A scan tool can reset the tire pressure monitoring system (TPMS) on a vehicle. The TPMS is a system that monitors the air pressure in a vehicle's tires and sends a warning signal to the driver when the pressure is low. A scan tool can be used to diagnose and repair the TPMS.
OBD2 scanners can read TPMS (tire pressure monitoring system) data from the vehicle's computer. This data can be used to determine if the tires are inflated properly and to adjust the pressure if needed.
You can program TPMS yourself with the right tools and a little know-how. First, you'll need to purchase a TPMS relearn tool. This tool can be found at most auto parts stores. Once you have the tool, follow the instructions that come with it to relearn the new sensor IDs to the vehicle's ECU.
When you get new tires, you don't necessarily have to replace your TPMS (tire pressure monitoring system) sensors. However, if your TPMS sensors are more than five years old, it's a good idea to replace them. TPMS sensors have a battery life of about five years, so they may not be accurate after that. Also, if your TPMS sensors are damaged, you'll need to replace them.
4.5/5
Program mx-sensors to replace OE sensors
Activate all known sensors
Streamlines user interface, quick start and advance mode
Compatible with domestic, Asian and European vehicles, equipped with TPMS
$234
After becoming dissatisfied with TPMS issues and local businesses' inability to configure TPMS sensors for various makes and models, I purchased this gadget. I didn't want to take any of my vehicles to the dealer every time there was a TPMS problem, and after speaking with some tire shop employees, I was persuaded that some of the technicians had the necessary technical knowledge to configure the sensors for different makes and models. I recently needed to have a TPMS sensor updated, and the shop easily took care of the replacement for only $16. They claimed that after a few miles of driving, the TPMS light would turn off. I was aware from prior experience that after the sensor is activated, my 2009 Forester needs the new ID number of the sensor to be programmed into the TPMS system in the vehicle. Naturally, the TPMS light did not go off as I drove home. I took out this tool, and in just a few minutes, the TPMS warning light went out and the new sensor ID number was encoded into the vehicle's TPMS system. This utility will activate new sensors, scan all the sensors to determine whether they are active, diagnose the TPMS system, program the new sensor ID numbers into your car's TPMS system, and possibly have a ton of other capabilities that I won't likely need. Although it was pricey, I believe having a TPMS on hand is a smart idea now that it is required for all cars.
4.4/5
GM Tire Pressure Relearn Tool Works on 2006-2019 GM vehicles(Chevy / Buick / GMC / Opel /Cadillac etc. ), Please check the last picture with exact car model. More car models will be updated after being tested!
High Quality EL-50448 Tire Pressure Relearn Tool comes with Circuit Optimal Design, which makes the operation more fast and reliable. Compatible with high quality environmental plastic material. Better than other one. small but powerful.
Easy to Use Takes 1 minutes only to Relearn TPMS after Did the tire Rotation or new tire exchanged, activates the individual TPM sensor with the press of one button (by tire order of front-left, front-right, right-back, left-back). [Please hold the tool against the sidewall of the tire, near the valve stem to read sensor information, It couldn’t read if on an inappropriate position. ]
Powerful Activation Tool Tire Pressure monitor sensors (TPMS) on most general Motors equipped with 315/433 MHz can be reset by using special tool EL-50448. Simple inexpensive but works great.
Professional Support Ce and FCC approved. ediag provides 12 months for el-50448 tpms. Note: It need a 9 V battery (not included) .
$234
Excellent performance on my 2014 GMC Sierra 1500 pickup truck. At first, I was unable to get it to operate, but after glancing at the provided photographs in the paper, everything started to work. Things won't proceed well until you strictly adhere to Step 6 below; at least, that was the case in my case.1) Insert an EL-50448 with a 9-volt battery (not provided).2) Insert the key into the ignition, but do not start the truck.3) Switch the truck to the Tire Pressure Sensor Reset Mode (Owners Manual shows you how).4) The DIC indicates that the horn is in the Mode to Reset Sensors after two toots.5) Start with the front tire on the driver's side.Will not function unless the following is done. The short spherical antennae on top of EL-50448 should be firmly pressed against the tire sidewall close to the Pressure Sensor Air Valve while holding the device at a 90-degree angle to the tire sidewall (straight out). Hold down the EL-50448's button until the truck horn toots once before the LED flashes.7) Switch to the driver's front tire and carry out Step 6 again.8) Switch to the back tire on the passenger side and repeat Step 6.9) Switch to the rear tire on the driver's side and carry out Step 6 again.
4.4/5
FUNCTIONS: 1.Protecting the valve core from corrosion due to direct contact with clay, water and snow. 2. preventing the flat tire and ensure stable tire pressure. 3. Ensure safe driving.
MATERIAL: The valve cap is made of fine copper, which is corrosion resistant, durable.
