Best Stage & Studio Patch Cables in 2022

Last update: November 12, 2022

Are patch cables and speaker cables the same?

No, patch cables and speaker cables are not the same. Patch cables are typically used for connecting electronic devices, such as pedals, to one another, while speaker cables are used for connecting amplifiers to speakers. Both types of cables are made with different gauge wires and have different connector types.

Are patch cables the same as aux?

No, patch cables and aux cables are not the same. Patch cables are typically used to connect two pieces of electronic equipment, like a guitar and an amplifier, while aux cables are used to connect a portable audio device, like a phone or MP3 player, to a speaker.

Can you use a speaker cable as a patch cable?

You can use a speaker cable as a patch cable, but it's not the best option. Speaker cables are designed for connecting speakers to amplifiers, and they're not as flexible as patch cables. Patch cables are typically made of shielded, twisted-pair cable, which helps reduce interference.

Can you use an AUX cord as a patch cable?

If you have an AUX cord and a stereo patch cable, you can absolutely use the AUX cord as a patch cable. All you need to do is connect the two cables together, and you're good to go. The only thing to keep in mind is that AUX cords are typically not as durable as patch cables, so you may need to replace them more often.

Kirlin Cable AP-403PR-06/BK - 6 Feet - Dual RCA to Dual 1/4-Inch Patch Cable Review:

I got this connection so I could digitize LPs and cassettes using my Tascam DR40 digital recorder and my old Pioneer amplifier's tape output. You can't go wrong with this cable if you need a customized one like this. It has strong, incredibly flexible wire and insulation, is quite sturdy, and has painted metal ends with snugly fitting RCA and 1/4 connectors "plugs. Given that they didn't have many reviews, I gambled on them, but I wasn't let down at all. I actually purchased their 6 foot 1/8 in. cable since I was so delighted with it "Since they were produced to the same standards as this one, I also purchased a stereo to dual RCA cable ( and was equally pleased. I would buy them right away if they included dual RCA to dual RCA cords.

Hosa CMM-830 3.5 mm TS to 3.5 mm TS Unbalanced Patch Cables, 1 Foot Review:

Amazing stuff. These cables include strain relief integrated into the molded connectors. They are nicely flexible and neither too thick nor too thin. They perform admirably inside the framework of my Eurorack patching. I anticipate hearing from them in the coming years.

DuKabel TopSeries Long 6.35mm (1/4 inch) to 3.5mm (1/8 inch) Headphone Jack Adapter -8ft (2.4m) 1/8 Female to 1/4 Male Extension Cable 3.5 to 6.35 for Mixer Guitar Piano Amplifier Speaker and More Review:

In order to avoid having to push or pull jacks out of my tiny headphone amplifiers, which use 1/4 headphone output jacks, I use the short 1-foot version of the 1/4 male to 1/8 female wire. When huge 1/4 headphone jacks are installed, the portable headphone amplifiers roll around on the table.This well-made cable fulfills the requirement perfectly. The cable is well-made, and the exterior is braided heavily. When you insert a headphone jack of the same size into the 1/8 female jack on this cable, it makes a satisfying, strong "click." On the connectors, both cable ends have a rather thick metal jacket. The only improvement I would make to this cable is to extend and improve the rubber stress relief where it reaches the metal connectors. Apart from that, this cable is excellent and a great value.

On-Stage Hot Wires Straight 1/4" TRS Patch Cables, 17" (8 Pack) Review:

fantastic stuff These are a regular feature of my recording studio that I use. The value is excellent compared to the price. I'm reconsidering ever again purchasing cords from Sam Ash or Guitar Center. All of my future recording studio wire needs will be met by Amazon! Bravo, Amazon!

GLS Audio 25ft Patch Cable Cord - 1/4" TRS to 1/4" TRS Black Cable - 25' Balanced Snake Cord Review:

This cable is fantastic; I bought it to connect my recording interface's stereo output to my Roland v-drums. The 25-foot reach is excellent since it offers me plenty of room to maneuver and allows me to maintain some separation between the set and the recording station. Because of the price, you might be hesitant to buy this cable, but don't worry; it's a high-quality cable. The staff at GLS Audio/Orange County Speaker is also very welcoming. I had no issues with my order, however they got in touch with me to express their gratitude. One of the best ways to gain my return business is through excellent customer service, and this purchase has been no exception. The next time I need wires, GLS Audio will be my first port of call. Regards, gentlemen!

