LED load resistors are used to safely dissipate the excess current created by the LED bulbs. The heat that is generated by the resistors is dissipated by the surrounding air, making them safe to use.
Load resistors are used in LED applications where the LED is supplied with too much voltage. The load resistor ensures that the LED does not burn out by dissipating the excess voltage as heat.
No, you do not need a load equalizer for LED lights.
An LED license plate light does not need a resistor.
5/5
Can be installed as license plate lights, step courtesy lights, dome/cargo lights, under hood lights
Great for trucks, SUV, trailers, vans, off-road vehicles as additional add-on lamp
Easy to install, direct bolt-on, shock resistant
long life span and low power consumption roll pan license plate light
Super bright LED provide maximum visibility and safety
$234
I can't express how pleased I am with the goods and customer service.The light was for my truck's license plate light. The installation was simple, and the lovely white light is really bright.I even received a third one!Due to my own foolishness, there was a mix-up, and let me just say that the customer service abilities were unmatched. They were AMAZING!Once again, many thanks to everyone.Exceptionally happy customer!
4.5/5
ALUMINIUM LIGHT HOLDER: Our License Tag Light Use Aluminium Light Holder, Which Finished with Thick Black Spray. Round, Cute and also Rust Free.
HIGH QUALITY DIODE: Each of the License Plate Light Equiped with 1 Piece 12V Bright Enough 5050-SMD Three-core White Lamp (Cool Tone, Maybe Someone Thinks It is A Little Blue). Long Lifespan and Low Consumption.
EASY TO INSTALL AND EXTENSIVE FITMENT TYPE: Direct Replace the Number Plate Screw Bolt, and Simply Bolt-on, Tight and Shock-proof. Legal Assistance for Passing the Inspection of Cars, Motorcycles, Trucks, RVs, ATV, Bike
CLIENT SUPPORT: Please Feel Free to Contact Us at First If There is Any Problem When You Receive or Use Our Products. We are Always Here to Support You.
RAINPROOF DESIGN: Waterproofing Process are Employed to the Diodes, the Connection between the Screw Bolt and Wire. This Design can Protect the Light from Rain.
$234
Although I adore the brightness and the way they mounted for the license plate, there is a problem. One drawback could prevent me from using this again.When integrating this into an existing wiring harness, the wires are SMALL and prone to breaking. The wires were too small to splice with a wire clamp on, which caused me a lot of trouble. squeaked past the gap without making contact, the insulation would not be severed, and it would not create connection. I was unable to utilize one that was very small because the current wiring was 16ga. These are closer to 26 or 24 gauge! maybe smaller. The wires did break twice while I was simply tape the connection, thus I had to splice them in the difficult method and solder to maintain a strong connection. managed by first carefully zip-tying the wires beneath the plate and then using heat shrink tubing.Even after two months, they are still employed. They appear nice on the plate of my 2007 Gold Wing Trike and are quite brilliant. (Instead of holding on to the plate, they were actually fastened to the brackets holding the lights just away from it. Since you would have to cut the cables to remove or replace the plate, mounting these to a plate seemed sort of foolish.)I would rate it 5 stars if the wire was at least a strong 18 gauge. Even more would be my price for better wiring. But the LEDs are very attractive.
4.5/5
LAW COMPLIANT - This license plate LED is DOT FMVSS-108 certified making it safe under the confines of the set laws.
DURABLE NAD RELIABLE - By using high-quality components for this license plate light, you get a reliable which is both durable and reliable. You also get a two-year warranty.
WATER SEALED - In addition to being sturdily built, this light also has an IPX7 waterproof certification making it resistant to water damage.
SOLID BUILD QUALITY - Made from unbreakable polycarbonate material and rust-resistant steel making this license plate durable and reliable.
MULTI-PURPOSE - With its unique shape, sturdy construction and water-proofing, this LED light is not only suitable as a license plate light but also for various automotive purposes, especially marine applications.
$234
My trash trailer's license plate was covered by this tiny light. Since I don't intend to haul the trailer in the dark, I simply used one of the two in the box. Applying it to the trailer was easy. The wiring was rather simple. I connected the red wire to the tail light cable, and I screwed a self-tapping screw into the frame to secure the other wire. Although it was simple to fix, the wire leads may have been a little bit longer. Because the plate would flex if it were to be tilted, it was set separate from the tail light. That is more of a recommendation than a true complaint, should the need arise. Heat shrink can be useful. Which of the two wires was hot and which was ground was not specified in the accompanying instructions. Perhaps they wanted to avoid using more ink than was necessary.
