You can soak your vacuum filter in vinegar to clean it.
Yes, you can wash your vacuum filter. However, you should check your vacuum's manual to see what type of filter it has and what the manufacturer's recommendations are for cleaning it. Some filters can be washed with soap and water, while others need to be cleaned with a special solution.
Yes, you can wash your vacuum HEPA filter. You should wash it every three to six months, or as needed.
Yes, you can wash a vacuum filter with soap. However, you should make sure that the soap is mild and that you rinse the filter thoroughly afterwards.
4.9/5
★ MAXIMUM-EFFICIENCY FILTER TECHNOLOGY ★ Complete with 2 foam filters with 60 PPI density, 2 ultra-thick felt filters with a textured surface, and 1 HEPA filter with H12 efficiency to trap most allergens, our Shark replacement filters will be your go-to option when it comes to keep the house clean for your loved ones!
★ KEEP YOUR SHARK HEALTHY ★ Wondering why after a while your vacuum seems to not be working so well? It’s the dirty and clogged filters to blame! When you frequently change filters, you ensure that your vacuum does its job correctly and works optimally! You have to remember to change foam/felt filters every 3 months and HEPA filter every 6 months. Our 2+1 filter set is the best-valued pack which lasts you 6 months.
★ WASHABLE & REUSABLE ★ Our set of premium quality Shark Navigator Lift Away filters is bound to last you longer, thus saving you more money and hassle! Simply rinse with clean water and let it completely air dry before reusing them. Simple, effective, easy to use and clean, you’ll just love them!
★ 100% SATISFACTION OR YOUR MONEY BACK ★ We at GreenVac Shop love our product and we want you to love it too. That’s why we offer you a full refund in case you’re not satisfied! So don’t wait anymore and try it for yourself! You won’t find a RISK-FREE deal like this anywhere else!
★ QUALITY FILTER SET FOR YOUR SHARK ★ Compatible with NV350, NV351, NV352, NV353, NV354, NV355, NV356, NV356E, NV357, NV358, NV360, NV370, NV391, UV440, UV490, UV540, UV550, NVLFT199. This set of identical to the original filters you find in your Shark vacuum, will be the instant favorite for every Shark Navigator Lift-Away Owner.
$234
I never review anything. I simply don't care. However, it was a wonderful experience. Because one of my five cats spotted the foam filter while it was air drying and chewed part of it off, I went online to hunt for the foam filter that I actually remove and rinse out every week. After washing it every single week for more than a year, it was also beginning to look a little frayed.As others have noted, these replacement filter components are superior to those that came with my Shark vacuum and fit in it flawlessly. I didn't understand the larger filter that was included with the foam filters, but it turns out that it replaces a filter I was unaware even existed. Yes, I neglected to read the instructions (I don't need no stinkin' instructions!) I therefore changed every filter, and my vacuum is now brand new. Have I mentioned that I own 5 cats? I may use my vacuum a little bit more than the average person since I clean up the litter that they disperse. However, I will now periodically replace the filters, so the vacuum should last for a very long time. We appreciate the existence of this seller, GreenVacShop!
4.9/5
4.Package Includes: 3 Foam & 3Felt Filter and 1 HEPA filter
2.Compare to Part # XFF350 & XHF350
5.30 days full money back Guarantee, Good price and high quality, Pls contact us first when you met some problem, we will reply you asap.
3. Easy to replace, Washable and Reusable
1.Fits Shark Models: NV350, NV351, NV352, NV355, NV356, NV356E, NV357, NV360, NV370, UV440, UV490, UV540, NVLFT199
$234
I was extremely happy with the service I received from this seller, and I absolutely adore my Shark Navigator Lift-Away vacuum. I was wondering why I wasn't picking up as much dirt when I realised the short hose had a cut in it. Now that the hose has been changed, along with new filters, a cleaning DYNAMO!!!!! THANK YOU for MANY hours of excellent cleaning!
4.8/5
Item includes :2 Washable Foam and Felt Pre-Filter Replacement Kits & 1 Hepa Filter
Please attention : NV350, NV580, ZU560 are very similar with each other. The shape of Foam & Felt Filter are nearly same, while there is a little difference among the hepa. The forth pic on the left is the detail difference. The item of this page is fit for NV350 series machine; For NV580 series, it is https://www.amazon.com/dp/B07KBB28WQ/ ; For ZU560 series, it is https://www.amazon.com/dp/B07WQJQ8SK/ .