GLS Audio 3-Feet Patch Cable Cords - Dual RCA To Dual 1/4" TS Black Cables - 3ft Cord - SINGLE Review:

In my home studio, I had a Tascam US-2x2 audio interface that I needed to connect to a pair of M-Audio monitors. Where I reside, it's difficult to find the cable needed to connect the Tascam's TRS mains to the speakers' RCA sockets. I decided to buy the GLS Audio 3-Feet Dual RCA To Dual 1/4" TS Patch Cable as a result. The cable functions well and seems to be built of high-quality materials. I doubt I'll ever consider this piece of equipment again, but you need it when you need it!

Donner 6 Inch Patch Black 6-Pack Guitar Effect Pedal Cables Review:

After briefly utilizing straight pedal couplers, I made the decision to switch to these patch cables, and they are excellent. Due to my flexibility, I can space out my pedals without experiencing the problem I encountered with straight pedal couplers.I'm not sure if this applies to all or just some effects pedals, but I had a problem with straight pedal couplers making my pedals wobble and not sit level on the floor. In case anyone is curious, I use a Boss pedal setup. For me, using patch cables was the solution to this issue.

Donner 6" Patch Black 3 Pack Guitar Effect Pedal Cables Review:

Regarding cables, not much can be said. Either they are of low quality or high quality. I'm a bassist. Only have the tuner, EHX battalion, and noise gate pedals. They are of nice strong construction and function great. They've also been used by me to link pedals to a tiny portable recorder. I've experienced no problems.

90 Degree Right Angle Aux Cable - [24K Gold-plated,Sound Quality]EMK Audio Stereo Male to Male Cable for Laptop, Tablets, MP3 players,Car/Home Aux Stereo, Speaker or More (4Ft/1.2Meters) Review:

I have experience in engineering, thus I value high-quality audio goods. As a result, I now turn to EMK whenever I want high-quality products. This 8-ft. 90° right-angle cable is just as strong and durable as cables that cost seven times as much to buy previously.The appealing blue and gold braided exterior serves as vital protection from kinking, snagging, and other assaults or damage from everyday use. Although it has a wider diameter and is stiffer than many other cables, this is a modest price to pay for the superior quality.Each terminal end is protected by a sturdy, satin powder blue-finished anodized aluminium casing. The wire end and the 3.5mm jacks are less stressed because of the sturdy gold finish on the jacks and the practical 90-degree bend, which has a hefty no-holds-barred block. Since I've had cables separate in the past owing to stress at either the point of transition from the cable flex or at the actual 3.5 mm connector, this attention to detail is very appreciated.By integrating firm stepped rubber boots where the cable enters the metal housing of the terminal ends, EMK has decreased the danger of cable flex damage. At this point, I've lost too many cables due to flexing and bending wires. With this EMK cable, there hasn't been a problem with this.Given the aforementioned benefits, I wholeheartedly endorse this EMK 90 degree right angle cable.

Does patch cable length matter?

No, patch cable length does not matter. The only time length matters is when you are making a very long run, and even then it is only the capacitance of the cable that becomes an issue.

How do I choose a patch cable?

One important factor in choosing a patch cable is the length. You'll want to make sure the cable is long enough to reach from your pedalboard to your amplifier, but not so long that it's cumbersome. Another factor to consider is the gauge, or thickness, of the cable. A thicker cable will be less likely to break or kink, but it will also be more difficult to route through your pedalboard. Once you've decided on the length and gauge, you'll need to choose a connector type. The most common type of connector for patch cables is the 1

How do you calculate cable size?

The size of a cable is determined by its cross sectional area. This is usually expressed in mm². To calculate the cross sectional area, multiply the width and height of the cable.

Is it better to solder or crimp speaker wires?

There is no definitive answer to this question as it depends on the application. For example, soldering is generally considered to provide a more secure connection, but it is also more permanent. Crimping, on the other hand, is less secure but can be easily undone if necessary. Ultimately, it is up to the individual to decide which method is best for their needs.

What are the 3 main connector types of audio?

There are three main types of audio connectors: coaxial, optical, and analog. Coaxial and optical connectors are used for digital audio signals, while analog connectors are used for analog audio signals.

What are the 3 main types of cable wire that we use?

The three main types of cable wire that we use are coaxial, twisted pair, and fiber optic. Coaxial cable consists of a central conductor surrounded by an insulating layer and a shielding layer. Twisted pair cable consists of two insulated wires that are twisted together. Fiber optic cable consists of a glass or plastic core surrounded by an insulation layer.