You can use PB blaster to clean a gun, but it is not the best option. PB blaster is a lubricant and will not remove all the dirt and grime from your gun. It is best to use a gun cleaning solvent or gun oil to clean your gun.
Yes, you can use Simple Green on guns. It is a safe, non-toxic cleaner that will not damage your gun.
No, you should not use vegetable oil to clean a gun. Vegetable oil can leave behind a sticky residue that will attract dirt and grime, and it can also cause corrosion.
No, Hoppes 9 does not expire.
4.8/5
100% MONEY BACK OR REPLACEMENT WARRANTY- We place value on every customers experience. We provide 100% Money back or replacement warranty if there is any quality issue or any reason that caused you dissatisfaction with this item.
2 oz Hoppes No 9 Cleaner Solution - The most universally used solvent for removing primer, powder, lead and metal fouling for preventing rust. Quick, super-efficient, safe and easy to use. Flows freely and penetrates rapidly. A favorite with sportsmen throughout the world.
All Products Made in the USA!
40-50 High Quality Westlake Market Cotton Patches for Cleaning Gun.
2 oz Hoppes No 9 Lubricating Oil - High viscosity oil refined to perfection for use in firearms, fishing reels and other precision mechanisms. Does not harden, gum or become rancid. Gives extra-long service.
$234
It's disheartening that a tool that costs more than $100 need upkeep immediately away, but I decided to buy this item because of someone else's review.It did wonders for keeping my tools in great condition, so make sure you have enough of ventilation when using it. I would most definitely buy it again.
4.6/5
Zippered Compact Padded Case: Keeps everything neatly organized; Holds all the necessary cleaning tools; Case sized: 6.5" x 3.6 "; 16 Pieces handgun gun maintenance system in a high performance zippered organized pouch bag
Stainless Steel Cleaning Pick: Stainless steel picks helps to clean stubborn areas on your firearm
Life Time & Money Back Guarantee: The cleaning rod, jag and slotted tips are all made of durable sturdy bronze brass which are guaranteed a life time.
Quality 10.5" Handgun Cleaning Rod: 2 Piece brass cleaning rods thread together to form a 10.5" rod
Gun Cleaning Supplies Includes: .22Cal., .357Cal./.38Cal./9MM, .40Cal., and .45Cal. phosphor bronze bore brushes and brass jags, large and small bronze slotted tips, and 100 pcs gun cleaning patches, nylon brush and metal gun cleaning pick
$234
Cleaning your firearms is so much simpler with this set. I never imagined that a rifle cleaning kit would get me so fired up. My shooting mates were all informed, too. The case has a sturdy shell and is perfect for keeping things organized. Since I only have the 9mm attachments, I can only say positive things about them. extremely durable and well-made. The Jag is the ideal size and does an excellent job of cleaning up. I often run a moist pad through the jag, scrub with the copper brush, and then repeat until they are clean. This set has made cleaning my guns really simple. I've used it seven or eight times so far, and nothing has changed. I was making do with the $10 plastic Hoppe's kit that is available everywhere, but you get what you paid for. I used to fight and detested having to clean my weapons. It isn't as difficult to do it now. Even if the included cleaning pads are quite thin and ineffective, the kit is still a fantastic deal. I'll get another one if I misplace it or if something starts to break.
4.5/5
INNOVATIVE DESIGN: Exclusive design includes exploded parts diagram with weapon parts labels, along with cartridge & receiver dimensions. Each part is labeled! Other mats have numbers near the part, which you must then cross reference to find the actual part's name
PREMIUM MATERIALS: Stitched border, smooth black polyester top with waterproofing coating, white heat transfer printing prevents smearing, and non-slip natural tree rubber backing allows for easy roll-up for storage. Perfect pad for a rugged gunsmith, home hobbyist, and a hardcore gaming mouse pad.
PROFESSIONAL GRADE: Designed with input from gunsmiths, our gun cleaning mat is built to the quality and precision standards you expect from a professional. Clearly labeled parts, easy to read, thick padding & stitched edging - clearly the best!