Applications: Universal size fits for all Car, motorcycle, bicycle
After-sales service: DSYCAR provides Lifetime service after sale. If you have any problem during one year, please can contact us.
TECHNOLOGY: Die cast the copper molding at one time. Plate the surface to avoid metal oxidization, rusting and to improve corrosion resistance, wear resistance, texture and glossiness.
$234
really cool These are in my Jeep, and a few folks have commented on how funny they are.
4.3/5
Crystal clear lcd color display which simultaneously displays both pressure and temperature readin
Highly efficient monocrystalline solar panel with lithium iron phosphate (lifepo 4) backup battery
Windshield, mountable monitor, micro, usb charging cable, and replaceable cr1632 batteries
Monitors 4 tires from 0 to 70 psi, designed for trailers 25ft or less
Features next generation tireminder transmitters, weighing only 0
$234
Making friends with this machine and learning how to program it took me a few months. I installed it on my trailer after waiting a month, just to become dissatisfied with it and want to return it. I now regret not doing so. Since you may only return anything within 30 days of purchase, I advise you to do it right away. I was frustrated since I had initially improperly programmed the device. Although I found the diections to be a little perplexing, the Minder staff was trying to make me satisfied with it. They walked me through the code throughout the course of several talks we had. This organization, which has a customer care division that is very committed, is based in Stuart, Florida. They will call you back if you leave a message on the answering machine. MINDER MAKES THIS UNIT IN THE USA.
4.2/5
Tire reset tool works on most GM/Ford/Buick/Cadillac/Chevrolet/GMC/Lincoln/Mercury equipped with TPMS sensor.
Sensitive sensor, Circuit optimal design, Easy to use, Activates the individual TPMS sensor with the press of one button.2019 New Design updated chip and antenna that runs faster and responds more quickly than before.
Real-time Customer Service, please feel free to contact with Seller if with any questions(One year warranty).
2019 Updated Generation Super EL50448 TPMS relearn tool is an essential tool of replacement tire pressure sensor, tire pressure alarm remove or exchange tires.
Simple and inexpensive but works great. Much better than going to the dealer or a tire store just to get your pressure sensors reset.
$234
I've used this tool on BOTH a 2015 Chevrolet Traverse and a 2013 Ford Explorer. It performed FANTASTIC on BOTH. However, make sure to adhere to the recommendations and possibly go a little beyond them when it comes to removing interference, such as noise from other surrounding vehicles. I ran into problems the first time I tried to utilize it on the 2013 Ford Explorer. The tool would enable the vehicle to recognize some tire sensors, but NOT ALL of them (and not always the same sensor(s)); once the right front, then the rear right, and then the left rear in no particular order; sometimes pressing its button again would yield a result, and sometimes it would not; however, the front left [driver's side front] always worked] and I probably tried 8 or 9 times before I was able to get all four tire sensors to be recognized in one relearn session). After several failed tries, I grew pretty FRUSTRATED and started blaming this "cheap gadget." However, after doing some online research, I discovered that even professional mechanics using PRO tools occasionally experienced issues with various interference sources, such as mobile phones, Bluetooth devices, and various devices plugged into the power port or cigarette lighter (a PRO mechanic even reported that a specific, inexpensive, no-name brand mobile phone charger plugged into the power port/cigarette lighter was the cause of TPMS issues). So, I unplugged my radar detector from the cigarette lighter/power port and turned on my Bluetooth-enabled phone about 50 to 60 feet away from my car. Suddenly, this tool began to work flawlessly on every tire sensor with just one button press, without any other adjustments to the vehicle's location or the programming procedures that I was using. It was most likely one of the two because it worked PERFECTLY the first time after excluding the phone and radar detector from the equation. I haven't gone back to revisit this to determine if the phone or the radar detector was the source of interference. If I were a professional mechanic changing tires all day, every day, this tool might not be durable enough to be the ideal one, but for do-it-yourselfers at this price, it's EXCELLENT.
4.2/5
ã€NOTES ABOUT USE 】1-Different vehicle may need different times to reset all of your tire sensors after rotation. 2-The tire pressure monitor sensor use NEW 9V battery, package does not include the charger and battery. 3-Please take out battery if don't use.
ã€CHECK CAR MODEL】Please check your car model if it can work with EL50448 in the last pictures .ã€The tire pressure monitor sensor can't use for Truck.】 TPMS tire pressure sensor on models in & after 2012 can be read only with some specified diagnostic tools.
ã€ABOUT LEARN MODE】Ensure that the vehicle is in the TPMS Learn Mode, and follow the service procedure. Hold tool against the sidewall of the tire, near the valve stem. Depress Learn button while holding the tool against the tire sidewall.
