Best Power Pinners in 2022

Last update: December 18, 2022

Can I use 18 gauge nails for baseboard?

If you're looking to install baseboard, you might be wondering if you can use 18 gauge nails. The answer is yes, you can use 18 gauge nails for baseboard. However, it's important to keep in mind that 18 gauge nails are thinner and therefore not as strong as 16 or 17 gauge nails. This means that they're more likely to bend or break when you're driving them into the wood. As a result, you might want to use a few more nails when you're installing baseboard with 18 gauge nails.

Can I use a pin nailer for shoe molding?

Can I use a pin nailer for trim?

A pin nailer is a tool that is used to drive small nails into wood. It is a very useful tool for trim work because it allows you to get a tight fit without the nails showing. You can use a pin nailer for any type of trim work, including baseboards, crown molding, and door trim.

Can you use a 18 gauge brad nailer for crown molding?

Installing crown molding can add an elegant touch to any room in your home. While many people think that only a professional can install crown molding, it is actually a fairly easy do-it-yourself project. The key to a successful installation is to use the right tools. A brad nailer is an essential tool for installing crown molding. A brad nailer is a type of nail gun that uses small nails, called brads. Brad nailers are very versatile and can be used for a variety of tasks, including installing crown molding.

BOSTITCH HP118K 23-Gauge 1/2-Inch to 1-3/16-Inch Pin Nailer Review:

After researching reviews for this gun and the more expensive ones for an excessive amount of time, I came to the conclusion that this would work just fine for the little amount of use I would give it. It has served me perfectly thus far. As long as the pressure is set correctly, it countersinks without any issues. The only thing I have against this pistol is that it requires extreme caution when working with soft woods because it lacks a non-marring tip. Once you get used to lightly pressing, you are safe. And to add to what has already been said, USE CAUTION WHEN USING THIS GUN. Te safety hardly qualifies as a safety. When reaching for the gun, it is relatively simple to discharge a pin off into the air.

Metabo HPT NP35A Pin Nailer, 23 Gauge, 5/8" to 1-3/8" Pin Nails, Dual Trigger, Depth Adjustment, No Mar Tip - 2, Reload Indicator, Removable Nose Plate, Large Capacity Pinner, 5 Year Warranty Review:

I bought this to complete tiny wood trim work since I dislike the larger holes my 18 gauge nailer leaves behind. When adjusting the compressor to 100 psi, as instructed in the handbook, there should be no issues. said that higher pressures would work, but that would be harder on the nailer. I quickly tested how well a piece of quarter-round trim I intended to use would hold by pinning it to a 2x4 with just two pins. Boy, was I wrong! With only two pins holding it, when I tried to remove that trim from the 2x4, it would strain and bend back, but it wouldn't budge! I completed the minor task I needed to complete, and I really had to look for the minuscule holes it left behind—which were practically invisible for the casual look. It took a little while to get used to the safety trigger, but hey, it's there for a reason, right? Finally, another tool I'm delighted I now possess.

PORTER-CABLE PIN100 1/2-Inch to 1-Inch 23-Gauge Pin Nailer Review:

Leave it to Porter Cable to design an excellent, lightweight, and manageable tool. With this nailer, I can access areas where previous, bulkier tools could not. The dual trigger may be a little challenging for some, but after a few pins, it becomes second nature. I prefer not to have the safety foot at the nose, which requires pressure and can occasionally make you miss your target. Put the nailer's nose where you want the pin to go, pull the triggers, and presto—the job is done.I bought this pin nailer to place panels beneath cabinets to complete them, and it produced excellent results with minimal stress from not receiving the results I was expecting or wrist or arm fatigue.There are two minor drawbacks: 1. I have to reduce my air line pressure from 110 to 80 when I need to use this specific item.2. You must exercise caution when holding the nailer since it is easy to accidentally depress both triggers and discharge a pin into the air.Otherwise, it is well worth the money and I would recommend it. Since it is made by Porter/Cable, like other tools I own, I am confident that it will provide me with years of solid service.

Freeman PP123 Pneumatic 23-Gauge 1" Micro Pinner Ergonomic and Lightweight Nail Gun with Safety Trigger and Pin Size Selector for Crafts, Moulding, and Picture Frames Review:

