When it comes to skiing, many people believe that stiff skis are harder to turn. While it is true that they may be more difficult to turn at first, once you get the hang of it, they can actually be easier to turn. The reason for this is because stiff skis have less flex, which means that they will not absorb as much of the impact from the snow, making it easier for you to turn them.
Can skis be too sharp? The simple answer is yes, skis can be too sharp. However, it is important to understand that the term "sharp" is relative. For example, a freshly sharpened pair of skis will feel very different than a pair of skis that have been dulled by use. In general, skis should be sharpened regularly in order to maintain optimal performance. That said, there are a few situations where having excessively sharp skis can be detrimental. Firstly, sharp skis can increase the risk of injury, as they
It's possible to tune skis at home, but it takes some time and effort to do it right. If you're not familiar with the process, it's best to take them to a professional shop. However, if you're determined to do it yourself, here are a few things to keep in mind. First, you'll need to get your hands on some good quality tuning tools. Second, make sure you have a clean, flat work surface to work on. Third, take your time and be patient - rushing the process will only result in a sub-par tune
Most people don't tune their skis every year, but it depends on how often you ski and how well you take care of your skis. If you ski a lot, or if you ski in harsh conditions, you may need to tune your skis more often.
4.7/5
The best wax scraper made
Use to scrape all skis and snowboards
Wide wax scraper
Solid and durable
$234
I'm not giving it a 5, because I believe the design might use some work. To make cleaning the edge simpler and more precise, I would have preferred a little cut. To preserve a decent scrap, I also had to do some sharpening. Overall, a useful tool for beginners. Its straightforward, uncomplicated design enables you to view the features you would find crucial in a scraper. The notch was one thing, and the shape was another, in my opinion. This one bends quite a little when held long side down, and because there isn't much room, you have to use both hands and keep your fingers together. Still, I'm glad I got it.
4.6/5
New, improved set for 2016. All the brushes (3 in x 4.5 in) you need to get started. This money saving three brush kit contains:
Handy zippered storage case included.
A brass brush (10 mm) for renewing base structure, opening pores before you wax (for this step brush in the opposite direction - tail to tip), and brushing hard waxes.
A nylon brush (10 mm) that is the workhorse of wax removal. Designed to be stiff enough to remove wax in less passes to save you time.
A soft, fine horsehair brush (8 mm) for removing wax from the fine structure of your base for the ultimate polish!
$234
superior product I simply waxed my board the way my friend usually does. These brushes, in my opinion, are well worth the money and work pretty well. The wax job on your board or skis will be of higher quality if brushes are used. I also improved the way the wax was applied to my skis. Absolutely watch a video on how to brush before you begin. Consider it as water flowing underneath you while you're bored. Allow snow or set water to run under your bore more smoothly and without resistance by using a brush. Use a wax stripper, I prefer a citrus-based one. Save some cash; it will be beneficial. Investing in the right equipment is necessary, but if you enjoy skiing and snowboarding, it will be worthwhile. It's convenient to be able to wax your board according to temperature for optimum riding performance. When you're bored and moving slowly on warm days due of a cold temperature wax, it stinks. to be able to quickly and smoothly apply wax that is warmer in temperature.
4.6/5
Metal base scraper. Use this for P-Tex work on ski and snowboard bases. Suitable for light base planing. Vinyl storage sleeve for metal scraper included.
Complete kit to repair ski and snowboard bases: P-Tex; Metal Scraper; Three Buffing Pads. Choose black p-tex for black base areas and clear p-tex for clear or colorized base areas. Instructions included.
10 black p-tex rods
10 P-Tex Rods for base repairs. 8 mm diameter. About 190 mm long (7.5 inches) long.
3 Base Buffing/Treatment Fibertex/Scotchbrite Pads (4.5 in x 6 in) for prepping wax before overlay and buffing base after structuring: 1 Medium (Maroon), 1 Fine (Gray), 1 Non-abrasive (White) large non-woven nylon impregnated with ultra-fine abrasive.
$234
First off, a special thank you to Dr. D at RaceWax for his usual top-notch service. RaceWax did a fantastic job formulating their P-Tex, and it "camoflagues" with the current base well. It was challenging for me to locate the initial gouge after waxing and brushing when the area was adequately scraped with the metal scraper and assortment of pads that were provided. a few pointers for success Unless you are a racer, don't worry about little scratches; only the deeper ones require repair. Before beginning to scrape, wait for the P-Tex to completely cool. When scraping, start in the middle and work your way outwards. Scrape well enough so that the drops are no longer visible. Use the pads provided to blend into the existing grain pattern. Make sure the area to be repaired is clean and dry. You haven't scraped enough if you can still see the P-Tex drips surrounding the gouge. Finally, if you employ the right waxing technique (hot iron with a thorough base prep and top layer wax), this should almost completely disappear after brushing. Don't panic if you still notice a tiny bit of your repair before waxing.