4.3/5
Tips: 10 packs of 194 led bulbs of one set. for some vehicles, It may need a canbus decoder to fix flickering or error code
Better beam pattern: each bulb has 5 pcs high power SMD led. color temperature: 6000K(xenon white, with a hint of blue), voltage: 12V
No polarity no flip: it is truly no polarity, can light on two sides, no need more modification or flip. play and plug, easy install within 5 mins
Fit bulb size: T10, 147, 152, 158, 159, 161, 168, 175, 184, 192, 193, 194 2825 W5W. 194 LED bulb can fit map light, dome light, license plate light, trunk light, courtesy light
Notice: 194 led bulbs could fit most of positions of car. do not fit all positions of your car. according to the year and model of your car. please double check owner's manual. for 12V vehicle
$234
I finally found a pair of bulbs that match both our Honda 2013 CRV and 2018 Pilot after having a bad experience with another brand, and wow am I pleased I replaced the factory bulbs. The bulbs are BRIGHTER than the stock bulbs that came with the car, as previous reviews have demonstrated. With the dome lights, I can see things at night much more clearly without having to hold items right up to my face.Since I only replaced the bulbs a week ago, I cannot vouch to their durability, but I am confident that they will outlast the factory incandescent bulbs that came with the automobiles.I have no problem recommending these lights to those who want their automobiles to be more well-lit.
4.3/5
[Purchase with Confidence] - Limited Lifetime Warranty to Ensure 100% Satisfaction
[SAE & DOT Approved] - 100% Street Legal. Meet All Regulations In USA & Canada.
[Direct-Fit Replacement] - Identical to OEM Specification. No Modification or Trimming Needed.
[10X Brighter Than OEM Light Bulbs] - Built-In High Power SMD LED Chips to Maximize Rear End Illumination
[Fully Plug & Play] - Simply Remove Original T10 Bulbs & Connect The Plug. Done.
$234
On my 2005 GMC Sierra 2500HD, it was installed. I included a before-and-after photo. The deal for those was terrible, so water would get in and destroy the lights. I used to just run led bulbs in the housing. Enter this product as I was struggling with that. What a wonderful notion. The lamps are well-made. The lighting is quite pleasant and bright. makes my truck look fantastic. I adore how the light and housing blend seamlessly. really simple to install Simply remove the old housings, then grab the wire that once held the bulb, and connect the light to it. Easy as plugging in and playing. Once they are plugged in, simply insert the light into the bumper cutout.
4.2/5
[Load Resistors Included] - No Hyperflash or Error Code On Dashboard After Installation
[Cool Smoked Lens] - Intended For Car Show or Off-Road Use Only
[Purchase with Confidence] - Limited Lifetime Warranty to Ensure 100% Satisfaction
[2X Brighter Than OEM Light Bulbs] - Built-In High Power SMD LED Chips to Maximize Rear End Illumination
[Fully Plug & Play] - Simply Remove Original T10 Bulbs & Connect The Plug. Done.
$234
The lighting is excellent. In order to comprehend how the retaining clips function, I shattered one original. I can see why they don't describe it in the instructions because it's difficult to explain, but they could still include graphics to demonstrate how the clips function. It is actually brighter to use LED lights in the original casing. The LED board looks excellent, and the finish is black. My old housing was having condensation inside, so I switched. I'm satisfied with the buy overall.
4/5
[Purchase with Confidence] - Limited Lifetime Warranty to Ensure 100% Satisfaction
[10X Brighter Than OEM Light Bulbs] - Built-In High Power SMD LED Chips to Maximize Rear End Illumination
[Direct-Fit Replacement] - Identical to OEM Specification. No Modification or Trimming Needed.
[SAE & DOT Approved] - 100% Street Legal. Meet All Regulations In USA & Canada.
[Fully Plug & Play] - Simply Remove Original T10 Bulbs & Connect The Plug. Done.
$234
Installing was easy. Remove the old ones, disconnect the new ones, connect them, and then replace them. Since they only connect via the wiring, I had trouble making sure one was properly installed, and I'm unsure of how they will fare in inclement weather. Nevertheless, as long as it doesn't rattle free, it might be okay because the region under the bumper doesn't actually get wet or full of road debris.The LEDs are brilliant, but it would be wonderful if they were pointed in a specific direction, like the license plate. With the license lights on, the camera positioned on the tailgate is practically useless, so I'm planning to create a baffle in 3D to mount above the lamps to block the upward-pointing light.Giving five stars overall. They are effective, shine brilliantly, and should be perfect provided there is no physical wire corrosion or vibrating loose.
4/5
Better beam pattern: each bulb has 5 pcs high power SMD LED. color temperature: 6000K, xenon white, witha hint of blue, voltage: 12V DC
No polarity: it is truly no polarity, can light on two sides, no need more modification or flip. play and plug, easy install within 5 mins.