ã€SIMPLE USE STEP】 EL50448 tpms reset tool reprogram all tires much easier just with 3 steps: Step 1 - Enter leaning mode; Step 2 - Read tire pressure sensor information; Step 3 - Same method to read other tire pressure information;
ã€EASY ACTIVATION】Tire pressure monitor sensor activation tool is simple, fast and easy to use, activates the individual TPM sensor with the press of one button.
$234
I bought some old OEM Chevy wheels from a 2015 Silverado about three years ago to put on my 2012 model. I took a chance even though the vendor wasn't sure if the vehicle had TPMS sensors fitted. I just figured there weren't any of them or that they weren't compatible due of the different model year when I couldn't get them to sync with my truck. I've been driving with the yellow tire warning light on for the past three years. I required new tires last week, and I noticed TPMS sensors in the wheels as they were being changed. I looked around to see if there was a way to get them to operate and came across this cute little gadget. Can't beat the price, and I was astonished that holding it close to the valve stem on the wheel was all it took to turn the sensors back on. Now that I have a gadget to help me re-learn the truck the next time I get a tire rotation, I can get pressure readings for all 4 of my tires.
4.1/5
Real-time Customer Service, please feel free to contact with Seller if with any questions(One year warranty).
Vehicle Specific Fit
2019 Updated Version EL50448 is an essential tool of replacement tire pressure sensor, tire pressure alarm remove or exchange tires.
Works on most General Motors (Chevy/Buick/GMC/Opel/Cadillac) equipped with Tire Pressure Monitor system (TPMS) sensor.
Sensitive sensor, Circuit Optimal Design, Easy to use, Activates the individual TPMS sensor with the press of one button.
Simple and inexpensive but works great. Much better than going to the dealer or a tire store just to get your pressure sensors reset.
$234
On my 2014 Traverse, I've tried this once, and I was able to make it function. The only problem I had was that the valve stem on the first tire (front left), with which you begin the relearn procedure, was initially in the six o'clock position. After futzing around with it for a while and failing to get it to function, I decided to try if moving the valve stem would make a difference. The valve steam operated well once I shifted the automobile towards the 12 o'clock position. It's important to note that once the first tire was identified, several of the other tires had their valve stems at the four and six o'clock positions and still functioned as intended. I'm not sure if my initial experience will hold true in further uses of this, but I thought I'd share it in case someone else runs into the same issue on their first usage.
4.1/5
High-precision air valve to prevent air leakage, featuring a convenient design that allows for quick installation and removal of the sensor,it is truly the ultimate TPMS solution as the originals
100% ID clone-able sensor with no re-learn required, Independently tested and certified to meet SAE industry standard J1205 / J1206 testing
Covers over 98% of all OE sensors on the market will greatly simplify your inventory management and lower investment and sales loss
Robust clamp-in pivoting stem design allows for 0-35 degree angle adjustment to fit all types of wheels
Programming MX-Sensor (315 MHz + 433 MHz), performs like OE sensors,in terms of signal interval,durability,and functionality supporting up to 99% of the US and Canadian vehicles
$234
These sensors are excellent. The majority of cars can use them. I've read some unfavorable reviews and would like to clarify them.For these to function and be recognized by your car, two things must take place (which will turn off TPMS sensor light warning).First, realize that TPMS sensors communicate their ID number and the tire pressure at the moment. Unless it knows to seek for them, your car will ignore them. Imagine that your car has a spreadsheet that lists the following information for each of its four or five tire slots: TIRE1: 123456, TIRE2: ABCDEF, TIRE3: 140GNB, and TIRE4: 20RMS0. Your automobile will flash a warning light if the TPMP sensors are not set to read 123456, ABCDEF, 140GNB, or 20RMS0. Additionally, if the TPMS is malfunctioning or the tire pressure is too low, a warning light will flash. Just remember that the codes are made up of random letters and numbers and are kept in your automobile; they don't have to be the ones I listed. If your sensors already have ID numbers, you can modify that "spreadsheet" in your automobile, but you'll need a tool to do it.To install, first PROGRAM the sensor after installing it in the wheel. Using an Autel or Bartec TPMS programmer, you can assign an ID to the sensor by programming it. They are delivered BLANK, thus they CANNOT be used without programming. Set a code for them. TIP: If you can identify the codes of all of your tires and TPMS sensors, whether they are new or used, or at least the ones the car recognizes, you can configure the new sensors to match the old ones, and everything will magically function. Step 2 won't even be necessary to turn off the TPMS warning light.2. Set up your vehicle to understand the new TPMS sensor IDs. Making these sensors match your previous sensor IDs, which your car already understands, is the easiest thing to do if you purchase them. However, no matter what you do, if you generate new sensor IDs, you must inform your car of their existence. Advanced Autel or Bartec TPMS devices can be used for this. The same is true for your dealership. ONE MORE STEP REQUIRED: Press your car's TPMS reset button. Usually, it's a tiny black button that's near your legs at the bottom of the plastic beside the steering wheel, which is much lower. Contrary to popular misconception, this does not involve reprogramming the vehicle to recognize new sensors. All that it accomplishes is force the car to once again understand which of the four tires on the spreadsheet is located where (front left, back right, etc..). Only vehicles that display individual tire pressures are required to have this.That's it. Most auto shops (Autozone, O'Reilys, etc.) will let you borrow one for free if you want to know what your current sensor IDs are so you can use them to program those same IDs to make this whole process faster. But none that I found allowed you to use one with programming ability at all. Most tire businesses I contacted wanted me to schedule an appointment, but most will install these sensors and program my car for roughly $6 per tire. Just to provide some approximate figures I discovered.We can only hope that this is useful to one person who wants to purchase inexpensive sensors but is unsure of their use. These versions are programmable, which is absolutely unnecessary unless you want them for a wide variety of vehicles or if you want them to match your current tires (either because they broke or because you have two sets of wheels, one for the summer and one for the winter) and want to swap them out without having to reprogram the vehicle.