4.6/5
Large Cordura tool bag: Internal strap to secure wax iron; two internal open-access tool pockets and zippered mesh pocket; external quick access pocket; two carry straps with a velcro clasp handle. Roomy enough to add more items!
RaceWax Complete Ski Snowboard Wax Tuning Kit. Perfect kit for families or those needing to tune many skis/boards! The edge tool is the last tool you will ever need - it does every angle for both base and side - 20 different angles! You can even use this edge tool to determine the angles if you don't know them! The kit includes a 70 mm diamond stone for fine honing of the edge without metal removal.
Temperature adjustable 1000W RaceWax wax iron with a double-thick baseplate dimpled and grooved for excellent wax distribution. Temperature range of 80-170 C (176-338 F). 120 volts and 1000 watts, 60 Hz. North American model with standard plug. Two Large Brake Retainers
Two 60 g bars Swix Wax - 1 Red/Warm mid-range temp - 1 Blue/Cold temp; Two Wax Scrapers (1 ski, 1 board) with a corner notch for edge cleaning. Complete 3-Brush Kit: Brass brush for renewing base structure and brushing hard waxes; Nylon brush, the workhorse of wax removal; Soft, fine Horsehair brush for polishing your base! Handy zippered storage case included. Each brush measures 3 in x 4.5 in.;
Base-Side Bevel File Guide SKS Multi Tool. Set a precise angle from 0 to 5 deg in 0.5 increments.; Two-sided metal cutting file included; Brass file brush; Gumi Stone, for removing rust, prepping/deburring/detuning edges; Blue Diamond Stone for routine edge maintenance and sharpening (360 grit); Metal Scraper with vinyl storage sleeve; 1 Clear and 1 Black P-Tex
$234
fantastic beginning set Prior to choosing a kit, I was debating purchasing individual parts. I finally came to the conclusion that it would be a better investment, and I have not been let down. Since purchasing this kit, I've probably performed 4 tunes and/or waxes. Before receiving the kit, I had no prior expertise with any of the components, but I consider myself to be somewhat DIY savvy. It takes a little getting used to utilizing the various tools here, but it hasn't been too difficult, and you can always fix mistakes when you make them (provided you don't accidentally set your board on fire with p-tex or anything). The main thing you will be missing is a board cleaner. On to a handful of the kit's components.I believe the bag is rather good. perfectly fits and neatly holds everything. It is simple to remove items, use them, and then replace them. Quality is also high.For me, the steepest learning curve has been with P-tex candles. Not because they were poor, but since I used them all, I changed the ones that came with the package. The replacements might not be much better than what the bag came with, in my opinion. The main lesson I took away from using them was to keep them low over the board and the metal scraping plate. Because of this, they don't burn too hot. If you can, try to limit the dripping so that there is less scraping.Plastic is scraped using the metal scraper. It captures plastic that is dripping. It's functioning well so far.The gummi stone does a great job of cleaning the edges. seems to be a rust eraser.It is simple to change the file guide's angle. Insert the directional file, tighten it up, fix the angle, and the task is completed with long, smooth pulls.I'm still attempting to reduce the amount of wax used. No, I didn't check the temperature to see how well it holds; the iron can be adjusted.But the wax appears to melt quite well. I try to keep in there at the lowest temperature that causes the wax to leak. The iron moves easily and appears to be well-made. I haven't found a better wax yet that works in the snow. Don't anticipate getting 15 waxes out of that first bar if you're anything like me. I managed to get 4 waxes from it, but I also have a sizable snowboard. Moreover, use far too much wax. Consequently, I've had a lot of practice with...Large scraper used to scrape wax. The little one hasn't been used yet. I'm content to use it because it is practical and does not flex even though it is nothing spectacular.Each brush seemed to be doing its job well. giving the wax or board base texture. Just locate some guidelines so you may choose the appropriate brush for the task. All of them have good bristles on the bottom and are made of nice, strong wood. The bristles haven't started to come out yet, and the quality appears good for them.I haven't really utilized the remaining items, but they appear to be of comparable quality. I'm relieved to be utilizing a good kit with everything close at hand. And from what I can tell, my board is also feeling the love.