Fit bulb size: T10, 147, 152, 158, 159, 161, 168, 175, 184, 192, 193, 194 2825 W5W. 194 LED bulb can fit map light, dome light, license plate light, trunk light, courtesy light, etc
Notes: 194 led bulbs could fit most of positions of car. do not fit all positions. It's according to the year and model of your car. please double check owner's manual. for 12v vehicle
Tips: 10 pack of 194 led bulbs of one set. for some vehicles, it may need a canbus decoder to fix flickering or error code
$234
The lights arrived on time and were installed correctly. I appreciate the crisp white colour they have.To replace a burned-out running light, I purchased these. The lights functioned flawlessly. The daytime light system, however, kept displaying a malfunction on the car's computer. I assume this was brought on by the LED bulbs' relatively low power drain when compared to the incandescent OEM bulbs.For the running lights, I switched back to incandescent bulbs, and I'll use these for interior or tag lights as well. Therefore, this product has not been downgraded; rather, it is simply something to be aware of if you are replacing OEM incandescent running lights.
4/5
Better beam pattern: each bulb has 5 pcs high power SMD LED. color temperature: 6000K, xenon white, witha hint of blue, voltage: 12V DC
No polarity: it is truly no polarity, can light on two sides, no need more modification or flip. play and plug, easy install within 5 mins.
Fit bulb size: T10, 147, 152, 158, 159, 161, 168, 175, 184, 192, 193, 194 2825 W5W. 194 LED bulb can fit map light, dome light, license plate light, trunk light, courtesy light, etc
Notes: 194 led bulbs could fit most of positions of car. do not fit all positions. It's according to the year and model of your car. please double check owner's manual. for 12v vehicle
Tips: 10 pack of 194 led bulbs of one set. for some vehicles, it may need a canbus decoder to fix flickering or error code
$234
My 1988 Chevy Suburban's instrument cluster now looks fantastic after I used these to replace the lights there. It turns out that they also function for the marker lights. In terms of appearance, it had no effect on the rear, but the front markers look nice. Since they are no longer truly amber, they are probably illegal, but they still look cool.Install is a drawback. It's difficult to remove the cluster, so you should take care. According to several films I subsequently saw on YouTube, breaking one of the mounting tabs is usual (I did it), but it's not a major concern. In hindsight, I should not have done this because I could hardly see my speedometer and had only one functional light in my dash. For the cool aspect alone, it would be worthwhile. Make sure the dimmer is turned up because they don't have the same voltage range as the old bulbs. When I struggled with the bezel, I ultimately turned it down, and at first they didn't light up. It took me around 20 minutes to figure it out (and some artistic cursing).
3.7/5
Street Legal Xenon White LED Light
Universal Fit for any 12V cars, trucks, trailers, & RV's
Equips with 12 pieces super bright LED lights for maximum illumination
Very simply 2 wires hook-up installation
Dimension: 7.75 (L) x 1.00 (D) x 0.75 (H) inches
$234
This is not frequently used. My truck is equipped with a mule kit so I can pull it behind the RV. Only when my truck is connected to the RV lighting is this in use. Was a fantastic option for anyone trying to illuminate their license plate without using their OEM wiring. I installed one on my friend's truck as well, except mine has a pair of side lights that illuminate the license plate while his lights are directed downward toward the plate. We simply tightened the bottom two plate bolts that were shining, and it is still operational. When it rains, a little water even collects on it.
If your license plate light assembly needs to be changed, you can follow these steps. First, remove the old license plate light assembly by unscrewing the two screws that hold it in place. Next, take the new license plate light assembly and screw it in place. Finally, connect the wiring to the new license plate light assembly.
To fix a license plate light, you will need a screwdriver, a replacement light bulb, and a wire brush. Begin by unscrewing the light fixture from the license plate. Once the fixture is removed, use the wire brush to clean the area around the light bulb. Next, remove the light bulb from the fixture and replace it with a new one. Finally, screw the light fixture back into place.
To replace a trailer's license plate light, first remove the old light by unscrewing it from the trailer. Next, insert the new light in its place and screw it in. Finally, connect the new light's wire to the trailer's electrical system.
If your number plate light is out, it is illegal to drive. The number plate light is there for a reason - to help other drivers see your number plate at night. If it's not working, you could be fined.
There are a few different options for what you can use for a tag light. You can either use a standard light bulb, an LED light, or a solar-powered light. Each option has its own set of pros and cons that you will need to consider before making your final decision.
There is no fuse for the license plate lights. The bulbs are powered by the taillight circuit.
COPYRIGHT © 2019