4.7/5
Rigorous and accelerated cycling tests to ensure product service quality and durability
OE-comparable harness (no pigtail connector) for hassle-free installation
Meet or exceed DOT/SAE standards with particular consideration for photometric and safety compliance
OE-comparable mounting provisions ensure drop-in precise fitment
Special coating on the lens surface prevents hazing and fading ensuring proper illumination and operational safety
$234
I have no idea how my original left turn signal lens broke, but the dealer gave me an installation price of $80. If my memory serves me well, the cost was $50 for the part and $30 for labor, however it may have been the other way around. Instead, I paid a total of $19.40 for this brand-new component. I was expecting a bulb to be inside when it arrived, so I now have one extra.I did my own signal lens replacement. Once I understood and followed the instructions to access the part, there were no issues at all with installing it. The need to remove some plastic push pin fasteners, which are extremely challenging to remove without breaking, made this task more challenging. Unlike the original right turn signal lens, the component fits flush with the body. To match this one, I should replace that one, but I'm too cheap.I really enjoy the way the new lens looks. It resembles the original equipment in terms of appearance, but when lit, it has a slightly different hue that might really be caused by the color of the bulb rather than the lens. (Before I bought it, I knew this potential would arise.) Compared to the original equipment, it appears a little finer. I've had it for about a month, and so far it's been working great. Barring the improbable circumstance that it, too, cracks, I anticipate it to last as long as the car.
4.6/5
Partsam Pack2 Square Trailer Clearance and Side Marker Light with Reflex Reflector - Amber
AMBER (Orange) rectangle clearance or side marker lights.
2-4/5" L x 2" W x 1-1/8" D; Reflectorized lens; corrosion resistant; mount on stud; 2-wire; 3 LEDs
The two-wire design includes the lead and ground wires to mount to any surface.
Stud Mount.This square light can be used as a clearance light or side marker light with side reflex. functions as both a marker and clearance light when mounted properly. This amber lens is reflectorized, meaning that a separate reflector is not needed.
$234
Four of these lights were ordered to install on my utility trailer. I have two LEDs and two conventional light bulbs. I just got all 4 so they would match because I was having trouble with one of the LEDs. Other reviews I read expressed dissatisfaction with the packaging and lack of an LED. Well, all four are LED lights with three bulbs. They were essentially packaged in a ziplock bag and sold in sets of two. Nothing spectacular in the way of instructions or graphics. Just the lights and a part number. They look fantastic now that I have them all connected. All of them are bright and in good working order. I am overjoyed.The amber lens cannot be changed, which is the sole drawback. The other lights had two screws that let you change the lens if one broke for some reason, but these did not. I think I'll order a new lamp if a lens breaks. They are incredibly affordable.
4.5/5
Can be used as an aux lighting to your existing brake light, but not approved as a brake light.
Partsam ( 2 x Amber ) 3/4" Side Marker light Grommet Mount Single Led, Clearance Marker and Auxiliary Stop Tail Turn Light.
Led Side Marker Light, Fender Marker Light, Clearance Light, Indicator lights, Aux stop turn tail brake light etc.
EASY TO INSTALL - 3 Wire Connections: Black is Negative, Red+Black - high brightness, White+Black - low brightness
Outer Diameter: 26mm (1.02''); Inner Diameter: 16mm (0.63''); Wire Length: 200mm (7.87''); Recessed mount with included grommet, INSTALLATION REQIURES A 3/4" HOLE AT DESIRED LOCATION;
$234
My Jeep TJ flat tube fenders are a true 3/4 fitting, and they work great. I simply wired it and popped them in. They are snugly comfortable. It has a three wire LED setup that allows it to be connected for turn signal and parking lights. They illuminate the garage at night and are visible throughout the day. They also have a respectable side light profile. The one-piece, sealed lens has a little dome to it. I put a second pair on either side like the factory setup because I like them so much. I wired them precisely the same as the front so that even when the parking lights are on and the signal is on, they will flash rather than turn off like the factory light would. Since I just installed them, I cannot say how long they will survive, but I believe that because they are LEDs, they should last a very long time. The front light plug on my jeep displayed ground, major, and minor. I therefore connected them as follows: Black to ground, Major (green with black stripe), Red wire, Minor black with green stripe, White wire. Everything functioned flawlessly, and I didn't need to install any load resisters or a special heavy-duty flasher because they flashed normally for me, but I'm not sure how the newer Jeeps would react.
