Installing took me less than 15 minutes. Remember: Don't overtighten the clamps! Tighten until they can no longer move, then stop (I didn't, but I see hundreds on here who have).installed in the controversial L33 LS6 engine-powered 2006 Sierra HD. Nothing should be changed; simply remove the old and place it in the box (NEVER dispose of the old stuff... ever.) install the new components. didn't require instructions, but come on, it's cheap. Nevertheless, I don't believe including a single sheet of paper in the box with directions for installing one would significantly affect their profit margin.Since you should be wrapping the tube in heat-resistant wrap anyhow to squeeze out an extra 5 to 10 degrees of chilly air, the cosmetics shouldn't be a problem for anyone. (Intake wrap or header tape work well)Another method I use with my trucks that is incredibly effective Your throttle body is kept hotter than necessary by the coolant tube that runs to it (and back out) (they did this for northern climates to reduce tb vane freezing) Take both hoses out of the tb and connect them using a tee. Now that it's 80 degrees cooler, your TB...Thank you very much.
4.5/5
Intake tube is constructed with durable lightweight aluminum and a textured wrinkle black finish.
RedRock 4x4 parts are for the off-road enthusiast who knows you don’t need to spend a fortune to make your Jeep more functional. Your rig is not only guaranteed to look great but can also be put to the test on the trail next to other top-quality brands.
Save money with the reusable conical filter. No need to purchase new filters every few thousand miles – just clean the filter, re-oil it and go. A practical modification for on or off-road Jeep owners.
Easy installation with just basic hand tools, and no computer re-tune is required for operation. All parts and instructions are included.
Add horsepower and torque and improve your throttle response to your Wrangler.
$234
I would have given this product five stars but the directions were confusing. I was able to figure them out, but someone who is not particularly mechanically inclined could find it challenging. In terms of performance, there has been a significant improvement in get-up-and-go. Previously, this vehicle was a dog and could accelerate from 0 to 60 miles per hour in less than 10 minutes. I haven't had it on long enough to determine if the mileage in Gaza has increased significantly, but I guess the horsepower has increased by about 10-15. Very happy with the performance and price. Any owner of a 2007–2011 JK Unlimited with the 3.8L and the standard 6 speed transmission should without a doubt consider purchasing this. The 2011 Jeep that I own in two-door form with the automatic transmission doesn't lose horsepower like the four-door conventional transmission does.
4.4/5
ULTIMATE LONGEVITY: 10-Year/Million Mile Limited Warranty protects for the life of your vehicle
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools, K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
IMPROVED ENGINE SOUND: Hear the power under the hood
$234
On my 2015 RAM 1500 with the 5.7L Hemi, I put this intake in. Up until the point where you cut your OEM crankcase tube and "slide" the K
4/5
ULTIMATE LONGEVITY: 10-Year/Million Mile Limited Warranty protects for the life of your vehicle
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools, K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
IMPROVED ENGINE SOUND: Hear the power under the hood
$234
Very simple to install; people who complain that they needed instructions or that it was challenging to install certainly shouldn't be working on their own cars. A little bit of problem-solving and common sense goes a long way. Due to difficulties I encountered removing my old MAF sensor from the current air box, this installation took about 45 minutes. The MAF sensor adaptor is simply a small rubber boot; when I installed it, it was too big to fit over my old MAF sensor, but as you gradually tighten the clamp, it will begin to taper and take shape. I will need to loosen up a few pieces in order to clean or replace the filter because it is a very tight fit inside the new air box/heat shield. I would advise adding a pre-filter on top of this filter to assist catch smaller dust particles and prevent them from entering the air intake or lubricating the filter to catch the really microscopic dust particles. Be careful not to overtighten the clamps; instead, gently snug them up. I'd swap out the clamps for nicer ones. It costs a fourth as much as the K
3.9/5
Million Parts intake systems are designed to dramatically reduce intake restriction as they smooth and straighten air flow. The kit replaces your vehicle's restrictive factory air filter and air intake housing.Lasts up to 100,000 miles before service is required (depending on driving conditions)
