No, bigger fans are not necessarily better for a PC. In some cases, bigger fans can actually produce more noise. It is more important to focus on the quality of the fan rather than the size. Make sure to get a fan that is durable and will not produce a lot of noise.
No, you cannot shut the door on a fan grill. The fan grill is designed to allow air to flow freely through it and shutting the door would impede that flow. Additionally, the fan grill helps to protect the fan blades from becoming damaged and shutting the door would make it more likely for something to come into contact with the blades.
To a certain extent, yes. By adding more material to the fan blades, you are inevitably going to reduce the amount of airflow. The more material you add, the more airflow you block. There are ways to offset this by increasing the size of the fan or by using a more powerful motor, but there is always going to be some airflow reduction.
No, fan size does not matter for a PC. The important factors for a PC’s fan are the airflow and the static pressure.
4.5/5
Black Color; Ultra fine Aluminum Mesh filter provides great dust reduction properties
Compatible with: Most of Standard 120mm Fan / Vent (Mount Hole Distance: 105 x 105mm)
Idea for your desktop PC prevent dust, prevent the cable being cut by the fan, protect finger safety...etc
Brand New & High Quality Fan Vent Filter Finger Guard Grill
Package Includes: 4x Fan Filter Grill + 16x Screws (fan in the picture is not included)
$234
Very little air could pass through these screens if they were truly "ultra fine." The perforations, in my estimation, are about half the size of regular screen door material. My definition of "ultra fine" is > 1/10th mm.There are sixteen short screws included in the package, and they must be attached to the intake side of your 120mm fans (I'm assuming this is the intake side because there are no instructions).The most typical technique of cleaning would be wiping the surface with a moist rag because they screw onto the fan frame.Both the screen and the frame are made of metal, so they should last for a very long time. My goal was to prevent bigger debris, such cat hair and dryer lint, from gathering on the leading edges of the fan. These "grills" take the place of the guards I previously had on my fans, which could have allowed small things like pencils or small fingers to reach into the blade path.If you were careful when applying the paint, the aperture size is large enough to allow spray painting without sacrificing too much permeability. The color of silver doesn't bother me, though.Overall, I like them since they are well made, reasonably priced, and neither the sound of the 120's nor the apparent air flow have been noticeably affected by their addition. If given the chance, I would repurchase them and suggest them for the intended use.
4.3/5
Black
Wire grill makes sure it doesn't block too much airflow
Keeps stray wires or fingers safe from fans
Fits most 120mm fans
$234
This item is STRONG! It has a high-end feel and DOES the job. This is rubbed up against a number of power wires in my nouvolo steck itx case, and it doesn't bend at all. Absolutely top-notch, not even the paint chipped. I was startled by how much I genuinely enjoyed and needed this purchase.
4.3/5
Provides Great Dust Reduction Properties, Great for Keeping Your Fans and Computer Clean, Extend the Life of Computer Hardware
Compatible with Most 240mm x 120mm Fans or Vents (Note: item can attract iron case only, Not attract aluminum case)
Brand New & High Quality PC Case Fan Dust Filter with Magnetic Frame
Package Includes: 2x Fan Magnetic Dust Filter
Black Color; Ultra Fine PVC Mesh with Magnet (1.5mm Thickness / Strong Toughness / 0.8mm Hole) -- Sturdy, Durable, Easy to Clean and Install
$234
Although gushing over these might seem strange, they are excellent. As external air movers around stereo and computer equipment, I use 3 (soon to be 4) 140mm computer fans. As a result, they are bracket-mounted on shelves or hidden behind machinery rather than affixed to a computer casing. The blades can hurt and are annoying even though they won't harm you if you stick your finger in them. These covers are ideal and additionally provide some dust filtration. They look fantastic and are incredibly lightweight. They are appropriately sized and include with the mounting gear needed to attach them to the fan. I'll be placing more orders.
4.2/5
✅ã€Use for】 for the home computer chassis fan dust, speaker speaker grilles and a variety of electrical and electronic products speakers dust protection
✅ã€Package includes】 4 x Magnetic Dust Filters, and Any problem with our products, please feel free to contact us! We will get back to you whenever you have a question.
✅ã€Features】 Convenient magnetic frame design for easy installation, Computer fan filters can help you keep your computer and computer parts clean, reduce fan noise and prolong the life of your fan
✅ã€Dust filter Dimension】120 x 120mm/4.72 x 4.72"(L x W), filters are strong enough and easy installation, Sufficient quantity for daily cleaning and replacement
✅ã€Design】dust filter fan filter has ultra fine holes, protect you computer from overheating and minimize the noise
$234
Two fans are used as the main intake on a bespoke computer. I have the magnetic dust filters on top of the computer. The filters are squares with rounded corners, thus the screws holding the cooling fans in place caused all four corners to tilt up. To avoid the screws, the filter would have to be skewed roughly 10 degrees. I was able to cut out slots for the fan screws because the material is comparable to the magnetic backing sheets you can purchase in the craft department. The coverings did indeed remain in place better as a result of this.They clean up in about ten seconds, which speaks to how well they function. Peel off, use a microfiber cloth to clean both sides, and then replace. Repeat. This is a vast improvement over cleaning the air filter material with a standard sponge. Additionally, because it's on the outside of the case, you can easily and quickly access it when you need to clean it.Since the fan mounting screws will prevent the dust cover from being "straight," it only receives 4 instead of 5 stars. The product would be ideal if the manufacturer or reseller added notches to compensate for the screws. Even if they don't, making the notches yourself is a simple modification.
