If you live in an area where the water freezes over during winter, you'll need to remove your dock and store it on land. But if you live in a place where the water doesn't freeze, you can leave your dock in the water year-round.
While some home buyers might not see the value in a dock, others might be willing to pay more for a home that has a dock already built. Docks can provide a place to tie up a boat, fish, or simply enjoy the view of the water. If your home is located on a lake or river, a dock could be a valuable addition.
Docks are often made of wood, and wood is a material that is resistant to rot. There are a few reasons for this. First, wood is a naturally occurring material that has evolved over time to resist decay. Second, docks are typically built using pressure-treated lumber, which has been treated with chemicals that further resist rot. Finally, docks are often built with a water-resistant coating or sealant, which helps to keep moisture from seeping into the wood and causing rot.
The best way to protect your boat from salt water is to rinse it with fresh water after every use. You can also cover it with a tarp when it’s not in use. If you live in a saltwater environment, you should also have your boat professionally cleaned and waxed regularly.
4.5/5
EASY TO INSTALL: Simply uncoil, easily cut to size with a handsaw, and anchor to dock or pier – EasyFlex Galvanized Deck and Dock Screws are recommended for installation and sold separately
DURABLE: Effective boat and dock protection when used in both fresh and saltwater, both above and below waterline
NO COLOR TRANSFER: Made with pigmented plastic, this rub rail has no “skin coat†on the top surface – meaning no scuffing on your boat, or showing a different base color after being rubbed
D-PROFILE DOCK EDGING: Single cavity D-shape design has a flexible core to prevent boats from hitting sharp corners and dock edges, ideal for vertical dock pylons and horizontal beams
INCLUDES: 16 foot roll of white dock edging, made with recycled flexible PVC
$234
For dock edging, I initially bought the "P" profile. I desired the "D" shape for my circular pier pilings, which have a 10" diameter.The "D" profile I received worked perfectly. simple to cut (I used a cordless sabre saw with medium blade). Nicely flattened in the sun. stainless steel #10 x 1-1/2 pilings were used for attachment "Easily driven pan-head screws and washers with a cordless drill driver. Instead of using the traditional sections of flattened fire hose, this should have been done years ago.
4.3/5
EasyFlex 16 ft. "P" profile Marine Dock Edging protects docks and boats from damaging impact.
Colored black through entire thickness unlike competitive products that "skin coat" the top surface
Arrives coiled in box, easy to transport and handle. Simply remove, uncoil, fit to size for install area and anchor to dock or pier
Commercial grade heavy duty double cavity p-shape design Intended for installation on horizontal dock surfaces
Easy to cut with handsaw, EasyFlex galvanized deck screws sold separately, item # 1960-100-11
$234
Product is excellent and exactly what I expected. Unfortunately, installation is challenging and the fit and finish are subpar due to the roll-up package. The thick, sturdy material has reformed to a tight radius around two-thirds to three-fourths of the way down the roll, making it quite challenging to deal with and install. If you can get it straight enough to anchor, the upper edge will still have ripples, which are really unpleasant. I can't speak for the long-term finish, but I doubt it will be smooth enough for, say, a few weeks' worth of home showings (this instance). I hope this is at least somewhat useful.
4.2/5
Piling caps are an excellent and inexpensive way to protect costly pilings from internal rot.
NOTE: Contact us if you are unsure how to measure cones. The last image shows you how to measure the pilings for proper fitment. OR Download and Use this Char from amazon here https://images-na.ssl-images-amazon.com/images/I/61pvP9Kud0L.pdf
Available Sizes: 6 in, 7 in, 7.5 in, 8 in, 8.5 in, 9 in, 9.5 in, 10 in, 10.5 in, 11 in, 12 in
The size and color you selected above is what you will receive. Please make sure to measure the top of your piling.
$234
Excellent item at a reasonable cost. Installing stainless steel screws over the old copper piling caps is very simple. Even in the saltwater environment of a seaside area, heavy duty material should persist for years.They even left the seller sooner than anticipated.I'd make another purchase from this seller.
4.1/5
The size and color you selected above is what you will receive. Please make sure to measure the top of your piling.
Available Sizes: 6 in, 7 in, 7.5 in, 8 in, 8.5 in, 9 in, 9.5 in, 10 in, 10.5 in, 11 in, 11.5 in, 12 in, 13 in
Protects your pilings from splintering, weathering and damage Gives pilings a finished appearance
Color: Black or White
NOTE: Contact us if you are unsure how to measure cones. The last image shows you how to measure the pilings for proper fitment. OR Download and Use this Char from amazon here https://images-na.ssl-images-amazon.com/images/I/61pvP9Kud0L.pdf
$234
I initially created a layout of our pilings, measured each one (be sure to measure them multiple times because they are not exactly round! ), and noted which one was which size. The sizes were generally available (there wasn't a 7 1/2, so I got one 8-inch). When they first arrived, the package was incredibly little. I later discovered that they had been nested for smaller shipping; wonderful! But at that point, I was unsure which was which. There is a little, white, embossed number of the same size on the plastic on the inside, so don't worry. Oh, that was helpful! They pretty much fit our specs; for example, if the piling was 8", I would have purchased an 8" cap.) My spouse occasionally needed to "shave" pieces off with a jigsaw to make it fit. I believe we could have done better with our measurements (ergo the advice to measure in more than one spot). Because it made screwing in simpler, we predrilled. Three stainless screws each were used by us. Because it is a little difficult to take them off after they are on, be sure you are putting them on "square." We adore how perfectly they fit; there are no noticeable holes at the bottom. Nicely done. Though we don't anticipate having to, we would buy again. Only one of the forty or so items we purchased had a top hole that had popped open. With some white caulk we had sitting around, we backfilled it. Not to worry.