I've now bought four different freeman products. This is the first one that I really didn't need. I bought it just out of want, and I'm pleased I did. The item is well-built and simple to load and use. I've only put a few hundred pins through it, but so far there have been no issues. It can be placed precisely where you need it because it is compact and portable. I won't remark on how fantastic they are as an almost invisible fastener since the pins it fires are the same pins that every pin nailer on the market fires (I know I already said, but I couldn't help it). Some folks gripe that the tip isn't a non-marking tip. It is not possible since it would be difficult to position the pin precisely where you want it. Understanding how to use a pin nailer is the key to using one. As you would with a frame nailer, avoid jamming the tip down. Very little pressure is needed to hold the little pistol against the work area because it recoils very little. You are pressing too firmly if you are leaving a mark on your wood. About 100 pins and no jams, misfires, or other issues at all. This is an excellent tool that ought to have gotten five stars. The only Freeman tool I've bought that didn't come with a case is the reason it didn't. Even though all of them have been flimsy plastic cases that will ultimately fail, they at least serve as a means of protection and dust-free storage while they are on the shelf while I work on making proper cases for them. This is a fantastic product that won't let you down and costs less than competing brands. For those of you who are curious, the other Freeman items that I have purchased are the Freeman PMC150 1-1/2-Inch Metal Connector Nailer, Freeman PFR2190 21-Degree Full-Head Framing Nailer, and Freeman PFL618BR 3-in-1 Pneumatic Flooring Nailer. Reviews of those additional utilities will be available soon.

Hitachi NP35A Pin Nailer 23 Gauge, Accepts 5/8 to 1-3/8 Pin Nails, Micro Pinner with Depth Adjustment, 5 Year Warranty Review:

This is my first name-brand pinner because I've had way too many cheap off-brand pinners. This is because it's the first reasonably priced pinner I've discovered from a well-known company. I was previously always seeing high-quality ones for between $250 and $300, which I simply couldn't justify. Therefore, I'm thrilled that this one is only around $100. The cheapies I previously owned that cost $30 or less all broke after about 5,000 nails.Ok, now for the benefits and shortcomings of this one:Pros:1) Has a safeguard to stop unintentional "discharge." None of my previous pinners had this.2) Accepts lengthy pins. Some pinners will only take one."3) Adjusting the depth of drive4) decent warranty (I hope I never have to use it!No need to modify for fastener length.6) An Allen wrench is required to disassemble the noise and unjam any obstructions inside the tool.Cons: 1) Although my carry case is larger than others', it does have all the fasteners I require.2) It takes some getting used to safety on the trigger.3) I would prefer if the nose had a tool-free release for jamb clears.Although I've only used this tool on six projects thus far, I already adore it.

NuMax SP123 Pneumatic 23 Gauge 1" Micro Pin Nailer Ergonomic and Lightweight Pin Nail Gun with Pin Size Selector and Safety Trigger Review:

I recently bought this NuMax rifle from Amazon and used it for a short period of time. The other reviewers are right; this pinner is excellent value for the money. It lacks accessories like a built-in blower or the capacity to use longer or slightly headed nails that a more expensive pinner (such as Cadex) might have, but it still qualifies as a very decent basic nailer on its own. Additionally, the cost is between 1/8 and 1/12 less.The build quality is excellent; this tool doesn't have a plasticky feel to it. The grip of the rifle is wrapped in a material that resembles rubber, and it feels sturdy and small. Use caution while using the simple trigger safety because once it is disabled, the pistol is practically "hot" (there is no secondary safety). Many pinners may forgo a contact dual safety system to improve placement accuracy, as others have noted.The NuMax pinner performed flawlessly when in use. I've never experienced any jams. Each pin poked a hole just below the surface of the wood, hardly perceptible. It worked fantastically to keep pieces of wood together while I applied glue to them. The work pieces weren't jostled or forced out of place due to the lack of a contact safety device and the small amount of recoil experienced while fire. It just does what it's supposed to, and although though I've only used 1" pins, I anticipate that it will function just as well with shorter pins.The majority of my tools are DeWalt, Makita, Bosch, and Max, but occasionally I'll take a risk on lesser-known brands—most of them have been let down, but this NuMax pinner is a keeper!

Metabo HPT NP18DSAL 18V Cordless Pin Nailer Kit, 5/8-Inch up to 1-3/8-Inch Pin Nails, 23-Gauge, 3,000 Nails Per Charge, Compact 3.0 Ah Lithium Ion Battery, Holds 120 Nails, Lifetime Tool Warranty Review:

(Note: My kit arrived entire, unlike some other reviewers. Although some sellers may offer you a lesser price, it is recommended to buy things that are marked "Ships from and sold by Amazon."In North America, Metabo HPT replaced Hitachi Power Tools. In an effort to separate itself from the larger Hitachi firm, Hitachi purchased Metabo a few years ago. Even with this modification, the overall black and green aesthetic was kept. Additionally, as far as I can tell, the quality held steady.The Pin Nailer weighed 4.53 lbs when I had the battery in it (3.65 lbs. without). It seems substantial and heavy. It weighs significantly more than my 18-Gauge Brad Nailer and Crown Stapler, but a large part of it is due to the battery power rather than the air power. I prefer not having to carry about my air compressor and connect it to a hose. Despite the tool's weight, there are far fewer materials required overall.The Pin Nailer has a metal clip at the bottom that lets you attach a toolbelt to it. As a former deck builder, I can attest to the usefulness of this choice while moving. When working in a dim environment, the LED light is a wonderful alternative.For groove driving, there are two alternative nose caps. a default thin one and a wider one (attached at the side). At the side, you may also change how deeply the pins pierce the wood.This nailer, in contrast to some others, only releases the nail when the trigger is pulled after pressing the nose against a surface. By depressing the trigger and tapping the nose against the surface repeatedly, you cannot speed nail. Press the trigger afterward. Even though speed nailing is eliminated, if you press and pull quickly enough, it still reacts quickly.It has a lot of power for a battery. I was able to shoot into thin layers of metal, though not to the same extent as you could with an air compressor (which I did for testing purposes; you normally use this on wood). Pin nails can only be as thick as 1-3/8", so they may be driven into wood with little effort. Additionally, the battery has a decent amount of life. 500 nails were easily tested, and it hardly put a drain on it.The furniture is quite lovely. A sturdy case, battery, battery charger, and eye protection are included. But pin nails are not included. They must be ordered separately. It can handle 23-gauge 5/8", 3/4", 1", 1-3/16", and 1-3/8" diameters. In addition to 3/8 and 1/2, the Multi-Pack (ASIN: B0012BV21W) I bought included the majority of those sizes. Although the nailer's maker claims that 3/8 and 1/2 are not supported, I was able to make them function. Kind of. Because the 3/8 are so tiny, they would cluster up (become clogged) in the magazine. Although they are only somewhat smaller than the 5/8, I don't see a reason to force the 1/2 because it seemed to work better. I generally prefer to use nails that are at least one inch long.The first time I used the nailer, there was some misfiring. I initially tried 1" nails, but they did not come out. It may have been that I put them wrong, however after fiddling with the nailer for a bit it started performing better. But before using it on your project, I would still suggest testing a few shots; otherwise, you risk having holes without nails in them.Speaking of holes, observe that whether or not a nail is put, the nose pierces the wood with a tiny divot. Additionally, it also leaves a tiny indentation behind the size of the nose cap because pressing the nose against the wood is required for the trigger to function. On the softer wood I gave it a go, it works, at least. On harder wood, the imprint was less noticeable. It was considerably less obvious than my Crown Stapler in any case. When you don't want the nails to be obvious, headless pins are a smart choice. like the wood pallet table I constructed (for example).This collection is extremely high-quality all around. I've used tools from DEWALT, Makita, Porter-Cable, Milwaukee, and Bosch while working. Along with more affordable solutions, I've worked with Ryobi, Tool Shop, BLACK DECKER, and SKIL. The Metabo Pin Nailer unquestionably belongs to the first group. Unlike less expensive equipment used by weekend DIYers for sporadic projects, this one is made to withstand daily use on a construction site by contractors. But keep in mind that you are paying more for the quality (and portability). A lifetime warranty is also included.

Can you use a 23 gauge pin nailer on crown molding?

Yes, you can use a 23 gauge pin nailer on crown molding. The pin nails are thin enough that they will not split the molding, and the head is small enough that it will not be visible after the molding is installed.

Do pin nailers leave holes?

Most pin nailers will leave small holes in your workpiece, but these are usually barely noticeable and can easily be filled with putty or wood filler. In general, pin nailers are much less likely to leave unsightly holes than other types of nail guns.

Is a pin nailer worth it?

A pin nailer is a tool that is used to drive small nails into wood. Pin nailers are similar to brad nailers, but they are smaller in size. Pin nailers are useful for applications where a small nail is required, such as attaching trim or molding. Pin nailers are also useful for projects where the finish is visible and a small nail hole is desired. Pin nailers can be purchased at most hardware stores.

Should I use brad nails or finish nails for baseboards?

If you're attaching baseboards, you have two main choices for nails: brad nails or finish nails. Both have their pros and cons. Brad nails are smaller and less visible, but they may not be strong enough to hold the baseboard in place by themselves. Finish nails are larger and more visible, but they're strong enough to hold the baseboard in place by themselves. Which you choose depends on your preference and the weight of the baseboard. If you're not sure, ask a hardware store employee for help.

What is a 23ga pin nailer used for?

A 23ga pin nailer is a small, lightweight tool used to shoot very small nails, also known as pins. These pins are just slightly larger than a finishing nail, but much smaller than a brad nail. 23ga pin nails are typically used for attaching small trim pieces, baseboard, or crown molding. The small size of the nail prevents it from splitting the wood, making it ideal for delicate projects.

What is a pin nailer good for?

A pin nailer is a tool that is used to drive small nails into wood. This tool is good for projects that require small nails, such as trim work or cabinets. Pin nailers are smaller and lighter than regular nail guns, making them easier to maneuver and handle.