100% Compatible with Original machine, Absolutely Essential for Allergy Sufferers
Made of high-strength and environmental protection material
fit Shark Navigator Lift Away models NV350, NV351, NV352, NV355, NV356, NV356E, NV357
$234
The Smartide filter kit really impressed me. We bought this to replace the HEPA filter (an outside plastic component) and felt/foam (two stacking inside parts) in our Shark Navigator LiftAway Professional.Some others had complained that some kits or pieces were missing, but I'm happy to report that our order came with two sets of the foam/felt filter (each individually wrapped) and the plastic HEPA filter.The parts allow me to wash and allow drying while making sure there are always filters in the vacuum while fitting just as well as the OEM filters.The fact that the felt piece really has a tab attached to the top, making removal quite simple, is something I thought was a wonderful "additional" feature.Our vacuum's suction, which had declined over the years despite routine cleaning, seemed to be immediately restored when we initially installed the new filters. I'll probably keep switching these two out and cleaning frequently, but I'm happy to know there is a good, inexpensive brand I can use in the future.These would be a great replacement for a Shark vacuum, in my opinion.
4.8/5
Washable and Reusable
Kit includes 4 pcs foam & filter and 2 HEPA filter replacement kits as shown in the picture
Made of high-strength and environmental protection material
100% Compatible with Original machine
For Shark Navigator Lift Away models NV350, NV351, NV352, NV355, NV356, NV356E, NV357,Compatible for Shark Part # Xff350 & # Xhf350
$234
My photos show that my filters REALLY needed to be thrown out. My parents gave me a shark vacuum, which I immediately loved. However, after a few months, I discovered the suction was not as strong as it had been. I was aware that the filters needed to be changed. I found these filters after doing a lot of research, and after reading the reviews, I decided to buy them. And I am so happy that I did! They not only fit nicely in my lift-away navigator, but they also seem to be made of far superior materials than the original ones that came with the vacuum! Since I've started utilizing these filters, there hasn't been a single complaint. These filters should last me forever, but in the unlikely event that they don't, I now know where and how to get more!
4.7/5
Kit includes 4 pcs foam & felt filter and 2 HEPA filter
ATTENTION:This item is fit for Rotator NV500 series.It is NOT fit Rotator NV650 & NV750, NV755 & UV795, NV680 & NV800 series. Please see the difference on the second picture. If you need to buy NV650 & NV750 filters ,Please buy from https://www.amazon.com/dp/B0716RXK3X
Made of high-strength and environmental protection material
100% Compatible with Original machine
Replacement Foam & Felt Filter and HEPA filter for Shark NV500, NV501, NV502, NV503, NV505, NV510, NV520, NV552, UV560 Compare to Part # XFF500.
$234
When compared to similar products, these are reasonably priced. The disk filter is little too large, but with careful positioning, the foam filter base tightens everything up. The foam filter fits well. I could also trim a little bit off, but I washed the old set a lot before obtaining the new set, and they do shrink up a little bit when washed.I purchased this machine in 2014, and this is the first time I have replaced the filters in it. I had just been washing them once every few months. I have not washed the HEPA filter, thus I purchased this set more for it than the foam filters. It was a fantastic fit.The NV552 vacuum for which I bought these filters is this one.Lift-Away Shark Rotator Pro Complete (NV552)
4.7/5
Manufactured by Wolfish to replace Dyson Part # 965661-01
Package include 3 Pack Filters
Designed to fit for Dyson models: V8 Absolute, V8 Animal, V7 Absolute, V7 Motorhead,V7 Animal Plus, V6 Absolute, V6 Animal, V6 Animal Extra, V6 Motorhead, V6 Motorhead Exclusive, V6 HEPA, V6 Cord-free, V6 Baby+Child, V6 Car+Boat, V6 Top Dog, V6 Trigger, DC59 Animal Exclusive, DC59 Animal V6, DC59 Motorhead, DC58.
High quality filter which helps to improve the suction of the vacuum cleaner.
Washable and Reusable Pre-Motor Filter.should be replaced every 2-3 months.
$234
Our dog sheds like he develops a full coat overnight, so we were given a Dyson stick vacuum for Christmas to assist manage the volume of dog hair (ughhh). However, even though nothing foul had ever been vacuumed up, the vacuum exhaust began to smell awful. According to Dyson's directions, I attempted cleaning the original purple filter, but it somehow made the odor worse. Type these filters in. I didn't realize I could replace the filter for so little money. These are equally as affordable as the original filter and totally compatible with the vacuum. What a gift it is to be able to vacuum once more while breathing in and out through my nose simultaneously!
