Best Automotive Replacement Fuses in 2022

Last update: December 22, 2022

Can AutoZone replace a fuse?

Yes, AutoZone can replace a fuse for you.

Can I replace a 15-amp fuse with a 20 amp fuse?

Yes, you can replace a 15-amp fuse with a 20-amp fuse. However, doing so may cause the circuit to overload if there are too many devices drawing power from it.

Can I replace a 20 amp fuse with a 25 amp fuse?

Fuses are designed to protect circuits from overcurrent. Replacing a 20 amp fuse with a 25 amp fuse would allow more current to flow through the circuit, which could cause damage to the wires or start a fire.

Can I use a 30 amp fuse instead of 15?

If you have a 30-amp circuit and you need to use a 15-amp fuse, you can. It is not recommended, however, because it could create a fire hazard.


240 Pcs Blade Car Fuses Assortment Mini Truck Kit (2A/3A/5A/7.5A/10A/15A/20A/25A/30A/35A) Review:


Excellent product. To get the windshield washer pump operating, I just needed one fuse. I chose these after looking at the prices at the car parts store. A speedy delivery of a quantity that will last a lifetime. They operate flawlessly, and I now have extras in both vehicles thanks to the handy boxes for only a little bit more than what 12 fuses would have cost locally.



Abn 120-Piece Small Fuse Assortment – 5, 7.5, 10, 15, 20, 25, 30 AMP – Mini ATM/APM Blade Fuses for Cars, Trucks, Boats Review:


This product appeared in the search results when I quickly searched for ATT type low profile small fuse for Toyota. Right, a fuse is a fuse. They are a little bit different, I noticed when they arrived. (In the image, OEM dark blue is on top, and Abn light blue is below.) I'll still give it a shot and review it later, but it's odd that when I search from "My Amazon Garage," it informs me that this won't fit my Toyota and displays a bussman fuse. The bussman does have a similar appearance and provides detailed specs. The Abn and Bussmen are both described as low profile minifuses, which is weird. Update: Giving the fuse five stars because it fits and appears to be well-built.



242 PCS Blade Car Fuses Assortment Kit - MuHize Car Truck Standard & Mini (2A/3A/5A/7.5A/10A/15A/20A/25A/30A/35A/40A), Boat Car RV SUV Truck Camper Automotive Replacement Fuses Review:


After searching numerous stores and gas stations for fuses and the FUSE REMOVER, I decided to buy these fuses. I managed to buy a little variety package of fuses for a few dollars, however I found it VERY difficult to remove the fuse. The remover wasn't included in the package I purchased at the store.The following day, this fuse box and the fuse puller were bought. Now, both the box and the remover (provided with each package) remain in my glove compartment. Thank you for the wonderful price and vast amount of fuses!



Littelfuse 0ATO003.VP ATO 32 Volt 3 Amp Carded Fuse, (Pack of 5) Review:


On a really cold day, I blew a fuse because I didn't realize I needed to turn off the electricity when I switched from my previous thermostat to a Nest.Thank goodness for the internet since it didn't take me long to understand that a blown fuse in my furnace/forced air heating and cooling system was the reason of my thermostat's lack of power.This 3 amp fuse perfectly fit my control board! I'm not sure if automobile fuses are the same or not, but they seem a little bit smaller. Of course, it could just be my perception. Because another reviewer had highlighted the AC unit, I decided to get this one. And I want to add that I was able to change my control board fuse as well. As for whether it would be available locally or not, who knows.There aren't many 3 amp fuses; when I looked in my car, they were all 15 amp, 20 amp, etc. The mailman had my fuse 24 hours after I lost heat because I paid $6 to have it overnighted. I appreciate the fantastic product and the fantastic vendor.



Nilight GA0004 5Pack 12AWG Inline Wiring Harness 12 Gauge ATC/ATO Automotive Holder with 30A Fuse Blade Standard Plug Socket-5 Pack, 2 Years Warranty Review:


This is a well-made unit with a cap that tightly seals over the fuse and an inner conductor that is protected by a tough substance that can survive heavy use and abrasion. It is a pretty hefty conductor as well; although it is described as 10 gauge, I would estimate that it is heavier than that because I handle wire on a daily basis. Having said that, being heavier isn't necessarily a bad thing. After all, you don't want your fuse holder to melt when you need circuit protection! I had an issue since I was trying to find a tiny circuit protection device. Because I have connectors for that, I didn't care that it was 10 gauge. However, when I first got it, the conductor was too big, thus I was unable to use it with my connectors. This is still in my toolbox, however I substituted a small in-line holder because it can undoubtedly handle a larger (higher amperage) project down the road. If you need anything for higher amperage circuits requiring up to 30A of protection, I'd suggest it. Otherwise, bear in mind that the proper connectors for this huge conductor are required. Please refrain from trimming conductor strands to fit your connectors, like another reviewer did! Just be mindful of the size of the circuit you need to safeguard and purchase the appropriate components. You will need to find parts to fit this part into your existing circuit unless you settle for simple wire nuts, which would negate the waterproof/water resistant aspect. This part WILL work perfectly for lesser amperage fuses and projects. Enjoy!



GlowGeek 100pcs Assorted Auto Car Truck Standard Blade Fuse Assortment 2A 3A 5A 7.5 A 10A 15A 20A 25A 30A 35A Car Boat Truck SUV Automotive Replacement Fuses Review:


The pricing is wonderful, the fuses are excellent, and the container is excellent. The only thing about the fuses that I did not like was how poorly the amp values were marked on the fuse. What I mean by that is that, unlike other fuses that I have seen, this fuse's value is embossed rather than being accentuated by a contrasting color like white. It simply indicates that the fuse is a little more difficult to read, especially if you're older or attempting to find something in low light. I just deducted one star from the product for this reason. I would repurchase them since they are worth the price.



Bussmann Division BP/AGC-15-RP Agc-15 Auto Fuse Review:


I mistakenly believed that I was purchasing a fuse for a portable air compressor in my car to replace a busted one. The cost was fair. Even though the package arrived so quickly, there were actually five for the price of one. After I installed the replacement fuse, the compressor, which had four backup fuses, was ready to air the tires once more.


Can I use a higher amp fuse in my car?

If you are using a higher amp fuse in your car, it is important to make sure that the fuse is compatible with the car. Some cars may not be able to handle a higher amp fuse, and it is important to check with your car's manufacturer to be sure. If you are using a higher amp fuse, you may also need to upgrade your car's electrical system to accommodate the higher amp fuse.

Can you tell if a fuse is blown just by looking at it?

No, you cannot tell if a fuse is blown just by looking at it. The only way to tell for sure if a fuse is blown is to test it with a multimeter.

Do you have to disconnect the battery to change a fuse?

If you have to change a fuse, you will need to disconnect the battery. This is because the fuse box is usually located near the battery and you don't want to accidentally short circuit anything.

Does it matter what fuse you use?

No, it does not matter what fuse you use.

How do I know what fuses to buy for my car?

When you need to replace a fuse in your car, it is important to know which size and type of fuse to buy. The size is determined by the amperage rating, which is written on the side of the fuse. The type of fuse is determined by the car's make and model. You can usually find this information in the car's owner's manual.

How do I know what size fuse I need?

There are a few things you'll need to consider when deciding what size fuse to use: -The size and type of wire you're using -The amperage rating of your circuit -The maximum amperage of the fuse Generally, a fuse should be about the same size as the wire it's protecting. So, for example, if you're using 14-gauge wire in your circuit, you'll need a 14-gauge fuse. The amperage rating of your circuit is the maximum amount of