Most inflatable pool slides are safe when used as directed. However, there have been some reports of injuries associated with inflatable pool slides, so it is important to use them safely. When setting up an inflatable pool slide, be sure to follow the manufacturer's instructions carefully. Make sure the slide is on a level surface and is not near any sharp objects. Use only the recommended inflation levels and do not overinflate the slide. Be sure to have adult supervision when children are using the slide.
A diving board can be a great addition to a fiberglass pool, and can provide hours of fun for kids and adults alike. There are a few things to keep in mind when adding a diving board to your pool, however. First, be sure to check with your pool manufacturer to see if your pool is rated for diving – some pools are not, and adding a diving board could void your warranty. Second, be sure to install the diving board according to the manufacturer’s instructions – improper installation could also void your warranty. Finally, be sure to have a qualified pool professional install
Yes, you can add a rock waterfall to an existing pool. You will need to consult with a pool professional to determine if your pool can accommodate the addition of a rock waterfall. Generally, rock waterfalls are added to inground pools.
If you have an existing pool and would like to add a slide, there are a few things you need to consider. First, you need to make sure that your pool is big enough and has the proper depth for a slide. Second, you need to make sure that the area around your pool is level so that the slide can be installed properly. Finally, you need to contact a professional pool installer to get an estimate for the cost of adding a slide to your pool.
4.5/5
Compact pool slide hours of fun; ideal for limited deck space
Installation required; backed by 3-year warranty
Elegant rotomolded design for strength and durability; measures 4 feet, 1 inch tall with flume length of 6 feet, 10 inches
Fully CPSC compliant for swimming pool slides; salt pool friendly
Accommodates sliders up to 175 pounds
$234
Nice slide that so far appears sturdy. Not as slick as I would like to see it. Children frequently pause and don't slide into the water as rapidly as they could; perhaps this will improve over time. I advise mounting the oval bottom to the concrete decking initially. I used exposed aggregate pool decking, and using a hammer drill, I had to use 5–6 masonry bits to make 7 holes. Once the slide is mounted, the bolts are challenging to drive, so assemble the slide just enough to identify the location of the oval mount. mount it and drill it. After removing the nuts, assemble the slide completely. With a slide mounted to it, the three bolt holes under the ladder are simple to drive.For their own safety, young children should never climb a slide alone. The exposed aggregate was the biggest problem, and I have a lot of expertise drilling concrete.
4/5
Elegant rotomolded design for strength and durability; measures 7 feet, 4 inches tall with flume length of 9 feet, 10 inches
Accommodates adults and children up to 275 pounds
Thrill-ride pool slide with curves and dips designed for pools with limited deck space
Installation required; backed by 3-year warranty
Fully CPSC compliant for swimming pool slides; salt pool friendly
$234
You already know that pool slides are ridiculously overpriced if you're reading this review. We waited a year and a half for these to go on sale in the hopes of getting a good deal, but for some reason they never do. A solid warehouse offer might be the way to go if you can find one.I put the slide together and installed it myself. It was difficult to construct and came in a hefty package. Getting the ladder's two sections to bolt together proved to be the most difficult portion of assembly for me. Even though the holes didn't appear to line up perfectly, it eventually came together with a lot of patience. I suggest watching the video of the SR smith assembly.The hardest part of my install started once everything was assembled. My pool deck is made of travertine rather than cement or cool deck. Since the travertine is not set on cement, I had to remove two parts of it, dig significant holes, connect the water source to the slide, and add around 20 bags of cement. Everything is possible, but it takes time. In case you need to do something similar, you can get an idea from the photographs I've attached.You will also need longer stainless steel wedge anchors for a paver or travertine installation. I ordered the stainless steel ones from Amazon because I couldn't find them locally. The offered 5.5 inch bolts were not long enough to pass through the slide footing, the travertine, and into the cement, so I ordered a box of 8 inch 304 stainless steel wedge anchors. (I waited a week for the cement to harden before installation.) You will need longer anchors if your pool deck is made of pavers or travertine.Even though installing the pipes and preparing the foundation took a lot of work, it has already been worthwhile. I saved a ton of money by doing it myself, and I also know it was done correctly. Our children adore it. The neighborhood kids repeatedly form a queue at the slide. The slide is quick, and the water flows nicely. We connected it to a 3/4-inch deck jet and installed a second ball valve so that we could turn on either the slide or the deck jet individually. Much more people use our slide than our diving board.We reside in Arizona, yet despite the freezing pool, the kids are still utilizing it in November because they adore it.