3.9/5
TPMS SENSOR PROGRAMMING:The Programming function allows users to program the sensor data to the MX-Sensor and replace faulty sensor with low battery life or one that is not functioning. The scan tool is easy-to-use with a proven efficiency and guaranteed accurate results.
ACCURATE & FAST CAR DIAGNOSIS: A new generation TPMS diagnostic & service tool specially designed to activate all known OEM/Universal TPMS sensors, and provide users with direct access to the vehicle’s ECU through OBD II connection, thus allowing users to reprogram sensor IDs and retrieve/clear TPMS DTCs, helping technicians to quickly find out faulty TPMS and turn off MILs.
POWERFUL&SIMPLE:TPMS Sensor Check allows activating of TPMS sensor to view sensor data such as sensor ID, tire pressure, tire temperature, sensor battery, sensor position, frequency. It also sends the sensor data to vehicle’s ECU to let the ECU learn the positions of sensors whenever wheels are rotated or sensors are replaced.
TPMS RELEARN:This function provides users with quick access to the vehicle’s ECU, enables users to do TPMS diagnostics, such as reading/writing sensor IDs on vehicle ECU and reading/ clearing codes of TPMS system, and to save data for later reviews and printing.
EASY TO OPERATE:The Review Data function allows user to view and print out saved data of the latest TPMS diagnostic recordings by the service tool.After the user finished the TPMS test, the tool is capable of presenting all of its stored TPMS data in a HTML file when connected to a PC via an USB cable.
$234
This tool was on sale, but not by much, so I bought it. I wanted to utilize this to reset a third-party sensor I installed in my 2011 Dodge Nitro. I paid the dealership about $60 only to reset the sensor, but later found out my car doesn't have that capability. The only method to program it is to drive it for a little period of time at a low pace while maintaining the right tire pressure. I purchased this gadget since my sensor indicated that it could not be located. If anyone is curious, I tried unplugging the battery in my car, but the problem returned right away.Returning to this fantastic tool My sensor was reset, but my issue was not resolved. However, because this tool provides for additional capabilities with its own sensors, I will be purchasing compatible sensors for it. The tool contained information on how to activate three distinct reset techniques as well as how to utilize the tool itself to reset them. It can inform you of the connection and battery level, tire pressure, and other awesome information. In general, it delivers on its promises and does so effectively. I think the "kink" I encountered was a software problem. The gadget appeared to have jammed one of the times I plugged it in, but I didn't update it right away. It became unresponsive and would not load. It's a rare glitch, so I can't test whether a software upgrade would fix it. I gave it five stars even though I would have like greater customizability with various sensors because in the end, the problem was with my sensor. The tool will be useful with my other vehicles and the sensors I intend to purchase the next time, so I'm keeping it. Do keep in mind that this device solely handles TPMS issues; it cannot detect or resolve engine light problems.
Most tire shops will install TPMS (tire pressure monitoring system) sensors when you purchase new tires. They will also check the condition of your TPMS sensors and let you know if they need to be replaced.
Yes, Autozone does relearn TPMS.
Walmart does not install TPMS sensors, but it does sell them. You can find TPMS sensors at most auto parts stores, as well as at Walmart.
If your low tire pressure light is on, it means that one or more of your tires is low on air. To get the light to go off, you'll need to add air to your tires until they are all at the proper pressure. You can find your tire's recommended pressure in the owner's manual or on a sticker inside the driver's door. Once your tires are inflated, the light should go off.
If your car's tire pressure monitoring system (TPMS) is giving you a warning light, it may be time to reprogram it. You can do this without any special tools. First, check the pressure in all four tires. If they are low, inflate them to the correct pressure. Next, reset the TPMS by pressing and holding the reset button, usually located on the dash. Finally, drive the car for a few miles to allow the system to relearn the new tire pressure readings.
COPYRIGHT © 2019