4.1/5
Lifetime no-hassle warranty
Protects  against abrasive sand, rocks, concrete ramps and oyster beds and eliminate costly repairs
Keel Guard prevents wear and damage to your boat's keel which can break down its protective gel coat finish
Do-it-yourself application installs easily in an hour or less; Application kit comes with patented burnishing tool which insures professional results
Enjoy the highest quality and superior engineering - every aspect of Mega ware Keel Guard has been designed with boat designers & 3M engineers
$234
If put on a deck boat, there is no warranty! If installed correctly, there is no need for a guarantee. We frequently pull our boat up on the shore in the channel at Havasu, where there are small rocks and sand, and these guards have been working great for the past three years. Once more, careful installation is required; a good installation depends on preparation. It is quite challenging to uninstall once put properly. Do not shortchange the length; you will regret it. Due to inadequate planning or ordering, some of our friends attempted to put these on their deck boats without success. The cost of the guards is not even close to what it would be to have the boat's bottom fixed to prevent continuous shore landing.
4.1/5
Heavy-duty hot-dipped galvanized hardware mounts securely to the dock
Feature molded-in valves to adjust the level of firmness
Brackets and wheels are not interchangeable
3 year warranty, Made in the USA
Smooth rolling wheels offer substantial dock cushioning
12" and 18" wheels use a large 2" diameter axle housing for maximum strength
$234
My 41 foot Hunter yacht was just relocated to a new concrete marina pier with wooden sides and edges. Despite the fact that I only have a single 50-foot slip, there are days when the wind is strong enough to swing the boat as I am backing it in. The docking wheels are a big assistance in "rolling" the boat into the slip so that it may be secured by lines because they are strong and large enough to take the tension when pressed against. They required no modifications because they were simple to mount and came with plate, drill holes, and big bolts. The typical rubber edge pads on my previous slide ultimately always broke loose or started to pull away. This system is considerably superior.
3.9/5
DIY easy application
Bends to conform to your hull
Anti-corrosive 22-gauge 304 stainles steel construction
Protects your boat from scuffs and abrasion caused by trailer rollers
Mirror polished finish
$234
I was sick of the rollers' run markings on my 21-foot Crownline Boat. If you follow the instructions, it fits and looks fantastic. On Amazon, the price is likewise very favorable. Simply take your time and mark the top spot where you want it. The fiberglass there should then be cleaned. Because acetone dries quickly, I used it. Before you peel the 3M tape off, shape it in the desired location, bend it in the middle, tighten the sides, and attempt to make it as tight as you can. After that, I positioned it from the top, then the sides. To ensure that it was tight, I pushed in every possible spot. then struck the outer edges with a plastic hammer. It works, is made of stainless steel, and looks fantastic!
3.6/5
Rolls with impact to fend off boat
Inflatable Corner Mount Dock Wheel boat fender
Extra heavy galvanized Bracket with predrilled holes
$234
I have purchased a boat dock wheel before. The marina where I am has floating docks. These dock wheels perform a superb job of protecting the side of the boat because there are no pilings to swing around and because their height exactly matches the height of the porthole in the back cabin. These are unquestionably a good choice for anyone using a floating dock.
If you have a dock, you probably want to protect it. Here are a few ways you can do that: 1. Use a dock cover. This will help protect your dock from the elements and from debris. 2. Use dock lights. This will help you see your dock at night and will also deter criminals. 3. Use a dock alarm. This will notify you if someone is trying to access your dock. 4. Use a security camera. This will allow you to monitor your dock and see who is coming and going. 5
If your boat has a tendency to hit the dock when you're tying up, there are a few things you can do to prevent it. First, make sure you're using the proper lines for your dock and your boat. Second, be sure to tie your boat off in a way that will keep it from hitting the dock if it does happen to swing. And lastly, be sure to keep an eye on the wind and the waves so that you can anticipate when your boat might start to swing and take corrective action accordingly. By following these tips, you can help keep your boat safe
Dock bumpers should be placed as close to the edge of the dock as possible. This allows the boat to come in contact with the dock bumper, rather than the dock itself.
Fiberglass boats are extremely durable and can withstand being in salt water for extended periods of time. However, it is important to properly maintain your boat to ensure that it remains in good condition. Regularly washing and waxing your boat will help to protect it from the elements and keep it looking its best.
If you are wondering how many dock bumpers you need, the answer may depend on a few factors. The size and weight of your boat, the frequency of use, and the environment where you keep your boat docked are all important considerations. In general, it is a good idea to have at least two dock bumpers, one on each side of your boat. This will provide some protection in case your boat should happen to drift or be pulled by a strong current.
Dock lines should be tight enough to keep your boat from moving, but loose enough to allow for some movement. This will help protect your boat and dock from damage.
COPYRIGHT © 2019