Fit for GMC 1999-2006 Sierra 1500 & 2007 Sierra 1500 Classic & 2001 2002 2003 2005 2006 Sierra 1500 HD & 1999-2004 Sierra 2500 & 2001-2006 Sierra 2500 HD & 2000-2006 Yukon & 2002-2006 Yukon XL 1500/2500
High quality and efficient air intake system, fits automatic and manual transmission, the filters are washable, reusable and easy to install with tools commonly available
Fit for Chevrolet 2002-2006 Avalanche 1500 & 1999-2006 Silverado 1500 & 01 02 03 05 06 Silverado 1500 HD & 1999-2006 Silverado 2500 & 2001-2006 Silverado 2500 HD/3500 & 2000-2006 Suburban 1500/2500/Tahoe & 2007 Silverado 1500 Classic/1500&2500 HD Classic
Fit for Cadillac 1999-2000 Escalade & 2002-2006 Escalade/Escalade EXT & 2003-2006 Escalade ESV (Please MATCH your vehicle on the left top)
$234
well worth the $40 or so.The chrome intake tube was bubble-wrapped, yet despite that, it appeared to have taken a beating. I doubt that any area is more than three inches away from another without a damage, ding, or significant scratch.NONE. Just a box with various pieces scattered within.I've already installed the $250 ones, and this $40 one is next.Understand the distinction?210 dollars and a few minor errors.Installing took me less than 15 minutes. Remember: Don't overtighten the clamps! Tighten until they can no longer move, then stop (I didn't, but I see hundreds on here who have).installed in the controversial L33 LS6 engine-powered 2006 Sierra HD. Nothing should be changed; simply remove the old and place it in the box (NEVER dispose of the old stuff... ever.) install the new components. didn't require instructions, but come on, it's cheap. Nevertheless, I don't believe including a single sheet of paper in the box with directions for installing one would significantly affect their profit margin.Since you should be wrapping the tube in heat-resistant wrap anyhow to squeeze out an extra 5 to 10 degrees of chilly air, the cosmetics shouldn't be a problem for anyone. (Intake wrap or header tape work well)Another method I use with my trucks that is incredibly effective Your throttle body is kept hotter than necessary by the coolant tube that runs to it (and back out) (they did this for northern climates to reduce tb vane freezing) Take both hoses out of the tb and connect them using a tee. Now that it's 80 degrees cooler, your TB...Thank you very much.
There are a number of ways to add 100 horsepower to your car. You could install a bigger and better engine, add a turbocharger or supercharger, or install nitrous oxide injection. You could also make a number of other modifications to your car to improve its performance, such as upgrading the suspension, brakes, and tires. Whatever route you choose, make sure you consult with a professional to ensure that your car can handle the extra power.
A K&N cold air intake can add up to 21 more horsepower to a 5.7 Hemi engine. This can give your car the boost it needs to get up and going faster.
A Ram air intake is a type of air intake system that uses the forward motion of the vehicle to increase the pressure of the air coming into the engine. This increased pressure can add a significant amount of horsepower to the engine.
A cold air intake is an aftermarket assembly of parts used to bring cooler air into a car's internal combustion engine. The main benefit of a cold air intake is the increase in power that it can give your car. Colder air is denser than warmer air, and thus contains more oxygen. More oxygen in the air/fuel mixture means more power. In addition, a cold air intake can also improve your car's fuel efficiency.
A ram air intake is an aftermarket car part that increases airflow to the engine. It does this by using a scoop or baffle to force more air into the engine. Many people believe that a ram air intake will increase horsepower and improve performance. However, there is no scientific evidence to support these claims. In fact, a ram air intake can actually decrease performance by causing the engine to run leaner and hotter. If you are looking for an aftermarket car part to improve performance, a better option would be a cold air intake.
A short ram air intake is a type of engine air intake system that uses a shorter intake duct to bring air into the engine. This is different from a cold air intake, which uses a longer intake duct to bring in air from a colder, more dense location. Short ram intakes are typically less expensive than cold air intakes, and they can provide a small boost in power. However, they can also cause your engine to run hotter, which can lead to reduced engine life.
COPYRIGHT © 2019