4.6/5
PACKAGING* Comes neatly displayed in damage free packaging and includes a cinch tight Demon bag for travel and storage.
QUALITY* The accuracy of the degree angles has been laser measured and tested. The Demon edge tool also has a unique built in file to clean off any steel scraps from the files after tuning. Built to be light weight and very durable and backed by Demon's Quality Warranty.
SIDE EDGE MULTI-TOOL* Included in this kit is Demon's adjustable side edge tool that can accept any file (steel or diamond) between 5 and 7 mm thick and up to 72 mm in length. The tool can adjust the side edge to angles of 85, 86, 87, 88, 89, 90 degrees.
FILES INCLUDED* Files will help you in your edge work for ski and snowboard tuning as you sharpen, debur and polish and tune the edges of your ski and snowboard. The Demon Diamond stones included come in 3 grits, 240 (Black-Rough Cut), 500 (Red- Medium) and 1000 (Blue- Ultra-Fine). Also included is a steel file and gummy stone for edge work during prep and during the final tuning process. Edge work is an essential part of the overal tuning process and this tool delivers.
Demon United Elite X Ski and Snowboard Edge Tuner- Includes Side Edge Multi-Tool, 3 Diamond Stones, Steel File and Gummy Stone- Ski Edge Tuner and Ski Edge Tool Combo Kit
$234
Everything is priced reasonably (but not a screaming deal) for a mid-level personal usage kit to maintain your ski edges, thus I've rated it four stars overall. The edging tool is worth $20, in my opinion. The three diamond stones are worth $20, and the remaining $10 is made up of a gummy and a file. Fair, but not a particularly good bundle.The edging instrument: Yes, that lime and black thing. The decision is whether one of the $10 edge holders will suffice for you or whether you prefer something with a few more functions. No, it's not as lovely as the $50 Toko one with the wheels that move around your base, but it does have some pleasant features that elevate it above the cheap ones that come with most tuning kits. The majority of the bundled tuning kits came with subpar edgers, else I would have purchased one of them.1. You can simply loosen and tighten the file and stones into place thanks to the lock knob. This one fixes the issue with most of the cheap ones where you have to fight to get the file into them or they loosen up over time and don't hold the file well. For some reason, you turn the knob right to loosen and left to tighten, I should point out. Although it is reversed from the norm, Demon might claim that it is marked (with a and -). hardly an issue, and it does keep the file or stones firmly in place.2. It comes with a sweet small brush to clean the file. The ability to keep filings out of your lovely brass base brush, which you use to prepare your bases for wax, is, I suppose, a useful function.3. There are five possible angles: 85, 86, 87, 88, and 90. With the inexpensive angle guides, you either receive a predetermined angle or must select a certain side or direction, both of which are rather simple to get wrong. This has a knurled knob that you may use to slightly slide the lime green plate in and out. They assert that it is calibrated, and I have no means of disputing that. The sole drawback is that the set angle is shown by a color-on-color embossed number visible through a tiny hole. quite difficult to see without adequate illumination (see photo). They could have easily increased that size.4. Con: It lacks the wonderful small roller wheels that the pricey Toko one has, so take care not to scratch your base with metal shavings.The stones of diamond(3) Stones. Pretty normal, inexpensive bunch of stones, I'd say $20 value. The colored backs look to be ceramic rather than plastic, which makes them nice and sturdy. They are suitably color coded, have the necessary holes in the metal face to capture the shavings, and they are appropriately colored. Some less expensive ones will have bendable plastic backing.the data.a file, that is. both sides use the same pitch. a second cut (cross hatch pattern). matches the space perfectly. I can't tell you how well it sharpens edges because my edges aren't currently damaged, but I'll bet it does a great job.Sticky Stone You definitely need one of these. It is a beautiful gummy stone.includes a cheap bag to store everything in. That is not very valuable. In fact, I was able to fit everything inside my waxing/brush kit case. This one is quite lovely: https://www.amazon.com/gp/product/B01N1I0YKR
4.5/5
Iron Spec: Temperature adjustable Demon Wax Iron with dual voltage option and a LIFETIME WARRANTY covered by Demon! Easy numbered temperature dial adjusts from 65 C / 149 F and rises to 230 C / 445F.
Bag Spec: Internal strap to secure wax iron, three internal open-access tool pockets, zippered mesh pocket, elastic pocket, and zipped mesh pouch. Heavy duty carry strap and easy wipe off material make is easy to keep your kit clean!