LARGE PROTECTIVE SURFACE: Large 36x12" gun cleaning pad helps protect your kitchen table, work bench, or shooting table. Big enough for an entire firearm, sized to accommodate parts such as hanguards, muzzle brakes and stocks, and even have room for tools such as armorer's wrench and CLR oil. Perfect accessory for cleaning or reassembly. Unlike the competition, our mat is BOXED - perfect for gift giving!
BONUS MAGNETIC TRAY: Includes a Bonus magnetic parts try, to keep all the tiny parts from disappearing
$234
Although I haven't used this mat myself because I got it as a gift, I did check it out before giving it as a present, and it's extremely wonderful! The text and graphics are clear, and the construction quality is good. This review was mostly intended as a compliment to the seller. The "Ultimate Rifle Build 16"x36" Gun Cleaning Mat - AR15 Exploded Rifle Mat" that I purchased was advertised as including a magnetic parts tray. Although the mat was quite good when it arrived, the parts tray was not. I informed the vendor via email about the problem, and they responded by promising to send a replacement. A few days later, I received the replacement, and much to my surprise, it came with a brand-new "Ultimate Rifle Build 16"x36" Gun Cleaning Mat - AR15 Exploded Rifle Mat" kit as well as the parts tray! WOW! Fast, amiable, and outstanding customer service!! I couldn't be happier and have no qualms about recommending this product or this seller.
4.4/5
Made in US
N/A
Absolutely should be purchased alongside any of the GREAT STUFF PRO Gun Foams and Dispensing Guns
Creates air & moisture tight seal between can and Dispensing Gun
Attaches to any GREAT STUFF PRO Series Dispensing gun to void uncured foam after use
Use push-to-spray attachment on can to clean up uncured foam from various surfaces
$234
I've been using this method for a while and have learned several money-saving strategies that other users might find useful. If the valve on the cans is thoroughly and I mean perfectly cleaned with the carbon tet gun cleaner, the half used foam cans may be reused. Additionally, I had a problem where the gun flush would stop working after being used repeatedly over a long length of time. I fixed this issue by adding a new, comparable "O" ring to the tiny one on the flush can valve. This avoids the issue since the can valve is not pressed because the "O" ring shrinks in diameter as a result of compression when it is fitted into the gun. I'm hoping that this can aid other people who have struggled with the same issues with this system. Overall, this foam cannon system is excellent and far less expensive than the trash produced by using the Great stuff from retail cans.
4.4/5
Easy-feed design makes for quicker cleaning from Breech-to-Muzzle
Equipped with 8-32 threaded ends to fit all Otis cleaning components
Heat resistant up to 700 degrees F
Nomex fibers act as both a brush to loosen and a patch to capture fouling particles
Caliber specific molded rubberized core for 360 degree cleaning
10 inches of aggressive cleaning surface
$234
These are an excellent product and are built durable like pretty much everything I own from Otis, but they don't replace a thorough cleaning of your bore any more than a boresnake does.After a few passes with these and a little coat of lubricant on the rear, you will be sufficiently clean to resume shooting or to store for a few days before visiting another range. They effectively remove powder and carbon fouling but won't remove metallic accumulation (copper or lead).Similar to using an Otis cable or a rod
4.4/5
Quality 10.5" Handgun Cleaning Rod: 2 Piece brass cleaning rods thread together to form a 10.5" rod
16 Pieces handgun gun maintenance system in a high performance zippered organized pouch bag
Gun Cleaning Supplies Includes: .22Cal., .357Cal./.38Cal./9MM, .40Cal., and .45Cal. phosphor bronze bore brushes and nylon jags, large and small nylon slotted tips, and 100 pcs gun cleaning patches, nylon brush and metal gun cleaning pick
Stainless Steel Cleaning Pick: Stainless steel picks helps to clean stubborn areas on your firearm
Zippered Compact Padded Case: Keeps everything neatly organized; Holds all the necessary cleaning tools; Case sized: 6.5" x 3.6 "
$234
The kit isn't bad overall, especially when you consider the cost. But mine didn't have a handle. I received two packs of cleaning patches rather than a T-handle. (One packet of patches is depicted in the listing's photographs. I received 2.) Fortunately, I had another cleaning kit with a T-handle that matched the rod in this one, so it wasn't a complete loss. But I desired a compact, portable equipment that I could bring to the range. This is not a cleaning kit at all without a T-handle.UPDATE!!!!! I received the appropriate T-handle from the vendor along with an extra set of brass bore brushes. Today, March 26, 2018, I received them in the mail. Now that I have the little, lightweight equipment I wanted in the first place, I can take it almost anyplace. THANKS!! My rating has been increased to four stars.