4.2/5
CLIENT SUPPORT: 30-day money-back guarantee for any reason, 12-month warranty for quality-related issues. Please feel free to contact us at first if there is any problem when you receive or use our products. We are always here to support you.
EASY TO INSTALL: 2 copper wires connection, yellow one for positive "+" and black one for negative "-". Each side reflector light is fixed by 2 mounting screws, with mounting distance 3-3/8".
FITMENT TYPE: CZC AUTO amber side clearance lights is very suitable for marine boat trailer truck RV and all 12V vehicles.
SUBMERSIBLE: The side marker lights adopt ABS housing and PMMA lens, with sonic sealed for submersible. Waterproof rate IP68.
WIDE USAGE: The kit includes 2 side marker lamps and 4 mounting screws, can be widely used as side marker lights, clearance lamps, reflector ligths and also replacement for trailer running light. Each light has 4 LED, 2 more than normal similar lights. Brighter & Safer.
$234
Lights are fresh water submersible and have a nice initial aesthetic, but they are not intended or made for usage in salt water. Experience has shown me that the soft vinyl insulation will collect moisture and cause the untinned wire strands to rust. For use in salt water, pre-tinned wire with durable plastic insulation must be used to make lights. To increase the lifespan, I wrapped silicon rubber around the cables and connections.
4.1/5
During Checkout Your Quantity will Show as "1", This Represents "ONE PAIR".
Smoke lense with 12 Bright Amber LEDs. Can be Installed on Front or Rear.
Perfect fit 2013-2019 Honda Grom MSX125 with 2 Wires.
Easy to install -- STICK Right in Place-PERFECT!
You are Bidding on A Brand NEW Pair of LED EURO TURN SIGNALS.
$234
Purchased them since I destroyed the standard ones when doing a bad wheelie; they performed admirably even after numerous collisions.Additionally, it included the flash relay, which saved me from having to order anything else, which was wonderful. ALL-IN-ONE STORE.I've owned them for at least two years, so I figured I'd finally post a review.
3.9/5
Easy Installation, minor modification may be required.
Long lasting, and safety attached, it will give you extra safety while motorcycle at night.
High quality aluminum body, fast heat dissipation.
12 LED provide maximum visibility & safety.
Simple and convenient to keep it with you, a good assistant for motorcycle decoration.
$234
I adore them! They increase your 360-degree visibility, are bright and practical, look stylish, and increase your safety when riding at night. It's a terrific product. requires some labor, but after installation is complete, it will be well worth the cost and time.Connect the black wire to the turn signal ground, the red wire to the hot (blinker) corresponding signal side, and the white wire to the power of the key switch to complete the installation (tap the white wire into any running light wire that turns on when you switch on the ignition) For this configuration to work properly, you'll also need either a pair of resistors or a led relay flasher. However, take care when handling the resistors as they can get extremely warm. If feasible, put them on metal and place them far away from other wires or plastics.These are what I'm now utilizing on a Honda Ruckus or Metruck.
3.9/5
Solid Single Row LED: Produces a solid color line for a clean and new age look.
Direct Replacement. Compatible with 2008-2016 Ford Super Duty F-250, F-350, F-450, F-550.
1 year warranty and lifetime Tech Support.
Plug and Play Installation. No Additional Modifications needed.
Switchback function between white running light and amber turn signal light.
$234
This is my first time writing a review. I never leave reviews, but these mirror lights were a nice upgrade from some burnt-out smoked recons I had. Simple install took five minutes in total. I have the tools and am a mechanic. To remove the outdated ones, only a screwdriver was required. Before snapping them into place, make sure to check the polarity. I like how running white lights may be switched back to amber turn signals. They don't bother them and fit perfectly.
3.2/5
Fit for:Kenworth Peterbilt Freightliner Western Star Volvo International Mack Paccar and other Truck lights
High impact polycarbonate lens and housing and reflector are sonically sealed to prevent damage from moisture and corrosion
Wire Connection Tips: White Wire is the Ground; Black Wire is low brightness,Red Wire is highbrightness
48 LED Yellow (24 LED) on one sides and red (24 LED) on the other side
This double faced amber/red pedestal LED is commonly used for additional visibility in stop/turn/tail functions in heavy and medium duty trucks.
$234
The lights work wonderfully and were simple to attach on the fenders of my 1986 Peterbilt to replace the worn-out originals. They are extremely bright for the marker light and turn signal duties.
COPYRIGHT © 2019