Demon Hyper Speed Ski & Snowboard Tune Kit with Iron, 1lb Wax Block & Base Cleaner
Tools included: Edge Tuner for 88 / 90 degree side edge angles (includes shavings brush), a metal scrapper and edge file for ultimate tuning options and for P-tex repairs, a Brass file brush, a 10 mm Brass Brush that is used for renewing base structure and opening pores during prep before you wax, a 10 mm Nylon Brush that is stiff and perfect for removing the bulk of wax during the tuning process, a fine horsehair 8 mm brush for removing wax from your skis or snowboard base structure.
Wax Spec- 1.06 Lbs (good for 30-40 waxings) High Quality Demon Hyper X Wax Big Block- Universal Blend for Any Temp wax. This kit also includes our Citrus Base Cleaner to clean your ski and snowboards bases during prep. Our waxes are blended, scented and made with our proprietary blends in Southern California. Also includes 1 Clear P-Tex, 1 Black P-Tex, Two Ski Brake Retainers, Tuning stone, Wax scrapper with edge notch, Polish pad and Tune instruction guide.
$234
Everything indicated in the list was included in my kit, plus a gummi stone for corners that wasn't even included in the description but was a very welcome extra. The quality of the brushes, files, and edge tools is good to excellent. My brass brush's bristles are slightly out of alignment, but it doesn't matter because it's simply used to remove old wax, so accuracy isn't necessary. The horsehair and nylon brushes provided a good finish and didn't have that issue. As a result of its relative weakness and my expectation that most citrus cleaning sold in stores is superior, I just used half of the tiny bottle of base cleaner to remove all the old wax at once. The iron heated up quickly and worked satisfactorily; on tips and tails, a little convex curved shape might be more useful. The wax itself is perhaps the kit's weakest link. This big block of wax will last for a very long time if you know how to use it sparingly and avoid using excessive amounts. It would be fantastic if you have a sintered base and enjoy using cheap wax for many cleaning cycles, but the formula is dubious soft. It should set up harder than that since even after spending the night at room temperature before finishing, it still picks up fingerprints and scuffs from the smallest touch. I may sell it and purchase a better kind of wax, but first I'll see how it does up the hill.
4.3/5
Quickly sharpens side edge of skis and snowboards
Fits in pocket
3.75 inches x 2.25 inches
88 degree or 90 degree bevel
$234
I bought some used XC metal edge skis that were in excellent shape but had rust all over the edges. I tried sanding and even using a file to remove the rust, and while the file did work, I didn't want to blunt the edges, so I began looking for edge tools.My edges are now rust-free and razor-sharp thanks to this equipment, and I also learned to dry my skis off as soon as possible to stop rust from developing again.the ease of usea file with an arrow pointing in the direction of sharpening or tuningThe plastic holder for the file allows for sliding up and down (if you needed to adjust how far the file sticks out, useful for the base edge)90 degrees or an 88-degree angleA two-sided file has a bumpy, rough side for eliminating rust or other flaws, and a smooth side that serves as the file's sharpening surface.Price is excellentNeutralI know they have a video posted that was helpful, but it was too dark to clearly see the angles they used. At first, it is kind of confusing with the angle; it is clearly marked but it doesn't say if the marked side should be facing down or up (I asked a few friends and they all came up with different answers, so I'm not the only one?) (what was facing up or down...etc).ConsNo guidelines.
4.3/5
The Iron has an easy turn dial temp gauge and a Lifetime Warranty.
The Iron is High quality and Custom built for efficiency- This Wax Iron is perfect for Skis and Snowboards.
Bonus**Includes 133 grams of Demon Wax designed for Universal snow temperatures
Everything you need for a Complete Snowboard/Ski Tune at home or on the go- Includes INSTRUCTIONS
Comes with a Flat file, Edge tuner, Wax scraper, Tuning stone, 3 Wire brushes, Adjustable temp Iron, Polish pad, P-tex, and a Carry case.
$234
This is a fantastic package to accomplish pretty much anything you would want to do at home, although I can say that with some caveat because I spent several seasons tuning and waxing skis and snowboards in a shop. I was pleasantly impressed by the high quality of everything in the package, even though you might also receive some base cleaner and, if you're skiing in the spring or a really cold climate, some temperature-specific wax to go with it. Maybe you would purchase a nicer edge tuner or just hire someone to do it for you if you wanted a precise bevel on your edge. The labeling on the temperature knob seemed higher than what it was actually producing, but since the iron could reach temperatures far higher than necessary, that wasn't really a problem.