3.9/5
Can be surface or in-deck mounted to accommodate any pool (flanges must be purchased separately - part number 75-209-5866)
High volume water delivery system can be plumbed through the pool's return line or connected to a garden hose
Meets Consumer Product Safety Commission (CPSC) standard for swimming pool slides; backed by a 3-year warranty
The Rogue2 slide has a retro look with a thoroughly modern flume that makes this slide the new standard for backyard fun
Elegant rotomolded flume design for strength and durability; measures 7 feet tall with flume length of 9 feet, 3 inches; Accomodates adults and children up to 250 lbs.
$234
Love this slide so much!Due to its lower cost and what appeared to be a larger sliding surface, we chose the Rogue 2 over the Interfab Wild Ride.We bought from Amazon because it was significantly less expensive than local shops. After much deliberation with neighborhood pool retailers, we decided to buy a gray slide since we were worried that the white and blue might become yellow and fade over time.Delivery went well. The delivery date was met. We had several problems because the freighter sent a line driver to deliver even though they said Amazon had cleared a 2-man truck and I didn't need to help with unloading. He was a treat, though, as he managed to maneuver the very huge box from the corner to our house by unloading it (the entire thing comes in one box).Some findingsI took on assembly alone and had little problems. If you know how to use tools and put together simple mechanical systems, it is probably possible. Additionally, SR Smith produced a decent assembly video that is well worth seeing.The only element of construction that I had issue with was joining two sections of the sliding runway; they simply didn't fit together well and required some time and force to put together.Once the runway is put together, it does take two people to flip the slide onto its legs. The majority of the remaining tasks are soloable.I advise buying a bigger anti-seize bottle because the one that comes with the slide is difficult to use and I enjoyed applying more. The extra anti-seize was something I got from Amazon.I connected my pool's water supply (the booster pump running my Polaris). It wasn't hard, and I believe it's preferable to utilizing a tap and hose.Almost everything put together as intended and quite effortlessly, with the exception of the runway. From the box to the assembled slide, the hands-on time was roughly 4 hours.People adore the slide. Our grandchildren's ages have ranged from 4 to 14. Adults who went sliding did so and considered the runway to be ample.I have no regrets about choosing the Rogue 2.
3.9/5
Thrill-ride pool slide designed with curves and dips for hours of family fun
Meets Consumer Product Safety Commission (CPSC) standard for swimming pool slides; salt pool friendly
Safety is a top priority - sturdy molded in handrails and enclosed ladder. Deep and wide flume. Children under 48 inch tall must be supervised at all times when using this slide
Accommodates adults and children up to 275 pounds; Installation required; backed by 3-year warranty
Elegant rotomolded design for strength and durability; measures 8 feet, 7 inches tall with flume length of 14 feet, 4 inches
$234
Since pool slides are expensive, I have reviewed a lot of them. There are a few options in this pricing range, and I was prepared to pay roughly $3,000 on the slide. Interfab and SR Smith's turbo twister were my top picks. I like the Interfab, but when I saw it at my friend's house, I didn't think it gave off a very substantial feeling or appearance because it shook a little when the user down the slide. In addition, TurboTwister has a larger, taller frame and no separate leg that requires support.Although I put this slide show together by myself, it would go much more quickly and easily with two people. This slide show requires at least two individuals to put it together. All stainless steel bolts and nuts must have anti-seize, or else they will melt together and lock on you. They do indeed come with a pack of them, as I discovered the hard way. There are six slide, base, and stair sections, and since all of the seals are already in place, water won't leak between the pieces. The stairs with handles appear substantial and are well-built. It's frightening at first, but only from the top down. There are around 8–10 locking bolts, therefore you must use the correct bit and a powerful drill to secure the slide to the concrete floor. Cordless, battery-operated drills will not work. The slide is secured down and highly secure once they are firmly anchored to the ground.It appears considerably nicer than it does in the picture. The return water is considerably warmer than my extremely cold ground water, so I connected it to the 2x1/2" tubing that was included with the return pool pump, and it actually shoots out more water than a turbo flow. There is no comparison to a garden hose. The slide is a hit with both children and adults, and we are very happy with the purchase.Your guests will undoubtedly say "wow," and your kids won't ever again complain about being bored.