4.3/5
Convenient Storage Case: Packed in plastic carrying box. The portable case holds all components keep neat and organized in the lightweight durable plastic case. The carrying handles increase the convenience of packaging and carrying. You can take it with you anywhere you go.
Universal design:The gun cleaning kit supplies for all types of shotguns, rifles and pistols. Everything you need to clean common caliber guns in one case. It is a great choice for you to make cleaning work easier.
Some of the accessories are consumable, so we prepare multiple accessories in our California warehouse. If you have any problems while using, please contact us, we'll be glad to help you.
All-in-One: 3 solid brass rods for 17-270 caliber rifles; 3 solid brass rods for 30 caliber rifles, pistols, and shotguns; 14 brass brushes; 9 bore mops; 12 spear-pointed jags; 1 black power jag; 4 slotted patch loops; 3 utility brushes; 3 muzzle guards; 3 accessory adapters; 50 3×1 1/2" cleaning patches; 4 polishing clothes;2 empty bottle.
High Quality Material. This versatile gun cleaning kit is made of high-quality materials, can clean pipes of various caliber and is easy to operate. Solid brass CNC precision machined jags and tips. The brass material can effectively prevent secondary pollution on the cleaning material. It’s more durable than plastic material. Brushes of different materials can handle different surfaces. The brush removes carbon deposits well, making the cleaning process quicker and more efficient.
$234
I purchased this kit to add to my bundle after using up several of the brushes for cleaning gun barrels. This package size is adequate for cleaning weapons at home but probably not for use at the range. The fact that every rod thread in this kit is the identical and can be fitted with the appropriate size cotton or bronze brush is what I enjoy about it the most compared to my previous favorite brand of kit. A few of my older items only have "the end" rods that will fit the brushes, making them difficult to use. The rods in this kit are made of copper rather than aluminum, which I prefer much more. There are two variants of this kit available, and I chose the less expensive one. The cleaning pad push head is made of plastic rather than copper, but since I don't use them very often, these plastic tips will last longer than the copper brushes, so I paid less for essentially the same item. It is a simple cleaning kit that works with the majority of handgun calibers. The most common rifle caliber brushes are surprising to see. There are 17.20 and.50 caliber included. It is really good since shotgun brushes contain the well-known 12 20 410 gauge. I only used it once to clean a handgun and discovered everything to be in functioning order. How durable is this kit? Because it fits better than some of my other kits, I think it is a little better, and I anticipate that it will endure for a very long time.
How often should I oil my guns in storage? You should oil your guns in storage every 3 months.
It's important to clean your gun regularly to keep it in good working order. How often you need to clean it will depend on how often you use it and what type of gun it is. A good rule of thumb is to clean it after every use, or at least once a week.
If you're looking for a quick and easy way to protect your guns from rust, you can't go wrong with Vaseline. Just apply a thin layer to all exposed metal surfaces and you're good to go. Vaseline is also great for lubricating moving parts, so your guns will function smoother for longer.
Yes, WD-40 is fine to use on guns, as it will not damage the metal or harm the finish. It's actually a good idea to use it on a regular basis to clean and protect your firearms.
A gun barrel should be oiled to protect it from rust and corrosion.
If you're planning on doing any serious shooting, then you should absolutely oil your gun before shooting. Oiling your gun will help keep it clean and prevent any potential rusting. It will also help keep your gun working properly and make it easier to clean after shooting.
COPYRIGHT © 2019