3.8/5
The Demon Basic Complete Tune Kit Includes: Edge tuner Tuning stone Lighting Universal Wax Wax scraper Flat file Wire brush Mini wax iron Polish pad Ptex Metal scraper Includes instructions Carry case
The Iron is High quality and Custom built for efficiency. This Wax Iron is perfect for Skis and Snowboards. The Iron has an easy turn dial temp gauge, can be switched from 110 or 220 and a lifetime warranty.
Demon's Basic Complete Tune Kit that will get you everything needed for a Basic tune up on your ski and snowboard. Perfect for that ski vacation or right in your own garage.
$234
The package was a fantastic value for the money. We live in Washington, where a wax and blade sharpening run $40. So I'll save money if I do this twice. With this package, it was simple and only took me 30 to 45 minutes to wax and sharpen my blades. (I definitely used too much wax and had to remove a lot of it, but I wanted it to be extremely smooth.) This kit includes enough wax to perform approximately 4 ski waxings. (I made one pair of skis using roughly a quarter of the materials in the bag.) The iron is only around 5 inches tall, but that is ideal because it is small and can be stored in the convenient tool case. I had a friend hold the cord while I waxed because it was too lengthy to throw over my shoulder like a power tool cord and too curly to avoid dipping into the hot wax. The cord is quite bulky and curly because it arrived in a tight bundle. It was considerably easier when I got a friend to hold the cable while I waxed. (I know I seem so inexperienced, but this was my first try and a friend helped.)Cons: The sharpening tool is quite inexpensive. The file continues falling out because there is no way to keep it in place. The file is shaky and has a thin, flimsy feel. I jammed 4 pennies into the slot next to the file because there is nothing to hold it in place, and they held the file-stone in place without any issues. (I then sharpened using the side of the blade that was opposite from where I had put the pennies.) Although not of excellent quality, it is adequate for a quick check. You can't sharpen close to the ski stoppers because the file's handle, which is too large, collides with the stopper and becomes tangled. (I'm not sure why the handle on the file is so large. Since most skis have a stopper, the design is peculiar. Given that I only give the sharpener 1 star, perhaps my next purchase will be a better sharpening instrument. Pennies can be found below.2) Because the iron is so small, the dial could only be placed under the handle, making it impossible to read. Fortunately, I correctly predicted the "med" temperature on the first try. As a result, I will simply leave the temperature there whenever possible. But even if I can't alter the temperature, the iron performed wonderfully, so it's not a huge deal.With the exception of those two problems, I believe the kit is excellent for weekend skiers who only need to wax or sharpen skis occasionally.Note for the Novice (me): I covered the floor with a ton of newspaper, but soon I started scraping the skis wax flew everywhere. The shavings then clung to the floor where I didn't have any newspaper when I unintentionally trod on them. So I had to scrape my floor afterwards. Do this outside or in a garage, please. I might spend a week scrubbing wax off of my kitchen floor.
Most skis can be tuned multiple times, but eventually the ski will need to be replaced.
There's no definitive answer to this question since it depends on a number of factors, including the type of snowboard, the quality of the snowboard, and the rider's preference. However, generally speaking, most snowboards can be tuned an average of 10-15 times before they need to be replaced.
The average snowboard will last anywhere from 3-7 years. The lifespan of a snowboard depends on many factors, such as how often it is used, the conditions it is used in, how well it is taken care of, and whether or not it is regularly serviced. A board that is used frequently in harsh conditions will have a shorter lifespan than a board that is used less often in milder conditions. Taking good care of your board and having it serviced regularly will help extend its lifespan.
Ski wax and tune cost can vary depending on the equipment and services that you need. Generally, a ski wax and tune will cost between $30 and $100. The cost of the equipment will usually be about $10 to $20 for a good quality wax and tune kit. The cost of the services will usually be about $20 to $80 for a professional ski wax and tune.
Tuning a snowboard can range in price from $20 to $60, depending on the type of tuning required and the equipment used. For a simple edge sharpening and waxing, expect to pay around $20. For a more comprehensive tune-up, which may include base repairs, edge repairs, and hot waxing, expect to pay around $60.
A full ski tune generally costs between $40 and $60. This price includes a full wax job, edge sharpening and polishing, and base repair (if necessary).
COPYRIGHT © 2019