3.9/5
11-Foot long deep flume runway, available in left or right curve
$234
awesome slide nicely bundled. I spent around three hours putting it together. Instead of utilising the pack that comes with the slide, I suggest purchasing an anti-seize at your local Home Depot or Lowe's. Using the anti-seize is less messy if you have a tip applicator. Washing the substance off your hands is difficult.You need a second person to move the slide around during some of the installation. Although the installation and setup are nicely demonstrated in a YouTube video (just type in "wild ride slide installation"), the slide's accompanying instructions were also very helpful.I bought this on Amazon for a lot less money than I would have at my neighbourhood pool supply store.
3.9/5
9-Feet long deep sided runway, available in left or right curve, must purchase the four on deck mounts separately if adding as an on deck slide
Sturdy aluminum ladder and grip-around handrails spaced for safe climbing
High flow Zoom Flume water delivery system
Designed to the highest safety and performance criteria in the industry
6-Feet High (72-inches) at runway entry
$234
Slide performed exactly as promised. The slide should have been in one piece, but it didn't seem feasible given my budget. Stronger bolts and anchors might have been used. To strengthen the slide, my contractor replaced them with tougher ones. Overall, it is excellent. Yesterday, we held a party with some older teenagers, and they all enjoyed going down the slide (albeit with my strict rules).
3.8/5
Cpsc (Consumer product safety Commission) compliant removable and portable pool slide, meeting federal safety standards for 48 individual tests (go #18166 - 05/07/2019) and patent pending (U.S. Patent application no. 62/863, 194)
Fully rotomolded construction provides strength and durability for years to come - enclosed, textured steps and integrated handholds for safety - designed for children up to 125 lbs/57 kg
Comes partially assembled and includes a custom dolly to easily roll slide away on and off the pool deck - requires minimal deck space (3 feet x 7 feet) for maximum fun
Aesthetically designed in colors that blend/compliment the pool and patio areas (Taupe and Gray)
For in-ground pools only - salt pool friendly - built-in UV inhibitors to resist fading
$234
This thing is really awesome. I bought this one after researching many, many slides because of its many excellent features. The key factor in choosing it was that it is the ideal height for children. To keep the slide slippery, there is a hose installation. The setup is simple, and the directions are clear. If we move to a home with another pool, we can take it with us because it is portable. It keeps its integrity nicely in storage during the winter and is just really fantastic. The business is highly accessible and promptly handled any questions or issues we had. Since it is a significant package, they are customer-focused and will keep you updated every step of the way along the shipment process. Finding a business that cherishes its consumers is encouraging. Purchasing this slide is absolutely worthwhile. At a recent birthday party, the kids used this nonstop and almost completely forgot about the diving board.
2.8/5
5 separate air chambers for extra safety and durability
Great for most any in ground pool and any above ground pool with a sufficient pool height deck
Constructed of super strong 20 gauge (0.50mm) vinyl materials and strong fused seams
Intex Kool Splash Inflatable Water Slide
Accepts a garden hose for built in sprayers to keep the waterslide surface wet and fun
$234
Grandchildren and elderly family members who are still youthful in heart can now spend countless hours playing in the pool thanks to the high-quality slide.
Most people believe that you cannot put a slide in a 4ft pool, but that is not the case. You can actually put a slide in a 4ft pool, but you need to make sure that you have the right kind of slide. There are two main types of slides, and each one has its own benefits and drawbacks. The first type of slide is the inflatable kind. These are the most popular type of slides, and they are also the most affordable. However, they are not as durable as the other type of slide, and they can puncture easily. The second
Yes, you can use a slide with an above ground pool. There are a few things to keep in mind, though. First, make sure that the slide is rated for above ground pools. Second, be sure to follow the manufacturer's instructions for installation and use.
If you have a backyard pool, you've probably considered adding a slide. Pool slides can provide hours of fun for kids and adults alike. But before you can start sliding, you need to attach the slide to the pool. Most pool slides come with all the necessary hardware for attaching the slide to the pool. You'll need to use the bolts and screws that come with the slide to attach the slide to the pool deck. It's important to make sure the bolts are tight so the slide doesn't come loose while someone is using it. Once the slide is attached to
A pool slide gets water by being connected to a water source, such as a hose or a swimming pool. The water is then pumped through the slide and onto the riders.
Adding a rock slide to a pool typically costs between $500 and $5,000, depending on the size and complexity of the slide.
Adding a slide to a pool can be a great way to add excitement and fun for kids and adults alike. But how much does it cost to add a slide to a pool? The cost of adding a slide to a pool will vary depending on the size and type of slide you choose. A small, basic slide can start around $300, while a larger, more elaborate slide can cost upwards of $1,000. Of course, you’ll also need to factor in the cost of installation. Hiring a professional to install your pool slide can add another
COPYRIGHT © 2019