4.2/5
✅ã€Features】 Convenient magnetic frame design for easy installation, Computer fan filters can help you keep your computer and computer parts clean, reduce fan noise and prolong the life of your fan
✅ã€Use for】 for the home computer chassis fan dust, speaker speaker grilles and a variety of electrical and electronic products speakers dust protection
✅ã€Package includes】 2 x Magnetic Dust Filters, and Any problem with our products, please feel free to contact us! We will get back to you whenever you have a question.
✅ã€Dust filter Dimension】280mm x 140mm/11.02" x 5.51"(L x W), filters are strong enough and easy installation, Sufficient quantity for daily cleaning and replacement
✅ã€Design】dust filter fan filter has ultra fine holes, protect you computer from overheating and minimize the noise
$234
Two fans are used as the main intake on a bespoke computer. I have the magnetic dust filters on top of the computer. The filters are squares with rounded corners, thus the screws holding the cooling fans in place caused all four corners to tilt up. To avoid the screws, the filter would have to be skewed roughly 10 degrees. I was able to cut out slots for the fan screws because the material is comparable to the magnetic backing sheets you can purchase in the craft department. The coverings did indeed remain in place better as a result of this.They clean up in about ten seconds, which speaks to how well they function. Peel off, use a microfiber cloth to clean both sides, and then replace. Repeat. This is a vast improvement over cleaning the air filter material with a standard sponge. Additionally, because it's on the outside of the case, you can easily and quickly access it when you need to clean it.Since the fan mounting screws will prevent the dust cover from being "straight," it only receives 4 instead of 5 stars. The product would be ideal if the manufacturer or reseller added notches to compensate for the screws. Even if they don't, making the notches yourself is a simple modification.
4.1/5
✅ã€Dust filter Dimension】140 x 140mm/5.51 x 5.51"(L x W), filters are strong enough and easy installation, Sufficient quantity for daily cleaning and replacement
✅ã€Use for】 for the home computer chassis fan dust, speaker speaker grilles and a variety of electrical and electronic products speakers dust protection
✅ã€Features】 Convenient magnetic frame design for easy installation, Computer fan filters can help you keep your computer and computer parts clean, reduce fan noise and prolong the life of your fan
✅ã€Design】dust filter fan filter has ultra fine holes, protect you computer from overheating and minimize the noise
✅ã€Package includes】 4 x Magnetic Dust Filters, and Any problem with our products, please feel free to contact us! We will get back to you whenever you have a question.
$234
Two fans are used as the main intake on a bespoke computer. I have the magnetic dust filters on top of the computer. The filters are squares with rounded corners, thus the screws holding the cooling fans in place caused all four corners to tilt up. To avoid the screws, the filter would have to be skewed roughly 10 degrees. I was able to cut out slots for the fan screws because the material is comparable to the magnetic backing sheets you can purchase in the craft department. The coverings did indeed remain in place better as a result of this.They clean up in about ten seconds, which speaks to how well they function. Peel off, use a microfiber cloth to clean both sides, and then replace. Repeat. This is a vast improvement over cleaning the air filter material with a standard sponge. Additionally, because it's on the outside of the case, you can easily and quickly access it when you need to clean it.Since the fan mounting screws will prevent the dust cover from being "straight," it only receives 4 instead of 5 stars. The product would be ideal if the manufacturer or reseller added notches to compensate for the screws. Even if they don't, making the notches yourself is a simple modification.
There are a few ways to tell if your PC fans are intake or exhaust. The most common way is to look at the fan blades. If the blades are pointing towards the front of the case, they are intake. If the blades are pointing towards the back of the case, they are exhaust. You can also tell by the airflow direction. If the airflow is coming in from the front and going out the back, the fans are intake. If the airflow is coming in from the back and going out the front, the fans are exhaust.
To clean a tower fan without opening it, you will need to use a vacuum cleaner with a brush attachment. First, remove the dust cover from the fan. Next, use the brush attachment to vacuum the blades of the fan. Be sure to vacuum the inside and outside of the blades. Finally, use a damp cloth to wipe down the body of the fan.
To remove a fan grill, first locate the screws or clips that hold it in place. Once these are removed, the grill should come off easily. If it is difficult to remove, check for additional screws or clips that may be hidden.
Most shrouds are designed to fit a fan that is six inches from the face of the shroud to the back of the motor. This is the most efficient way to operate the fan, as it allows for the most airflow through the shroud.
A PC should have at least two exhaust fans: one at the front and one at the back.
There isn't a definitive answer to this question as it depends on the specific needs of your home or office. However, in general, it is better to have more intake fans than exhaust fans. Intake fans bring fresh air into the space, while exhaust fans remove stale air. Having more intake fans helps to ensure that the space is well-ventilated and that there is a consistent flow of fresh air.
COPYRIGHT © 2019