4.7/5
Fits: Mighty Mite, Pet Lover, Sanitaire Commercial Canister Vacuum Cleaners
Dimensions: 6 3/16" X 4 5/16" x 2 7/16"
(1) Eureka Sanitaire w/activated Charcoal MM Mighty Mite HEPA HF8 Vacuum Filter
Fits original manufacture part numbers below: #60666B, 60666, 60666A, 60666-6, 60666B-6, EUR 60295-6
EnviroCare Premium aftermarket Part #253
$234
This is a need for anyone with pets or a family who suffers from allergies or other respiratory conditions. Dust particles don't come back out after being sucked up with the Mighty Mite Pet Canister Vac, unlike with other Vacs.
4.6/5
Kit Includes: 2 Pcs HEPA Filter, 4 Pcs Foam & Felt Set
High Quality and Washable & Reusable
Made of high-strength and environmental protection material; 100% compatible with original machine
Fits Shark Rotator Powered Lift-Away Deluxe XL Capacity TruePet AX950,AX951,AX952,AZ1000,AZ1000W,AZ1002BRN,NV650,NV650W,NV651,NV651Q,NV652,NV750W,NV751,NV752,NV752BRN,NV765,NV830,NV831,NV835,UV541CCO,ZU881 Vacuum Cleaner Compare to Part # XFF650 and XHF650
This Kit NOT Fits NV500,NV755,NV680&NV800 Series,If you need NV500 Series Filters,Please buy From https://www.amazon.com/dp/B06XCTVM12
$234
I debated whether to deal with the smell emanating from my vacuum or get a new one. The vacuums that are currently on the market are incomparable. Since I had nothing to lose, I reasoned that I should try these filters and hope for the best. They fit exactly and were of excellent quality, which made me very happy. My vacuum now functions properly and smells brand new thanks to this item! That is unbeatable, and the cost is also very reasonable. When the time comes, I'll most certainly make another purchase.
4.5/5
Dimensions: 8 in. H; 6.75 in. diameter, Item Weight: 4 lbs.
Fully assembled, so get it home and start using it, Available in white/red
The Craftsman General Purpose Red Stripe Filter is great for cleanup of everyday dirt like sawdust, wood chips, job site debris and car or truck dirt
Fits all Current Craftsman Wet/Dry Vacs 5 gal. or larger, Also fits 6 gal. vacs made since 1992 and 8, 12, 16, 32 gal. vacuums produced since 1988
$234
For my vintage red 9-gallon Sears Craftsman Model 113.xxx shop vacuum, I ordered this 17816 filter in 2015. It fits wonderfully and is of high quality. comes with a plastic cap-nut and is packaged in a Craftsman-branded box. Push it down over the cage to seat it, then spin the plastic cap-nut on. Mine goes over a 4" diameter x 7" tall plastic cage with a plastic 1" long stud on top with a 7/16"-ish thread. I'd suggest looking in that cage first to remove any debris caught there. You can try and pick any debris out through the cage slots or just pop the whole cage off with some eff.For your information, the filter you received is not a simple round plastic plate with a hole in the center for the stud, as shown in the picture.Choose from one of the four identical-size filters in the product line that best suits your needs: 1) 17816 general purpose (this filter); 2) 17907 for finer dust and ashes; 3) 17912 for the highest level of filtration for fine pollen and allergens; and 4) 17292 wet-only filter.
4.4/5
This filter is NOT washable - It’s a good idea to buy an extra filter to always have one ready to use!
Replacing prevents dust and debris from cycling back out of the vacuum and into your home!
Premium allergen filtration
Note: Packaging may vary
See description below for vacuums that fit this accessory!
Did you know that your vacuum has filters that should be checked frequently? Depending on your household, it is recommended that you replace your vacuum filters every 3 to 6 months. Refer to your BISSELL vacuum owners manual for replacement instructions.
$234
emits a lot of smell—not an overwhelming quantity, but plenty. When you have pets, vacuuming occasionally may result in some unpleasant scents, but this is far preferable than using one of those carpet powders that simply sweeps more dust into your home.
A HEPA filter is not required on a vacuum, but it may be beneficial depending on your vacuum's intended use. If you have allergies or asthma, a HEPA filter can help to reduce the amount of allergens and dust in the air that you're exposed to.
Yes, vacuum filters need to be replaced regularly. Depending on the type of vacuum and the frequency of use, filters should be replaced every 3 to 6 months.
Mold spores are very small and can be easily vacuumed up. However, the vacuum cleaner must have a HEPA filter to prevent the spores from being released back into the air.
The easiest way to make your vacuum filter dry faster is to simply remove it and place it in a sunny spot. If you are unable to do this, you can also try using a hairdryer on the low setting.
A HEPA filter can last anywhere from 6 months to a year in a vacuum. It all depends on how often you use your vacuum and how much dirt and debris are being vacuumed up. If you have a lot of pets or live in a dusty area, you may need to replace your filter more often.
COPYRIGHT © 2019