5/5
Rubber on each clamp secure gear in place, notched mount adds extra stability to each base
Durable, flexible grips with two clamps and soft rubber straps securely cushion and protect gear while providing a custom fit
Mounts on any horizontal or vertical surface - ATV racks, hard boxes, garage walls, truck beds, just about anywhere
Rotates 360degree. and tilts 0-180degree. in 45degree. increments
For secure, convenient transport of all vehicles and long guns or bows and other tools
$234
Excellent value; strong; mounted on my old Yamaha motorcycle; tightly retained my over-under; does the job for a reasonable price.
4.7/5
Low profile riser mounting base fits on standard Picatinny or Weaver rail.
Made of lightweight aircraft-grade aluminum, it weighs only 2.8 oz.
0.50" high saddle height with see-through design allows for use with the original iron sights.
3.35" long Picatinny rail 8 slots adds height to attach an optic, light or laser sight.
Two locking nuts and Stripe slip bolts for easy and quick installation.
$234
lightweight and well-made. To attach my custom rifle's optics, I bought this item. I can't connect the optics on a foldable rear iron sight that is only a few millimeters too high. Due to the broken track system between my barrel and receiver, moving the optics forward is not a possibility. This enhancer not only fixed my issue, but it also gave my weapon some unexpected features. The Picatinny system is holding my optics in place, and the hexagon socket head bolts are flush with the mount. Before, I was unable to disassemble them swiftly. Now I can switch between my AR15, my 8x optical lens, and my iron sight with ease. I've fired more than 100 rounds on the AR15 so far, but I haven't played. This riser is a precise size, so make sure you measure it twice and only place one order. You won't be let down. The ideal option is this. Avoid paying twice or three times for the same item in the store.
4.6/5
Makes it easy to mount Beamshot laser sights, tactical flashlights and other types of accessories on your firearms
The BEAMSHOT RF9 mount Creates a standard 1913 picatinny rail system on bull barrel long guns
Included in the RF9 kit are 4 different size spacers
Fits on all round barrel type firearms; Ideally suited for 12, 16, 20, 28 gauge shotguns and all kinds of rifles
$234
On my Mossberg 590, this mount fit wonderfully. I needed a flashlight mount, so I got a different, less expensive one from somewhere else. The magazine tubes and barrel are too near together for it to fit, hence it didn't function. This one fits simply and neatly because it is a clamshell. Although I haven't used it at the range yet, I don't think it will have any trouble holding a tactical light given its clamping power. To avoid abrading the magazine tube, I did use the thinnest rubber shims that I could cut to size.
4.5/5
Revolutionary offset design creates easy on/off switches for flashlights, lasers and red dot sights
Black anodized matte finish for superior anti-corrosion performance
Solid aluminum construction, durable and lightweight
Mounting versatility eliminates interference with vertical grips
Easy installation, perfect for amateurs and professionals
$234
These came swiftly in a tiny box with the necessary Allen key wrench and three offset mounts packaged in a Ziploc bag, and the craftsmanship is far higher than I had anticipated for the price. Oh, and it's not one again. For this inexpensive price, you receive offset mounts for three rifles because there are three offset mounts. I can rapidly switch my night-vision attachments between rifles with quick-release Weavers without fumbling with my (already-zeroed) scopes. I'm thrilled with my purchase and heartily endorse these.
4.1/5
✔ One of the dovetail mounts features a stop pin, for rock solid application. Adopt anti-oxidation and anti-corrosion coating treatment.
✔ The dovetail ring is for most scopes which are in 1''/ 25.4mm scope tube.
✔ With two rail clamp screws and four scope clamp screws, Precision and Repeatable Alignment.
✔ Medium profile, 15mm(0.6 in) from top of the rail to bottom of scope rings ( Item height: 1.6'').
✔ Double dovetail rings for 11mm dovetail mount specialized scope mount for .22/Airgun.
$234
These scope rings are ideal for attaching my 3x9x40 scope to the Marlin XT's dovetail groove. I like that there are two screws holding each ring to the dovetail in the four screw configuration since it is sturdy and reliable. In a small box with an Allen wrench, the rings were neatly wrapped. My stuff arrived extremely swiftly! I would repurchase these!
3.7/5
SPECS - Overall Length: 12 3/4". Standard 1†one-piece main tube. Fits onto 3/8" & 11mm dovetail rail or groove on top of the receiver.
MOUNT INCLUDED - One piece airgun mount with 4 clamping screws plus built-in removable stop pin helps reinforce to stand the unique shocking from a piston-type high-power air rifle.
FULL-SIZE SCOPE - Premium quality full size scope for better view of target with wire reticle.
FULLY ADJUSTABLE - Variable 3x-9x power and 32mm parallex adjustable objective. Fingertight windage/elevation adjustments.
SECURE - One piece airgun mount with 4 clamping screws plus built-in removable stop pin helps to scope to stay in place against powerful shocking during shooting.
$234
Added to a Ruger Blackhawk.177 was this scope. Because of the stock scope's inconsistent grouping at 25 yards, I replaced it. Or get a group, I would fire five shots, and there would be four to five of them "spacing..... I don't shoot frequently, but I also don't shoot when wearing a blindfold. So I bought this scope, put it on, and zeroed it in on a few pellets. I'll put 1 now "at 50 yards, form groupings. So far, the scope is really accurate, and the adjusting dials actually function as intended. This is a wonderful cheap scope for a high power air rifle (not like the OEM scope). I was annoyed by the factory scope, but now I really enjoy shooting. Recommended for those looking for a good scope on small
3.7/5
Included hex wrench,screws, nuts.
The ring mount is solid and lightweight perfect for mlok rail systems.
Affordable offset light mount, perfect mlok attachment point.
This mlok mount is aluminum construction and precise machining.
1 inch diameter for any tube accessories such as flashlight.
$234
You need Adobe Flash Player to view this video.Download Flash Player.I completed the install in approximately two minutes. Actually, I spent more time gathering the #15 Torks driver than mounting it on my weapon.
3.5/5
Perfect for canted BUIS. You'll be all setup for the distant shot as well as the close quarters shot when puting if get your pop up sights on it and optic sight with magnification on the upper rail
This is one perfect choice for keltec sub2000, your weapon is able to fold all the way when you put on this mount and install some sight models such as UTG red dot on it
Can be installed in one of eight different clock positions. Holds well, and placed at both a good angle and drop point
Very light, great low profile, fits any 20mm standard picatinny weaver rail. Precision CNC machined from aluminum.
Snag-free profile along with optimal placement of your accessory such as a laser, lights and sights. It snugs your accessory up tight against the weapon at 11 or 1 o'clock position
$234
Because it has a 35-degree rail, which is ideal for the Center Axis Relock shooting system seen in the John Wick movies, the seller supplied a nice product, but they should enhance the description and call it the JOHN WICK mount. Although the CAR system has some instructional films, they are not widely used. With the CAR system, this rail makes lasers and sights ideal for close-quarters combat.
COPYRIGHT © 2019